Home Generator RS 200 Excavator Specifications. Excavator KOMATSU PC200 Specifications. Crawler Excavator Komatsu PC200 Specifications and Description

Generator

RS 200 Excavator Specifications. Excavator KOMATSU PC200 Specifications. Crawler Excavator Komatsu PC200 Specifications and Description

Description

High performance and low fuel consumption

1. Engine. The Komatsu PC200-7 excavator has exceptional capacity and efficiency due to the Komatsu SAA6D102E-2 engine installed on it. This engine develops 107 kW power (143 l.), Providing increased hydraulic power. The PC200-7 model will have more low flow Fuel.

2. Hydraulic system. The hydraulic system, equipped with two pumps, provides a smooth movement of the working equipment. Hydraumind control system controls two pumps, thereby ensuring efficient use of engine power. This system also reduces the hydraulic losses during the operation of the Komatsu PC200-7 excavator.

3. Height of digging. Maximum height The digging of the Komatsu PC200-7 excavator is 9.5 m, it facilitates the performance of work that requires a significant departure of the boom, such as the destruction of structures and the finishing decoration of the slopes.

4. Load capacity. At the PC200-7 excavators improved transverse stabilityWhat contributed to the increase in load capacity. Example: cross-loading [when the arrows are removed 6.1 m (20 feet) and an altitude of 4.6 m (15 feet)] increased from 3.55 tons (3.9 short tons) to 3.9 tons (4.3 short tons).

Three Komatsu PC200-7 excavator working modes

The Komatsu PC200-7 excavator has three operating modes - a, E, B. Each of the three modes is designed to bring the speed of rotation of the engine and the pump, as well as pressure in the hydraulic system in accordance with the nature of the work performed. This ensures flexibility in operation of the machine, which consists in coordinating the characteristics of the equipment with a specific type of work.

1. Active mode (a). Maximum performance and power, short cycle elements.
2. Economical mode (e). Excellent fuel efficiency.
3. Hydromed mode (B). The optimal value of the engine speed and hydraulic pump feed.

Economical mode favorable for ambient. Fuel consumption is reduced by 20% (compared to the active mode of the Komatsu PC200-7 excavator), and the performance is equivalent to the performance of the Komatsu PC200-6 excavator when working in heavy mode.

The Komatsu PC200-7 excavator has a function of maximum cutting force, it temporarily increases cutting force by 7% when working with solid rocks.

KOMATSU PC200-7 Sketch Diagnostics Monitor

The Komatsu PC200-7 excavator is equipped with the most modern diagnostic system in the industry. The system identifies maintenance operations, reduces the diality of diagnostics, displays the timing of oil change and filters and highlights error codes.

1. The system of continuous monitoring of the state of the machine systems. When installing the key switch key to the ON position on the liquid crystal panel, a message appears about the prevention and safety warning. When the freelance states are detected, the alarm lamp lights up and a sound warning signal is turned on. Continuous checks of the status of the excavator systems prevent the occurrence of serious faults, this will allow the operator to focus on work.

2. Displays emergency states of the electronic system.Exercised using diagnostic codes. When a malfunction appears during the operation of the KOMATSUU PC200-7 excavator, the diagnostic code is displayed. In this case, the alarm lamp begins to flash, and the beep is turned on, warning about the appearance of a malfunction, it helps to avoid the occurrence of serious failures in the operation of the machine.

3. Alert function of the need to replace oil. In the case of skipping the life of the oil or filter, the corresponding maintenance control indicator lights up.

Spacious and comfortable excavator cabin Komatsu PC200-7

1. Sealed cabin with air conditioninginstalled on additional order. When installing an additional acquired air conditioner and due to availability air filter and high internal air pressure dust outside does not fall inside the cab.

2. Low noise design. The noise level is significantly reduced when the hydraulic system is rotated and unloading.

3. Low vibration. The Komatsu PC200-7 model uses a new advanced cabin system, which uses a long run and an additional spring. This helps to reduce the level of vibration at the operator seat.

4. Cabin comfortable. The internal volume of the new Komatsu PC200-7 excavator cab provides exceptionally comfortable conditions for operator operation. The spacious cabin allows you to cast a seat with a head restraint to the floor.

Reducing the cost of maintenance of the Komatsu PC200-7 excavator

Developed high-strength sleeves from a sintered steel alloy are used on the bucket and the upper axis of the handle, in the end surfaces of the liners, tungsten carbide is introduced. The intervals between the lubrication of all the sleeves of the work equipment increase from 100 to 500 hours, which reduces the costs of maintenance.

The manufacture of high-strength sleeves from the sintered steel alloy is based on metallurgy powder ferroalloys (carbon mongering). These bushings contain special lubrication in the pores in which solid particles are introduced to increase wear resistance and scratch protection.

Tungsten carbide is injected into the end surfaces of the upper arm of the handle, forming a durable film, which reduces the wear of contact surfaces and reduces the vibration of the bucket.

Equipment installed by order for the excavator Komatsu PC200-7

1. Air conditioner with wind heating system
2. AC generator, 60 A, 24 V
3. Handle assembly
- 2925 mm long (9 feet and 7 inches)
- 2410 mm long (7 feet and 11 inches)
- 1840 mm long (6 feet 0 inches)
4. Rechargeable batteries Increased tank
5. Removable top shield [Operator protection fence, level 2 (FOG)]
6. Strela 5700 mm long (18 feet and 8 inches)
7. Cabin auxiliary equipment
- protection visor from rain
- Sun visor
8. Front Protective Cabin Fencing
- for all height
- half of the height
9. Heater with glass heating system
10. High-strength sleeves from a sintered finished alloy for work equipment
11. Multifunctional color monitor
12. Rearview Mirror (left)
13. Inertial type safety belt
14. Seat on elastic suspension
15. Service valve
16. Crawler Shoes with Ground Campaigns
17. Lower protection of the tracked trolley frame
18. Protective fencing of support rollers (for the entire length of the caterpillar ribbon)
19. Displacement warning beep device
20. Workers headlights
- 2 on the cabin
- 2 on counterweight

The Komatsu PC200 excavator is a heavy tracked technique designed to carry out earthmock. Danae machine is produced chinese manufacturer special machines Komatsu.

In this model of the excavator, the manufacturer has implemented a large number modern technologies and innovative ideas, which allowed the car to become a sales leader in the international market.

In order to reduce toxic emissions and consumption diesel fuel The machine uses several special mechanisms.

To increase the power of digging, efforts and interservice intervals, special automatic mechanisms were also installed, allowing you to adjust these parameters automatically, depending on the type of work done. In addition, in the design of Komatsu 200, materials are optimal for processing, which ensured not a complex disposal of parts.

In the name of the machine, the operational mass is indicated, namely the figures 200 make it clear that the excavator has a weight of 20,000 kilograms.

In the back of the turning platform there is a six-cylinder diesel force aggregateDeveloping maximum power in 145 horse power or 106.6 kilowatt. This engine has a turbocharging system and an intercooler.

In order to eliminate frequent problems or damage to expensive nozzles due to poor fuel, a filter-moisture separator was installed in the fuel system.

Purpose

Excavator Komatsu PC200 is intended solely for the construction of any objects, including road sections.

This excavator is used in almost all for construction purposes, namely, it is able to make not only earthmoving work, which includes digging trenches and pitchers, but also to carry out dismantling.

This is explained by the presence of special attachments (or hydraulic jackhammer, or hydraulic scissors), which can cope with concrete, reinforcement and other similar materials.

Also, this technique, thanks to a rather extensive set of buckets, can perform the work of the planning type, which is a rather frequent process in construction and industry.

Drilling work can also be made of this excavator, as it, in addition to buckets and dismantling tools, can also use special hydraulic drilling equipment, which allows not to resort to the use of other equipment, if, of course, such equipment is available and installed on the machine.

Hinged equipment

As described above, the Komatsu 200 excavator is an indispensable machine in the construction work, as it has versatility. And no reason, because this car Can use a variety of attachments intended for a particular process. In the list of these auxiliary aggregates The following type variety is included:

Earth-racing bucket. It is the standard unit of this excavator and is intended for the digging of buttyans and trenches. Also can be used for loading or moving short distances different materials bulk in their structure. It has several teeth, as a rule, no more than six. There are several versions that differ in size and number of teeth. Installed to the handle without a special adapter.
Planning bucket. This equipment has a small volume and does not have teeth. The main purpose of this bucket is the work of the planning type. There are also several versions, which differ in volume and size. Installed to the handle without a special adapter.
Hydraulic jackhammer. It is one of the main tools intended for making dismantling work. It is able to cope with both concrete and concrete structures.
Hydraulic scissors. Just as the previous equipment, is one of the main units applied when dismantling any objects. In addition to the destruction of concrete and reinforced concrete structures, it can also be used when disassembled railwaysSince the effort of this equipment allows you to snack rails. For more accurate work, the scissors are equipped with a rotator, allowing you to choose the desired angle. Installed to the handle using a special adapter.
Drilling equipment. This type of equipment is applied not as often as previous aggregates, but still can be found. This unit is intended for drilling different under the structure of the soil. Installed to the handle using a special adapter.
Ripper equipment. It is an indispensable equipment when working on a rather dense soil. There is only one version of this unit, namely this alone type. Installed to the handle without a special adapter.

Of course, the Komatsu 200 excavator has a wide range of diverse attachments, but some units did not fall into this list, since all of the above is frequently used equipment.

Modifications

The KOMATSU PC200 excavator does not have modified versions, there are only a few generations of this model. But there is one version that can still be called a kind of modification, namely this Komatsu PC200 / 7LC. This model differs from the basic excavator with technical characteristics, including overall values.

In length, the car has become much larger, it is explained by the elongated tracks, which the abbreviation LC speaks about the model name. On the rotary platform in the back of the 143rd strong diesel power unit, equipped as well as in basic excavator, turbocharging system.

But it is worth noting that this unit is a little weaker than the basic, but this does not affect the work.

Of the available functions, it is necessary to pay attention to the new fuel economy system, which allows you to save up to 20 percent of diesel fuel.

The whole essence of this option is as follows: if after work the levers responsible for the movement of the machine and the operation of mounted equipment, were translated into a neutral position, the number of rotations of the crankshaft will automatically be reduced to medium revolutions.

But if the levers are in idle for four seconds, the system will automatically translate the engine to idle mode, well, after changing the position of the levers, the engine will be translated again to normal operating mode.

Specifications

In fully prepared for operation, the Komatsu 200 excavator has a mass of 19200 kilograms, but this is taking into account the 500 millimeter caterpillars. The machine can be equipped with greater widths in order to increase passability. In total, there are three meanings, it is 600 millimeters (the mass grows up to 19300 kilograms, and the pressure rendered to the ground is reduced to 44.

1 kilopascal), 700 millimeters (with the weight of the excavator equals 19550 kilograms, and the pressure on the soil 38.2 kilopascals). Well, 800 millimeter shoes with which the excavator has a mass in 19810 kilograms and specific pressure at 34.3 kilopascal. On the standard 500 millimeter shoes, Komatsu 200 excavator has a specific pressure on the soil in 53.0 kilopascal.

The excavator has a length of 9480 millimeters, when the length of the support surface is 6270 millimeters. The height of the machine to the upper point of the boom is 2985 millimeters, when the cabin altitude is exactly 3000 millimeters. The width of the excavator is of 2,800 millimeters.

Road clearance, calculated under the counterweight, is 1085 millimeters. Minimum ground clearance It is 440 millimeters. The rotation radius of the rear platform has a value of 2750 millimeters.

The support length of the caterpillar ribbon is 3270 millimeters, when the overall length is 4080 millimeters. The distance between the tracked ribbons is 2,200 millimeters. Width caterpillar stroke It is 2800 millimeters. The height of the primer is 26 millimeters.

The height of the cabin itself has a value of 2095 millimeters, and its width is 2710 millimeters. The machine platform can make a turn with a speed of 12 revolutions per minute.

Standard landing bucket has a volume of 800 cubic millimeters. The maximum allowable discharge height is approximately 7110 millimeters. The maximum depth is 6620 millimeters. The maximum radius is 9875 millimeters, when the minimum equals 3040 millimeters.

The equipment of the excavator has a loading capacity of up to 6750 kilograms. 143 liters of fluids are fitted in the hydraulic system. A hydraulic system pump is installed, the performance of which reaches 428 liters of fluid per minute. The fuel tank is able to accommodate up to 400 liters of fuel.

The cooling system tank has a volume of 20 liters.

Features

The Komatsu PC200 excavator is a highly reliable and productive machine that has a large number of modern technologies, as well as innovative ideas.

The main feature of this excavator is a special system with which you can achieve diesel saving up to 20 percent, by automatic switching Engine operation in idling mode.

This happens if the control levers, both the machine itself and the equipment, are in a neutral position for more than four seconds. There is also a system of automatic power adjustment, speed and effort with digging, which also affects fuel savings during operation.

For convenience, when servicing in the engine compartment, several special handrails and an anti-slip covering were installed on the top platform, which ensured a safe movement.

There is also easy access to the power unit and to all the necessary filters, thanks to the hatches located on the sides of the excavator platform.

It is worth noting that due to this you can get to the rest important mechanisms and systems.

In the cockpit used noise insulating porous materials, which makes it possible to significantly reduce the level of noise during operation. This, in turn, provides comfortable conditions for long work. Pretty large glazing area provided a large circular overview from the workplace.

It is also worth paying attention to the fact that in the cabin of this excavator there is a system of locking levers and other controls, which allows you to prevent accidental press, when entering the cab.

Before you begin to work, check whether the lever of this system is in a horizontal position, if not, then translate it.

Engine

The Komatsu 200 excavator is established by a diesel six-cylinder row engine SAA6D102E-2 brand designed by the Chinese manufacturer. This power unit is equipped with a turbocharging system, which allows to achieve greater productivity due to the exhaust gas gases. The maximum achievable power marked on the flywheel is 106.

6 kilowatt or 145 horsepower. The diameter of each cylinder is 107 millimeters. Piston stroke has a value of 124 millimeters. The total volume of all cylinders is in 6690 cubic millimeters. The maximum permissible frequency of crankshaft rotations is 1950 revolutions per minute.

There is an intercooler, cooling air before it gets into the engine

Price new and used

This car is quite expensive technician and currently has a cost of five million to six million Russian rubles. The price of a new excavator varies depending on the year of release and installed work equipment.

The cost of a used excavator is slightly smaller, as it depends mainly from its work. For example, if the machine worked about a thousand hours, then it is available for sale at a price of four million and up to five million Russian rubles.

And if more than five thousand hours were completed, the price will vary from three million and up to four million Russian rubles.

Of course, not only the development affects the cost, as well as the year of production, available hinged units and technical condition of the machine.

Source: http://gruzato.ru/ekskavator-komatsu-pc-200.html

Crawler Excavator Komatsu PC200 Specifications and Description

Komatsu Crawler Excavator PC200-7 is a representative of the construction site of construction special equipment produced by the famous japanese brand. All family is also referred to as Galeo and has improved environmental friendliness, safety, and performance.

As a rule, in the machine indices indicate some performance features, the same thing is done here. The excavator has an oven weighing 20,000 kilograms, which is just indicated (PC200).

In addition, the generation to which this technique belongs to this case This is the seventh.

Description and features

In order to reduce the amount of toxic emissions, the manufacturer applied a special mechanism, which in addition to its main task also contributes to a decrease in fuel consumption. All parts included in the design of the Komatsu 200 excavator are made of materials suitable for processing, as a result of which the elements unsuitable for use can be disposed of.

In this model, the developers were implemented quite a large number of modern solutions and innovative ideas, which also made it possible to take the technique of leading positions in the global market. In Komatsu 200, the mechanism of automatic adjustment of efforts during the digging was used, the power of the hydraulic system during digging was increased and the parts replacement intervals were increased.

Moreover, the excavator received three different modes of operation that allow you to choose the optimal rotation speed of the engine crankshaft and set the required pressure in the hydraulic system. Thanks to this, the car can be configured to do certain types of tasks.

Consider in more detail each mode:

Mode A. This mode is active, that is, it is achieved with maximum power indicators and performance. It has a positive effect on the speed of execution. full cycleBut it is worth noting that the specific fuel consumption increases slightly.
E. Mode is an economical operation of the excavator. If you compare it with the previous mode, then in this specific fuel consumption is reduced by 20 percent and moreover, the amount of toxic emissions is significantly less. With all this, the machine has its standard performance.
V. Mode This mode is mainly designed to work with hydraulic jackhamme, as it allows you to choose the optimal pressure of the hydraulic system and the speed of rotation of the crankshaft of the power plant.

It is worth noting that the maximum cutting effort function is also present, due to which the effort on the bucket with digging increases by 7 percent. This is especially useful when working with solid soil or with scaling rocks.

The manufacturer also focused on the comfort of the machine when working. There are special handrails with anti-slip overlays, which serve to safely move on the rotary platform near motor compartment.

The service personnel will not have any problems in servicing this model, as there is full access to all the most important nodes and mechanisms, as well as to various filters. All access is ensured by the hatches located on the sides of the swivel platform and on its platform.

Each door has a sound insulating porous coating, as a result of which the noise level of the technique was noticeably reduced.

The most thoughtful element of the entire design is the operator's cab. Her distinctive features There are verified ergonomics of management bodies and a fairly large circular review. In order to improve security, the manufacturer applied the so-called "mini-grocery" at the inlet to the cabin, which prevents accidental movement of control levers.

On the side of the operator's seat, several modern small-sized displays are installed, on which all information about technical condition cars. Operator seat is located on pneumatic suspension And has armrests and complete adjustment.

It is worth noting that the movement of the seating can be carried out both with control levers and without them, which is quite convenient. In the cockpit, the level of extraneous noise and vibrations arising during the workflow is rather low.

This was achieved through the use of an undercorns platform and a multi-layer spring hydraulic system.

The cabin has a hatch with a window, which, if necessary, can be opened and fixed in the open position. The same applies to the door for the door. The cab design itself was very sealed, which allows the operator to do any work with maximum comfort in very dusty conditions.

By order of the client, the excavator is equipped with an additionally radio tape recorder and air conditioning. Operation of this model can occur not only during the day, but also in dark time day or in conditions with poor visibility. This is explained by the fact that bright headlights are installed on the cabin, arrows and the turning platform.

For additional convenience, the rearview mirrors are installed, however, they are used only in the bright time of the day.

Hydraulic system control is carried out electronic system Hydraumind. It was applied to reduce fuel consumption during operation. There are valves tracking the degree of load, which serve to increase or on the contrary, reducing the performance of the motor and hydraulic system. This feature is one of key advantages Excavator Komatsu 200.

The manufacturer has increased the reliability of the working bodies of the machine by applying the continuous welding method, which also has positively affected and reliability.

Improved hydraulic system Allows you to make any actions with maximum accuracy, which is undoubtedly a big plus.

This advantage of the excavator showed another presentation when it was necessary to gently cut the watermelon, with which the technique coped perfectly.

Among its class, Komatsu PC200-7 is allocated with a modern diagnostic system, thanks to which complete control of the replacement of filter elements, oil and much more. As a result, the time required for the diagnosis of the entire excavator is significantly reduced.

Even in basic configuration This model is quite multifunction, however, to expand the scope and additional convenience, the following is optional to the technique:

Different handle length.
Window heating system.
Air conditioning.
Additional cabin fixtures designed to protect against sunlight and rain.
Large rechargeable battery.
Alternator.
Powerful heating system, which in addition to the cab heats and glass.
Extracted up to 5700 millimeters arrow.
Elastic suspension operator seat.
Modern color display.
Safety belt.
Sound signal.
Special counterweight.

In the global market, this excavator has a rather great demand. This is due to the fact that the technique perfectly combines the high reliability of the whole design, modern appearance, excellent efficiency and very good powerful indicators.

Under the hood of technology, a diesel six-cylinder engine SAA6D102E-2 was installed. This power unit was developed by Komatsu and has turbochargeds with cooled air cooled.

The engine corresponds to the Environmental Tier II standards, which is just valid in the territories of Japan, America and Europe. Fuel system It has a special moisture separator, which removes all the water from fuel.

This element is found in many modern machines, as it also affects good job Power installation.

In addition to turbocharging, this engine has a direct fuel injection system in combustion chambers and liquid cooling. Also present here modern system Management, which positively affects fuel consumption.

Purpose

Crawler Excavator Komatsu 200 is an indispensable machine in construction organizations, various industrial industries, mining and fields.

The technique is designed to perform such works as digging tranches and butt; Career development; excavation; breaking the solid mass of soil and rocks; creating soil and other embankments; Loading and unloading of any materials; Running the working territories; cleaning the working platform from production garbage; Seal of loose soil; the destruction of any concrete or reinforced concrete objects; Drilling of wells of various diameters and depths; Cleaning the bottom of rivers and reservoirs.

In addition to all of the above, this machine is capable of performing a lot of other tasks.

Modifications

Komatsu PC200 has several modified versions, however, the most popular of all is the Komatsu PC200 / 7LC model. In this version, the manufacturer has increased the caterpillar platform, which is indicated in the excavator index. Another engine was also installed, the rated power of which is 105 kilowatts or 143 horsepower.

The key feature of the modification is reduced by 20 percent fuel consumption. For this, a special system is responsible, which, when transtinguition of controls, the neutral position reduces the rotation speed of the engine of the engine to its idle speed. The same can occur during the workflow, if the levers are in idle of more than 4 seconds.

There are no significant differences from basic equipment.

Bucket characteristics:

Capacity of the bucket installed is 0.8 cubic meters.
The number of teeth on the bottom cutting edge is 5.

Engine characteristics

The type of engine installed is inline, diesel.
Engine brand - SAA6D102E-2.
Engine manufacturer - Komatsu.
The number of cylinders is 6.
The total working volume is 5330 cubes.
Rated output capacity - 107 kilowatts / 145 horsepower (at 1950 rpm).
The nominal frequency of rotation of the crankshaft is 1950 revolutions per minute.
The type of cooling system is liquid.
Injection type type - direct fuel injection.
Startup type type - electric starter.
Type of turbocharging - gas turbine with cooled air air.
The diameter of the cylinders is 107 millimeters.
The minimum stable speed of rotation on idling - At least 700 revolutions per minute.
The minimum stable speed of rotation at idle is no more than 2000 revolutions per minute.
The smallest fuel consumption in one working hour - 13 liters.
The greatest fuel consumption in one working hour - 15 liters.

dimensions

Design length of excavator - 9425 millimeters.
The width of the tracked platform is 2800 millimeters.
Complete height in the cab - 3000 millimeters.
The smallest road clearance of the tracked platform is 440 millimeters.
Crawler rut width - 2,200 millimeters.

Price

The cost of the new excavator Komatsu PC200-7 is currently from 5 million rubles and up to 6 million Russian rubles. The main factor affecting the final cost is the production of the machine.

Currently, used cars are also available, the cost of which starts from 3.3 million rubles and comes to 4.5 million Russian rubles. The price varies depending on the year of production, the version (basic or modified), installed equipment, the number of worked motochas and the general technical condition.

Source: http://exkavator-info.ru/ekskavator-komatsu-pc300/

Excavator Komatsu PC200 7-8

Komatsu PC200 is a recognized reliability standard. The figures specified in the Index of the Type of Technology, talk about the order number (generation) and the operational mass of the model. Thus, the Komatsu RS 200-7 version weighs 20,000 kg and refers to the seventh generation.

This tracked excavator represents a line of construction models of the Komatsu brand. This family, referred to as GALEO, is characterized by improved environmental performance, performance and safety.

In the direction of increasing environmental parameters, mechanisms reduced the level of emissions, fuel consumption. In addition, the manufacturer thought about the disposal of parts included in the design of Komatsu PC200, using optimal materials for processing.

Special marking makes it easy to identify elements.

In Komatsu RS 200, the developers implemented many innovative ideas that made the technique with one of the leaders in the international market. Thus, in the excavator, the mechanism of automatic control of the digging force was applied, the power of digging and intersavice intervals were increased.

Capabilities

In addition, there were three modes of operation of the excavator: "A", "E" and "B". They are necessary to bring the frequency of rotation of the pump and motor, pressure in the hydraulic system in accordance with the type of work performed. As a result, flexibility is achieved in the operation of the equipment and the coordination of the characteristics of the machine with a certain type of work.

Modes of work "Komatsu RS 200":

"A" - active mode. Maximum power and performance, elements of a cycle of a small duration;
"E" - economical regime. Improved fuel efficiency. This mode has a smaller negative effect on the environment. Fuel consumption is reduced by 20% compared with the active mode.
The performance is preserved at the standard level;
"B" - the mode of hydrolyol. Optimal choice The feed indicators of the hydraulic pump and the engine rotation frequency.

In addition, Komatsu PC200 has a function of maximum cutting effort, which allows you to temporarily increase cutting force by 7%.

This is especially useful when working with solid rocks.

The Komatsu PC200 brand product line is one of the most popular. The model is distinguished by increased productivity, maneuverability, efficiency and improved functionality. Advanced computer equipment makes the management of the technique extremely simple.

Overall dimensions Komatsu PC200:

length - 9425 mm;
width - 2800 mm;
height - 3000 mm;
road clearance - 440 mm;
cracked tape pitch - 2200 mm.

The model has a lot of 19300 kg. The rotation speed of the platform is 12 rpm.

Performance "Komatsu RS 200":

bucket capacity - 0.8 cubic meters;
maximum height of digging - 10,000 mm;
the limiting height of the bucket unloading is 7110 mm;
maximum digging radius - 9875 mm;
the limit effort of digging on the bucket - 15200 kgf;
pressure effort on handles - 11000 kgf;
frontal load capacity - 6750 kg;
the limit depth of digging is 6600 mm.

Komatsu PC200 fuel consumption

Capacity fuel tank Komatsu PC200 is 400 liters. The excavator consumes an average of 13-15 l / h.

Engine

At Komatsu PC200, a 6-cylinder row turbocharged diesel unit with an intercooler is used as a power plant.

This motor meets the requirements of Tier II approved by the Environmental Protection Agency. Norms operate in Japan, European Union and America.

In the fuel supply system, there is a filter-moisture separator, providing additional protection for an expensive injection system.

The SAA6D102E-2 engine is its own development of Komatsu. In addition to turbochargedwood, it has a direct fuel injection and liquid cooling system. Advanced management system power installation Making the work technique more economical, significantly reducing fuel consumption.

The manufacturer for "Komatsu RS 200" also increased the intervals of the time to replace items oil filter, oil and replacement of the hydraulic filter.

The parameters of the KOMATSU SAA6D102E-2 aggregate:

working volume - 5.33 l;
rated power - 107 (145) kW (hp);
rotation frequency - 1950 rpm.

Device

Komatsu PC200 is designed for convenient operation. In the area of \u200b\u200bthe engine compartment, special handrails are located on the top platform, which, together with anti-slip coverage, provide a safe movement.

Maintenance and repair Thanks to easy access to filters and the engine are carried out without any problems. The hatches on the side and on top of the turning platform allow you to get to any system of technology.

The inner surface of the door has a noise insulating porous coating, minimizing sound pressure during the operation of the excavator.

Cabin "Komatsu RS200" is one of the most thoughtful elements. It is characterized by an derived ergonomics and a large circular review. The technique is equipped with a block of random movements - a special "mini-hoggbum" at the entrance to the cab. Before you start, it will have to be installed in a horizontal position.

Information is displayed on small and modern displays on the side of the operator. The operator chair is equipped with armrests, pneumatic suspension and multiple settings that regulate its movement.

The seat in Komatsu PC200 can be moved separately from the control joysticks or together with them.

The undercorns and multi-layer spring hydraulic system provide a small level of vibrations in the cabin.

During operation, the operator can open the sliding window located on the roof hatch and on the door. This element has an open position. Strong dusting is not a hindrance for Komatsu RS200.

Good cockpit seal does not allow dust there. Optionally, the excavator is installed with radio and air conditioning with additional nozzles. The headlights installed on the arrows, platform and cabin simplify work in the dark.

Convenience of movement also provide rearview mirrors.

The main "highlight" Komatsu PC200 is a Hydraumind system controlling hydraulics by means of electronics. This component has a positive effect on fuel economy.

Load Tracking Valves allow you to increase or reduce the performance of the hydraulic system and the engine at a certain point.

Since the maximum indicators are required only by a short time, the effect of the Hydraumind system turns out to be significant.

The handle and arrow of the excavator are made using the continuous welding method, which increases the reliability of the elements. The movements of the handle during operation are distinguished by accuracy and smoothness. It is no coincidence that the representatives of Komatsu cut watermelon with this technique.

Komatsu RS200 is equipped with the most advanced diagnostic system in its class. It controls the timing of the replacement of filters, oils, maintenance operations and reduces the diality of diagnostics.

Komatsu PC200 is a fairly universal technique. Optionally, the excavator is installed:

handles of different lengths;
air conditioner with wind heating system;
auxiliary equipment for the cabin (antickery visor, a visor to protect against rain);
battery greater tank;
alternator;
removable top shield;
heater with glass heating function;
arrow of increased length (5700 mm);
protective fence of the cabin (half a height, for the entire height);
an elastic suspension chair;
high-strength sleeves made from gratened sintered alloy;
crawler shoes with primers;
protective fences for support rollers;
left rearview mirror;
advanced color monitor;
safety belt;
service valve;
a device for serving a beep;
protective mechanism for a tracked trolley frame;
work headlights on the cabin and counterweight.

In the excavator, perfect design and modern appearance are perfectly combined. Reliability and efficiency provide high demand for Komatsu RS200.

Price new and used Komatsu PC200

Komatsu PC200 is widely represented in the special machinery market. The cost of the excavator varies depending on the workshops and the year of release.

When working in 1000 hours for the technique will have to give 4-4.3 million rubles, when working in 5,000 hours - 3.3-3.5 million rubles.

At the same time, the repair of Komatsu RS200 will not be a special problem, since Russia has a multitude of Komatsu service centers.

The rental of the excavator will cost 1200-1300 rubles per hour.

Analogs

Analogues of the Komatsu PC200 model can be attributed to the Doosan S225NL excavator.

Source: http://traktorbook.com/ekskavator-komatsu-pc200-7-8/

Komatsu PC200-8 - Specifications and analogues

The Japanese engineering company Komatsu has consistently pleasing to construction equipment and excavators in particular for more than half a century.

Russian buyers can acquire products of this manufacturer since 2010.

Komatsu PC200-8, which refers to hybrid type models - one of the most successful, which is in constant demand among buyers since 2008. No less demand also uses the domestic model of ExMash E200C.

Main settings

In the model Komatsu PC200 8 specifications include the following:

The power of the standard engine: 116 kW (or 155 liters with.) - complete, 110 kW (or 148 liters.) - Useful.
Engine parameters: Working volume - 6.69 cm³, the number of cylinders is 6 pieces.
Capacitive parameters: fuel tank - 400 l, hydrobook - 135 liters.
The recommended standard of quality used in the fuel used - Euro 3.
Pump type - adjustable axial-piston.
Speed: Maximum (HI) 5.5 km / h, Average (MI) - 4.1 km / h, Minimum (LO) - 3 km / h.
The total weight of equipment is 19200 kg.
The E200C excavator has similar technical characteristics, not yielding at in power, nor in reliability, nor in performance.

Performance - above all

It is characterized by a wide working range, which can be safely attributed to the main advantages of this representative of construction equipment.

In total, three modes of operation are provided, in any of them you can configure the parameters of the engine rotation, pump and pressure in the hydraulic system, depending on the complexity of the spectrum of the work.

This model is characterized by an optimal weight distribution, which makes it possible to be even more resistant on surfaces different types. Mobility and stability are considered the advantages of the E200C excavator, which gives it popularity among the owners.

Ergonomics and service Komatsu PC200 8

The manufacturer, Komatsu, took care of not only the technical characteristics of the caterpillar excavator, but also about the convenience of the excavator.

The latter can comfortably accommodate enough spacious cabin, the ergonomic seat is equipped for it, it can reach all the controls you need for the minimum time. The cabin also has a special display, which includes information about the actual parameters of the hybrid installation and the amount of energy.

In addition, it allows you to take into account fuel consumption when performing operations of different types. The E200C cabin provides all conditions for the comfort of the operator - a wide visibility, an ergonomic chair.

Also, the Komatsu PC200 8 is characterized by simplicity and unpretentiousness in service. Through the use of high standard fuel, such a parameter as environmental friendliness increases.

And in general, this is a very reliable model that has been able to serve for many years of work, without the minimum intervention in the work of the mechanism. The main thing is what you need to remember the owner is timely service maintenance.

By the way, with a search for spare items, problems usually do not occur, since all major tracked knots produces the company itself for everything model Row. And the customer's package can choose personally depending on the task.

In general, the Komatsu PC200 8 and E200C excavator are characterized by very high performance at simultaneously cost-effective fuel consumption.

Specifications Komatsu PC200 8

Full title	Excavator Komatsu PC200 / LC-8
Total weight, kg	19400-21460
Engine model	SAA6D107E-1
engine's type	diesel
The number and location of cylinders	6
Motor Operation, CM3	6690
Engine power, kW (hp)	116(155)
Calculating speed of rotation, rpm	2000
Cylinder diameter and piston	107 × 124.
Engine Manufacturer (Mark)	Komatsu.
Maximum speed, km / h	3,0/5,5
Road clearance, mm	440
Wheel (tracked) base, mm	3275/3655
The width of the caterpillar, mm	500/600/700/800/900
Workers brakes	hydraulic blocking
Parking brakes	mechanical disk
Fuel tank, l	400
Cooling system, l	20,4
Hydrobacion, l.	135
Depth of digging, mm	5380-6620
Unloading height, mm	6630-7110
Maximum thrust force, kN	178
Front / rear wheel track, mm	2200; 2380
View of the worker	reverse shovel
Capacity bucket, cubic meters	0,5-1,17
Width of the cutting edge bucket, mm	750-1450
Radius of the rear of the platform, mm	2750
The rotation speed of the platform, rpm.	12,4
Digging height, mm	9500-10000
Maximum digging radius, mm	8850-9875
Maximum reach (in terms of soil), mm	8660-9700

High performance and low fuel consumption

3. Height of digging. The maximum height of the Komatsu PC200-7 excavator digging is 9.5 m, it facilitates the performance of work that requires a significant departure of the arrows, such as the destruction of structures and finishing decorations.

4. Load capacity. In the excavators of PC200-7, transverse stability is improved, which contributed to an increase in the carrying capacity. Example: cross-loading [when the arrows are removed 6.1 m (20 feet) and an altitude of 4.6 m (15 feet)] increased from 3.55 tons (3.9 short tons) to 3.9 tons (4.3 short tons).

Three Komatsu PC200-7 excavator working modes

Economical mode is favorable for the environment. Fuel consumption is reduced by 20% (compared to the active mode of the Komatsu PC200-7 excavator), and the performance is equivalent to the performance of the Komatsu PC200-6 excavator when working in heavy mode.

The Komatsu PC200-7 excavator has a function of maximum cutting force, it temporarily increases cutting force by 7% when working with solid rocks.

KOMATSU PC200-7 Sketch Diagnostics Monitor

2. Displays emergency states of the electronic system. Exercised using diagnostic codes. When a malfunction appears during the operation of the KOMATSUU PC200-7 excavator, the diagnostic code is displayed. In this case, the alarm lamp begins to flash, and the beep is turned on, warning about the appearance of a malfunction, it helps to avoid the occurrence of serious failures in the operation of the machine.

3. Alert function of the need to replace oil. In the case of skipping the life of the oil or filter, the corresponding maintenance control indicator lights up.

Spacious and comfortable excavator cabin Komatsu PC200-7

1. Sealed cabin with air conditioninginstalled on additional order. When installing an additionally acquired air conditioner and due to the presence of a air filter and an increased internal air pressure, dust outside does not fall inside the cab.

2. Low noise design. The noise level is significantly reduced when the hydraulic system is rotated and unloading.

3. Low vibration. The Komatsu PC200-7 model uses a new advanced cabin system, which uses a long run and an additional spring. This helps to reduce the level of vibration at the operator seat.

Reducing the cost of maintenance of the Komatsu PC200-7 excavator

Developed high-strength sleeves from a sintered steel alloy are used on the bucket and the upper axis of the handle, in the end surfaces of the liners, tungsten carbide is introduced. The intervals between lubricate all the sleeves of the work equipment increase from 100 to 500 hours, which reduces maintenance costs.

Tungsten carbide is injected into the end surfaces of the upper arm of the handle, forming a durable film, which reduces the wear of contact surfaces and reduces the vibration of the bucket.

Equipment installed by order for the excavator Komatsu PC200-7

1. Air conditioner with wind heating system
2. AC generator, 60 A, 24 V
3. Handle assembly
- 2925 mm long (9 feet and 7 inches)
- 2410 mm long (7 feet and 11 inches)
- 1840 mm long (6 feet 0 inches)
4. Rechargeable high capacity batteries
5. Removable top shield [Operator protection fence, level 2 (FOG)]
6. Strela 5700 mm long (18 feet and 8 inches)
7. Cabin auxiliary equipment
- protection visor from rain
- Sun visor
8. Front Protective Cabin Fencing
- for all height
- half of the height
9. Heater with glass heating system
10. High-strength sleeves from a sintered finished alloy for work equipment
11. Multifunctional color monitor
12. Rearview Mirror (left)
13. Inertial type safety belt
14. Seat on elastic suspension
15. Service valve
16. Crawler Shoes with Ground Campaigns
17. Lower protection of the tracked trolley frame
18. Protective fencing of support rollers (for the entire length of the caterpillar ribbon)
19. Displacement warning beep device
20. Workers headlights
- 2 on the cabin
- 2 on counterweight

The Japanese engineering company Komatsu has consistently pleasing to construction equipment and excavators in particular for more than half a century. Russian buyers can acquire products of this manufacturer since 2010. Komatsu PC200-8, which refers to hybrid type models - one of the most successful, which is in constant demand among buyers since 2008. No less demand also uses the domestic model.

Main settings

In the KOMATSU PC200 model 8, the technical specifications include the following:

The power of the standard engine: 116 kW (or 155 liters with.) - complete, 110 kW (or 148 liters.) - Useful.
Engine parameters: Working volume - 6.69 cm³, the number of cylinders is 6 pieces.
Capacitive parameters: fuel tank - 400 l, hydrobook - 135 liters.
The recommended standard of quality used in the fuel used - Euro 3.
Pump type - adjustable axial-piston.
Speed: Maximum (HI) 5.5 km / h, Average (MI) - 4.1 km / h, Minimum (LO) - 3 km / h.
The total weight of equipment is 19200 kg.
The E200C excavator has similar technical characteristics, not yielding at in power, nor in reliability, nor in performance.

Performance - above all

The Komatsu PC200 8 excavator will perfectly fit into conditions where the task is to ensure the height of digging up to 10 m inclusive. At the same time, the power of the digging compared to the previous model of the manufacturer in the same ruler increased by 29%. It is characterized by a wide working range, which can be safely attributed to the main advantages of this representative of construction equipment. In total, three modes of operation are provided, in any of them you can configure the parameters of the engine rotation, pump and pressure in the hydraulic system, depending on the complexity of the spectrum of the work.

This model is characterized by an optimal weight distribution, which makes it possible to be even more resistant on the surfaces of various types. Mobility and stability are considered the advantages of the E200C excavator, which gives it popularity among the owners.

Ergonomics and service Komatsu PC200 8

The manufacturer, Komatsu, took care of not only the technical characteristics of the caterpillar excavator, but also about the convenience of the excavator. The latter can comfortably accommodate enough spacious cabin, the ergonomic seat is equipped for it, it can reach all the controls you need for the minimum time. The cabin also has a special display, which includes information about the actual parameters of the hybrid installation and the amount of energy. In addition, it allows you to take into account fuel consumption when performing operations of various types. The E200C cabin provides all conditions for the comfort of the operator - a wide visibility, an ergonomic chair.

Also, the Komatsu PC200 8 is characterized by simplicity and unpretentiousness in service. Through the use of high standard fuel, such a parameter as environmental friendliness increases. And in general, this is a very reliable model that has been able to serve for many years of work, without the minimum intervention in the work of the mechanism. The main thing is what you need to remember the owner is timely service. By the way, with a search for spare items, problems usually do not occur, since all major tracked knots produces the company itself for the entire model range. And the customer's package can choose personally depending on the task.

In general, the Komatsu PC200 8 and E200C excavator are characterized by very high performance at simultaneously cost-effective fuel consumption.

Specifications Komatsu PC200 8

Full title	Excavator Komatsu PC200 / LC-8
Total weight, kg	19400-21460
Engine model	SAA6D107E-1
engine's type	diesel
The number and location of cylinders	6
Motor Operation, CM3	6690
Engine power, kW (hp)	116(155)
Calculating speed of rotation, rpm	2000
Cylinder diameter and piston	107 × 124.
Engine Manufacturer (Mark)	Komatsu.
Maximum speed, km / h	3,0/5,5
Road clearance, mm	440
Wheel (tracked) base, mm	3275/3655
The width of the caterpillar, mm	500/600/700/800/900
Workers brakes	hydraulic blocking
Parking brakes	mechanical disk
Fuel tank, l	400
Cooling system, l	20,4
Hydrobacion, l.	135
Depth of digging, mm	5380-6620
Unloading height, mm	6630-7110
Maximum thrust force, kN	178
Front / rear wheel track, mm	2200; 2380
View of the worker	reverse shovel
Capacity bucket, cubic meters	0,5-1,17
Width of the cutting edge bucket, mm	750-1450
Radius of the rear of the platform, mm	2750
The rotation speed of the platform, rpm.	12,4
Digging height, mm	9500-10000
Maximum digging radius, mm	8850-9875
Maximum reach (in terms of soil), mm	8660-9700

Source sells caterpillar excavators Komatsu PC200-8M0.. These models of specialized equipment sells at reasonable prices.

For the design of Komatsu excavators, both excellent specifications and excellent performance parameters are generally characteristic. The main features of the model PC200-8M0 are:

improved functionality;
increased performance;
low fuel consumption;
wide spectrum of operating temperatures;
contemporary Computerized Equipment;
reliable design;
maneuverability;
low level of toxic emissions into the atmosphere;
ease of operation and maintenance;
comfortable operator work conditions.

The exceptional quality of Komatsu specialized equipment provides a high degree of automation of production, and in addition, the use of high-quality components and modern high-tech materials. In the PC200-8M0 excavators, innovative solutions are used, including a system of automatic drip gain control, an economical engine with low level Noise, upgraded cooling system, etc.

As a distributor of the company Komatsu and being interested in long-term and mutually beneficial cooperation, the source conducts a weighted marketing policy. However, in addition to the moderate value of the PC200-8M0 excavators models, the company also offers its customers a modern level of service.

Version PC200LC-8M0

Model PC200LC-8 is a modified version of the PC200-8 excavator from Komatsu. The difference between PC200LC-8 lies in large dimensions of the length and width of the support part.

This significantly reduces the pressure on the soil with an increase in the weight of the excavator itself, which gives new possibilities under conditions of low passability, in particular on swampy terrain. It also makes it possible to re-equip this Komatsu model for logging.

PC200LC-8 has an increased operational mass of 21 100 kg in comparison with PC200-8 and significantly exceeds the efficiency and performance of many representatives of their own class of other brands.