Dashboard VAZ 2110. The main designations of icons on the VAZ instrument panel. Description and location of indicators and appliances on the panel

Many are faced with problems related to car repair. This article will consider how to independently upgrade in the VAZ 2110 instrument panel.

General characteristics

The VAZ 2110 car project began to engage long before its launch in mass production. The serial car came out from the conveyor in 1996. This car It was not similar to any of the previously released. VAZ 2110 is a passenger front-wheel drive vehicle.

The car is designed to ride in urban conditions with a solid coating. The vehicle relates to the sedan type, has four doors, the body is completely metallic. Carburetor and injector engines with a volume of 1.5 liters. Depending on the configuration, the vehicle has equipped fogy Farams, electrical windows, heated front seats, heated side mirrors with electric drive, on-board computer. Also on the car, if you wish, you can install an electronic anti-theft mechanism, airbag, air conditioning, brake anti-lock system, add lighting. The upholstery of the cabin is made of tissue material. For the transport of bulk cargoes and increase the volume of trunk rear seats You can fold.

VAZ 2110. Devices panel. Description

The dashboard includes the following sensors: speedometer, tachometer, engine temperature sensor, fuel level sensor.

In the VAZ 2110, the instrument panel is fixed with two screws. Speedometer shows how fast the car moves. Using a tachometer, the number of engine speeds determine. On the instrument shield there are two meters of distance traveled. One meter shows a kilometer that the car drove for all the time of operation, the second is "daily". The daily counter can be reset using the corresponding button. The backlight of the VAZ 2110 instrument panel is turned on by the low-light button.

How to remove the instrument panel?

In order to remove the instruments panel in the VAZ 2110, the following actions must be performed:

• from rechargeable battery need to disconnect the cable of the minus terminal;
• unscrew the screws and remove the combination of instruments;
• unscrew the 2 mounting screws that the instrument panel is attached to the lining, and remove the combination of instruments from the socket;
• need to disconnect dashboard Wire block.

To install the instrument panel, you need to perform actions strictly in reverse sequence.

New pad in the instrument panel

In the VAZ 2110, the instrument panel looks small and can quickly get bored, and I don't want to buy alternative with the built-in on-board computer, because you will need to spend a lot of money. The process of upgrading the dashboard is an urgent topic. The easiest way to convert the instrument panel is to install a special lining that can easily be bought in automotive stores.

In terms of cost, they are inexpensive, and there are many options with different drawings. So find a lining in your own taste will not be a lot of work.

In order to install the lining, you need to remove the instrument panel completely. The next step must be carefully removed from the arrow panel. When assembling the panel and install the arrows, it is necessary to make sure that the driver will not distract anything when the vehicle is moving, otherwise you will have to repeat the panel and redo it. Well-chosen paddle panels VAZ 2110 will give her best view And it will be harmoniously combined with the interior of the car.

Tuning Panel Devices VAZ 2110

Today there are many options how to make tuning VAZ 2110 with your own hands. One of the easiest and not very costly methods is tuning the instrument panel. To do this, you will need to purchase material and stock patience. Convert the instrument panel in several steps. Before upgrading, it is necessary to remove it. The next step can be changed the usual lamps of the VAZ 2110 instrument panels to LED. It is desirable to install LEDs in previous places, but if necessary, you can make additional holes. There are several ways to change the dashboard light:

You can change the backlight of the odometer. With the help of the blade you need to clean the odometer from the glue, then deploy and put it back. After that, the backlight of the dial will change from green on blue.

VAZ 2110 instrument panel lamps can be replaced by lED ribbon.. To change the color, you need to erase the blade of the color filter layer. Remains can be removed using a solvent. The next step must be consolidated by the LED tape inside the dashboard. You can connect the ribbon to the board where the bulbs are connected. If you erase with the shooter red, and then apply a white varnish on them, which is used for manicure, it is realistic to get a color, like on the selected tape.

You can implement the automatic replacement of the backlight. To do this, you need to purchase a LED tape with multi-colored diodes and connect to the dashboard.

Shift different colors Make using a separate key connected to the car electronics.

Electrical diagram of instrument indication block

A detailed electronic control circuit containing a beep and ten LED alarms is included in the VAZ 2110 car indication unit. VAZ 2110 Devices Panel Indicators Show the following faults or warnings:

• insufficient coolant;
• insufficient oil level;
• insufficient amount of washing fluid;
• malfunction of outdoor lighting lamps;
• undussed seat belts;
• erase brake shoes front wheels;
• open door by car.

Refinement of noise insulation of the VAZ 2110 panel

Many car owners of VAZ 2110 are faced with such a problem as a script panel when driving a vehicle. One of the outputs in this situation can be refined to refine noise insulation. To do this, it is necessary to disassemble the panel into three parts, which are held with each other with the help of mounting bolts. A model can be used for "antiscrepa", and for noise absorption, you can use the bitoplast or other materials with similar properties. In those places where plastic elements come into contact with each other, it is necessary to use the model, they need to clog all the holes from the fastening elements to reduce the loss of air flow losses. Reverse side Torpedes need to be blocked by bitoplast. In most cars, the screensions are susceptible to the fuses and glove box. To reduce the screens in the area, where the box is adjacent to the panel, you need to use the model, and the Bitoplast must be attached to the bottom of the glove. One of the main advantages of the Bitoplast is that it is well compacted. In connection with these problems, when assembling the panel, it should not appear. Such simple actions will help to easily provide silence and eliminate noise and screens inside the car.

VAZ 2110 instrument panel. Price

The standard type of dashboard VAZ 2110 looks pale, but in order to add it the originality, you can make several simple operations. One of the easiest is the replacement of the backlight and the insertion of new devices. This can be implemented in the following ways:

• Change yourself backlighting the instrument panels and buttons. To do this, you can use a special fluorescent paint: change the color of the numbers, arrows, notes. You can also replace ordinary light bulbs on LED or install LED tape.
• Purchase ready-made overlays in the instrument panel (a large range can be found in the car markets). The pad of the instrument panels VAZ 2110 will give a more stylish look.
• Purchase and put a new instrument flap (there are with different modifications: digital and arrow) with a built-in on-board computer.

• Replace fully dashboard or torpedo (for this you will need more time and financial costs).

VAZ 2110 instrument panel, as in any car both imported and russian production It is obliged to determine the overall condition of the car, and should show all the information about: the amount of fuel, engine temperature, and the presence of (quantity) of the engine lubricating elements.

In addition to the above data, the VAZ instrument panel on the display issues all errors (fluid malfunctions) of the car.

Next in the article I will give you full description Dashboard VAZ 2110 and tell you about the description of the buttons, lamps, light indicators, tell you about common errors that may appear on your display on the way.

Description of the dashboard buttons VAZ 2110

Well, we immediately move on to the description of the buttons on the VAZ 2110 dashboard.

As can be seen from the screenshot on the VAZ 2110 instrument panel, there are only 4 buttons - let's move on to their description.

1. The on / off button front fog lamps.
2. Enable / disable outdoor lighting.
3. Heating rear window
4. The on / off button rear fog lamps.

In addition to the buttons on the dashboard, there are other, which are under the oven, next to the magnetic in the cabin. Let's learn their functions:

Many owners of the VAZ 2110 are asked - why do you need these same 4 buttons that are on the dashboard under the oven. The answer will seem pretty banal to you:

These buttons do not really play any function, I think engineers working on a dozen wanted to add electrical windows into the car, but for some reason forgot to do this.

Okay, it was a joke! In the case, these buttons are responsible for the following:

1. Enable / disable recycling
2. Enable / disable emergency light alarm
3. Installation button additional equipment (for example, windows)

Description of indicators and lamps on the instrument panel VAZ 2110

Well, what, we laughed, we now turn to the main: description of indicators and lamps on the VAZ 2110 instrument panel.

1. Indicator of the presence of oil in fuel
2. Indicator inclusion manual brakes
3. Automatic battery automatic charging indicator
4. Engine performance indicator
5. Turning on the left turn
6. Turning on the right turn
7. Indicator far Light Far
8. Level indicator brake fluid
9. Fuel availability indicator
10. Indicator control lamp inclusion of dimensions

All the above described indicators (except indicator indicators and turn on the headlights) are warning. In case they light up, the car has a problem.

Information Indicators of the Diatechnology Panel VAZ 2110

All information indicators of the VAZ 2110 system system are indicated by arrows here they are in the photo:

1. The presence and temperature of the coolant
2. Tachometer (shows the number of engine revolutions, unforgettable by 100)
3. Speedometer (shows the speed of the car. Here it is not necessary to multiply.
4. This display shows the total / daily mileage of the car.
5. Indicator of the presence of oil in the engine.

As you can see the VAZ 2110 instrument panel is not as difficult to explore. But very often there are situations when errors appear on the dashboard. Let's now consider these errors in more detail.

Errors displayed on the dashboard VAZ 2110 and how to eliminate them.

For example, I will take a screenshot with the dashboard indicators, which I have already shown in this article.

1. In the event that the indicator of the presence of oil in the fuel lights up, we recommend that you check it. To do this, open the hood of the car and look at Shup. If he is in the level of oil, then the chip is most likely, in the instrument panel itself.
2. You caught fire indicator parking brake (manual), most likely the problem in the cliff of the cable.
3. The rechargeable battery charge indicator shows you the errors associated with the generator. If he caught fire, I recommend to check the generator belt (for a break). In general, this icon on the instrument panel shows chain malfunction electrical system car.
4. Engine malfunction ( Check Engine), tells you about the unstable engine operation.
5. Additional indicator of engine operation
6. Turning on the left turn - information indicator
7. Enabling the right rotation- information indicator
8. Far Light Indicator Foreign Information Indicator
9. This indicator shows the presence of the level of the brake fluid. In case of malfunction, check the availability of the AUT in your car.
10. This indicator shows the presence of fuel. In the event that he caught fire in the tank you have about 5 liters of gasoline. I recommend that you refue.

With any mechanism you need to somehow communicate in order to control its condition and be aware of the performance. Therefore, the dashboard in vehicles carries not only aesthetic load and serves not only by the tuning object. In the purpose of the instrument panel of the VAZ 2110 and all cars of this family today together and try to find out how to repair it and what to pay attention to it.

Layout of the VAZ 2110 instrument panel

The VAZ 2110 dashboard is made in the form of a combination of instruments, control lamps, and in some modifications with the possibility of placeing a side computer. Traditionally, plastic, from which the panel is made, not the highest quality, therefore, during operation and overheating, its deformation is not excluded, which affects not so much appearancehow much to operate devices.

Standard tidy includes four shooting devices, a route computer display, a odometer reset button and a set of signal lamps. The first on the list, the extreme left device is the coolant temperature pointer, it is shown in the diagram under the first number. The arrow device has a fission price of about 50 degrees. A red strip is highlighted a zone of a critical high inaperraper, in which the coolant boil is possible. Control lights and indication of the climate system are deposited on the additional panel.

The speedometer on the instruments' penetrations (2) is an arrow device, but not with a mechanical drive, as it was in the vehicles of senior issues, but with electric. In fact, it is a voltmeter that reacts to the pulse produced in the speedometer sensor, and it is installed in the gearbox. The greater the voltage at the output of the sensor, the higher the speed indicates the device. The factory error is approximately 5 km / h, however, it is necessary to take into account the diameter of wheels that strongly affect the accuracy of the electrical speedometer readings.

The tachometer on the instrument panel is indicated by the number 5 and it also represents an electrical device that reacts to the pulse produced by the speed sensor crankshaft. The sensor transmits readings first on the electronic unit Motor control for analysis and correction, after which the pulse enters the control circuit of the tachometer. The red zone of the tachometer is noted unacceptable high revs, in which rapid wear of engine parts, incorrect operation and an increase in the temperature of the coolant is possible. Extremely unacceptable long work Motor in the red zone of the tachometer.

Arrow indicators on the VAZ 2110 panel

The number 6 indicates the fuel level indicator in the gas tank. The instrument readings are not particularly accurate, but it is generally clear that at the mark 0 the tank is almost empty, there are several backup liters of fuel, on the ½ tank half the full or empty, who, as you like, and on 1 gas tank full. The light indication of the fuel level is instructed to engage in a control lamp 7, which begins to flash when the reserve of the car's stroke on the left fuel is about 100 km, and this is about 9-9.6 liters. In order to fuel pump It did not fail, it is not allowed to produce fuel from the tank completely.

Table Lamps 2110

Lamps 3 and 4 indicate that the drives are included outside the car and they light up and flash immediately after turning on the right or left pointers. At the end of the maneuver, the switch key returns to its original position and the pointer must turn off automatically. If this does not happen, you should look for the reason in the Return Mechanism of the Enable Pointer Keys.

Special attention deserves a lamp that is put into the center of the tidy and on our scheme is indicated by a number 14. This is a control lamp that signals faults and incorrect work electronic system The engine control is differently called the Check Engine lamp by analogy with imported cars. When activating this control lamp followed computer diagnostic Engine and identify error codes. Part of the errors are cleaned programmatically, and part requires interference in the engine control system: to the system, ignition and other systems that could lead to errors.

Figure 12 The diagram shows a digital odometer display and a daily mileage indicator that is reset by a button located directly on the instrument panel. The top line shows the overall mileage of the car, and the bottom, reset, mileage for a certain period.

VAZ 2110 instrument panel Description of lamps and indicators of which we completed simple and familiar control lamps for any car:

The remaining control lamps: manual brakes, an emergency oil pressure in the lubrication system and critical discharge of the battery are located in the lower row in order. Let emergency lamps are less likely on your tidy, chorers and clean all roads!

Always comes such a moment when the motorist no longer wants to see the factory panel of the VAZ 2110 instruments before his eyes, and something more interesting and modern. Therefore, it simply suggests the replacement of the VAZ 2110 instrument panel. In this case, you need to start the case from searching the panels that you can install yourself without the use of special tools. In the photo, the instrument panel VAZ 2110 is newer than new and beautiful:

The only thing that is needed is attention, Passatias and a cross screwdriver. And, it must be said that the price of the instrument panel of the VAZ 2110 does not always turn out to be the transcendent, which allows it to be replaced. In general, the VAZ 2110 instrument panel, the price of which on average is around 10-15 thousand rubles, the thing is necessary for each car, so if you wish, you can find a panel for every taste, even there are modern models with digital speed meters from the manufacturer of Gamma, the price of They will be of course higher, but it will look very great and modern.

Buy the dashboard of the VAZ 2110 instruments can be disassembled, bazaars, auto-stores, in online stores, you can also search on bullet boards, on Slando, hammer, etc.

Removing the instrument panel VAZ 2110

Without it, naturally, do not do if you want to make a car more modern and install on it, for example, the Euro-panel of the VAZ 2110 instruments. Consider in detail each stage of removing the old dashboard of the VAZ 2110 instruments. Note that it is possible to remove the instrument panel of the VAZ 2110 Viewing it into separate details, which will make the process more convenient and rapid. In addition, the whole process is the same as on tens of tens, since the instrument panel of the VAZ 2110 (tuning) is not particularly different from the standard instrument panel dozens.

Before starting work, you can read the description of the VAZ 2110 instrument panel for use and of course, examine the diagram of the VAZ 2110 instrument panel. To begin with, disconnect the terminal from the negative battery output, then remove the decorative steering column overlaps, the steering wheel (leave the sound signal plate on place), right and left steering wheel switches (do not touch their connector). After that, disconnect the tips of the two wires from the submissive switch connector.

Taking advantage of a slotted screwdriver, remove the headlamp control knob, take a 100 millimeter brake key to a 21 millimeter and unscrew the nut of its fastening, climbing its rod into the hole of the VAZ 2110 instrument panel.

Now you can open the lid mounting block. In the niche block of the relay and fuses of the cross screwdriver, unscrew the screws of the left inner bracket of the VAZ 2110 instrument panel. Disconnect the spark plug wiring harness and unscrew the screws of the diagnostic connector bracket.

Now you can disconnect the lugs of the two wires that go from the braking signals switch. Unscrew the two screws for fastening the left lining of the console. Shifting it back, output her front of the engagement with the bracket and remove the lining. Take the end key to 10 millimeters and screw the panel mounting nut to the console bracket. Unscrew the screw fixing panel of the VAZ 2110 and duct.

To continue working on the removal of the VAZ 2110 instrument panel, disconnect the shods of the wiring harnesses located under the instrument panel. When you make it, you can unscrew the three screws for fastening the right lining of the console, then unscrew the right nut mounting the instrument panel to the console bracket, disconnect the cigarette lighter wire blocks.

Disconnect the wiring harness block from the fog light relay. Remove the screws of the attachment of the right internal bracket of the instrument panel, and then the right and left screws of the lower fastening of the VAZ 2110 instrument panel. You can now remove the seal, plastic lining holders and remove it, similarly by moving with the right lining.

Patty a thin slotted screwdriver on both sides of the instrument panel, remove the ventilation grilles of the blowing glasses of the front doors, and then unscrew the two nuts upper fastening The instrument panels under ventilation grids.

Take the panel to fifteen to twenty centimeters inside the cabin. Select nine connecting shoes of the wiring harnesses and remove the instrument panel from the car interior through the opening of the left front door. The installation of the new panel should be carried out in the reverse order. On this we will finish giving detailed instructions VAZ 2110 instrument panel for its removal. Now you know how to easily and quickly remove the instrument panel VAZ 2110.

Bright details on the instrument panel VAZ 2110

In the interval between the removal of the old carbon panel of VAZ 2110 and installing a new one, you can think about how you want to decorate it. Or it is possible for the old panel to make repair of the VAZ 2110 instrument panel, if you are lucky, then this repaired panel can even be sold for several thousand, that is, if you wish, you can beat off some money.

You can use neon backlight or inner LED illumination by making a single-color factory illumination of the VAZ 2110 instrument panel multicolored. You can highlight, not only the scale and arrow of the instruments, but also the "tidy" buttons using all the same LEDs and light filters. True, the main thing is not to overdo the colorful designations of the VAZ 2110 instrument panel not be distracted while driving along the night road.

In addition, you can also make improved noise insulation of the VAZ 2110 instrument panel using special materials. But this will require again disassembling the instrument panel of VAZ 2110.

Finally, we would like to clarify the instrument panel of the VAZ 2110 instruments. It is needed not to get confused when installing a new "tidy" and make it all right from the first time. In general, the pinout panel of the VAZ 2110 instruments is important and necessary. And then the instruction manual of the VAZ 2110 instruments panel, on which it is clear that the device panel of the VAZ 2110 instrument panel is quite simple and you can easily understand it:

All controls onboard devices Car, family representatives of VAZ 2110, are combined into a combination (system) of instruments. The instrument panel includes the following components: electronic tachometer and speedometer, coolant temperature pointer, fuel level and control lamps (which are present in the amount of 12 pieces).

The entire combination of devices is mounted in the appropriate nest of the instrument panel using two screws. The drainage panel of the VAZ 2110 dashboard is made in the printing method on the board using the foil Ghetinaax. The board is securely fixed on the back of the housing. The speedometer has two meters that show the traveled path: the first one is the final one, the second can be called as "daily".

The readings of the second counter, if necessary, can be reset to zero using the corresponding button. You can only reset the testimony when the car is in the standing condition. For some cars from model Row VAZ 2110 can set all components and necessary control indicators, lamps and badges.

General information about the car

VAZ-2110 is a passenger front-wheel drive vehicle, in which force aggregate Located in cross condition. The car is designed for operation on the roads, "equipped with" solid coating. Body machine - all-metal, four-door, carrier, type - sedan. In order to transport long and large-sized seats, which are in the back of the cabin, can be folded.

Thus, the volume of the trunk increases. Engines - carburetor or with different fuel injection systems - consist of four cylinders. Volume - 1.5 liters. The model has significantly improved handling characteristics, if compared with rear-wheelwater vases, thanks to the front-wheel drive layout.

This is especially noticeable on a non-safe, slippery road or during the passage of complex turns. Automotive, seats with electrical heating, practical electric windows, a modern onboard computer, a useful catalytic gas conversion, which "worked out" in the release system, as well as the electric appliance with external mirrors, providing the rear view.

You can also protect the machine, the airbag, to add air conditioning, the anti-blocking system of the brakes, give lighting using the roof hatch.

Automotive Control System Indication Block Models 2110

VAZ 2110 machine display unit contains detailed electronic circuit Control, complemented by a sound alarm, as well as ten LED alarms that inform the driver about the following states:

• oil level failure;
• coolant insufficiency;
• sweeping of washing fluid;
• possible malfunction of external lighting lamps;
• condition when seat belts are not fastened;
• brake shoe wear, which are equipped with front brakes;
• four signage to each door.

Detail of the indication block diagram automotive system The control of VAZ 2110 is shown below.

Tuning Panel Devices VAZ 2110

The boring and unprecedented factory panel of the VAZ 2110 instruments is rapidly bored, and it is not necessary to purchase an alternative, equipped with a computer, I don't want to lay out a lot of money. The process of refinement "panels" is a popular topic. One of the most simple options Is the purchase of a special lining. Today find it will not be a problem.

To install it, you must remove the entire instrument panel. Next, you should neatly pull out the arrows from it. By installing the arrows to their places, you need to make sure that nothing interferes with the movement of transport and does not distract the driver, otherwise, you should still disassemble everything. Properly selected, beautiful and stylish pad in harmoniously fit into the overall salon atmosphere and perfectly complement his entire design.

Also today is not at all the problem to make the instrument panel with your own hands. We only need to have required Material and "wagon" wish. The easiest option is to make tuning "tidy" in several stages. First, of course, it is necessary to remove it. The incandescent lamps should be swapped on LEDs. It should be installed in the same cartridges. There are several ways to change her color:

Change the color of a single one. If you clean the single-meter from glue using a knife, turn over and put back, then the backlight of the dial becomes from green into blue;

Backlighting the instrument panel VAZ 2110. We change the color using the LED tape. To begin with, you must scrape a layer of color filter. If something is left, you can erase with a solvent. Next should be green LED tape fasten inside the "tidy". You need to connect it directly to the bulb cartridge. If you remove the red paint from the arrows, and then paint it with a white varnish, which is used to apply to the nails, you can get a bright green backlight "tidy";

Automatic illumination change. The change of seven different colors is due to the use managing car Electronics.

Repair of dashboard

Do not know how to remove the instrument panel VAZ 2110? For this you need to do the following steps:

• from the terminal "minus" the battery must be disconnected;
• replete screws and remove the shield;
• remove the fastening screws that the device combination is attached to the lining and pulling on themselves, you should remove the instrument combination of the socket;
• you should disconnect from the "tidy" block of wires.

Installation must be performed in the order, strictly reverse the removal process. For disassembly, the mounting screws should be renewed and disconnected from the body of the instrument combination mask with glass. You need to unscrew the screws and nuts of the fastening of the pointer and remove them from the housing. The assembly is performed in reverse order.

There is also a modern way to stylize own car According to the 21st century trends. When the old "panel" bothers a bit, comes to buy and install a newer euro panel, which looks very exquisite and beautiful. Many will agree that the car will then become much more solid.

The only disadvantage is such a nuance: to remove the old instrument panel, you must remove the lining. As a result, at the assembly stage it is better to replace the light bulbs that are at significantly better (Philips, OSRAM and others). This will help forget about their replacement for a long period. You will definitely find more useful informationreading our other articles.