Kia sorento wheel bolt pattern. Tires and wheels for Kia Sorento, wheel size for Kia Sorento. Not a standard bolt pattern

The KIA car has long gained great popularity among Russian motorists. It comes with only modern parts that are easy to modify. Disks installed on the machine can be of several types - steel, cast, magnesium.

The most common are usually stamped steel. They are made from sheet steel by stamping.

At the factory, the machines are equipped with just such products. This is due to their low cost.

Of course, it can be installed on the car and other models, for example, cast. But we must take into account their characteristics and mode of operation of the car. Casting has several negative qualities.

For example, on an aluminum surface, after a while, an oxide film may appear, which greatly spoils the appearance.

Kia ceed

It has several types of body and different configurations depending on the date of manufacture.

Disc designs can be conventional stamped or more expensive light alloy made from aluminum alloy.

The diameter of these products is in the 15 - 17 inches range.

For tuning on Kia Sid, you can install discs 225 / 40.R18.

Kia Optima IF

The model was launched in 2000. Until 2005, she completely copied the Hyundai Sonata. The only difference was the equipment of the machine and its design.

In any version, the car had disks with the dimensions indicated in the table:

In 2005, the Koreans introduced a completely different car. It was completely different from its Hyundai Sonata counterpart. The sizes of the disks have also changed.

Suitable for cars produced in 2005-2010:

Today, a new Kia Optima model is offered for sale on the market, equipped with wheels with the following dimensions:

Kia rio

At the factory, the car is equipped with models R15 - R16. The main role in the choice of parameters is played by the vehicle equipment. By default, the Kia Rio is equipped with products with dimensions:

You can, of course, also install discs of a different design. But any of them must correspond to the dimensions indicated in the table. Large deviations will lead to a deterioration in vehicle dynamics. The suspension will start to fail, fuel consumption will increase.

Kia sorento

This mid-size crossover was manufactured by the Korean company Kia Motors. It was shown to the public in 2002 at the Chicago Salon. In the factory configuration, the Kia Sorento is equipped with a 7.5Jx16ET40 wheel, the diameter is in the range of 17-19 inches.

Main dimensions:

• 5j x 17,
• 5j x 18,
• 5j x 19,
• 7j x 17,
• 7j x 18.

Other discs can also be installed on the car, but with dimensions close to those recommended by the manufacturer.

Kia soul

The popularity of this brand in Russia is evidenced by the number of cars sold to Russians. This number has already passed the milestone of 10,000. The Kia Soul plant is equipped with 6Jx15 stampings for 195/65 R15 tires.

The mid-range car is equipped with more expensive light-alloy 6.5Jx16. Suitable tires 205/55 R16. The luxury equipment includes alloy wheels 7Jx18 with tires 225/45 R18.

• R16 - ET 42-46 mm.
• R17 - ET 44-48 mm.
• R18 - ET 50-55 mm.

Kia sportage

When choosing wheels for Kia Sportage, as well as for other Korean cars, it is advisable to follow the manufacturer's recommendations. Of course, to increase the ground clearance, you can use discs with other sizes. However, this will greatly change the technical characteristics of the machine.

Factory drive sizes:

• 5Jx16, ЕТ 31.5, DIA 67.1,
• 5Jx17, ЕТ 35, DIA 67.1,
• 7Jx18, ЕТ 40.5, DIA 67.1.

For replacement, you can use discs with the following sizes:

• 7x165 / 114.3ET39,
• 7.5x165 / 114.3ET39,
• 7x175 / 114.3ET39,
• 7x175 / 114.3ET36,
• 7.5x175 / 114.3ET34,
• 8x185 / 114.3ET32.

Kia spectra

A budget car with 14-inch wheels with 185/65 R14 tires. The wheel arch of the Kia Spectra allows the installation of R15-R16. However, such an increase in wheels can lead to a deterioration in dynamic performance and an increase in fuel consumption.

Using automatic selection of tires and rims for the car Kia sorento, you can avoid many problems associated with their compatibility and compliance with the recommendations of the car manufacturers. After all, these components have a huge impact on a number of vehicle performance characteristics, from handling to dynamic qualities. In addition, tires and rims in a modern car are one of the active safety elements. That is why it is extremely important to approach their choice very responsibly, using for this reason enough specific knowledge about these products.

Unfortunately, most car owners prefer not to get into such technical nuances. Regardless, the automatic selection system will prove to be extremely useful, as it will minimize the likelihood of incorrect selection of wheels or tires. And it is distinguished by an extraordinary variety, due to the availability of a wide range of this type of products in the Mosavtoshin online store.

Many owners of Kia Sorento are wondering - what is the bolt pattern of disks and wheels in their car? Usually, a similar question sounds when it is necessary to find out the parameters of the factory disks, and it is also possible to tune the suspension.

Purpose of wheel bolt pattern

Wheel looseness - the distance between the hub bolts and the number of bolted connections to which the disc is attached. Parament is designed to fit rims to the hub. If the bolt pattern is not chosen correctly, then it will be impossible to put the wheel on the mounting bolts, and, accordingly, screw it on.

Vehicle.

Factory bolt pattern

Throughout the history of production, Kia Sorento was assembled in different trim levels. This directly influenced the selection of wheels, and, accordingly, the bolt pattern. Depending on the equipment and year of manufacture of the vehicle, the corresponding factory standards have been set on the Ford Fusion.

So, consider the wheel bolt pattern for Ford Fusion, taking into account the configuration and year of manufacture:

Wheel characteristics.

The standard bolt pattern is 5x139.7 with a wheel diameter of 16 inches. The width of the discs used is from 7.0j to 8.0j. Quite similar parameters can be found in the Ford Kuga and Honda CR-V.

Here are the characteristics of the wheel.

Not a standard bolt pattern

Kia Sorento's non-standard wheel bolt is used when tuning a car's suspension. To change the interbolt space, you will have to make sacrifices and change all four hubs on the vehicle. This will certainly cost a pretty penny to the owner.

Conclusion

The size and bolt pattern of the wheels on the Ford Fusion is PCD 5 × 139.7, while the wheel diameter is 16 inches. The width of the discs that are used are from 7.0j to 8.0j. To install non-standard and non-standard wheels, for example, for tuning, you will have to change all four hubs.