Kia Cerato / Kia Cerato general information

A car for city life Kia cerato The 2nd generation has been produced since 2008. In Korea and the United States, this car is called the Kia Forte. The car has a discreet, classic design appearance, excellent technical characteristics and a high level of comfort for both driver and passengers. The buyer's choice is offered by two gasoline engines of 1.6 liters (126 hp) and 2.0 liters (143 hp) with a VVT system that regulates valve timing. VVT system significantly increases efficiency and reduces the level of harmful emissions into the atmosphere. Everything Kia engines Cerato is equipped with a five-speed manual or four-speed automatic transmission.

In Russia, the car is offered in three trim levels:
- Comfort
- additional brake light, rear fog lights, two airbags, anti-lock braking system ABS, child lock on back doors, central locking, immobilizer, steering column height adjustment, driver's seat height adjustment, heated rear-view mirrors, power-operated exterior mirrors, power-operated front and rear power windows, tinted windows, body-colored rear-view mirrors, audio system with RADIO + functions CD + MP3, AUX and USB, six speakers, steering wheel audio control, air conditioning, trip computer.
- Luxe (in addition to Comfort equipment)
- fog lights, side airbags + curtain airbags, steering column adjustment for reach, leather trim of the steering wheel and gearshift knob, electric folding side mirrors, automatic control lighting, heated front seats, light-alloy wheel disks, tires 205/55 R16;

Prestige (in addition to Luxe equipment)
- ESP stabilization system, rear-view mirror with automatic self-dimming, Supervision dashboard, anti-pinch function, climate control, parking sensors, SMART KEY system with start / stop button, alloy wheels, tires 215/45 R17 ...
Kia body Cerato load-bearing, all-metal, welded construction with hinged front fenders, doors, hood and trunk lid (tailgate). Windscreen and rear glass (tailgate glass) glued in. The driver's seat is adjustable in the longitudinal direction, the backrest tilt and height, the front passenger seat - in the longitudinal direction and the backrest tilt. The front and rear seats are equipped with height-adjustable head restraints. The rear seat backrest can be folded in parts in a ratio of 40:60.

The transmission is made according to front-wheel drive scheme with front wheel drives equipped with constant velocity joints. Front suspension, MacPherson type, independent, spring, with stabilizer lateral stability, with hydraulic shock absorbers. Rear suspension semi-independent, spring, with hydraulic shock absorbers. Brake mechanism front wheels are disc, ventilated, with a floating bracket, rear wheels- disk, with a floating bracket. The braking system is equipped with vacuum booster... The steering is traumatic, with a gear-rack type steering mechanism, with a hydraulic drive. Steering column adjustable in height and reach. A front airbag is located in the steering wheel hub. All cars are equipped with inertial diagonal and seat belts for the driver, front passenger and passengers on back seat... A frontal airbag is provided for the front passenger.

servicing Kia and Hyundai

Why visit us:

Car service "Auto-Mig".

We do absolutely everything in terms of car repair Kia brands and Hyundai. Our employees have vast experience and a large number of satisfied customers, all work is in line with the manufacturer's recommendations. In view of this, trusting us, you seem to be giving the repair to the manufacturer.

Our service provides high-quality repair services for your car, offering the most reasonable prices in terms of price / quality ratio, so those who contact Us never return with the problem they came with, choosing from now on “Auto-Mig” constantly. We strive to provide the best possible repair safety for whatever we undertake.

Serving with us, you already in advance give the technical transport to serve much longer without breakdowns.

"Auto-Mig" is a guarantee of reliability and stability of your car in any conditions.

Worth noting, modern korean cars, not old copies of the Japanese, these are first-class cars of different class, and are repaired in a special way, they already have their own history and it is possible to repair qualitatively using only professionally thought-out technologies.

Our auto technical center provides the following services:

• full diagnostics of internal combustion engines, gearboxes and electronics;
• diagnosing individual nodes, directions;
• repair of any complexity;
• air conditioner maintenance (troubleshooting, refueling);
• identification of incomprehensible breakdowns, due to which other service stations refuse and subsequent elimination.

We have the most advanced equipment to help you repair your vehicle better than anyone else, increasing the level of work done to the maximum.

We work on all Kia and Hyundai models, check the details by contacting any of our technical centers.

Repair of Kia in the AutoMig Car Service

(examples of work performed):

Repair Hyundai in the Auto-Mig Car Service

(examples of work performed):

Repair of commercial vehicles in our technical center:

Many Korean cars used by firms are small trucks Porter and Bongo. And for passenger transportation, usually Stareks H-1 and Carnival. For these fleets, we also offer our cordial approach and maximum attention.

• We work by bank transfer
• We conclude contracts
• We provide everything Required documents For accounting

Service of commercial vehicles

(examples of work performed):

Checking the car before buying

• We will help you to buy a car without "pitfalls". Checking the machine before buying will make sure it is in accordance with the technical condition declared by the seller.

And just a little more about our technical center:

Our specialists will repair the engine and suspension of almost any degree of complexity. We use official electronic catalogs and follow the repair technology exactly. When conducting renovation works we use spare parts only from well-known manufacturers, which we purchase directly from importers, which ensures their low cost.

In the ‘AutoMig’ car service you can repair the brake system of your Kia or Hyundai using quality materials and according to the manufacturer's technology.

Come, we will be happy to help you!

The site contains a collection of color wiring diagrams Kia car Cerate of the second generation in Russian. You can download electrical circuits for free. For a full-scale enlargement of the photo, click on it.

• If you are interested in the first generation of cars, then see article I (2003-2009).

KIA Cerato II history and characteristics

The Kia Cerato 2 car was presented to the world in October 2008, but in North America and in Europe it was renamed the Kia Forte, in Singapore it was the Kia Cerato Forte, and in Malaysia it was the Naza Forte.

The car went on sale to the Russian and Ukrainian markets only in 2009. KIA Cerato II has been significantly changed compared to its predecessor: the changes affected both the body and the engine with transmission. Our compatriots could buy a car with gasoline engines, like the USA and Europe: 1.6 L (126 hp) and 2.0 L (143 hp) were available for sale. The Cerato II car is produced in 3 bodies:

• 4-door sedan (most popular), dimensions: L x W x H - 4480 x 1775 x 1460 mm
• 5-door hatchback, body dimensions: L x W x H - 4530 x 1775 x 1460 mm
• 2-door compartment, dimensions: L x W x H - 4340 x 1765 x 1400 mm

The transmission on the Kia Cerato 2 was produced from 2008 to 2011 with a 4-speed automatic transmission and a 5-speed manual transmission, and from 2011 to the present day, 6-speed manual and automatic gearboxes have already gone into the configuration.

Specifications Kia Cerato 2 (1.6 CVVT):

• Engine - G4FC, 4-cylinder, in-line, working volume 1591 cm3
• Power - 126 HP, 154 Nm
• Front-wheel drive
• Curb weight of the sedan - 1169? 1246 kg
• Clearance - 150 mm
• The volume of the fuel tank is 52 L
• Maximum speed (manual transmission / automatic transmission) - 190/173 km / h
• Acceleration from 0 to 100 (manual transmission / automatic transmission) - 10.3 / 12.0 sec
• Gasoline consumption Kia Serato 2 with manual transmission (city / extra-urban / mixed) - 8.6 / 5.5 / 6.6 liters per 100 km of run
• Gasoline consumption with automatic transmission (city / extra-urban / mixed) - 9.5 / 5.6 / 7.0 liters per 100 km

Specifications KIA Cerato II (2.0 CVVT):

• Engine - G4KD, 4-cylinder, in-line, displacement 1975 cm3
• Power - 143 HP, 186 Nm
• Front-wheel drive
• Curb weight of the sedan - 1219? 12966 kg
• Ground clearance - 150 mm
• Fuel tank - 52 L
• The maximum speed of Kia Serato 2 (manual transmission / automatic transmission) - 208/200 km / h
• Acceleration from 0 to 100 (manual transmission / automatic transmission) - 9.0 / 10.4 sec
• Gasoline consumption with manual transmission (city / extra-urban / mixed) - 10.2 / 5.9 / 7.5 liters per 100 km
• Gasoline consumption with automatic transmission (city / extra-urban / mixed) - 11.3 / 6.4 / 8.2 liters per 100 km

Video about the crash test Kia Serato 2:

Technical documentation KIA Cerato II

1. Detailed accurate specifications KIA Cerato II, as well as a system for the location of components and assemblies in engine compartment, and below the auto:

2. Regulation of technical Kia service Serato 2 - when (after what amount of mileage "km" or time) and what needs to be checked and / or changed on the car:

3. Elements of the G4FC engine (1.6 l), the engine block and the crankshaft:

4. Tightening torques of critical threaded connections Kia Cerate 2:

5. Lamps that are used on KIA vehicles Cerato II (their types, power and where they are installed):

Mounting blocks and wiring diagrams Kia Cerate 2

1. Location of fuses in mounting blocks what are in the KIA Cerato II cabin and engine compartment - how to get to them. Description of circuits that are protected by fuses - their name, color value, for which the fuse and the amperage are responsible in A. Removal and installation of mounting blocks with step-by-step actions:

2. Electrical circuits Kia Cerato 2 - 1.6 liter engine management systems (G4FC) and 2.0 liter (G4KD):

3. Basic wiring diagram for charging the engine and car battery:

Introductory information

• Content

  
  Daily checks and troubleshooting
  Vehicle operation and maintenance manual
  Precautions and safety rules when working on a car
  Basic tools, measuring devices and methods of working with them
  The mechanical part of the engine (1.6 l)
  The mechanical part of the engine (2.0 l and 2.4 l)
  Cooling system
  Lubrication system
  Supply system
  Engine management system
  Intake and exhaust systems
  Engine electrical equipment
  Clutch
  Manual Transmission
  Automatic transmission
  Drive shafts and final drive
  Suspension
  Brake system
  Steering
  Body
  Passive safety
  Air conditioner and heater
  Wiring diagrams and connectors
  Trouble Codes (DTC)
  Explanatory dictionary

• Introduction

  INTRODUCTION

  In 2009, a new generation of Kia Cerato, known in Europe and the United States as the Kia Forte, was shown at the Chicago Auto Show. New car built on the new Hyundai-Kia front-wheel drive platform (it will also form the basis for the next generation Hyundai elantra). The exterior of the new Cerato (which dealers call Cerato New) was created under the leadership of European Peter Schreier, the current chief designer of Kia, who previously worked with VW and Audi. Perhaps this is why the car is not like other Asian cars. However, the Cerato New is still not a European car, because when it comes to the popular golf class, Western Europe chooses hatchbacks and station wagons, and Kia has filled this niche with versions of the Cee’d model. Fans of sedans, among others, are the residents of the United States, on which the two-door modification of the KIA Cerato Koup, which appeared a little later, is primarily focused on.

  

  The spacious two-tone interior looks rich and matches the exterior. The build quality and interior trim materials are excellent. Comfortable steering wheel with buttons remote control the audio system, the controls located in their places, as well as large instruments with bright illumination make driving comfortable and pleasant.

  

  Thanks to the fact that Cerato New has added 40 mm in width and base, three passengers can comfortably fit in the back seat in the cabin.

  

  Cerato New is at the height and practicality. The already roomy trunk (415 liters) can be increased by folding the backrest of the rear seat in parts.

  

  Ruler power units the new Kia Cerato New / Forte is represented by two gasoline engines with a working volume of 1.6 and 2.0 liters and a capacity of 126 and 156 hp, respectively. For the American market, the Kia Forte is also offered with a 2.4 liter engine.
  All engines can be equipped with either a five-speed manual or a four-speed automatic transmission. A five-speed gearbox is offered for the American market.
  The MacPherson strut front suspension is unified with the Cee’d hatchbacks, but the rear Cerato New does not have a multi-link design, but a simpler semi-independent with a twisted beam.
  As standard, the vehicle is equipped with a hydraulic booster, front disc and rear drum brakes. On request, you can order an electric booster and disc rear brakes.
  New Kia Cerato New is offered in 11 colors and three possible trim levels: LX, EX and SX. Basic configuration includes ABS, dual front airbags, leather steering wheel, power windows, electric drive and heated outside mirrors, heated rear window, air conditioning, MP3 audio system, USB-port, 15-inch steel wheels and a spare spare wheel. The steering column in the basic configuration is adjustable only in height, and the reach adjustment is available only in more expensive modifications.

  

  In addition, more expensive configurations offer ESP, side airbags and curtain airbags, climate control, fog lights, light sensor, heated front seats, parking sensors, sunroof, leather trim, cruise control, door unlocking and keyless engine start - buttons, 17-inch alloy disks.
  High build quality, reliability, economy, modern design and practicality for a reasonable price make the Kia Cerato / Forte the ideal car for everyday use.
  This manual provides instructions for the operation and repair of all modifications of the Kia Cerato New / Forte, as well as the Kia Cerato Koup / Forte Koup, manufactured since 2010.
  

  Kia Cerato New / Forte
  1.6 Body type: sedan Engine displacement: 1591 cm3	Doors: 4 KP: mech. / Author.	Fuel: AI-95 gasoline
  2.0 Years of issue: from 2010 to the present Body type: sedan Engine displacement: 1998 cm3	Doors: 4 KP: mech. / Author.	Fuel: AI-95 gasoline Fuel tank capacity: 52 L
  2.4 Years of issue: from 2010 to the present Body type: sedan Engine displacement: 2359 cm3	Doors: 4 KP: mech. / Author.	Fuel: AI-95 gasoline Fuel tank capacity: 52 L
  Kia Cerato Koup / Forte Koup
  1.6 Years of issue: from 2010 to the present Body type: coupe Engine displacement: 1591 cm3	Doors: 2 KP: mech. / Author.	Fuel: AI-95 gasoline Fuel tank capacity: 52 L Consumption (city / highway): 9.1 / 5.5 l / 100 km
  2.0 Years of issue: from 2010 to the present Body type: coupe Engine displacement: 1998 cm3	Doors: 2 KP: mech. / Author.	Fuel: AI-95 gasoline Fuel tank capacity: 52 L Consumption (city / highway): 9.4 / 6.9 l / 100 km
  2.4 Years of issue: from 2010 to the present Body type: coupe Engine displacement: 2359 cm3	Doors: 2 KP: mech. / Author.	Fuel: AI-95 gasoline Fuel tank capacity: 52 L Consumption (city / highway): 10.7 / 7.4 l / 100 km

• Emergency response
• Exploitation
• Engine

Operating manual for Kia Cerato since 2010 Controls, dashboard, equipment salon Kia Cerato since 2010

2. CONTROLS, INSTRUMENT PANEL, INTERIOR EQUIPMENT

GENERAL VIEW OF THE SALON

1. Button for locking / unlocking doors. 2. Control switch for setting the outside rear-view mirrors *. 3. Power window lock button *. 4. Switch for centralized control of door locks *. 5. Switches for controlling electric drives of window lifters *. 6. Light control knob dashboard*. 7. Button for disabling the ESP system *. 8. A device for adjusting the angle of inclination of headlights *. 9. Windshield defroster button *. 10. Lever for adjusting the tilt of the steering wheel *. 11. Lever for opening the hood lock. 12. Clutch pedal *. 13. Brake pedal. 14. Gas pedal. 15. Lever to open the trunk. 16. Lever for opening the fuel filler flap.

Note
* - in the presence of

GENERAL VIEW OF THE INSTRUMENT PANEL

1. Dashboard. 2. Control of lighting devices / direction indicators. 3. Control of wipers / washers. 4. Sound signal. 5. Steering wheel audio controls *. 6. Governing bodies of the cruise control system *. 7. Driver's front airbag *. eight. Wheel... 9. Ignition lock * / Engine start / stop button *. 10. Digital clock. 11. Warning signal. 12. Audio system controls *. 13. Microclimate control system. 14. Gear shift lever. 15. Cigarette lighter *. 16. Port for connecting optional audio device, USB device and iPod *. 17. Socket *. 18. Heated seats *. 19. Front passenger airbag *. 20. Glove box.

DASHBOARD

1. Tachometer. 2. Fuel level indicator. 3. Speedometer. 4. Indicators of direction indicators. 5. Control and indicator lamps. 6. Trip odometer / odometer *.

1. Tachometer. 2. Fuel level indicator. 3. Speedometer. 4. Indicators of direction indicators. 5. Control and indicator lamps. 7.LCD display * (trip odometer / odometer *).

Note
* - in the presence of.Note
The actual instrument cluster in the vehicle may differ from that shown in the illustration.

INSTRUMENT PANEL LIGHTING (IF PRESENT)

With included side lights and headlights, rotate the illumination control knob to set the brightness of the instrument panel illumination.

The brightness of the instrument panel illumination (type B) can be adjusted by turning this knob in any position of the headlamp switch when the ignition switch is in the ON position.

SPEEDOMETER

The speedometer shows the vehicle speed. It is labeled in metric units (km / h).

TACHOMETER

The tachometer shows the approximate speed of the vehicle's engine in revolutions per minute (rpm). Use a tachometer to the right choice the moments of gear shifting to prevent the unstable operation of the engine or its operation at an increased speed. When the ignition key is turned to the "BATTERY" (ACC) or "ON" (ON) position with the engine off (OFF), a slight movement of the tachometer needle is possible. This is normal and does not affect the accuracy of the tachometer when the engine is running.

ATTENTION
The engine is not allowed to operate at a frequency corresponding to the red zone of the tachometer. This can cause serious engine damage.

FUEL LEVEL INDICATOR

The fuel gauge shows the approximate fuel level in the fuel tank. In addition to the fuel gauge, the vehicle is equipped with control lamp low level fuel that ignites when fuel tank almost empty. On slopes or curved road sections, movement of fuel in the tank may cause the fuel gauge needle to wobble. In this case, the low fuel level indicator lamp can blink or start to burn constantly ahead of time.

ATTENTION
Fuel level indicator.
Running out of fuel can endanger people in the vehicle. After the low fuel level indicator light comes on, or the arrow on the fuel gauge approaches the 0 / E point, you must stop as soon as possible to refuel.ATTENTION
Avoid driving if the fuel level is very low. Lack of fuel can misfire and overload the catalytic converter.

The odometer indicates the total distance that the vehicle has traveled. It can also be helpful in determining when periodic maintenance is due.

Note
It is prohibited to interfere with the operation of the odometer on any car with the intention of changing the value of its mileage recorded on the odometer. Doing so may void your vehicle's warranty.
The quantity full run is displayed continuously unless the display is turned off.

ON-BOARD COMPUTER (IF AVAILABLE)

On-board computer is a microprocessor-based information system that, when the ignition is on, displays driving data such as total and current mileage, fuel supply, average speed, driving time and average fuel consumption. All stored driving information (excluding fuel capacity and current fuel consumption) is reset when the battery is disconnected.

Briefly press the "TRIP" button (holding it for less than one second) to select one of the following functions:

TRAVEL ODOMETER

In this mode, the display shows the distance that the vehicle has traveled since the last trip odometer was reset.

The working range of the pointer readings: from 0.0 to 999.9 km. Holding down the "TRIP" button for more than one second when the display is in the mileage display mode (TRIP A or TRIP B) will reset the trip odometer (0.0).

DISTANCE WHICH A CAR CAN TRAVEL WITH THE AVAILABLE STOCK OF FUEL IN THE TANK (KM)

In this mode, the on-board computer shows the estimated distance that the car can drive with the available fuel in the tank, based on the data on the amount of fuel in the tank and fuel consumption. If the value of this indicator is less than 50 km, an empty line (-) will appear on the display, and the indicator will start flashing. The working range of the pointer readings: from 50 to 999 km.

AVERAGE FUEL CONSUMPTION (L / 100 KM)

In this mode, the on-board computer calculates average consumption fuel based on the amount of fuel consumed and the distance traveled since the last time the readings were reset. The value of the total fuel consumed is determined based on the fuel consumption data received by the computer. Optimal calculation accuracy is achieved when driving over a distance of more than 50 m. Holding the "TRIP" button pressed for more than one second when the display is in the average fuel consumption display mode will reset the readings (---).

CURRENT FUEL CONSUMPTION (IF OPTIONAL) (L / 100 KM)

This mode calculates the current fuel consumption over the last few seconds.

AVERAGE SPEED (KM / HOUR)

This mode is used to determine average speed vehicle movement since the last time the readings were reset. Even if the vehicle is stationary, the average speed continues to count as long as the engine is running. Holding down the "TRIP" button for more than one second when the display is in the average speed display mode will clear the reading (---).

TRAVEL TIME

In this mode, the display shows the total time the vehicle has been on the road since the last time the readings were reset. Even if the vehicle is stationary, the driving time continues as long as the engine is running. The working range of the pointer readings is from 0:00 to 99:59. Holding down the "TRIP" button for more than one second when the display is in the travel time display mode will clear the reading (0:00).

Note
If the vehicle is on an uneven surface or if the battery has been disconnected, the function of determining the distance that the vehicle can travel with the available fuel in the tank may not work accurately. The on-board computer may not take into account refueling if the volume of the filled fuel was less than 6 liters.
Fuel consumption (if equipped) and the distance that the vehicle can drive with the available fuel in the tank may vary depending on driving conditions, driving mode and vehicle condition.
The distance a vehicle can travel with the available fuel in the tank is an estimate of the distance that the vehicle can actually travel. This value may differ from the actual value of the possible mileage.

CONTROL AND INDICATOR LAMPS

When the ignition key is turned to the ON position, the serviceability of all warning lamps is checked (do not start the engine while doing this). Any lamp that fails to light should be checked by an authorized KIA dealer. After starting the engine, check that all warning lamps have gone out. If any of them remain lit, this indicates a situation that requires attention. For example, when unlocking parking brake the parking brake warning lamp should go out. The low fuel level warning lamp will continue to illuminate if the fuel supply is insufficient.

AIRBAG CONTROL LAMP (IF EQUIPPED)

This indicator light comes on for about six seconds each time the ignition key is turned to the ON position. This lamp also comes on if there is a malfunction in the airbag system. If this lamp does not come on or remains lit after 6 seconds after turning the ignition key to ON or starting the engine, or if it comes on while the vehicle is in motion, have an authorized KIA dealer check the status of the airbag system.

ANTI LOCK BRAKE (ABS) MONITOR LAMP (IF PRESENT)

This lamp comes on when the ignition key is turned to the ON position and goes out after about three seconds if the system is working properly. If this lamp continues to burn after turning on the ignition, lights up while driving, or does not light up after turning on the ignition, this indicates possible malfunction ABS systems. In such a situation, contact an authorized KIA dealer as soon as possible to check the condition of the vehicle. The vehicle's braking system will continue to function, but without anti-lock braking system support.

ELECTRONIC BRAKE DISTRIBUTION DISTRIBUTION (EBD)

If, while driving, two warning lamps light up at the same time, the car is faulty and ABS system, and the EBD system. In such a case, the ABS system and the main braking system may not operate normally. Contact an authorized KIA dealer as soon as possible to check the condition of the vehicle.

ATTENTION
If the anti-lock braking system and the brake system malfunction indicators illuminate at the same time, the vehicle's braking system will not function properly when braking suddenly. In this case, driving at high speed and heavy braking should be avoided. Contact an authorized KIA dealer as soon as possible to check the condition of the vehicle.Note
If the ABS or EBD warning lamp comes on and remains on, it may indicate a malfunction of the speedometer or trip odometer / odometer. In such a situation, it is necessary to contact an authorized dealer of the K \ A company as soon as possible to check the condition of the vehicle.

SAFETY BELTS WARNING

As a warning to the driver, this indicator light will flash for approximately six seconds each time the ignition key is turned to the ON position, whether the seat belts are on or not.

As a warning to the driver, this indicator light will flash for approximately six seconds each time the ignition key is turned to the ON position, whether the seat belts are on or not. If the driver's seat belt is unfastened after turning the ignition key to the ON position, this warning lamp will flash for about six seconds. If the driver's seat belt is not fastened when the ignition key is turned ON, or if it is unfastened after the ignition key is turned ON, the warning buzzer unfastened seat belt security will work for about six seconds. At the same time, if you fasten your seat belt, the buzzer will stop working.

As a reminder to the driver, the driver's seat warning light comes on approximately six seconds after each ignition is switched on, whether the seat belt is fastened or not. If, before turning on the ignition, the driver has not fastened his seat belt, and also if he unfastened it after turning on the ignition, the seat belt warning lamp comes on and remains on until the seat belt is fastened.

If, with the driver's seat belt not fastened, the speed exceeds 9 km / h, the constant mode of turning on the warning lamp will change to flashing, which will remain until the speed drops below 6 km / h. If the speed exceeds 20 km / h with the driver's seat belt not fastened, a warning signal (bell) will sound for 100 seconds, accompanied by a flashing of the seat belt warning lamp.

TURN INDICATORS

Flashing green arrows on the dashboard show the direction shown by the direction indicators. If such an arrow lights up but does not blink; flashes more often than usual or does not light up at all, this indicates a malfunction of the direction indicator system. To fix it, contact an authorized dealer. The pointer also starts flashing when the warning switch is on.

HIGH BEAM CONTROL LAMP

This lamp lights up when the headlights are switched to high beam or when they are switched on for a short time. high beam using the turn signal control knob.

LOW ENGINE OIL PRESSURE CONTROL LAMP

This lamp indicates low pressure in the engine lubrication system. If it lights up while the vehicle is moving:

1. Carefully move to the edge of the carriageway and stop.

2. With the engine off, check the oil level. If the oil level is below normal, add oil as required.

If this warning light continues to illuminate after adding oil to the engine, or if oil is not available, contact your authorized KIA dealer.

ATTENTION
If you do not turn off the engine immediately after the warning lamp comes on low pressure oil in the engine, this can cause serious damage.
If the low engine oil pressure warning lamp remains on while the engine is running, this could result in serious injury. This lamp comes on if the pressure in the lubrication system drops below normal.
Normally, it lights up when the ignition is turned on and then goes out after starting the engine. If the low oil pressure warning lamp illuminates while the engine is running, this indicates a serious malfunction.
In such a situation, stop the vehicle as soon as it is safe to do so, turn off the engine and check the oil level. If the engine oil level is below normal, add oil to the normal level and start the engine again. If the lamp stays on while the engine is running, shut it off immediately. In any case, if the low oil pressure warning lamp remains on while the engine is running, before starting the engine again, contact an authorized K! A dealer to check the condition of the vehicle.

PARKING BRAKE AND LOW BRAKE FLUID CONTROL LAMP

Parking brake warning

This warning light comes on when the parking brake is on and the ignition switch is in the START or ON position. When the parking brake is released, this warning light goes out.

Low level warning brake fluid

If this warning lamp remains on, it indicates a low fluid level in expansion tank brake system. If this indicator lamp remains on:

1. Move carefully to the nearest safe place and stop the car.

2. With the engine off, immediately check the brake fluid level and top up as required. After that, check all elements of the brake system for leaks.

3. It is not allowed to continue the movement of the car if leaks were found, if the control lamp continues to burn, or if the operating mode of the braking system is abnormal. The vehicle should be towed by an authorized KIA dealer to have the braking system checked and any necessary repairs carried out.

This vehicle is equipped with a dual diagonal braking system. This means that even in the event of a failure of one of its lines, the brakes on two wheels of the car will be in working order. In such a situation, to stop the car, it will take more brake pedal travel and more effort on it.

In addition, the braking distance of a vehicle with only part of the braking system working will be longer than normal. If the brakes fail while the vehicle is in motion, downshift for engine braking and stop the vehicle as soon as it is safe to do so. To test the operation of the parking brake and low brake fluid warning lamp, make sure it illuminates when the ignition key is turned to the ON position.

ATTENTION
It is dangerous to drive while the warning lamp is on. If the brake warning lamp continues to illuminate, immediately have an authorized KIA dealer check the brake system and carry out repairs.

FRONT FOG LAMP CONTROL LAMP (IF PRESENT)

This lamp comes on when the front fog lights are on.

REAR FOG LAMP INDICATOR (IF PRESENT)

The indicator lights up when the rear fog lamps are turned ON.

SELECTED GEAR INDICATOR

This indicator shows the position of the shift lever automatic box gear.

ENGINE TEMPERATURE CHECK LAMP (IF PRESENT)

The coolant temperature warning lamp operates with the ignition key in the ON position. If the coolant temperature exceeds 120 ± 3 ° C, the lamp lights up red. If the coolant temperature is less than 55 ± 3 ° C, the lamp lights up blue. Do not drive with an overheated engine. If engine overheating occurs frequently, read the Overheating section alphabetically.

Note
When the red coolant temperature warning light comes on, the engine is overheating and can damage it.

When the electronic key is in the vehicle, when the engine start / stop button is moved to the ACC (Accessory) or ON position, the warning lamp comes on and stays on until the engine is started. If there is no electronic key in the car, when the engine start / stop button is pressed, the warning lamp will flash for a few minutes, reminding that you will not be able to start the engine.

If the engine start / stop button is toggled from the "ACC" position to the "ON" position with no electronic key in the vehicle, the indicator will flash for several minutes to indicate that the engine cannot be started.

In case of low battery level battery When the engine start / stop button is pressed, the warning lamp will flash and you will not be able to start the engine. In this case, you will still be able to start the engine by placing the electronic key in the holder. In the presence of malfunctions of parts associated with the electronic key system, the indicator lamp flashes.

LOW FUEL LEVEL CONTROL LAMP

This lamp indicates that the vehicle's fuel tank is almost empty. In such a situation, it is necessary to refuel the vehicle as soon as possible. Continuing to drive with the low fuel level warning lamp on, or when the fuel gauge needle is below the "0" mark, may result in a misfire in the engine cylinder and damage to the catalytic converter (if equipped).

ENGINE FAULT MONITORING LAMP

This warning lamp is part of the engine management system that monitors the status of various components of the emission control system. If this lamp comes on while the vehicle is moving, this indicates a possible malfunction in this system. In addition, this lamp comes on when the ignition key is turned to the ON position and then goes out a few seconds after starting the engine. If it comes on while the vehicle is moving, or does not come on after turning the ignition key to the ON position, contact your nearest authorized KIA dealer to check the system status. In general, the vehicle may be moving, but you must immediately contact an authorized KIA dealer to check the status of the system.

ATTENTION
Prolonged driving with the emission control system malfunction indicator illuminated may damage the emission control system components, which will affect the vehicle's performance and / or fuel consumption.
If this lamp comes on, it indicates the possibility of damage to the catalytic converter, resulting in a loss of engine power. Have an authorized KIA dealer check the engine management system as soon as possible.

This warning lamp comes on when the ignition key is turned to the ON position and should go out within about three seconds. When ESP system enabled, it monitors the driving conditions of the vehicle. If conditions are normal, the warning lamp for this system is off. When entering slippery road surface or when the grip of the tires decreases with the road, the ESP system starts to work. At the same time, its indicator lamp starts blinking, informing about the operation of this system.

This lamp comes on when the cruise control system is activated. The cruise control indicator on the instrument panel comes on when you press the cruise control ON-OFF button on the steering wheel. When you press the cruise control ON-OFF button again, the indicator goes out.

Cruise control SET warning lamp

This lamp comes on when the cruise control function switches (- / SET or RES / +) are moved. The "SET" cruise control indicator lamp on the instrument panel lights up when the cruise control switches (- / SET or RES / +) are pressed. This lamp does not come on when the cruise control CANCEL switch is pressed or when the cruise control system is turned off.

BUZZER OF REMINDER ON THE PRESENCE OF THE KEY IN THE IGNITION LOCK (IF THE OPTION IS AVAILABLE)

If you open the driver's door with a key in the ignition switch (in the ACC or LOCK position), the corresponding buzzer starts working. This is to prevent the keys from being left in a locked vehicle. It works until the key is removed from the ignition switch or the driver's door is closed.

ELECTRIC STEERING WARNING LAMP (EPS) (IF INCLUDED)

This warning lamp comes on when the ignition key is turned to the ON position and goes out after starting the engine. This lamp also lights up when there is a problem with the EPS system. If it lights up while the vehicle is moving, have an authorized KIA dealer check the vehicle.

The Korean car industry, as you know, has long conquered almost all markets in the world. And, of course, one of the Kia models brought its zest to this conquest - this is the KIA Cerato. This car was not originally conceived as a top-class car and is designed for the average consumer, which accordingly affected the quality and durability of individual components and assemblies. Therefore, like other cars of this class, Kia Cerato, unfortunately, has a number of weaknesses, diseases and shortcomings that every future buyer needs to know about.

Weaknesses of the 2nd generation Kia Cerate

• Rear springs;
• The tensioner and the timing chain itself for cars with a 1.6 liter engine;
• Solenoid relay;
• Clutch release bearing;
• Steering rack;
• Water pump and thermostat.

Now in more detail ...

Rear springs.

We can say that the springs on the Kia Cerate are one of the weak points. They are not at all designed for the weight carried in the stern (rear passengers and cargo in the trunk) of the car. Accordingly, during frequent trips with a loaded rear of the car, the rear springs tend to sag or, in the worst cases, simply break. When inspecting a car before buying, it is imperative to pay attention to this nuance.

Timing chain tensioner for vehicles with 1.6 liter engine.

The timing chain is a fairly serious element of any car that requires constant maintenance and inspection. But in addition to the state of the chain, in any case, it is necessary to periodically check its tension, and accordingly the tensioner is responsible for the tension of the timing chain. It is through the fault of the tensioner and the stretching of the chain itself that an unpleasant phenomenon can occur - this is a jump of the teeth and, accordingly, a possible meeting of valves with pistons. Before buying, it is imperative to check the tension of the chain, or otherwise you will have to change it, but it changes, as a rule, together with the tensioner and it will cost more than a penny. The characteristic sign of a loose chain is the "diesel" sound of the engine running.

Solenoid relay.

The retractor relay is another of Kiy Cerato's sores. Of course, we can say that this is a design miscalculation, but you need to know about this before buying. The essence of the problem is that the grease in the solenoid relay is in winter time thickens significantly and, accordingly, it is difficult to start the engine. Therefore, this car is not fully adapted to the severe Russian frosts.

Release bearing on vehicles with manual transmission.

No less common Kia problem Cerate is release bearing clutch. The essence of the problem is that very often the owners of Cerato struggle with the whistle of this bearing. And, unfortunately, until now there is no effective way out of the situation with the whistling of the bearing. Replacing or treating the surface with a special lubricant can help, but it is important to know that this will help, but not for long. When checking the car, this can be noticed, but in the future it will not be possible to eliminate the whistle for a long time. This can also be attributed to a design defect.

Steering rack.

If, for example, the resource of the steering rack of many cars is about 100 thousand km. mileage, the KIA Cerato has two or even more times less. Knocks and leaks of the rail can appear even when the car runs within 40-50 thousand km. after the last replacement or repair. Typical signs of a rack malfunction are knocks on the steering wheel when driving over bumps or in place when the steering wheel is rotated.

On the cooling system.

Considering that the 2nd generation Cerato has not been produced for three years already, the average mileage of the currently sold car will be from 60 to 110 thousand km. Consequently, within this range, the thermostat and pump may need to be replaced. It is important to note that these mechanisms are not weak points, but it is necessary to pay attention to this.

Disadvantages of KIA Cerato 2008-2013 model year

1. Weak insulation;
2. Low clearance;
3. Hard plastic interior;
4. Rigid suspension;
5. Crickets in the cabin after a run of 20 thousand km;
6. Some ergonomic miscalculations.

Output.

In conclusion, I would like to remind the saying that due to the shortcomings this car"every man to his own taste". But it all depends on the individual requirements of the owner and on the cars previously driven by him. But it's important to know that Kia Cerate is not a favorite. positive sides among its competitors of other brands and models. The most important thing when buying this car is, in addition to the above-described weaknesses, to thoroughly check all the systems, components and assemblies of the purchased car yourself, or, ideally, at a car service.

P.S: Dear present and future owners, do not forget to describe your second generation Kia Cerato in the comments, indicating sore spots and shortcomings!

Was last modified: October 17th, 2019 by Administrator

Category

MORE USEFUL AND INTERESTING ABOUT CARS:

• - Jeep Grand Cherokee 3rd generation (WK) has long been known in the car market. The first models rolled off the assembly line in 2005. The release lasted for 5 ...
• - Surely everyone is real or future owner car is interested in possible weaknesses and shortcomings of his present or future ...
• - It cannot be argued that the Volkswagen Tuareg is brutal and attractive car in terms of size and design. But, as you know, the car ...

10 posts per article “ Weaknesses and weaknesses of the second generation Kia Cerate”

1. spring girls

   A very useful article. Indeed, almost all problem areas lighted. Add, if only, anther bumpers that rattle in the cold. Just changed the retractor relay. (Kia Cerato, 2009, 108,000 km. run).

2. Alexey

   Kia serato2, 2012 mileage 110 t.km
   The starter retractor relay has recently failed.
   changed the stabilizer rods by 60 thousand.
   "Crickets" settled in the stove,
   I remembered the front pads by almost 100 thousand. That's all for now!
   scored on the officials after the first MOT, bullshit guarantee.
   I change the oil after 10 thousand. The rest is according to the regulations.

3. Alexey

   The disadvantages include a very large turning radius (due to the small twist of the wheels).

4. Yuliya

   Kia Serato, 2011, 90,000 km. Passed 6 TO. I disagree with Alexey, the steering rack was changed for 40 thousand km under warranty. During the operation of the car, nothing really broke. Of the little things, if only: the buttons on the steering wheel jam, the handbrake, well, probably that's all. I am very happy with the car, I am not a racer, the equipment is luxurious, there is just enough. I change the oil every 10 thousand km. The trunk is really big, but you can't load it so much, since the springs are weak. A friend did just that, the spring burst. And since the car is good, I recommend it.

5. Denis

   Mileage 160000km. in the car except brake discs nothing changed, and put the spacers on the rear springs. I'm happy with the car.

6. Peter

   Cerate 1.6 manual transmission 2011 mileage 117 thousand km. changed only the air conditioning compressor (factory defect). 100 thousand replacement links (consumable). THAT according to the regulations is not at the OD. I think all the positions listed in the article can be attributed to any car. The car is reliable and not whimsical.

7. Cons

   Serato 2011, 1600, 6MKPP, mileage 240,000km. For the first 20,000 I stopped recognizing the key (replacement of the immobilizer under warranty). 50,000 replacement of the front struts (put some Chinese, cheap, go to this day). 100,000 oil change in the box (just changed). 110,000 front pads (this is in Moscow!). 160,000 replacement levers. 180,000 the gas pump was covered (a simple Boshevsky motor for 1.8 tr was supplied). 190,000 partially went through the chassis (thrust bearings, bones, tips, rear shock absorbers and little things (eg, the rear pads are native)). 230,000 have ceased to buzz headlights. I don’t want to go to the OD, but for some reason the self-made women cannot understand where the electricity went to them. It's just that I haven't done it yet - I've been driving 10,000 already (the left headlight shines normally, the right one shines “for myself.” 240,000 I'm going to change the timing chain, but there are no particular signs of wear. In general, I am satisfied, a normal workhorse.

8. Alexander

   Cerato 2012. 6vrgg / 1.6 / mileage 60000. Didn't change anything, some consumables. Satisfied with the car, no crickets. I think to go to the lift - there was a small knock, it looks like a rail. I changed 3 times the bulbs. I put the spacers, I got up, it’s better to ride in the pits. Good luck to everyone and great personal happiness.

9. Denis

   To all good day! I own a 2010 Kia Cerate (Korean). During the operation since 2012 (in my hands) I bought 34,000 km with a mileage, today the mileage is 152,000 km. For all the time, I changed the timing twice and everything that comes with it. The steering rack is in excellent condition. Everything else is consumables (brake pads, silent blocks, anti-roll bar struts, shock absorbers in a circle with new springs). Replacement internal combustion engine oils in 5-7 thousand. All other slurries according to the regulations. That seems to be all !!! V common car I do not experience any special problems.

10. Rashid

    Very often tears, return hose, on the power steering