The French-Japanese autocontracene Renault-Nissan presented to the general public in 2009 - and almost immediately gained popularity among young people. However, they bought him and representatives of all generations - compact and relatively inexpensive crossover perfectly suitable for urban conditions and even allowed from time to time to make country trips - especially if you perform tuning silest owners And avoid real off-road. This car is in demand and among domestic motorists - and many of them are interested in which enterprise is going to Russian car dealerships.
World market assembly
Concern's production facilities are located in several countries - the total number of plants reaches 20. Cars collected on them are sent to Russia and to Europe, and to North America, and some percentage of vehicles are collected only for the inner Japanese market. However, the JUKE model from 2010 continues to release only two enterprises - in the city of Oppama (Japan) and Sunderland (United Kingdom). At each of these plants, thousands of copies of this popular crossover are collected annually.
The quality of the assembly of all cars manufacturer checks using departments technical control - Regardless of where the company is located. As practice shows, it is best to buy crossovers who are collected in Japan. However, domestic buyers are more interested in Sunderland, where they produce this car for the Russian market.
Table. 1. Components of the model Nissan Beetle for different countries.
Nissan Beetle for Russian Buyers
Enterprise autoconecern where is available Nissan Juke For Russia, located in one of the northern English counties, almost on the border with Scotland. The new crossover here began to collect relatively recently - a few years later than at the main factory. But the quality of the assembly of the bug almost caught up with Japanese - although there are also certain flaws.
The process of creating a car at the local factory occurs in several stages:
- A framework is made in the welding workshop, which is tested for marriage and welding quality;
- The design is sent first to painting, then on drying - processes occupying about 12 hours;
- If marriage was not allowed in previous stages, the car is going on the conveyor. The engine, transmission, electronics is installed on it, the interior layout occurs.
Upon completion of all stages, the crossover goes to export. From Sunderland, it is delivered not only to Russian car dealerships, but also in a number of European countries. And, although not all buyers suits exactly english assemblyShe is considered more profitable than supplies from Japan - distances to Europe, and up to most of Russia much less.
Differences from the Japanese assembly
According to the feedback from the domestic buyers of the model of the beetle, the options that are collected in English production facilities are slightly different for the worse. And, although the appearance of such a crossover is more attractive than the Japanese version and decoration of the cabin, it turns out more pleasant to the touch, drivers note such flaws:
- bad noise insulation;
- peeling paint in some places;
- hard and cream cheap plastic.
People inside the car are noted by constant creak - especially if you warm up to 70-80 km / h. Although this speed cannot be called high enough for trips outside the city. In the city, when such a "PARTNER" rarely recruits even 50-60 km / h, the screens and "crickets" are not as noticeable. But their very presence forces many motorists skeptically refer to the products of the plant in Sunderland, where Nissan Beetle collects for the domestic market.
At the same time, it is impossible to say that if another country was chosen for the assembly, the quality would be better. So, for example, if JUKE was released in Russia, defects could be even more. Although even the presence of certain disadvantages does not reduce the demand for this crossover whose popularity is much higher among the Russian youth than among middle-aged family motorists.
Where they collect Nissan Juke Updated: October 25, 2017 by the author: dimajp.
The Japanese car company with a rich history and an excellent position on the market today continues to develop, cooperating with powerful world manufacturers. Concern Nissan became one of the most powerful japanese manufacturers Machines, offering customers cars in different classes and with various technical specifications. Nissan also owns the Datsun brand, which has become known for Russian motorists in 2014. The market appeared budget sedan. This brand, going to the factory in Tolyatti.
Nissan does not seek to provide its buyers exclusively Japanese cars. This allows you to build assembly plants around the world and produce cars directly in those regions that need to be covered with products. This approach to production makes the companies of the company cheaper to the end user and more profitable for the corporation itself.
Recent years of development of Nissan Corporation
Of course, Nissan Corporation plants are present in fact on every continent, but the Russian potential buyer is interested in those production that can offer cars in the Russian market. In this case, we are talking about four enterprises.
The most productive and technological plants for the production of cars Nissan are located in the Japanese city of Yokocham and English Sunderland. It was from England that Nissan Cashkai was brought to us last generation. In Japan also produce all the most dear cars Corporations, productive SUVs. There is also a Russian enterprise that issues the Nissan model according to the principles:
- full cycle of assembling cars in compliance with the excellent factory quality of the car;
- permanent expansion model Row at the plant near Santk Petersburg;
- the introduction of advanced technologies for the productivity of the enterprise in Russia;
- incessant investment in the updating of the plant, in improving the assembly quality;
- building the number of cars manufactured and other principles of work of the global corporation.
At the end of last year, the company in Russia survived a number of litigation, which actually stopped the work of the assembly of cars. But against the background of a general fall in demand for primary transport, it looked quite a logical decision of the company's management.
If from the very beginning, only budget models were collected at the Russian assembly plant Nissan, today there are an assembly of such cars as Teana and X-Trail. And in the near future it is also planned to hold down the lines for the assembly of New Casca. This will make the cost of cars for the Russian market optimal.
Nissan Cooperation with other world companies
International cooperation began in the middle of the last century, when he led Volkswagen to Japan. I donate part of my capacities, Nissan received a huge profit from cooperation with the German Monster of the automotive industry. Companies until today support partnerships.
Since the 1970s, the recession of the Nissan enterprise begins, which leads to a decline in production, a significant decrease in the quality of car manufacturing. Solving the problem Corporation finds in cooperation with a successful RENAULT concern, which today owns more than 40% of the shares. The steps taken by Reno to save Nissan were as follows:
- the company was supplied to the European company with a clear understanding of crisis management;
- astronomical amounts of funds were poured into promotion and improving the quality of production;
- the continuous update of the technical arsenal of production workshops began;
- the company began to attract Japanese geniuses of technical thought, intercept staff from other enterprises;
- the main rate was made on the export of cars, which works until today.
In the domestic market, Nissan is quite difficult progressing due to the presence of incredibly strong competitors. And in other countries by reducing the cost and enhance the functional of its cars, the company promotes all offers model line. In today's conditions, Nissan is one of the most promising concerns of Japan.
Nevertheless, competitors constantly overtake the corporation and make it move forward. In Russia, cars japanese corporation have become more popular on secondary market, After all, the new cars are actively growing in price that I do not like customers. But the company's popularity still remains high enough, thanks to the non-standard solutions of the model line.
Basic accents of the model range of Nissan Corporation
The company's offer has budget models such as Almera or Sentra. These are quite decent cars that are sold by large parties and do not serve to raise the image of the corporation. They are very simple, possess only the necessary technologies in the equipment and offer the most necessary security systems and nothing more. But their affordable price attracts the buyer in the economy segment.
Also in the company's offer there is premium transport, which is presented, for example, representation sedan Teana. And the big crossover Murano. This allows the company to expect customer favor in different price categories. Crossovers are represented by budget terrano and traditional X-TRAIL passable, but the most active attention is attracted by the following representatives of the model line:
- Juke - Compact Parquetnik with incredibly bold design that has become good experiment companies;
- Qashqai is one of the most popular representatives of the Compact crossover class with a great price;
- Pathfinder - real SUV with good technical characteristics and comfortable salon;
- Patrol is a legendary SUV, which was revived several years ago and gained the highest popularity;
GT-R - sports coupeoffering an incredible engine high power and excellent design;
Navarra is one of the largest Pickup-SUVs in its class with functional technology.
As you can see, the model range of the company is quite wide, which allows the brand to advance in different segments. Most of the corporation cars please their buyers high technologies and a fairly high-quality inner world, excellent materials and a successful layout. Machines are as modern as possible and meet the most sophisticated demands of the buyer.
Of course, not all the proposals of the company Nissan are perceived by buyers well. Among the proposals of the corporation there are cars that did not meet their hopes. For example, the Budget sedan Almera after the upgrade in 2012 should have become one of the most popular in its class, but he could not overcome strong competition from European sedans.
We offer to watch the test drive of the new Nissan Centra with all its pros and disadvantages:
Let's sum up
Japanese Nissan Corporation has an interesting story And offers wonderful cars buyers. Almost all models came out from under the wing of this company can be called purebred and unusual. Surdi most notable common characteristics The latest models of the manufacturer are excellent forms, pleasant design, good materials and the highest travel comfort. Even if we are talking about simple budgetary machines.
The company is not chasing the price of its cars, offering more democratic price tags than major competitors. This is one of the main factors that makes many potential buyers seriously look at the cars presented. How do you personally feel about the Nissan concern and its modern model line?
Concern Nissan Motor Co., Ltd. - Manufacturer of Nissan cars, whose sales are conducted in many corners of the planet.
More than 80 years of existence of the company managed to earn a good reputation and build many plants engaged in the release of cars.
In which countries is the auto brand Nissan? Are these cars in Russia are made? And if yes, is it possible to count on high quality? These moments will consider in the article.
General information about Nissan
Nissan Motor Co., Ltd. Leads activities since December 1933.
The new brand became the result of the association of two less large organizations called Nihon Sangø and Tobat Imono. Since June 1934 new concern Received the name "Nissan Motor".
Together with production cars Nissan. Motor Co., Ltd. Engaged in the development of rocket engines and even the construction of ships. But the main activity still remains cars.
Since 1958, supplies in the United States started, and another six years to Europe. By 1976, Nissan became the leader in the number of cars sold, the number of which exceeded the mark of 20 million copies.
In 1981, an agreement was signed with Volkswagen, which gave an additional impetus for production growth. In 1992, Nissan accounted for 17% of all cars in Japan.
By the mid-1990s, the company faced serious problems financially, which forced it to sell a part of Renault shares (44.4% of shares). In May 2016, Nissan bought 34% of Mitsubishi shares.
Today, Nissan Motor Co., Ltd. Many automotive firms in South Africa, Mexico, Japan, United States and other countries belong to South Africa. The total number of employees exceeds 160 thousand people.
In the last twenty years, work is underway to create hybrid machines and electric vehicles.
Nissan Motor Co., Ltd. Works in many directions and just some of them:
- Marine - making ships and engines for ships;
- IWAKI is a motor manufacturing company;
- Nismo - refinement and tuning machines.
In Russia, the company's cars are sold since 2004. This year it was the discovery of Nissan Manfechchuring Rus LLC.
In 2005, more than 46,000 cars were sold on the territory of the Russian Federation, and another year sales increased by another 70%.
The construction of the plant near St. Petersburg began in 2007, and the first test assembly was organized in the early 2009th.
Initially, Tiana and X-trail were produced at the factory. Over time, the production of other models, including Murano, was established.
In 2013, the release of almers in Tolyatti started. Another year later, Datsun was made on the basis of grants.
Where to collect Nissan Qashqai (Cascai) 2016, plants in Russia
On the territory of Russia, Nissan Cascai is collected since 2009 (the plant is under St. Petersburg). There is enough cars to cover 35 percent of the market, and the rest comes from abroad.
So, the car Nissan Qashqai. Collected in the following countries:
- United Kingdom (Sunderland);
- Japan (not far from the main office of the manufacturer);
- Russia - AvtoVAZ (Tolyatti) and at the factory near St. Petersburg.
A common issue of car owners concerns the quality of the Russian assembly. Despite stereotypes, many prefer a product domestic production.
And the reason here is not desire to support the domestic manufacturer, but in the adaptation of the machine to modern roads.
In the Russian version of Nissan Qashqai, the suspension was strengthened, there are more durable discs and improved the level of comfort (in binding to bad roads).
This SUV is many called the king of roads, due to the ability to absorb all irregularities, all-time qualities and reliability.
The English version is distinguished by installing motors with greater efficiency and details of increased strength.
By the way, Nissan Qashqai cars from Britain are not fully. For example, hybrids and diesel engines are sold in the world, only gasoline versions are available in Russia.
Terrano (terrano), plants in Russia
Car Nissan Terrano. - One of the relatively new cars that appeared on sale since 2013.
Previously, the TERRANO called other cars. In particular, from 1986 to 2004 the car was sold under the name of Nissan Pathfinder.
Interestingly, in the Russian Federation and the CIS countries the terrano, having the steering wheel on the right side, uses the greatest demand. Since 2013, the car is made under the current "name", but on the basis of Renault Duster. In Russia, the car appeared a year later, in 2014.
Today, the production of cars has been established in three countries - India, Spain and Russia. At the same time, each state, as a rule, works for domestic market With a small share of exports abroad.
In 2013, NISAN and the Autofarmos plant in the Russian Federation concluded an agreement on the production of terrano on machine-building factory (Today he is in full possession of the company Renault).
Previously, a well-known "Moskvich" was produced here.
The first Nissan Terrano descended from the conveyor in 2013, and in 2014 a large car party was put in the manufacturer's salons.
Before the start of production in Russia, the car was brought from Spain. You can find a car from Europe to the Russian Federation today, but already in smaller quantities. The production itself is conducted near Barcelona.
Despite the European assembly, the owners of the Spanish version of Nissan Terrano have complaints to the quality of the car. In particular, problems are associated with noise insulation and low welding quality.
As for cars of the domestic production produced on "Autoframos", there are no special complaints here.
Few people know, but initially Nissan terrano was created for buyers from India, which led to the construction of the plant in Oragadam.
Dacia Duster cars were also produced here, as well as followed by exports to Ireland and England.
Another place that the company has chosen is India, where the "lion" share of the model range of Nissan - Micra, Evalia, Sunny and others is produced.
As for the terrano, it was built on the duster base. The only thing has undergone changes - the interior, exterior and, as a result, the cost vehicle.
X-Trail (x Trail), plants in Russia
No less attention deserves compact crossover from japanese brand entitled .
The production of the machine started in 2000, and the most popular FF-S platform lay down.
Seven years later (in 2007), the release of the second generation of the car started, but another platform was already at the heart - Nissan C.
After six years (in 2013), the world saw the third generation Nissan X-Trail, but already on the basis of CMF.
The car is most suitable for family people who need a spacious and reliable crossover.
The highest advantages of Nissan X-Trail include high quality assembly, safety and good. specifications. At the same time, the place of production deserves the greatest attention.
Like a number of other models, Nissan X-Trail is manufactured in three countries. The first plant is located in the city of Sunderland (United Kingdom).
Machines released here are designed for old light car owners. In Russia's car dealerships nissan version X-Trail almost does not fall.
The second country where the model is produced - Japan. There are several factories on its territory. From them cars fell to the market of the Russian Federation until 2009.
At the same time, there were no complaints about the Japanese assembly. The Japanese version of the car is distinguished by a reliable body and trouble-free "hodovka". The only disadvantage is the problem with noise insulation.
The third country is produced by Nissan X-Trail - Russia. Machines of this brand are made under St. Petersburg since 2009.
Today the plant covers more than a third of the needs of the domestic market. At the same time, there are no problems with local production cars.
Masters from Russia continued the trend of manufacture of cars 4x4. The produced models did not lose in beauty, quality and sophistication.
Interestingly, Nissan X-Trail made in Russia, on the luxury of the interior decoration, even ahead of their Japanese colleagues.
With the beginning of the production of X-trail in the Russian Federation, the domestic consumer won noticeably, because the car became more affordable and optimized for low quality roads.
Despite the lack of complaints, after the beginning of the release of the Russian Nissan X-TRAIL, some consumers abandoned this model, considering the local assembly of the problem. In fact, all this stereotypes.
In which countries and where they collect Almera (Almer), plants in Russia
On the territory of the Russian Federation the car includes top 10 for sales for many years. Pros - decent build quality, relatively low price, high level of comfort and safety.
Over the years of release, the car changed four generations, and each new car had to do with consumers.
Despite the slight decline in popularity, Nissan Almera is still afloat and is in demand among domestic car owners.
The assembly of Nissan Almer is conducted in three countries:
- United Kingdom (Sunderland). As already noted, cars produced in England are most popular and in demand by connoisseurs of this brand.
- Japan. In addition to cars, components are produced in the country. By the way, the original spare parts for Mark Nissan cars have in most part Japanese roots.
- Russia (AvtoVAZ, Togliatti). Here, the production of Nissan Almera cars started after combining Renault.
For Russia, Nissan Almer is produced at AvtoVAZ since 2012. Since the launch of domestic production, many car owners refused to buy this model, referring to the low quality of the Russian assembly.
But such comments are not justified, because Russian production has been perfectly perfect, and there is nothing to complain here. There is also a cycle for the manufacture of details for Nissan Almera.
It is worth noting that in Russia only the assembly is conducted, and the main parts are coming from the UK. That is why the final result is not very different from the British version.
Moreover, the domestic version of Nissan Almera is better prepared for trips to our roads and "lives" longer.
For some time, the car was going to South Korea, at the Samsung plant, but already in 2013, production was stopped due to a number of reasons ( high costs on the production, the need to transport parts and other problems).
Tiida (Tiida), plants in Russia
Car Nissan Tiida. - A popular model that is distinguished by reliability, compactness and accessible to domestic car enthusiasts. Start sales falls for 2004.
The name of the machine is translated as the "sun" or "dawn of a new day" (depending on the Japanese dialect).
More than a third of Nissan Tiida cars presented in the Russian market is made within the country.
To speak as a whole, Tiid is going to England, Japan and the Russian Federation. Sales of cars in Russia started since 2007. At the same time, until the 2014 car was collected in Mexico, after which it was supplied to the dealers of the Russian Federation. Also Nissan Tiida is produced in Japan and Thailand.
Since 2014, Nissan Tiida was started at the Izh Auto plant on the basis of the Central platform. That is why the car comes to our market with a motor with a volume of 1.6 liters, as well as power in 117 "horses".
As for quality domestic assemblyThere are no special complaints. Already in the database, the buyer receives the necessary package of options.
Special attention deserves noise insulation, ensuring the maximum comfort of movement.
The main difference of the model russian production (if compared with european version) are some changes in the cabin.
As for the shortcomings, wipers working inefficiently and leaving the top of the glass are increasingly mentioned here.
One more minus - availability fan injectors The glass ward, which eliminates high-quality cleaning of glass in motion.
In which countries and where they collect Juke (beetle), plants in Russia
Nissan Juke - Compact japanese crossoverwhich was presented in 2009, in Geneva.
In Russia, the car is sold, starting in 2010. For all the time of sale, this model has not lost popularity and uses well-deserved demand.
Hundreds of people take part in the creation of the machine and this is despite the fact that most of the production is automated.
The average time for the manufacture of one car is 60 hours. After the completion of the work, the car passes a full test drive, after which it goes to Russia.
Domestic car owners can choose another option - the purchase of Nissan Juke production of Great Britain.
Here every worker on average produces up to 105 cars per year, and a large proportion of this figure accounts for "Beetle".
This model is produced in Sunderland relatively recently, and the main feature of the English version is greater attention to the beauty of the cabin.
In this case, the general drawback is elevated level Noise with speed set.
In which countries produce spare parts for Nissan cars, plants in Russia
All car spare parts are divided into original and non-original.
For Nissan cars original details Made in Japan, Great Britain and a number of other countries that received the English franchise.
Such states can be attributed to Holland and India.
The market of non-original spare parts is considered much more, which, despite many stereotypes, have no less quality.
Such goods can be produced under the manufacturer's brand or under other brands.
The most popular companies engaged in the production of non-original spare parts are:
- Bosch is a German firm, producing starters, motor control systems, relays, voltage regulators and other nodes.
- DEPO - Taiwanese manufacturer who is engaged in the manufacture and production of optics for the Nissan machine. Part of the spare parts for Nissan cars is done in Russia. So, in 2016, exports of bumpers for X-trail to Europe began. Manufacturer - factory with a company in St. Petersburg.
- On the dividing partition in motor compartment;
- On the left side on the instrument panel (the numbers can be seen under the windshield);
- On the right side member in front;
- Under the legs of the passenger.
- 1N4, 1N6, 5N1 - USA;
- 3N1 - Mexico;
- 7B2 - New Zealand;
- KNM, KNN - Korea;
- Jn0-jn8, jnb, jnc - japan;
- VSK - Spain;
- SJN - Britain;
- LJN - China.
The main difference is the high quality and affordable price. Today, the company produces bumper for a large group of models - Cascai, Murano, X-trail and others.
An option of production and supplies to Europe of other body elements (hood and doors) is also considered.
How to determine the country the manufacturer on the wines code?
In completion, consider how to determine the manufacturer Nissan on the wines code.
To begin with, it is worth it that the number of VIN is formed from three parts - WMI, VDS, VIS (global index, the descriptive part and the distinctive part, respectively). We are interested in the first code.
By the way, the VIN code can be applied:
If the machine is made for Europe, the WMI decryption has the following form:
Below is shown Vin number Nissan Almera.
As can be seen from the article, the geography of the production of cars Nissan is very wide, and with an increase in the popularity of the brand, more and more plants appear, where high-quality and reliable cars are produced.
For Russia, Nissan Cascais 2017 is one of the most popular cars, he has established himself to high quality, affordable price. The manufacturer who wants to conquer the market and make their cars more accessible, always seeks to organize production in the territory of the country that actively purchases the goods. An exception is not a concern Nissan. So, where do the 2017 production cars produce?
History of the creation of the plant
Until 2008, Nissan was not released in Russia, the car was brought from abroad, but in 2009 there were own production - Nissan Manfechchuring Rus. The plant is located not far from St. Petersburg.
Production is under the strict control of the Japanese concern: quality is monitored, the new batches of machines are tested regularly.
However, in the territory of Russia, Casca with russian assembly Not a monopolist. You can buy a car collected elsewhere: such a variety is explained by the fact that the capacity of the St. Petersburg plant is missing, the demand exceeds the proposal. If you wish, you can find a car collected in Japan, but its cost will be significantly higher, as it is necessary to pay the customs duty when importing.
Countries where Nissan is produced
The question of which Nissan Cascai is collected, interests many buyers, as it is believed that the quality of the car directly depends on this. However, it is worth noting that the models produced in Russia are not inferior to Japanese.
Nissani produced in the Russian Federation are only 35% of the total amount of this model sold in the Russian markets. Production has been established in the following countries: Japan, England, Russia. In addition to the corporate plant, Cascai is going to AvtoVAZ factories.
Two modifications are available for the Russian market, both have gas engine, volume of one - 1.6 liters, second - 2.0 liters. You can choose a version with the usual mechanical box Transmission or modern variator. The model with the variator appeared in 2016.
Is there any difference in quality?
Do in three countries, is there a quality assembly depending on where production is located? The concern intently monitors subsidiaries and plants on which the assembly is being built. The Japanese regularly test each batch, check for marriage.
Nissan, whose image is well known worldwide, demanding about quality, so you can buy any car. Russian will cost cheaper, as they do not have to customize them.
It should be noted that our country is one of the leading markets for sales of Nissan cars throughout the world. IN Russian Federation Autocontracene Nissan sells one and a half of its models, including Nissan Note., Almera, Tiida, Teana, Juke, Qashqai (Qashqai + 2), Murano, X-Trail, Pathfinder, Navara, Patrol, GT-R, as well commercial cars NP-300 and Cabstar.
Since 2009, the first Nissan plant in Russia is functioning - "Nissan Manofechchuring Rus" - near St. Petersburg, where a number of company models are produced today - Teana, Murano and X-Trail. At the same time, about 35% of all sold cars Nissan are collected in Russia.
In general, it should be noted the plants where Nissan cars are collected for subsequent importation to Russia:
- Plant in Sunderland in United Kingdom
- Directly Plant in Japan
- Plant "Nissan Manfechchuring Rus" in St. Petersburg
- Factory AvtoVAZ in Tolyatti, where the assembly of Nissan models began after uniting autocontrace with its French competitor - Renault.
Nissan plant in St. Petersburg
Where are the Nissan Almera (Almera Classic)?
One of the best and selling state employees in our country and one of oldest models Nissan, produced since 1995, from recently (since 2012) in Russia at the factory in Togliatti at the Avtovazovsky factory, which caused a whole crowd of indignations of potential buyers of this model and should be honestly noted, it was the AvtoVAZ assembly that one part of the model lovers and brands.
But her Korean "Brother" - Nissan Almera Classic., the production of which stopped back in 2013, was gathered at the Samsung Plant in South Korea.
Where are Nissan Qashqai collect?
Nissan Cascai is one of the best-selling crossovers in our country. More than two million cars have come down from the conveyor since the launch of the model in 2007. At the same time, each new Nissan Qashqai becomes wider and longer, but it is easier and more efficient, the more earlier generation. This is an excellent addition to russian market crossovers with such advantages as big practicality effective engines And a pleasant interior.
Unlike the predecessor, Nissan Cascai is not yet collected in Russia - the original assembly of the model for the Russian and European market is carried out at the plant in Sunderland of Great Britain. However, only a limited number of modifications of this popular crossover comes to Russia - so, the Russians can be content with only gasoline engines.
Where are Nissan Teana?
The class of full-size vehicles was replenished in Russia in 2003, when the Teana came to Russia, which now became one of the favorite and popular models among many motorists. For a long time, Nissan Teana gathered in Japan, and "purebred" Japanese and Japanese people were supplied to Russia. However, with the launch of the auto plant on the assembly near St. Petersburg, the tan assembly for Russia rolled out here, following the trends of the modern automotive market in a similar class - Recall that Toyota of the same class as TEANA - Camry and Avensis also moved to the assembly to our country.
In addition, the assembly Nissan Teana. For a number of other markets is also held in Japan and Thailand.
Where are the Nissan Juke?
But since the 2014 model year, Pathfinder is collected in the same St. Petersburg factory in Russia, although the previous generations of the machine were brought to us from Spain.
Where are the Nissan Patrol?
Real SUVs without excess are becoming increasingly rare today. In fact, most buyers want appearance and the practicality of crossovers, and not an amazing behavior on the crossed terrain of the True Offrouds. But in the case of Patrol, everything is completely different - this is exactly the car that is intended for operation in the harshest conditions. A long cycle of three-and-five-door models gradually evolved into sufficiently beautiful and functional machines. The big step was made in 2004, when Nissan Patrol was equipped with a revolutionary new body, significantly upgraded the interior and included more equipment.
But the main advantage of the patrol is that in Russia this is the first truly purebred Nissan on our list - for our country, Nissan Patrol is going exclusively in Japan and more nowhere ... at least as long as.
Where are Nissan Navara collect?
But the famous Nissan Pickup, quite rarely renewed as a filling and exterior, is going for Russia in Spain (as once gathered in Spain Nissan Pathfinder).
Where they collect Nissan cars - Summary Table
| Model Nissan. | Country assembly |
|---|---|
| Nissan Micra. | Great Britain |
| Nissan Almera. | Russia (AvtoVAZ) |
| Nissan Almera Classic | South Korea |
| Nissan Tiida. | Mexico |
| Nissan Note. | Great Britain |
| Nissan Teana. | Russia |
| Nissan Juke | United Kingdom and Japan |
| Nissan Qashqai (Qashqai + 2) | Great Britain |
| Nissan X-Trail | Russia |
| Nissan Pathfinder. | Russia |
| Nissan Navara. | Spain |
| Nissan Murano. | Russia, Japan |
| Nissan Terrano. | Russia |
| Nissan Patrol | Japan |
| Nissan Cube. | Japan |
| Nissan GT-R | Japan |
| Nissan models not supplied to Russia | |
| Nissan Primera. | Japan |
| Nissan Maxima. | Japan |
| Nissan Sunny. | Japan |
| Nissan Skyline. | Japan |
| Nissan Tino. | Japan |
