The fog light (PTF) is the necessary part of the external image of the car. It is more important that such lights should cover the driver of the road space even in heavy rain and blizzard. The item is obliged to disperse a white or light yellow tone, which forms a beam of a horizontal direction, waving over the track. The design of them is such that they do not affect the upper layers of fog, and it means that the visibility improves. In the event of a breakdown and desire to independently repair the lights, the owner will need a kit for connecting PTF on Vesta with wires, relays and special stakes. This includes a bracket.
On a note!
On most of the latest products from AvtoVAZ there are holes and fasteners for the installation of PTF, but the plant itself is practically not installed. There are numerous complaints about fog lights from the manufacturer. Car owners note that the lighting from them is very weak. Hence the rational resolution: it is better to buy high-quality PTF on Vesta and their own installed them.
How to work fog
In contrast to conventional long-distance or dipped, which creates a translucent waterproof to rain, complicating visibility, PTF with its specific range of action is sufficiently illuminated by the road fabric. In addition, the fog of Lada Vesta plays a positive role for counter drivers in difficult meteorological conditions. To ensure excellent visibility in a blizzard, heavy rain, etc. PTF is developed in the following specifics:
- It has a sufficiently clear upper facet of the light beam. It follows that lighting and reflection does not rise above the minimally necessary horizontal threshold.
- The fog lights of Lada Vesta must be installed closer to the road itself, since there is always a clean interval of the atmosphere between the track and layer of foggy pellets, where and the wide beam should penetrate.
Choosing foglights on Lada Vesta
First of all, make sure that the products you purchase are assessed:
- The body of the product must be tightly fastened and assembled. The tightness of the fog lights increases the service life and avoids the extra visits to the dealerships. The material material should be immune to severe weather conditions.
- Quality fog lights are equipped exclusively glass lenses. Plastic - a very fragile material and breaks when the most minor stone is hit when the vehicle is moved.
- For the light filter, the details are recommended yellow, which is best cuts for long waves of light during thick fog. If there is a feeling that this solution is spoil appearanceYou can stop the choice on specific lamps.
- The latter, but not much to significance, the criterion will be the possibility of paging PTF. In this case, when breakdown, it is enough to change the lamp, and not to acquire a new one.
Installation of fog lights on Lada Vesta
To change the burned element, you should purchase a complete set of PTF and ensure yourself freedom at its placement. There are two ways:
- The first is simple and runs in two bills. Afterverting the wheel in the middle, you can find the space where the fog lights of Lada Vesta are. However, if it is impossible to unscrew the screwdriver using a screwdriver, you should resort to a more complex method.
- To gain full-fledged access to the installation site and adjustment fog lights Lada Vesta, you need to dismantle the front wheel.
The housing of the light element is located on the rig itself, plastic, which is mounted on the car body arch and protects it from dust and dirt.
- To replace the whole block, you will need to unscrew four screws with a hexagon.
- After that, you should disconnect the element from the wires. The installation of PTF on Lada Vesta has some difficulties, so there is an opportunity for about 800 rubles to give the car to the masters.
Most lovers may have a question: how to install PTF brackets? This requires tools and screws. After the installation of tumanks is completed, adjust the angle of the light of light.
In order to get directly to the old burned lamp and connect the working, you just need to rotate the hatch on the cover of the inner wall of the housing counterclockwise. To unscrew it, you need to turn the element in the opposite direction. Pressing the locks, easily remove the burnt item.
Causes of PTF breakdowns
Installation of the fog is made in the event that they were not in factory execution or if necessary. Lanterns are connected to the network separately from the main optics. In the event of a fault, the fog is needed to carry out the following manipulations:
- The first thing is checked by the fuse in the part itself. After driving it from a special niche, consider the element for the presence of burnt or torn wires. If necessary - change.
- In most cases, the wire system is rupture. The ammeter helps here, which will show the absence of voltage.
- If the main optics does not work with PTF, the problem takes on a large character, ranging from the accumulated battery and reaching the headlight wiring.
- When incapacity for one of the fog, the reason you need to look for in it.
On a note!
Very often, the owners carry out the installation of new equipment instead of the factory. White light filters of foglights Lada Vesta from the manufacturer are completely ineffective in heavy snow and fog. To secure flashlights on the housing included brackets. Xenon instead of halogen should go along with a special curtain so as not to blind oncoming drivers.
Where to buy fog lights Lada Vesta
Detail in a wide variety is available on Internet sites and in dealerships. When buying, you must remember all the criteria that can not be gone with the choice.
- On the Lada Vesta. You should not put lights with the index higher than H-11, this may lead to wiring;
- a thick-walled lens is best suited as glass, which does not reflect light and not blinding oncoming cars.
The price of fog lads of Lada Vesta varies in the range from 250 rubles to 3,000. Work on the change of lamps is about 1,000 rubles. Installation with your own hands and the connection of PTF will cost cheaper, but will require some effort.
In the popular Russian model Lada Vesta, fog lights have only luxury variation. In the remaining modifications and equipment in the bumper there are special plugs that close the niches to install PTF. You can carry out the installation procedure at the dealer, but it is not suiced. Not every owner will dare to such a step, so optimal option It is an independent acquisition and installation of a PTF set. However, we will tell you how to install headlights.
How need fog optics?
Lighting equipment of this purpose allows you to improve the conditions for a safe movement. Especially acute this moment is felt in bad weather when the visibility of the road is significantly reduced. It is important not only to establish effective fog lights, but also to adjust them correctly. Enhance visibility contributes to the dispersion angle and a powerful light beam. Other drivers will easier notice the car with the fog lights included.
Also at night, fog lights have proven their effectiveness, since they allow the driver to see the situation not only in the immediate vicinity of the bumper, but also by roadbrains.
We affect aesthetics. In this regard, Lada Vesta, equipped with additional lighting, looks more harmonious in comparison with the car, in whose bumper is sadly "sit" plugs.
The cost of mounting PTF at the dealer?
The official representative offices of AvtoVAZ consider the installation of lighting equipment as a refinement of the equipment of the car Lada Vesta to the level maximum configuration. The cost of the procedure reaches 60 thousand rubles.
The transcendant price is due to the complexity of the process of a dealer method, which also involves the use of parts of the original production. Only some cables will cost the owner of about 20 thousand rubles. Therefore, many car owners are interested in how to install headlights personally.
Handy installation Allows you to accrue a significant savings. The only unpleasant moment here may appear possible cancellation of warranty support.
How to choose the right headlights and materials to them?
The highest quality indicator has the original set of headlights produced by the "Valeo" brand (code: "FCR220029"). These devices have the cost of 3 thousand rubles. For a couple.
If this price scares the buyer, you can choose products from "DLAA", and it is almost twice as cheaper. If you wish to establish xenon options for PTF, you should study in detail the experience of the owners and material on this issue.
Important! It should not be inclined to buy cheap options, since the quality of them is far from ideal, and the cases of melting are not so rare.
Next important elements Set are brackets for fasteners. For two products will have to lay out about 700 rubles.
Now consider other products present in the kit:
- button to turn on or off headlights;
- relay;
- cables with plastic corrugated shell and switching connectors;
- fuse (current - 16 A).
For the designated set of sellers "ask" about 600 rubles.
Also additionally should be purchased for PTF. For 2 pcs. The owner will have to part with 800 rubles.
In general, the purchase of the PTF set will require a budget in the amount of at least 5 thousand rubles. All specified products are available in the warehouses of most online stores, which makes the purchase of an operational event.
How to install fog optics for Vesta?
Installation with your own hands implies the implementation of several stages:
- dismantling of the bumper;
- preparatory manipulations S. landing places;
- installation of headlights;
- installation and subsequent connection.
We dismantle the bumper in Lada West
The product is sufficiently massive, so when removing there is a risk of damage to the LCP. Here we use all available precautionary measures.
- Turn off the battery and remove it.
- The place where the removed bumper from Lada Vesta is stacked, prepare in advance, spreading soft tissue.
- The lower edge of the bumper is attached to the lingers by means of 4 self-tale. They are subject to unscrewing.
- Also unscrew the two screws with which the product is connected to lockers.
- The upper perimeter of the bumper is held by six bolts, which also dismantle.
- Unscrew a couple of bolts under a number sign.
- I pull the body element on yourself, gradually giving him the opportunity to get out of the engagement with the side brackets.
Preparing landing niches and fasteners
- As already mentioned, at the places of future PTF there are plugs. Crown with a diameter of 76 mm cut into these products holes. If the owner of Lada Vesta acquired facing panels of the headlights, this stage is skipped.
- Go to the brackets. They are fixed on the bumper with ordinary self-draws.
- Construct a hole for the button. To do this, we investigate the front panel in the cabin and are determined with the optimal place for the switch. Alternatively, the button can be positioned on the center console near the button responsible for unlocking the luggage compartment.
Connect PTF by car Lada Vesta
- From the right lighting device, the wiring is packed inside the box.
- The Lada Vesta salon cables are served through a hole present near the pedal node.
- Connection We perform on a simple and universal scheme. The meal is borrowing from the battery, we switch first with the fuse, and then with the contact relay.
- Plus contact comes out of the mounting unit, or rather the fuse of the overall light. Alternatively, "Plus" can be taken from the cigarette lighter.
- The relay should be installed in the sub-compartment of Lada Vesta (can be in the cabin).
The installation is completed with your own hands. The considered method of switching is not only simple, but also allows you to achieve minimization of intervention in on-board network Auto.
Let's summarize
Installation with your own hands of such an element in a car, as PTF in Lada Vesta allows you to save a lot of money (not one tet of thousand). Auxiliary materials and adaptations to establish fog lights will require the owner to part with 5-6 thousand rubles. On the implementation of the procedure will take several hours, but now the car will not only look profitable, but also provide improved visibility in bad weather and at night.
Lada Vesta is equipped with fog lights only in the luxury configuration. The remaining versions of the car have special plugs under their installation. This can be done at the dealer, but many car owners refuse such an option due to large prices. Therefore, the kit for connecting PTF on Vesta has to be purchased and installed independently.
Safety road - above all! Installation of fog in Vesta will improve this indicator (provided proper adjustment) During bad weather conditions when visibility is noticeably reduced. Due to the corner of the dispersion and the power of the light beam of these headlights, the driver sees the road better. Yes, and other motorists easier to notice such a car.
PTF is also useful at night, allow you to avoid dangerous situations on the roads, since the driver can see not only space in front of the machine, but also outside the border or curb.
From aesthetic point of view, Lada Vesta looks expressive and solid.
How much does the dealer stand on the installation of fog lights for Lada Vesta
Installation of fog lights on Lada Vesta from an official representative of AvtoVAZ is considered as partial refining of the machine to the top one. Usually such a procedure is not cheaper than 60 thousand rubles.
This transcendant amount is due to the complexity of the "dealership" installation method and the need to use original details from AvtoVAZ. One dashboard wires will cost about 20 thousand rubles.
Therefore, the installation with your own hands will allow to save well. The only trouble is in this case the warranty support of the car can be canceled.
Choice of headlights and necessary materials
The most qualitative option is the original PTF production of VALEO (article: FCR220029), worth up to 3000 p. For a set of 2 pieces. You can buy fog lights from the company DLAA, which will cost two times cheaper. If you decide to put xenon, then it is impossible to give the unequivocal council - orient to your own experience.
Doubtful penny headlights are better not to take - there are cases when they simply melted.
Next, without which it is not necessary - these are brackets to which the headlights will be attached. For two pieces you need to give about 700 p.
- button On / Off Fog Headlights;
- contact relay;
- wires with plastic corrugation, all the necessary connectors and adapters for connecting;
- 16 amp fuse.
Such a set costs about 600 p.
Additionally, PTF cladding is bought (800 r. For 2 pcs.) If there is no desire to cut the native.
Thus, the price of fog headlights on Lada Vesta with all components for their installation will be approximately 5000 p. Buy all this in online stores will not be difficult.
Installation PTF on Lada Vesta
This process includes the following steps;
- removing the bumper;
- preparation of landing place;
- installation of headlights;
- pTF connection.
It seems to be easy, but we will analyze it all more.
The front is enough massive, and it can be easily damaged, so producing disassembly, do not forget about caution.
First, disconnect and pull out the battery. Also be sure to prepare the place where you put the bumper is enough to lay a rag so that its surface is not damaged.
The lower part is fastened with four bolts to the body and four screws to the fenders. All this needs to be turned.
Over the sides, unscrew two self-pressing fastening it to lockers.
Under the hood, remove six bolts upper fastening to the body.
It remains to extract two bolts under license plates. Here you already need to hold the bumper for the beam. Gently pull it on yourself to launch with side brackets.
Now you have access to the right place, and it's time to move to the next stage.
Preparation of landing places and fixing headlights
In place of the fog stands are the factory plugs. Using a crown by 76 mm in them it is necessary to cut holes. For these purposes, the stationery knife will come. If you have been facing for fog lights in Lada Vesta, then this stage is skipped.
To figure out how to install PTF brackets, you will not need a lot of time. They should be simply fixed on the bumper using self-tapping screws.
It is also necessary to take care of the opening under the PTF button in the car torpedo. To do this, you can choose a place on the center console or next to the opening button of the trunk.
Connecting fista-brain
From the right PTF, the wiring is paired inside the metal box. In the salon from the engine compartment, the wiring is passed through a special hole in the area of \u200b\u200bthe pedal node.
Connect fog lights the easiest way to the universal scheme, as when connecting the equipment on the previous auto line of the Lada. Loading is taken from the battery (bolt M6) and through the fuse is fed to the contact relay.
Plus comes from the mounting unit from the gabar fuse. Alternatively, you can use plus cigarette lighter.
The relay itself is installed under the hood or directly in the cabin.
This method of connecting PTF in Lada Vesta is the most optimal economy in terms of savings and minimal interference in the electronic part of the car.
Conclusion
Installing tumankas for Vesta with your own hands will save a couple of tens of thousand rubles. A set of everything you need will cost no more than 5000-6,000 rubles + a few hours of your time.
Fog on the road - a phenomenon is frequent, so the modern car is difficult to imagine without foglighting headlights (PTF) that increase the safety of driving with poor visibility.
Lada Vesta is a modern sedan, and the need to equip it with this optics is also obvious, but the fog lights are installed by the manufacturer only on the top version of the model, in the basic configuration in the front bumper, only removable plugs with design sites are provided for independent equipment Car PTF.
The coma of that full-time running lights (DRL) Lada Vesta, the use of which in Russia is required, not better performance, and you can make their tuning, replacing regular lamps with yellow light on the LED with white. The result of such low-cost optimization will delight any car owner.
Consider the nuances of the installation of fog headlights and tuning DRL Read more.
Selection of execution
First of all, you should decide how fog lights will be installed on Lada Vesta - official dealer or independently.
Installation of PTF dealer - the condition of preserving the right to warranty service is performed in the amount of work provided for in the release of the top versions of Lada Vesta, and, accordingly, comprising the entire list-approved list of components. Even without taking into account the cost of performance, the amount is impressive.
Horification B. this case due to the complexity of the installation of PTF Lada Vesta, since the electronic support scheme of this car is significantly different from the electronics of previous Lada line models (Granta, Priora, Kalina) - control of fog lights on Vesta is performed from a stealing lever switch with a rotation of the tip bush, which functions independently Lever positions.
The reason for the high cost of the installation operation of the PTF dealer is and an additional electronics unit installed only on the luxury versions of Lada Vesta. This unit is an intermediate link on the signal path from the switch to the pharmaces that displays dashboard Information about their inclusion. And the installation of this device entails and expensive changes in the electrical wiring.
If the limit of warranty service of the car is an expired, then the equipment of the sedan with fog lights is possible by a much simpler diagram, including the fastener, the possibility of simplified turning on-off PTF with a button on the front panel.
Choosing fog lights
Statery PTF Luxeva lada configuration Vesta is equipped with 19 watt H16 lamps that cannot be called the optimal option. The fog lights listed in the table below have higher characteristics and well, especially Valeo, have proven themselves when installed instead of regular.
In addition to headlights, you need to purchase the following materials:
- 4-pin relay - 1;
- button on-shutting down the headlight - 1;
- protective corrugated case (tubing) for wire - 5 m;
- wire - 5 m;
- fuse at 16 A - 1.
Disassembly of the front bumper
Given the massiveness and aesthetic component of this element in the exterior, dismantling front bumper It should be done carefully and strictly according to the instructions.
First of all, you need to disconnect and remove the battery from under the hood. Then the head "on 10" is unscrewed 2 bolts of the block mounting air filterHolding also the top of the bumper.
Remove registration numbersunder which there are 2 bumper fastening screws to the central beam. The M-shaped TORX key "On 20" is unscrewed by these 2 screws and 2 of the same screws that bumper is attached to the wings, in wheeled arches.
Then, the M-shaped Torx "On 30" are unscrewed by 4 screw fastening screws of the bottom of the bumper, and TORX-20 - another 2 mounting screws to the shields on the sides on each side.
After this, the bumper is alternately on each side from the wheel of the wheel arches towards forward to the exit of his latches from landing nest.
The bumper remains hanging on the upper four TORX-30 bolts, of which the central (opposite the bracket of the capped lock) is unscrewed, while holding the bumper from falling, after which the accessory is completely disconnected from the car.
This situation is advisable to use for the passing cleaning of the radiator from insects and garbage.
Preparation of landing places for the installation of PTF
Setting the bumper on the soft canvas by the face, get access to the mounts of the niche plugs in which fog lights are installed.
The front bumper Lada Vesta Optima configuration is equipped with plugs that are not designed for fixing PTF, and has no additional fastener on the back side.
In this case, you must purchase brackets for the installation of fog lights (in the kit 2 pcs. - right and left).
If the fastener is present, then it is to get to the plugs, it is necessary to remove it.
After dismantling the brackets of the PTF mounting, the plugs held in the grooves and screws-screws are removed in the grooves.
In the removed plastic plugs, the drill with a corted drill is cut by the holes with a diameter corresponding to the existing contour or the selected pharmaces, after which the edge of the cut is treated with shallow emery paper and install parts to regular places.
Connecting fog lights
The PTF switching button is conveniently located on the central part of the console or to the left of the steering column in the existing recess. The hole under the button, depending on its configuration, is dried or cut with the subsequent neat, without damaging the edge processing.
The wiring from both headlights should be headed into the salon in the area of \u200b\u200bthe pedal node, for this, the wire of the right headlight is conveniently carried out along the transverse box between the spars.
To connect the headlamp it is advisable to use classic schemeused in previous models Lada line (Priora, Kalina, Granta), simplified - food take from a plus terminal clamp bolt rechargeable battery.
This method will minimize interference in the car's electric hemp and the cost of buying components.
Tuning daytime running lights
On Lada Vesta, two-dimensional lamps are applied by the manufacturer in the overall and daytime running lights. If instead of them to establish the LEDs modified by a certain way, then the ineffective day of the yellow color of these lights will change to a brighter white with blue.
Before performing this operation, it is necessary to get acquainted with the pinout cartridges of the daytime lights Lada Vesta, as it is nexcassical on this sedan:
- on the one hand, the cartridge must be "-" in the form of two contacts or one common;
- on the opposite side - "+" for overall lights And "+" for daytime running.
When buying LEDs, you need to make sure that the polarity of the base of the lamp and the ward cartridge. If such LEDs could not be found, output from the position, not always harmless, it can be the bending of the contact pins of the elements according to the specified scheme.
This procedure may entail not only the failure of the fuse, but also damage the elements of the electronics of the car, which are fraught with a complete loss of the right to warranty service.
The desire to make your car is better acquainted and understandable to any motorist. However, deciding to the production of tuning on their own or even with the help of professionals, but before the expiration of the warranty service, it is necessary to carefully weighed the feasibility of performing these works and the consequences, often inevitable with unqualified intervention.
Special optics from fog - this is not a luxury, but the necessary item modern carhelps to avoid road transport trouble in limited visibility conditions. We are not only about the fog, the definition hits the definition, snowfall, a blizzard, shower.
PTF on Lada Vesta is not in all confinement.
On modern domestic cars that optional equipment, is established exclusively in the luxury configuration or as additional option. If there was no visa on our vest when buying fog, it will be needed to do install yourself.
It is important to remember one immutable truth - even installing such trifles as a pair of headlights leads automatically to loss of warranty.
The output can be only one, try to perform, the so-called re-equipment to the complete set of an order of magnitude higher than the existing one. It will take a regular kit from AvtoVAZ, which includes:
PTF installation cost
Installation PTF at the dealer is very expensive.
It would be good at the beginning to think about what such a procedure would cost, because on Vest, this kind is quite complex and time-consuming occupation.
The cost of pleasure at the time of writing the material is approximately 50,000 rubles. If there is from where to add 15-20 thousand, you can safely go to the dealer and install on the spot. In which case, you can always fix any breakdown for warranty. Wish to save up the top? We do everything with your own hands.
Preparation for installation equipment
The main difficulty is that the scheme electrical system This car is seriously different from previous versions.
Under the button on the fog lamps have to cut a hole.
Lighting control will be performed using a switch installed under a steering wheel, but not having suitable positions for fixing the light flux. The electrical signal comes from the lever through an additional unit available in stock only in the luxury configuration. So the most acceptable solution is to install a kit with a separate connection and output of a special button.
List of tools that will be needed:
- pliers;
- screwdriver with crusades;
- self-tapping screw;
- crown by 76 mm for drilling holes;
- stationery knife;
- set of keys for removing the bumper and mounting optics.
Start setting a lighting kit
So we will perform work, simple and reliable way, while using a separate electrical circuit.
We remove the bumper in front, in the location of the plugs, cut out the neat opening with a diameter of 76 millimeters.
Need cutter by 76 mm
A sharp knife with a blade is rarely either a metal crown of the appropriate size. The headlights insert into the holes, fixing on the right and left brackets with the help of self-tapping screws with a length of 15-20 millimeters.
In the car, we will install the switching button, you can use standard VAZ from LADA 2114 by attaching it next to the wheel vertical optics adjustment. It can be concluded to a regular switch from Vesta, which will be without a fixation, which is slightly lower than the audio system.
Installation of wiring PTF lamps.
Wiring from headlights We carry on the metal corrugated box to the hole located in the area of \u200b\u200bthe pedals. From there we make an output to the button.
Wiring Connection Scheme
Gently cut out the place under the power button.
We use the same principle as when installing equipment equipment and grants.
The power supply for the 12V relay must be taken from the battery using the M6 \u200b\u200bbolt, directly through the fuse.
Plus, it will be possible to take where the gabar fuse is in mounting block, from the cigarette lighter.
Mount the relay where the most convenientness: in the engine compartment or inside the cabin. So we were separated by a "easy fright" - intervened in the electrical part minimally, retaining weta warranty.
Installation Scheme on Suite
Luxury scheme
conclusions
Select the lamp is needed correctly.
This article covered the easiest, but expensive method of installing fog equipment.
In practice, especially if your Lada Vesta is no longer warranty, everything can be done with far less Using plastic corrugation, simpler wiring, 16 amp fuse, relay for 4 contacts. In general, the sequence of installation will not differ.
Choosing the most suitable method, you can equip your car with light sufficient for a comfortable ride. dark time of the year when visibility is strongly limited.
