Home Salon Vaz 2110 air filter is set. Installation of zero resistance filter with his own hands

Salon

Vaz 2110 air filter is set. Installation of zero resistance filter with his own hands

Good day. Today, VAZ 2112 drove to us in the car service. We asked for a diagnosis of the engine. The reason was the bad and not even operation of the engine on the go. We checked the candles and replaced the fuel filter. Then they decided to replace the air filter. In this article we will tell you how to remove and replace air filter VAZ 2110, 2111, 2112 with your own hands. According to the regulations, perform this action to replace the filter every 10-15 thousand kilometers.

Vendor code:
Air Filter - A39201

Instruments:
To replace the air filter on the VAZ 2110, 2111, 2112, you will need a cross screwdriver.

Removal and replacement of air filter VAZ 2110, 2111, 2112:

Open the hood. Next, unscrew the 4 screws.

Press the sensor lock buttons.

Remove the plug.

Open the air filter cover and remove to the side.

After that, pull out the old air filter and change it to the new one.

After that, insert a new air filter.

That's all. It remains only to throw the air filter cover and fasten it. The entire procedure for replacing the air filter on the VAZ 2110, 2111, 2112 took about 10 minutes. I wish good luck on the roads!

Video removal and replacement of air filter VAZ 2110, 2111, 2112:

Not once again remind that the VAZ 2110 were both injector and with carburetor engines. And the order of replacement of the air filter, of course, will be different for each of these models. But still, in this article, it will be the option of replacing an air filter with an injection system for such machines as VAZ 2110, 2111, 2112.

Please note that the filter element must be changed at least once every 30,000 km. This is the recommendation of the plant by the manufacturer AvtoVAZ. Although in conditions of severely contaminated air, for example, with intensively exploitation of dusty dust roads, this procedure should be made twice as often.

To perform this task, we will need only one cross screwdriver. First, it is necessary to unscrew the 4 bolts of the cover of the housing cover, as shown in the photo:

After performing this step, you can raise the lid slightly up following its hand:

Next, you can remove the old air filter from your place.
After which we wipe the inside of the filter body well so that there is no dust

Now you can replace the filter, after purchasing a new one. Prices for these consumables are different, and can vary from 100 to 300 rubles. Just do not think that it is necessary to change the expensive.

The installation passes in the reverse order, and it is necessary to keep in mind that the air filter should be sent to its ribs along the movement of the car.

In order for the motor of the car to work stably with maximum performance, it needs a high-quality fuel mixture. One of the most important devices involved in its formation is an air filter - a mandatory element of any engine, whether it is gasoline or diesel. It is he who provides a carburetor or an injector by air, cleaning it from moisture and dust.

In this article we will talk about what air filter VAZ-2110, as well as consider the process of its installation.

Why do you need a filter

And gasoline, and diesel engine will be able to work perfectly and without air filtration device, but will it be enough for a long time? The smallest particles of dust, dirt and moisture in the engine hitting in the cylinder will eventually begin to destroy rubbing parts.

In addition, the fuel mixture, which will include moisture and various debris, not only will not provide sufficient power, but also the reason for the emergency failure of the carburetor, the injector, nozzles, etc.

Where is and what is an air filter element

Air filter VAZ-2110 is located in the engine compartment of the car. Depending on the type of engine, its housing may have a different look. In carburetor motors, it is made of metal and has a round shape. Air filter VAZ-2110 (injector) is placed in a rectangular plastic case.

The filter element itself also has a different form: for the carburetor - round, for the injector - rectangular. It is made of a special porous material compressed in the harmonica.

The injection of the filter in injection models is connected to the engine via corrugations. This is a kind of air liner for which the purified air enters the device where the fuel mixture is formed. Air filter corrugation VAZ-2110 is a thick corrugated rubber hose. In carburetor models, the housing of the filter element is installed directly on the carburetor.

When the filter is replaced

Naturally, the filter element ever comes into disrepair and requires replacement. For cars VAZ-2110, the manufacturer strongly recommends it to replace it after every 20 thousand km of run. If the machine is operated in conditions of increased pollution, it is better to carry out this procedure after 10 thousand km, when the engine oil is replaced and

It also happens that the air filter VAZ-2110 becomes unsuitable for further work and much earlier. In carburetor engines, for example, it can be thrown by oil, if you fail and stop cope with your task. In addition, the filter may suffer from mechanical damage, fuel or water from entering it. In these cases, it is subject to immediate replacement.

Features of choice

Pick up the air filter VAZ-2110 today does not represent any problem. For this you do not need to even take it with you to the store or market. It is enough to inform the seller a car model and type or injection), and it will offer you several products from different manufacturers.

Immediately designate that the best option will be the original filtering element of the AvtoVAZ production, but you can also purchase and set decent analogues, such as "Bosch", Mann or Filter.

Air filter VAZ-2110: dimensions

In the case, if the incompetent seller comes you, it will not be superfluous to know the size of the filters for different types of motors.

For carburetor engine (round):

height - 62 mm;
outer diameter - 232 mm;
inner diameter - 182 mm.

For injection engine (rectangular):

width - 213 mm;
length - 213 mm;
height - 58-60 mm.

Filtering element with zero resistance

There is another type of filter element for injection motors - a filter with zero air resistance. This is a kind of tuning element designed to improve the air intake. The element here practically does not resist the incoming air. This significantly increases the power and pickup engine. But such tuning has three drawbacks:

the price of "zulevik" is significantly higher than the usual filter;
high fuel consumption;
the need for replacing after every 5-7 thousand runs.

Installation of the VAZ-2110 filter (injection engine)

Now let's figure it out how to independently install the air filter that it will be necessary for this.

Instruments:

a screwdriver with a cross-shaped bat;
key on 10;
wet rag or sponge for dust removal;
new filter.

The car is installed on a flat surface, open the hood, disconnect the minus terminal from the battery, we find the housing of the filter element and the corrugation to the engine in the engine compartment.

Behind the housing is the air filter nozzle of the VAZ-2110, which is put on corrugation. On it is the connector, disconnect this connector. We relax the clamp on the nozzle and disconnect the corrugation.

We unscrew 4 screws that lock the filter housing cover, remove it and set aside. Remove your filter element that has worked.

With a damp cloth or sponge wipe the inner surface of the case and the lid, removing dirt and dust. We put a new filter. Install the housing cover, tighten the screws, connect the corrugation, connect the sensor connector. We put the mass terminal to the battery, run the engine, check its operation.

Installation of air filter VAZ-2110 (carburetor)

In cars with a carburetor engine, the replacement procedure of the filter element is much easier. From instruments and means here you will need only 10 and rag.

We establish a car on a flat surface, raise the hood, find the filter housing. It has several spring latches fixing the lid. Put them and unscrew the key on a 10 nut on the centerpiece of the cover. We raise the lid, take out the old filter element, throw it out. Remove dirt and dust from the inner surface of the body with a cloth.

Install a new filter. We close the housing cover, tighten the nut, fix the latches.

Installation of the zero resistance filter with your own hands

The process of installing "zulevik" is also fairly simple and can be made independently. This will require a set of keys and cross screwdriver.

Under the hood, we find the VAZ-2110 air filter housing. Turn off the mass terminal on the battery. Turn off the DMRV connector. We release the screw of the clamp with a screwdriver and remove the corrugation to the engine.

The key is 10 (better end) unscrew the nuts that are fixing the DMRV to the filter housing. We dismantle the filter housing and remove it.

The cross screwdriver turns the screw fastening of the mass of the mass to the head of the cylinder block. Under this screw, install the mounting bracket that goes complete with the filter. Mount the sensor to the bracket with a bolt to 10. The connection must be sufficiently rigid, otherwise the DMRV fails due to vibration.

To the rear of the sensor we attach the corrugation and fix it by clamping the clamp. In front of the DMRV, we put the filter itself and press it with a pipe with a clamp. Connect the sensor connector, connect the terminal.

Change the air filter on time, because the stability of the engine and fuel consumption depends on its condition.
Conspect the filter element for its condition at least twice a month.
In cars with a carburetor engine, pay attention to the purity of the filter housing. If oil or whitish emulsion appeared in it, it means that it's time to clean the breather or changing the oil-giving rings. The filter in this case must be replaced.
Do not buy cheap filtering elements of dubious origin. It is better to contact a specialized store, where you will not only select the appropriate model, but also advise on its proper installation.
Do not install "Nulevik" just like that. If you are not a racer and not a strengther, limit the simple models of filtering elements.

The VAZ cars of the tenth family have a fairly high reliability, which you can not say about many competitors. The power plant is designed for a fairly large smooth operation. With intensive operation, the first overhaul must be carried out at 150 thousand km.

To delay the deadline for serious repair work allows reasonable operation and timely quality maintenance of the machine components. For example, more often changing air filter on VAZ 2110 In the dusty terrain, you can double the life of the engine.

We think from the first start: how to extend the service life of the motor

The resource of the car is more dependent on the style of driving and properly attribute to the vehicle. Only in second place are the quality of the manufacture of parts and assembly of aggregates.

Since the purchase of the car, you should think about how simple actions extend the life of the economy. Make it will help the following events:

the process of running systems of auto systems should be carried out only according to the modes specified by the manufacturer;
the tachometer arrow is preferably kept in the range of recommended revolutions (for "dozens": 2000 - 3500 rpm (16 V) and for 8 V: 1500 - 3000 rpm);
do not subjected to the DVS work in the red zone, because there is a rapid wear of the crankshaft support;
refrain from using the machine in winter;
with frequent ride in urban conditions, it should be 2 times more likely to change the oil, and do not regret the material resources for the last.

It is also worth remembering that it is necessary to regularly carry out fuel, oil and air filters of the VAZ 2110 car systems throughout the term of the car. The change interval in mileage units is indicated in the service instructions "Dozens".

What to pay attention to when choosing a cleaning component?

The product range provided in the market is very large, since the considered filtering element is consumable. What a firm to give preference is solved by the car owner itself, based on its own beliefs, as the quality of all products on the same level. It is worth remembering that the brand will not affect the frequency of change of consuming.

But it should still beware of poor-quality products. Buying a filter, it is worth unpacking and see its condition. It must be made of dense pressed paper. By contour, a rubber gasket (additional protection against dust) should be glued one of the sides.

Is it worth using 2110 "Nulevik" as a air filter?

The zero resistance filter can very often be seen under the hood of many cars. It immediately becomes clear from his name that the design has a smaller resistance to the air movement by the path. This provides a certain increase in power.

Before you put an upgraded filter element, it is worth thinking over the following factors:

the car distribution system is designed to apply the standard filtering system (the input resistance has already been laid in the camshaft design);
power supply will be about 5 hp And almost never feels;
the air purification process will occur less efficiently;
"Nulevik" requires frequent car wash with special means.

The owners of the "dozen" note that the sports filter should be installed with a complex tuning. To increase the thrust in the range of low and medium revolutions, it is necessary to upgrade, first of all, the exhaust system.

How to replace the filter element on the "top ten"

Replace the air filter in the VAZ 2110 intake system is absolutely each. From the tool, just a screwdriver with a cruciform tip is useful. The surgery surgery consists of the following transitions:

Unscrew 4 screws on the filter housing.
Disconnect the upper and lower parts.
Get the old filter.
Wipe the inner surface surface with a wet cloth.
Install a new component, taking into account the direction of ribbed surfaces (the correct position is indicated inside the housing).
Credit design with screws.

The frequency change of the element is not rigidly related to the mileage. When operating a vehicle in a dusty area, the replacement operation is twice as often.

The process of replacing the filter can make every driver without problems. Before you give preference to one or another component design, you should compare the above pluses and cons.

To protect the engine, an air filter is intended for different contaminants. Naturally, during operation, it is contaminated with time and requires replacement. The article provides recommendations and detailed instructions, as the replacement of the VAZ 2110 air filter is performed.

[Hide]

When must be changed?

The main purpose of the air filter is the purification of the incoming air flow from the ambient air from dust, dirt, pollutes of plants and other contaminants. Paper, foam rubber, felt or matter can be applied as a filter material. There are special zero resistance filters that allow you to increase the engine power by 3-5%. The installation of a zero filter makes sense to do on sports cars.

Over time, any filter, including zero resistance, is contaminated. The duration of the filter element service affects the degree of environmental pollution and operating conditions.

When the filter element is contaminated, the following problems arise:

the bandwidth of the filtering material is reduced;
increases fuel consumption;
the quality of the fuel and air mixture enters the cylinders is worsen;
drops engine power.

From a dirty consumor, abrasive particles can get into cylinders and damage the surfaces of the rubbing parts.

To eliminate the problems that have arisen, it is necessary to either clean the contaminated element, or replace it with a new one. The advantage of the zero resistance filter is the fact that the product is enough to rinse with a special composition and it restores its properties.

Replace preferably after 15,000 kilometers. When operating a car in a metropolis or countryside with dirt roads, it is better to have a replacement after 5-7 thousand kilometers.

Sorry, currently there are no accessible surveys.

Instructions for replacing the air filter

To replace the air filter on the VAZ 2110, the injector does not need special knowledge, so even a novice car enthusiast can be replaced.

Set of tools

There will be no special tools for the procedure.

Enough to cook:

key to "10";
cross screwdriver;
new air filter;
vacuum cleaner or compressor;
pure rag.

Prepared everything you need, you can proceed to replace.

Sequencing

Replacement work is performed on a non-working car. Machine must be put on the handbrake.

Replacing the airflower on the VAZ 2110 The injector consists of the following steps:

First of all, it is necessary to remove the negative terminal from the battery to delay the car.
Air filter on the VAZ 2110 Injector is located in front of the engine compartment.
Under the airflower body, you need a screwdriver or a finger to squeeze a plastic latch. Then you need to disconnect the connector with the wiring harness from the mass flow sensor.
To remove the cover from the airflow case, you need to unscrew four screws.
Next should weaken the clamp on the outlet air nozzle.
Then it is necessary to lift the lid and remove it from the clamp. Next, we turn over and put on the battery. It is necessary to follow in order not to damage the corrugation.
Now you can remove the filter element.
At the next stage, installing a new consumator. First, it is necessary to clean the body with a vacuum cleaner or compressed air inside from dust and dirt. Then wipe the surface with a clean cloth.
It is also necessary to inspect the air duct nozzle for integrity. If there is damage, it needs to be replaced. If the nozzle is torn, uncleaned air will fall through it.
The new filter element is neatly installed in place for the previous one. When installing, you need to pay attention to the direction of corrugations. It must be laid in the direction of the flow of air.
Installation of parts taken in reverse sequence. During the assembly, you need to follow that the filtering material under the cover of the case lay correctly and was not shed between the lid and the body, otherwise the filtering will be poor quality. In this case, dust can enter the engine.
Screw the screws on the case cover should be sequentially, it is preferably first opposite each other diagonally, not allowing that the lid shifted.

If the item is not badly contaminated or there is no possibility to purchase a new one, you can clean the filter element using a powerful compressor. The zero resistance filter is washed with a special composition.