BMW TWINPOWER TURBO LONGLIFE-01 Motor oil FE SAE 0W-30.
Fully synthetic engine oil, produced based on GTL gas-liquid conversion technology. The original Motor oil BMW Longlife-01 Fe 0W-30 is specifically designed, manufactured and tested to fully disclose the potential of BMW engines, providing their higher performance features and protection. Compared to standard products, Motor oil BMW Longlife-01 Fe 0W-30 provides improved fuel efficiency, which fully allows BMW engines to implement the features of EfficientDynamics technologies.
Benefits:
- Proven fuel savings with gasoline engines according to the parameters of the new European Riding Cycle NEDC accounts for at least 1.0% higher than BMW Longlife-01 products.
- stability of performance in a wide range of operating temperatures and engine loads, even in extreme operating conditions.
- lighter cold start at negative temperatures.
- The patented technology of active cleansing protects against the formation of sediments and corrosion, thus extended the service life of the engines.
- High level protection against wear.
Applicability:
- For gasoline engines since 2002 release. Currently this: N1x, N2x, N4x, N54, N55, N63, N74 and others.
BMW tolerance: LongLife-01 Fe
SAE viscosity class:SAE 0W-30
Quality class by ACEA: A5 / B5.
Quality class by API: SN.
Motor oil BMW M TwinPower Turbo SAE 10W-60.
BMW M TWINPOWER Turbo SAE 10W-60 engine oil is created specifically for BMW M engines.
Thanks to the use of innovative technology for the production of GTL base oils, the engine is protected at a level that exceeds industry standards. This engine oil maintains the optimal purity of the BMW M engines and allows you to fully use their potential.
Motor oil passed complex tests and allowed to use in BMW M Engines.
This engine oil is made by a BMW concern to use as a all-season.
Benefits:
- Provides exceptional dynamic quality engines BMW M.
Applicability:
Apply strictly in accordance with the instruction manual for your car!
Suitable for M5 / M6 / Z8 with the date of release until 2010 inclusive. For M3 - until 2013 inclusive.
BMW tolerance: BMW M.
SAE viscosity class: SAE 10W-60
Quality class by ACEA: A3 / B4.
Motor oil BMW M TwinPower Turbo Longlife-01 SAE 0W-40.
BMW M TWINPOWER TURBO LONGLIFE-01 SAE 0W-40 engine oil is created specifically for BMW engines, as well as for engines BMW M new generation. Thanks to the use of innovative technology for the production of GTL base oils, the engine is protected at a level that exceeds industry standards. This engine oil supports the optimal purity of BMW and BMW M engines and allows you to fully use their potential. Motor oil has passed complex tests and allowed to use in BMW engines, as well as in the BMW M engines of the new generation. This engine oil is made by a BMW concern to use as a all-season.
Benefits:
- Provides exceptional dynamic quality engines BMW and BMW M.
- Confident engine start when low temperatures.
- Excellent wear protection.
- The patented active cleaning technology protects against the formation of sediments and corrosion, thus extended the service life of the engines.
Applicability:
Apply strictly in accordance with the instruction manual for your car!
- for gasoline engines and BMW diesel engines without squeeze filter.
& ndash for all BMW M cars, except:
- M5 / M6 with the date of release until 2011
- M3 with date of release until 2014
BMW tolerance: Longlife-01.
SAE viscosity class:SAE 0W-40
Quality class by ACEA: A3 / B4.
Engine oil BMW TwinPower Turbo Longlife-01 SAE 5W-30.
BMW TWINPOWER Turbo Longlife-01 SAE 5W-30 engine oil is based on GTL technology. This ensures the protection of the engine at the level, which is superior to industry standards. This engine oil supports the optimal purity of BMW engines and allows you to fully use their potential.
Benefits:
- Confident start of the engine at low temperatures.
- Excellent wear protection.
- The patented active cleaning technology protects against the formation of sediments and corrosion, thus extended the service life of the engines.
Applicability:
Apply strictly in accordance with the instruction manual for your car!
- For all BMW gasoline engines.
BMW tolerance: Longlife-01.
SAE viscosity class: SAE 5W-30
Quality class by ACEA: A3 / B4.
Engine oil BMW TwinPower Turbo Longlife-04 SAE 0W-30.
Motor oil BMW TwinPower Turbo Longlife-04 SAE 0W-30 is based on GTL technology. This ensures the protection of the engine at the level, which is superior to industry standards. This engine oil supports the optimal purity of BMW engines and allows you to fully use their potential.
In comparison with ordinary motor oils, it is characterized by improved viscous temperature indicators, providing high fuel efficiency.
New BMW original engine oil allows you to use the full potential of BMW engines.
This engine oil has passed comprehensive tests and is approved by the BMW concern as the All-season.
Benefits:
- Stability of performance in a wide range of operating temperatures and engine loads.
- Confident start of the engine at low temperatures.
- Excellent wear protection.
- The patented active cleaning technology protects against the formation of sediments and corrosion, thus extended the service life of the engines.
Applicability:
Apply strictly in accordance with the instruction manual for your car!
BMW tolerance: Longlife-04.
SAE viscosity class: SAE 0W-30
Quality class by ACEA: C3.
Motor oil BMW TwinPower Turbo Longlife-04 SAE 5W-30.
BMW TWINPOWER Turbo Longlife-04 SAE 5W-30 engine oil is based on GTL technology. This ensures the protection of the engine at the level, which is superior to industry standards. This engine oil supports the optimal purity of BMW engines and allows you to fully use their potential.
In comparison with ordinary motor oils, it is characterized by improved viscous temperature indicators, providing high fuel efficiency.
New BMW original engine oil allows you to use the full potential of BMW engines.
This engine oil has passed comprehensive tests and is approved by the BMW concern as the All-season.
Benefits:
- Stability of performance in a wide range of operating temperatures and engine loads.
- Confident start of the engine at low temperatures.
- Excellent wear protection.
- The patented active cleaning technology protects against the formation of sediments and corrosion, thus extended the service life of the engines.
Applicability:
Apply strictly in accordance with the instruction manual for your car!
- For all Diesel engines BMW with a soup filter and without it.
- Application B. gasoline engines BMW.
permissible only in the EU region, including Norway, Switzerland and Liechtenstein.
BMW tolerance: Longlife-04.
SAE viscosity class: SAE 5W-30
Quality class by ACEA: C3.
Engine oil BMW TwinPower Turbo Longlife-12 Fe SAE 0W-30.
BMW TWINPOWER Turbo Longlife-12 FE SAE 0W-30 engine oil helps to save fuel, supports optimal purity, provides a high degree of BMW engines protection and allows you to fully use their potential.
The LOW-SAPS formula provides protection for the diesel engine filter from contamination.
This engine oil is designed specifically for BMW car engine and differs from conventional engine oils in the fact that it will fully allow the engines to implement the features of EfficientDynamics technologies.
Motor oil passed comprehensive performance tests and allowed to use BMW concern as energy-saving and all-season.
Benefits:
- proven fuel economy diesel engines According to the parameters of the new European Riding Cycle, the NEDC is at least 1.5%.
- Stability of performance in a wide range of operating temperatures and engine loads.
- Confident start of the engine at low temperatures.
- Excellent wear protection.
- The patented active cleaning technology protects against the formation of sediments and corrosion, thus extended the service life of the engines.
- Low oil flow rates.
- a new composition of a package of additives with a reduced content of substances forming ash.
Applicability:
Apply strictly in accordance with the instruction manual for your car!
- This oil is allowed to use only for certain models of diesel and gasoline engines BMW new generation. For information on applicability, refer to your BMW dealer.
- The use of BMW gasoline engines is permissible only in the EU region, including Norway, Switzerland and Liechtenstein.
BMW tolerance: Longlife-12 Fe
SAE viscosity class: SAE 0W-30
Quality class by ACEA: C2.
Engine oil BMW TwinPower Turbo.
Motor oil is one of the most important operational materials of modern high-mounted BMW engines. BMW engines traditionally impose very stringent requirements for its properties. In order to be allowed to use, the engine oil must have not only excellent lubricators, but also have special properties and perform a number of necessary functions:
Energy Saving
Oil should allow the engine to work using Efficient Dynamics technology: help reduce internal losses, raise fuel efficiency and provide exceptional dynamic qualities. New Specifications of BMW LL12FE motor oils and BMW LL14FE + allow new and promising BMW engine models to achieve unsurpassed fuel and economic indicators.
Melting
During operation in the engine, various contaminants are inevitably formed. The oil must wash off and remove them to the oil filter, not allowing the formation of deposits.
Anticorrosive
The oil should protect against corrosion and not be aggressive to friction surfaces and engine parts.
Launchers and viscosity
Oil should work equally well in the conditions of cold engine launches at extremely low temperatures and under conditions at high temperatures, as well as on increased revs.
Cooling and sealing
Any BMW engine is a brainchild of high innovative technologies. In the process of operation, some friction surfaces are heated to very high temperatures and oil should continuously allocate the highlighted heat. Also, the oil carries in itself the function of the combustion chamber seal, allowing you to achieve the magnificent power and fuel and economic characteristics of the engine.
Durability
Oil is one of the main operational materials to ensure the operation of the engine, so resistance to oxidation, low speed of aging and low flow Oils on the avgar are one of its key qualities.
The entire spectrum of these characteristics was taken into account by BMW engineers when developing new original engine oils. Created by them The newest ruler of oils absorbed all the most advanced achievements from the field of technologies for the production of motor oils. The entire ruler covers needs and takes into account the features of the operation of BMW cars in many corners of light. It also concerns countries with a harsh climate and unstable fuel quality, where high risk of failure of expensive elements of a system to reduce the level of toxicity of exhaust gases. The basis of the production of original Motor oils BMW is a GTL * technology complex that allows you to obtain crystal clear basic oils from natural gas.
Therefore, using the original engine oil BMW TwinPower Turbo, you can be in full confidence that your car's engine is under the protection of high technologies even in the most difficult modes and operating conditions.
1. Atively attend your official BMW dealer for the next replacement of the original Motor oil BMW TwinPower Turbo through the mileage interval prescribed by the manufacturer, or following the instructions on-board computer Your car;
2. Control the level of engine oil at least once every two weeks, using the measuring probe of your BMW. Electronic system automatic control The level and quality of oil will inform you in a timely manner of the need for topping or replacing the oil.
3. Purchase the original BMW TWINPOWER Turbo engine oil only in official dealer centers BMW. Only this way you can protect yourself and your car from counterfeit products and get the highest quality items.
- Washing-dispersing properties give motor oils the ability to flush and hold in its volume contamination resulting in the engine. Due to this, the pollution, washed off by oil, is delayed by an oil filter, not allowing the formation of deposits.
- One of the most important properties of engine oil is its viscosity. It not only defines the lubricating oil properties, but also affects energy loss when the engine is running. Optimally selected oil is capable of providing not only the maximum protection of the engine from wear, but also reduce fuel consumption.
- An indicator characterizing the degree of change in the viscosity of the engine oil depending on the temperature is the viscosity index. All original BMW TWINPOWER Turbo oils possess high index Viscosity, which allows them to maintain excellent lubricating properties at high temperatures and in difficult conditions of operation of the engines, as well as ensure the ease of launch even at very low temperatures.
- In the process of production, in the base oil, manufactured using GTL * technology, a package of additives is introduced, which further determines its anti-wear, viscous temperature, antioxidant, anti-corrosive and washing-dispersing qualities.
- Engine oil performs a very important function - is the engine combustion chamber seal. Having a certain set of properties and qualities, oil in the process seals the volume of the combustion chamber and ensures the implementation of its power, dynamic and fuel and economic indicators.
- To meet high BMW quality standards, new original BMW TWINPOWER Turbo engine oils and original oil filters BMW pass a series of complex laboratory tests, as well as under constant quality control.
Advantages in innovation
- The use of original Motor oils BMW TwinPower Turbo allows you to achieve maximum engine protection from wear in various modes and operating conditions.
- Optimally selected viscosity characteristics provide ease of engine starting under conditions of low temperatures.
Efficiency and environmental friendliness
- Promote a decrease in fuel consumption and, accordingly, a decrease in CO2 emissions into the atmosphere.
- Compatible with the components of the neutralization systems of exhaust gases and does not have a negative impact on them.
Preservation of value
- Extremely compliance with specifications ensures reliable engine operation for a long period.
- Increased oil life and its stability allows you to increase the intervals of its replacement.
Very often there are questions which oil pour into the BMW engine. What pouring and how to pour. On the forums of the branch with the choice of oil, they are latter, there are huge disputes that it is necessary to pour, but it is not necessary. Here I would like to express my dealethene view about this.
Fracking the E34.SU forum, allocated several oils and the theory that we need to pour, and what is not.
So, pouring into the BMW engines you need a complete synthetic oil, with a viscosity index is better than 40-50.
The viscosity index 60 for old engines can be destroyed. Since the engines have a large number of Nagara, and the oil is very thick - in the end all channels of the "circulation" of oil are clogged. But at the same time, the number of noise from the engine can decrease with this oil and it may stop it through Chur.
The viscosity index 30 will be too liquid and the engine may very much will "eat" oil. Usually oils with this index - semi-synthetic.
You need to change the oil every 7-10t.km.
Wash the engine with special Tools - Not recommended. Because The engine is old, then this tool can kill it. In the same time good oil It has means for cleaning the engine. And it will be better to change it more often than to wash. A slight mixing of oil (for example, when replacing oil in the engine during plum, oil remains) different manufacturers and different types - permissible.
Oil must comply with BMW Longlife-01 certification
So, now manufacturers of oils that I allocated:
Motul 8100 X-Cess 5W-40
Mobil 1 PEAK LIFE 5W-50
Castrol Edge SAE 0W-40
Castrol SLX Professional Longtec 0W-40
LIQUI MOLY MOLYGEN 5W-50
But in Russia, the production of oil under Castrol differs with the oil, which is produced in Germany. Therefore, if you want to pour Castrol, then better Leite original oil BMW, it costs not such space money.
All these oils are good to some extent if you buy them in proven places, official dealers. And not in the transition for 100 rubles.
Recommended motor oils for BMW GROUP engines
http://tis.bmwcats.com/doc1104549/
There is a firm shell oils, Total, Elf, Araral, BP, Agip, Addinol.
In fact, the choice of oil is an individual occupation, you can pour the mineral water tzovsky, and think that you have a BMW. And then everyone says that BMW dear in the service staff car, due to the fact that you had to capitalize the engine.
Many motorists are asked about how to choose the right oil for BMW. Therefore, it is necessary to disassemble this problem in more detail. Note that motor fluids on various models BMW should be conditionally divided into special cars and certified, that is, with admission.
If we are talking about productive oil specifications, then for BMW 1-7 series applicable lubricants undergoing laboratory tests for quality and strength, as well as official confirmation from the German company.
As for cars with diesel engines, it is allowed to use universal cars in the case when they fully comply with the instruction manual for a vehicle model.
Any oil for BMW must have a special tolerance. If there is no one, then this means that the German car manufacturer did not confirm the quality certification and this liquid is better not to use. Certified autosal from BMW have a special name Longlife.
They fully comply with international specifications ACEA B3 / A3, special tests were held, as a result of which the car increased its working resource before execution, Oil Service. Recommended in summer and winter time, depending on the choice of viscosity degree.
Oils for BMW
Starting since 2001 concern BMW. Began to produce upgraded aggregates that meet new trends in the use of car. Thus, special oils were developed, divided into four groups, depending on the service life and model of the car:
LongLife 01.
This group of cars fully corresponds to technical characteristics and requirements of BMW cars. It is recommended for use in engine N42 and N62, that is, in cars 3 series and E59. Also recommended for fill in old engines on E39 and M43.
LongLife 01Fe
These are almost complete analogs of LongLife01, however, they are characterized by a lower degree of viscosity, due to which they provide low fuel consumption. In addition, this group is permissible only for cars with engines receiving low level Viscosity.
Longlife 98.
These are motor fluids that fully meet international standards for increased operation of the vehicle until the moment. They were introduced into use in 1998, therefore recommended for the OI with forced system Ignition, for example, E39, made up to 2000.
LongLife 04.
These cars passed the whole cycle of laboratory tests BMW. Recommended for use in the updated auto models. It is undesirable to use them in older versions made until 2004.
Like certified, special additives fully comply with the adopted quality standards ACEA B3 / A3. LONGLEYFA 04 is an earlier version of all. Special Oil is recommended for use on old versions of a car with a replacement frequency up to 15,000 km.
Motor oils for BMW X5
Released in 1999, X5 models have become a prototype such popular high-class SUVs of the luxury. The first versions of cars with the Body E53 had a number of advantages in the technological plan, previously used in prestigious jeep Land Rover.belonging to the BMW Concern.
The second modifications of the car with the body E70 were issued in 2007, and the third generation in 2013 F15. The main production is located in the USA, and since 2009 some models are collected in the Kaliningrad region.
X5 operate on diesel and gasoline engines 3 and 4.8 liters with two working bridges. Cars in the body F15 are equipped with 2 liter engines on a diesel basis. Depending on the auto model, it is necessary to select one or another car. If we are talking about highly efficient and alternative version Longlife, then the Total Quartz 9000 should be used.
Total Quartz 9000.
This is a highly efficient oil, one of the best BMW X5 power units. It can be filled both in gasoline and in diesel engine, released in 2003.
Fully complies with LongLife01 international certificates and the requirements of ACEA B4 / A3. Effectively protects the motor from premature wear under any operating conditions of the vehicle.
The high level of oil yields allows you to use it regardless of the period of the year, especially in the cold time. In addition, it cleans the engine with various sediments and does not allow the formation of new precipitation.
Total Quartz lubricants are suitable for the maximum replacement interval in cases where this is recommended by the BMW manufacturer.
Some types of BMW oils are all-season. Exceptions include compounds with a degree of viscosity on SAE 10WX. Their use is allowed on BMW vehicles with temperature conditions not lower than 20 ° C.
You should not forget that in most cars it is recommended to fill lubricants that meet the factory specification of Longlife. Even if the oil is synthetic and has a small fluidity, this does not mean that it applies to BMW.
An exceptional factor in the use of a certain lubrication is tolerance from the manufacturer.
Butter for BMW E60
In 2007, German producers decided to make some changes to the E60 BMW exterior. Thus, the interior design, the form of the bumper, was improved optics. After updating, the car is no longer upgraded, and the plant began producing new versions in the body F10.
In the technical context, the 5th generation of BMW, practically did not differ in diversity, since the main components and parts were used from old complete sets.
On the vehicles Diesel motors were installed with volumes from 2 to 3 liters, issued power to 286 hp. Gasoline motors With volumes from 2 to 5 liters have power from 170 to 507 hp
The models were very sensitive, so manufacturers recommended the use synthetic oils With different levels of viscosity.
Main characteristics and types of oils for 5 generation
- synthetic base;
- viscosity level 5W30, 5W40;
- consumption - up to 4.25 l;
- consumption - up to 700 ml / 1000 km of mileage.
- replacement interval - to achieve 10,000 km.
Engine M54 2.2:
- synthetic from the manufacturer;
- viscosity level 5W40, 5W30;
- pouring volume - 6.5l;
- consumption - up to 1 l per 1000 km;
- replacement frequency - up to 10,000 km.
Silence unit N52 B25:
- original factory oil on a synthetic basis;
- oil consumption of 1 l per 1000 km;
- viscosity class 5W30, 5W40;
- replacement frequency - 10,000 km.
Automotive Oil Rating for BMW
Motul 8100.
One of the most popular synthetic oils for BMW cars is Motul 8100. This line is effectively used for many versions of vehicles.
Liqui Moly 5W40.
The German oil oil oil on a synthetic basis with a 5W40 viscosity class is perfectly operated on BMW power units. This is one of the most expensive motor fluidscontaining molybdenum and washing-dispersing additives. Its use allows you to reduce wear up to 50%.
Mobil 1.
Motor lubricant Mobile 1 is also very popular with the owners german cars. The new low-viscosity of the 0W40 viscosity class has perfectly proven themselves in European territory under heavy road conditions.
In addition, oil protects the engine from converting coarse particles and its further damage. Periodic replacement provides long and uninterrupted operation of BMW.
If you do not use the above recommendations for the replacement of oil on BMW vehicles, the owners can reduce the working potential of the power unit. Since the illiterate use of a lubricant can lead to rapid wear and deformation of the system.
Therefore, choosing a lubricant, special attention Pay for factory recommendations and characteristics.
Many car owners are interested in the question, what oil to fill in BMW and is it possible to make mix different types Engine oils. If it is necessary to replace the oil, the question of the correctness of this procedure is also important, and whether the need to wash the engine before filling.
First of all, you need to open the passport details of the car, which will be prompting which type of oil is prescribed to replace the manufacturer. In the event that you purchased a used BMW, you need to ask the previous owner, which oil was used earlier.
It should be avoided using several types of oils. In any case, after purchasing a used car, it is necessary to immediately rinse the engine and replace the necessary oil type. Original varieties of engine oils from leading manufacturers are quite expensive.
However, in auto center and shops are sold cheaper counterparts. The quality of these oils is quite high, and auto center consultants will help you choose the necessary option for your German.
What are the types of cars?
What oil to fill in BMW is synthetic, mineral or semi-synthetic? Let's immediately declare that before the fill should not rinse the engine using various washing fluids. This applies to engines that are equipped with so-called hydraulic components that adjust valve gaps.RespectivelyIf the oil is allowed for use, then on the package there must be an appropriate inscription, otherwise the products have not passed the certification.
In general, the BMW engines do not need pre-flushing before the fill of the oil, since the high-quality certified product is able to "wash" the engine is very high quality. Now you know which oil to fill in BMW. It is also no need to rinse the motor if you decide to change the type of oil used. When replacing one engine oil to another, it is desirable that they are one brand, and the replacement itself should be carried out every 13 - 15 thousand km.
Despite the experience and great variety lubricating productsThe owners often fall into a dead end, choosing engine oil for BMW, without understanding how much the engine is most suitable. On the one hand, it is necessary to pour what automakers recommends. On the other hand, the recommendation is not very clear, since there are recommended and admitted. Moreover, the tolerance is issued to almost all the compositions corresponding to qualitative and viscous characteristics.
So, every driver of such a car should know that Lubricants for the BMW car are divided into two groups:
- Certified, they are recommended;
- Allowed, or allowed.
According to the manufacturer's specifications, the BMW gasoline models are allowed to pour oils that have passed laboratory tests that have received official confirmation of BMW. This group includes almost all cars, ranging from semi-synthetic aPI class SJ, SH, to SAE 10W-40 and higher.
In machines equipped with a diesel installation, it is allowed to use the universal fluid if its characteristics meet the requirements of the technical documentation of the car. Based on standard ACEA.. On the packaging of engine oil, which received the resolution of the BMW, the corresponding tolerance is sure to printed. If it is absent, therefore, the oil has not passed the certification of BMW, it is prohibited to use it.
Certified lubricants call Longlife. Properties comply with the current ACEA-A3, B3 standard. They were tested in the BMW laboratory, designed for long operationbelong to the all-season.
What oil to fill in BMW
Starting since 2001, the BMW concern began to produce brand new power plants. They needed to develop new lubricating products with more stringent requirements. As a result, several types of oils differ for a long time operation.
Longlife-01.
Specifications of lubricant meet all BMW requirements, can be used in vehicles equipped with Motor N62 - N42. You can also pour in early BMW models, released before the onset of 2000. The exception is S62, CNG, M43.
LongLife-01 Fe
Differs from LongLife-01 very low viscosity ratio. Promotes economical flow of fuel used. It is allowed to use only in the installations capable of working on lubricanthaving low viscosity.
Longlife-98.
The technical parameters respond to the OilService standard, which began to operate after the occurrence of 1998. Applicable in cars equipped with forced ignition. Do not pour B. power units S54, N42, S62.
Longlife-04.
Such a tolerance refers to motor oils undergoing tests in the BMW laboratory. These products can be safely pouring into newest cars. It is forbidden to use in the car made before the occurrence of 2004.
The compositions belonging to the Special Oil group, similarly certified products, meet the requirements of ACEA- A3, B3. In principle, this is an early version of the car bMW series Longlife.
Similar lubricants Professionals advise to fill in the engine outdated machines BMW. The replacement period should not exceed 15,000 km. All special oils belong to the all-season group. Exception - SAE 10W-X. It can only be used at a temperature of more than 20 degrees.
Choosing which oil to fill in the BMW engine, it is better to use only the above oils. No matter how spaced any other lubricant if there is no message about the BMW tolerance, it is strictly forbidden to use it.
A few words about cars that have passed overhaul. For engines BMW There is no hardening oil. You can immediately pour high-quality certified. Mark every driver selects individually, adhering to the above recommendations.
