Home Salon What is an excavator? Review and technical characteristics of excavators. Wheel Excavator Market Overview

What is an excavator? Review and technical characteristics of excavators. Wheel Excavator Market Overview

From ancient times, people were engaged in earthworks. Modern volumes of such procedures are simply colossal (construction, career, roads). Manually do all processes simply unreal and too long. Special technique comes to the rescue. Consider further what excavator is and what is his role in the industrial farm.

Introduction

Mechanization the process of developing land tried more than five hundred years ago Leonardo and many more scientists. Modern machines differ in many parameters, depending on the modification and direct purpose. The main classification is carried out according to the following parameters:

  • Type of running part (wheels, caterpillars, railway running and so on).
  • Operational features (for construction, quarries, mines and the like).
  • Power ungregate.
  • According to the principle of action.

All these indicators can be combined in various variations, therefore a tremendous number of modifications under consideration are developed.

Crawler

What is an excavator on caterpillars? This is a machine that will pass on roads with any coating, as well as without it. The overwhelming majority of self-propelled excavator equipment is placed on the base with a crawler. The exceptions are analogues operating in the city. The models under consideration easily overcome loose soil, peatlands, off-road, forest and stone obstacles.

Other types of chassis

Excavators on pneumatic wheels have greatly proven themselves to work in urban conditions. Crawler analogs are not suitable here because they will simply destroy asphalt coating. Wheel models are not only gentle related to road design, but also perfectly imputed, and also have a minimum noise level.

What is a stepping type excavator? Such a modification is devoid of caterpillars or wheels. At the bottom of the unit is the support plate, which serves as a platform when working. Machine is moved using special hydraulic shoes. She rises to them, transfers itself and again falls on the support plate. Speed \u200b\u200bmode Movement can be up to 80 km / h.

Excavators on the rail move are usually operated in mining workings. Chain models are placed on rails widely located. This distance is called the portal, it is convenient to call for loading trucks into it.

Earthwall universal devices can be mounted almost on any chassis. Combined modifications can be equipped with wheels and rails lowered pairs, if necessary, movement on rails. There are floating analogs (dredgers).

Operating principle

Single-line variations work in cyclic mode: scored - transferred - poured. Continuous fixtures include rotary and trench excavators. To the first models, units with multiple buckets are counted, which are fixed on a large rotating wheel. As an example of a trench analogue, light units for laying the cable can be brought. Domesticities are gaining sand under water by vacuum-suction principle.

It is impossible to determine one optimal and universal way of work. It all depends on the type of material produced and environmental conditions. In each case, a specific type of equipment is required.

Features

Excavator overview will continue wheeled models for construction. Despite the fact that tracked modifications are leading in the field of soil development, for construction sites optimal option Wheel aggregates. They are more mobile, more speed, do not spoil asphalt and are promptly transferred from one to another object.

Shaft excavators have compact dimensions, which is relevant in closed spaces. As a rule, they are used in horizontal workings underground and in tunnels for shipment of rocks.

An open career is operated by modifications that can provide maximum movement and loading material. There are several types of machines in such works. The main requirement for them is that the excavator bucket is as compatible as possible. Among the career models:

  • Draglains. The design of these aggregates does not provide for a rigid bucket with an arrow. The scoop is held with the chain, the analogue of which pulls up or lowers it.
  • Tracked high passability.
  • Hydraulic versions with the ability to enhance the pressure impact on the breed. Usually apply on overcurrent work.
  • Modifications rotor typeproviding maximum full use of minerals.

Power plants

The study of the technical characteristics of the excavator will continue in part of the engines. The first machines worked from the steam engine, then removal, gasoline and electric motors came to replace them. Most popular force aggregates Diesel are considered and due to their economy.

The diesel version is mobility. This technique allows a lot to move along the object being processed and beyond. If the process involves moving on small distancesIt is reasonable to use an electrical analogue. For career workings, this technique is suitable.

The development of light excavators that feed on rechargeable batteries. In this case, the machine is controlled by the operator remotely or in the traditional way.

Application

What is an excavator and why is it needed? First of all, the technique under consideration is an excavation machine, the main task of which is the excavation, the transfer of the soil and rock. At the same time, excavators can work not only on sites where there are, but also in areas, the level is lower or higher. In addition, the material can be mined without problems from under the layer of water.

The resulting breed of equipment loads into transport units (machines, barges, wagons). If necessary, the ground can be squeezed into the dump. The hydraulic excavator allows you to quickly and efficiently provide digging channels, trenches, butt, clearing the territory with maximum accuracy. The cars under consideration made it possible to fully mechanize earthworks, facilitating the essential labor of people. The ordinary construction model is capable of transferring up to 4 cubes of the Earth or sand for one approach.

The biggest excavators

The most in the category under consideration has impressive dimensions. The giant was developed and assembled by the German company THYSSEN Krupp Fordertechnik in 1978. The technique was gathered for 5 years, its cost exceeded 100 million euros. "Monster" worries so far in the coal section of the Hambaha.

The machine is functioning about 20 hours a day, performance - 240,000 cubic meters. m coal. Such volumes are quite difficult to load and remove, but this is not required. Such large excavators are required to extend the mass in which more than half of the material is an unsuitable breed. Giant dimensions: Length / Width / Height - 240/46/96 m. Weight - 13.5 thousand tons. The length of the arrows is 200 m. The volume of each bucket is 6.6 cubic meters. m.

Hitachi Excavator

Below are given technical specifications One of the most productive excavators - "Hitachi ZX200":

  • Length / width / height - 8.94 / 2.86 / 2.95.
  • Weight - 19.8 tons.
  • Base wheel - 3.37 m.
  • Clearance - 45 cm.
  • Pressure on the soil - 0.47 kg / sq. M. cm.
  • Development depth - 6.05 m.
  • Excavator bucket volume - 0.51 cubic meters. m.
  • Terminal force - 203 kN.

Silence unit "Hitachi ZX200"

The technique is equipped with a four-stroke diesel engine with 4 cylinders. Motor has a direct fuel injection, camshaft In the upper placement and cooling of water type. New excavators of this modification are equipped with power installationwhich aggregates with modern system HIOS III hydraulics, providing the ability to program manual and automatic operation. In addition, this unit makes it possible to maximize the use of hydraulic pressure, increasing the production of the cost-effective consumption of fuel.

Main engine parameters:

  • Volume work - 5.19 liters.
  • The power is the nominal - 166 horsepower.
  • Torque maximum - 550 nm.
  • The size of the cylinder in diameter is 105 mm.

Device

Equipped with an arrow (length - 5.68 m) and handle with increased traction force and turning point (2.91 m). Designers upgraded the movement control, resulting in the engine speed in automatic mode during maneuvers or on the rise when an increased traction force is required.

The dimensions of the brackets on the upper supporting rims are increased. This positively affects the working resource of the node. Additional rigidity to the unit gives a modified configuration and increasing tracks. In addition, the box of the box cross section and the central beam of the X-shaped type are increased. The whole complex of improvements added almost 35% to the strength. The plates of the X-shaped beam are made in the form of monolithic elements, which made it possible to significantly strengthen the central part of the frame.

Outcome

Modernization and constructive improvement of excavators is aware of continuous mode. Designers continue to achieve improved quality of work, which is due to the growth in the volume of construction and mining.

Excavator speed on wheel fashion It can reach 35 km / h (and if it is attached to the truck, even more), which is about 8 times higher than the speed of the tracked machine. Shoes in the tires of the wheels do not apply almost no damage road covering. Therefore, these cars are trying to use in those places where the tracked car is ordered, for example, within the city.

In this sense, any movement of the caterpillar excavator along the roadway leads to the formation of dents and cracks, and work on the territory of the park or recreation zone turns this zone into the mash, while low pressure on the soil in pneumatic tire allows the wheelchair freely move on soft or paved surfaces without prejudice to the coating.

Wheel excavators Builders prefer to acquire or lease, of course, provided that the maximum high permeability and lifting capacity will not need, but it will be necessary enough high power Special machinery. At the same time, "Kolesniks" capable of working on the soils to the IV category are inclusive, are often used on very serious excavator work - when the soil is drawn up and obtaining the desired slope when creating a basis for the future construction site or during the preparation of a pit for laying the foundation. For such work, except power requires accuracy when moving the soil, very good handling and circular visibility - all these qualities, modern full-turn wheeled excavators just possess. But, in addition, they are very convenient when working in cramped conditions and are generally universal, as they can be used to remove asphalt, cleaning cuvettes, digging trenches for laying communications, moving the construction trash, planning under the base and clearing platforms by bulldozer, use in quality of the lifting mechanism. These machines, in addition to the obligatory bucket ("reverse shovel") and a bulldozer dump, are equipped with a wide variety of tools: a "direct shovel" bucket, a hydraulic hammer, hydronic, grab, a ripper, etc. With the help of an excavator, you can even drill well under the poles.

Manufacturers of wheeled excavators

Wheel excavators russian production Basically represented by Tver Twex and Eksmash plants. Tverskaya Excavator (TVECs) is included in the company "RM-Tereks" (is a joint venture of the Russian Holding "Russian cars" and the global manufacturer Terex Corporation). Here release wheel Excavators TVEX Series The operational mass of 14.4 tons and 17.6 tons and the EC operational mass of 14.9, 18.0 and 20.2 tons. TVEX cars - the new product of the company with a comfortable modern cabin, the engine of the Minsk motor factory D-245 with a capacity of 122 liters. from. (Tier II), Zahnradfabrik bridges and transmission, Bosch-Rexroth hydraulic equipment components, Poclain turning mechanism.

Plant "ExMash" produces two models of pneumatic full-time excavators with an operational mass of 13.2 and 16.2 tons. The machines are equipped with an economical turbocharged engine Deutz with a capacity of 91 hp, drive bridges and gearbox production of Germany, hydraulics produced by Bosch Rexroth. The hydraulic system, made according to the LUDV scheme of the Bosch Rexroth company, provides an unlimited number of combinations in the working cycle. Power distribution of the main LS pump between executive mechanisms It occurs with the priority of the rotary mechanism to reduce the time of the working cycle. The feature of the excavators is not analogue in the world, a capotic system with a horizontal counterweight. In 2013, the plant increased the warranty for excavators to two years or 1500 m / h, and the maintenance interval rose to 500 m / h.

A significant proportion of imports in Russia of wheeled excavators is now constituted hyundai cars (Operational mass of 5.5 - 20.5 tons) - more than 30%, Doosan (5.6-20.8 tons) - 20% and Caterpillar (14.0 - 22.5 T) - more than 10%. Also in our market are well represented wheel excavators CASE (10.0 - 22.7 tons), Hitachi (16.5 - 21.1 tons), JCB (12.7 - 21.4 T), Komatsu (14.2 - 22.3 tons), Liebherr ( 18 - 21 tons), Volvo (12.8 - 20.1 tons). The company "RM-Tereks" offers compact TEREX wheel excavators of the TW series of 6.8-11.0 tons.

Constructive features of wheeled excavators

Somedokshova hydraulic excavators have a long-standing design, which is nevertheless constantly being improved. Hydraulic systemwhich performs the functions of the power actuator and managing the working bodies, in modern excavators is equipped with an adjustable performance depending on the load. This reduces the duration of the working cycles, increases the effort on the bucket and handle.

So, U. hyundai excavators The CAPO automated system is used, which controls the hydraulic system and adjusts its parameters to obtain maximum parameters Performance. On the excavators JCB. The improved intelligent AMS control system is installed standard - it controls all the basic functions of the machine to ensure maximum performance and fuel efficiency. Doosan excavators are also equipped with a new hydraulic system controlled with the engine with the engine electronic control E-EPOS to obtain optimal power and fuel economy. Komatsu excavators Equipped with an exclusive onboard Hydraumind system, which makes it easy to perform all operations, providing elevated performance features cars. The Liebherr LSC excavators hydraulic system ensures the coordinated operation of the engine and hydraulics, allowing simultaneously saving fuel and rationally use the pressure of 350 bar.

The excavators are set pretty powerful four or more often six-cylinder diesel engines with liquid cooling, turbocharged, direct fuel injection using the battery injection system COMMON RAIL. Or systems of individual pumps with high injection pressure - up to 2000 bar. Such diesel engines have a high torque at low revs. crankshaftWhat is just required for the efficient operation of the excavator. Moreover, modern motors Comply with the tight standards of exhaust gas toxicity - American EPA Tier 3 and European EU Stage IIIa. For example, for engines with a capacity of 75 to 130 kW emissions with exhaust gases of carbon oxides according to Stage IIIa, should not exceed 5 g / (kWh), nitrogen oxides and hydrocarbons - 4 g / (kWh), and solid particles, then There are soot, - 0.3 g / (kWh). These standards correspond, for example, all Caterpillar turbodiesels, made using ACERT technology, all Volvo engines created using the technology of organizing the combustion process V-ACT, all new KOMATSU engines with Ecot3 designation, Liebherr engines of own production D 934 S.

Transmission is installed directly on rear axle To get the maximum road Suit, as well as to protect it with a powerful bridge from those flying from under the wheels of stones. Front axle Perform swinging, with a swing angle to 10 °, while the automatic locking of the cylinder of the bridge swing is applied, or it is performed from the operator's cab. Transmission by modern machines Fully supplied automatic box Transmissions switched under load. The standard uses permanent drive on all wheels. On modern machines, bridges are equipped with non-servant disk brakes with hydraulic drive.

The drive mechanism of the platform rotation is carried out by a separate adjustable piston hydraulic pump and an unregulated piston hydraulic motor. A separate pump means that the hydraulic drive circuit is closed, that is, no power reduction occurs when other hydraulic devices are connected. Arm beams and handles have a box cross section. A number of different arrows and several arms of different length are proposed. Arrows can be both monoblock and two-section. The boom hydraulic cylinders, handles and bucket to mitigate shocks are equipped with damper devices (hydraulic plates). The device is used everywhere to quickly shift attachments so that it is possible to install hydraulic hammer instead of the bucket instead of the bucket, etc. In this case, the machine is equipped with a separate hydraulic circuit.

To improve stability and reduce the load on the support surface on both excavators bridges, dual wheels are installed. For greater stability during the operation of the excavator, the role of support, as is known, performs a bulldozer dump, and on the opposite side of the car, independent remote supports (outriggers) are lowered with swivel shoes. Dumps and remote supports are now interchangeable, so that the outriggers can easily be installed in front and behind.

The cabin has a thick-walled tubular frame. Fastening to the frame - through rubber supports for breeding vibrations. Multilayer shockproof glasses are attached in the openings of the cab panel without frames, which increases the overview. Windshield is performed divided. Steps and platforms are covered with perforated steel plates so that the operator does not slip. In addition, in the zone of the heads of the bolts, they are recessed so that the operator does not stumble about them. Of course, the cabin must meet the requirements of the ROPS system. At the request of the customer, some manufacturers produce machines with a hydraulically raised cab - it is necessary to increase the survey of the operator, for example, when unloading high wagons.

Operator seat is equipped pneumatic suspensionwhich automatically adjusts to the mass of the operator. Adjusts the settings of the seat, armrest, consoles. The right console establishes frequently used arrow controls, handle and buckets, on the left - control bodies and remote consoles. In order to increase the free space on the floor, a two-way pedal of controlling and circuits of work equipment is used. The high-pressure working circuit control pedal is fixed in a non-working position. For ease of informing an operator about the operation of the machine, a color monitor or a multifunctional display with the menu system and the programmable shortcut keys of some of the most required functions are applied. Under the order is installed by the rear view camera. In the cockpit is maintained overpressure. A climate installation is used, which includes the heater and air conditioning. Distribution warm air Cabin takes place with blowing all window openings. Cabin noise insulation is at a high level, so you can install a good music center. Noise level in the cockpit does not exceed 72 dB (A). Reducing the level of noise and vibration is ensured largely due to the flexible fixing of the cabin to the frame. By the way, for the implementation of Directive 2000/14 / EC, designers work on a decrease in the outdoor level of noise, reducing it to 98-100 dB (a).

Many firms to track the work of the techniques in order to save fuel and reduce expenditures for operation began to actively use navigation systems. Hyundai excavators, for example, a Hi-Mate remote control system is installed, which functions using GPS navigation. VOLVO, CareTrack branded telemetra, is used as standard equipment - this equipment is included in standard complete set Most new large-sized models of this company. Liebherr serially applies Lidat on machines. The machine is equipped with a built-in GPS, modem and antenna receiver. With this equipment, the data comes from the machine to the central database through mobile network GPRS / GSM or satellite communications. In addition, the GPS network serves to determine the accurate location of the machine. The CareTrack connected system transmits the operational reports of the machine, about the daily operation in machine commodities, about the timing maintenance, On fuel consumption. By the way, fuel consumption is determined by again the branded "Volvovsky" on-board diagnostic computer MATRIS, which is able to provide a detailed analysis of the entire history of the machine.

Modern excavators have a high ability to reuterization, which is very important for protection ambient. Volvo machines it reaches a record 95%. This company is generally famous for the ecology - paintwork coverage of external parts in Volvo excavators does not contain lead.

A very timely decision in the struggle for the ecology was accepted by Caterpillar, starting to apply biodegradable hydraulic oilthat is unlike mineral oils Fully decomposes with microorganisms in soil and water.

In 2012, Caterpillar presented an updated line of wheel excavators of the 300th series, created specifically for the CIS market.

Flagship updated Series Became wheel excavator Cat M318D. In the basic configuration, in addition to traditional options, such as a hydraulic hammer and a device for quickly changing attachments, CAT M318D may have a unique SMARTBoom system. It allows when using a hydraulic woman to translate the boom and handle into the "floating" position in order to reduce the load on the hydraulic and equipment.

All excavators of the updated line are equipped with default by the Caterpillar Product Link system that remotely informs the client about the basic parameters of the excavator.

Separately, I would like to say about the automatic retainer of the transport position of the turning platform. With the help of the pedal in the cockpit, the operator fixes the platform and can start moving without leaving the cab.

Among the changes in the design can also be noted:

  • increased area of \u200b\u200bdump-support for greater stability of the car in cramped urban environments, when there is no possibility to take advantage of remote supports (legs);
  • the new monitor and the control panel, on which all switches are grouped under the right hand of the operator, which greatly simplifies work;
  • new pressure, temperature and new drainage valve in the hydraulic tank for greater reliability of the machine.

But the versatility of the wheeled vehicles, inferior to this indicator only to loader excavators, has its limits. Wheel excavators unambiguously leave the tracked machines on unstable soils. In addition, the presence of a wheel chassis implies serious load limits on the axis than, in fact, the fact that there is no "kolester" with a production mass of more than 30 tons.

Nevertheless, universality is often much more valuable quality than power. It has proven excavators-forkliers that are now more in demand. Statistics russian market Excavator equipment shows that the loader excavators use the greatest demand: for the first half of 2013, about 4,000 units sold in Russia, while the wheeled excavators are just over 1000 units, and medium hydraulic (tracked) excavators of the operational mass. 20 to 33 tons - about 2000 units.

It seems that building and road organizations, reflecting on the dilemma: to purchase a new wheel excavator or an excavator loader, which in some cases will save on the front loader, choose the second. Although the builders, of course, understand that, acquiring a more universal excavator loader, they receive a weak and moreover an incomplete excavator, which is not able to cope with any large-scale task, when needed, for example, transfer a large ground for very a short time. The fact is that the loader excavators and wheel excavators are in different weight categories: the first occupy a niche to 12 tons, the second - up to 27 tons.

The reason for the popularity of excess loaders More is associated with a general tendency of mechanization growth in construction sites, when developers with the help of this technique begin to actively deprive the operation of unqualified workers with a shovel. Wheel excavators on this wave does not become much more - heavy equipment and unskilled labor does not intersect if, of course, not counting the distant times of the first five years. However, some increase in competition in the market of earthmoving vehicles in itself is not bad - all this leads to the emergence of more advanced technology.

The increase in the number of owners of land plots caused demand for various mechanisms that can work on a relatively small space. Use ordinary, overall machines is quite difficult, and in some cases it is inappropriate. This is caused not only by the highest cost of services (or lease of equipment), but also a number of other reasons - the impossibility of an entrance to the place of work without additional training, restriction in maneuverability, the risk of damage to plantations and the like.

The industry has established the release of many images of the "mini" category, mainly intended for the private sector, although they are no less attractive for urban services, small farms or specialized small business structures. But if such aggregates, like a cultivator, a snow blower of small sizes is already not new for anyone, then about mini excavators domestic production Heard few. But if you deal with their functionality and multiplicity in use, they will cause genuine interest among most "private traders".

Application (basic options)

Mini-excavators - versatile cars, but readers, as a rule, are more concerned about the issues of domestic use of technology. On this and make an emphasis.

Excavation. The types of work with which you have to face the owner of the hectare, most different - preparation of a pit or trench for the foundation (for septic, well, gaskets of engineering communications), holes under the poles (supports) and so on.

Drilling. For example, when arranged with a fence of a fluid from a well.

Alignment of the site. If you got a waste, then this will probably have to do. Difficult relief, and therefore, the perspective to shut down the step landscape attracts little. And for lovers, such exotic mini-excavator will also be a good helper.

Moving cargo. For example, the delivery of a solution from concrete mixer to formwork, export from the site of construction waste or the carved soil - the situation in everyday life when manual labor is inffective, there are quite often.

Dismantling (full or partial) small buildings. This necessity often occurs if the construction is intended for demolition or prepares its reconstruction (alteration) when buying already an obligrant land of land, when new owners do not suit the former layout.

A brief overview of Russian mini excavators

Consider all models presented on the market does not make sense. Causes two.

Firstly , domestic producersUnfortunately, not so much (the consequence of the post-transfers and the collapse of the industry). As for the class "mini", it is even more difficult here. Therefore, almost everything that is on sale - imports, units from the neighbor (Belarus) and far abroad (Germany, China and a number of other countries).

Secondly, even one specific model always produced in various equipmentthat somewhat changes the functionality of the base sample and expands the possibilities for its use.

Therefore, as an example, consider the mass producer of this technique in Russia. This is not an advertisement, and according to the author, today it is the only optimal version of a small-sized excavator, which can be effectively used in the private sector, especially since its price is quite accessible, which cannot be said about foreign models. If you, dear reader, these models will seriously interest, then on the manufacturer's website, find more detailed and expanded information will not be difficult.

"Geogid"

Manufacturer - Machine-building Holding "Partner" (Chelyabinsk).

Model "15G"

In fact, this is not a self-devaluing machine, but a trailer. This option is especially attractive for the owners of small sites (country house, cottage and so on).

The engine (gasoline) on 15 "horses" allows you to dig a trench (pitched) to a depth of 1.5 and lift cargo by 1.8 (m). Linear parameters of the machine - 284 x 125.5 x 238 (cm), weight - 0.75 tons. The booster turns to the left-right to 450.

Basic price - from 275,000 rubles.

Model "20G"

Available in 3-grades (basic, premium, standard). A significant difference lies in the level of control and options for additional snap. Gasoline engine; As can be seen from the designation, on 20 "horses". Machine weight - from 2.2 to 2, 35 tons. Consequently, the impact on the soil is no more than from the usual "car".

The dimensions also comply with the definition of "mini" - 345 x 155 x 353 cm (rounded values). The volume of the bucket is from 0.4 to 0.5 m3, width - 30 cm. Such an excavator can be equipped with a depth of 3 m and lift the cargo by 2.5 - 3.3 m (depending on the modification).

"Premium"

All excavators provide an additional / equipment installation (dump, for example), for which the corresponding hydraulics elements are mounted. Connection is performed within a few minutes.

Price - from 545,000 rubles.

The "20D" modification differs only by the engine. It is more powerful, by 27 hp Accordingly, the price is higher - from 640,000 rubles.

Model "60 DC - P"

Much more powerful; Engine at 60 hp The dimensions and weight are somewhat more - 360 x 126 x 350 and 2.4 tons. The height of the bucket is 330 cm.

Price - from 1,055,000 rubles.

The list is rather modest, but domestic mini-excavators fully provide excavation in the private sector. And if you think about, our cars are preferable. Justifications to this statement are several.

  • First, quite affordable prices.
  • Secondly, reliability. Russian aggregates are designed to meet all the features of our climate, adapted to local conditions. As for imported models, they are more "capricious".
  • Thirdly, problems with zap / part and their delivery, as a rule, does not exist.

Information is enough to understand the feasibility of purchase and determine the optimal version of the mini-excavator.

Exist different kinds Excavators, depending on the principle of operation, the device chassis, destination and other parameters

Types of excavators on the principle of action

Excavators are divided into continuously working (multidimal) and cyclic (single-line).

The first associated with continuous work is used mainly when digging trenches. They are simultaneously cut into the ground, move it and ship into special transport, conveyor or dump.

The second, single-line, interrupt the soil digging at the time of movement. They are used mainly during construction, to perform major earthworks. In the appointment of single-line excavators, in turn, are divided into construction and careers. Career are used in places of development of mineral deposits.

Types of excavators by type of device

Wheel excavators. Based on a car wheel or pneumocole chassis. They are distinguished by mobility, high movement speed, wide use area. This technique is mainly used for work within the city, where there is an opportunity to get to the destination on a relatively good road.

Crawler excavators. Based on caterpillar. They are distinguished increased patency On the terrain inaccessible to the wheeled technology. These are loose sandy soils, off-road, overwhelmed swampy soil, etc. However, they are delivered to the place with the help of special equipment. In terms of sales, for example, tracked models exceed wheels by 15-20%.

Railway excavators Based on the railway platform, floating excavators - on pontoons. The latter are used for clearing water bodies, deepening bottom, sand mining.

The most sought-after types of special equipment and their appointment

Field-turn excavator on a wheeled or caterpillar - Universal view of special equipment used on construction sites. It performs earthworks on the development of the soil, the device of pots, loading bulk materials, leveling platforms, demolition of buildings and structures.

Mini-excavator - solution for cases when big car Not applicable or excessive.

Backhoe loader Performs the trenches, the development of kittlers, the movement of the soil, the loading of construction waste, clearing the territories, preparation of the base of the road for asphalting.

Using additional equipment For excavators makes it possible to expand the functionality of the special equipment. So, the excavator-loader combines the excavation-loading bucket with bulldozer equipment.

Excavators manufacturers

Dear, but very powerful and extremely reliable JCB, Caterpillar and Liebherr excavators are in demand on the primary market and retain their high cost when subsequent resale. Terex, Komatsu, Hyundai, Hydrema, Hidromek, Volvo, Case, John Deere, New Holland, Hitachi, Exmash are also considerably popular. Inexpensive Chinese technician Yuchai, Xcmg, Sunward, Liugon also in demand.

How much is the excavator?

  • DEM-310 excavator loader with both bridges produced by the Italian company Carraro and the Motor Perkins 1104D-44T per 100 hp costs 2,170,000 rubles.
  • China Liugong Excavator Model with 92.5 L.S. and fully drive There is a price of 2 250,000 rubles.
  • EO2626 wheel excavator, which is made on the basis of the tractor Belarus, are estimated at 990,000 rubles, and the tracked model EO3223 with an increased support surface and engine capacity of 100 hp costs 3,000,000 rubles.
  • Japanese Crawler Compact Excavator KUBOTA KX1213G with a diesel engine capacity of 40 hp costs 2,120,000 rubles.
  • The Kubota KX080AC model already has a motor power of 65 hp, but it costs 3,700,000 rubles.
  • Chinese Wheel Excavator XCMG WZ30-25 with a capacity of 88 hp has a price of 2,010,000 rubles.

Any construction, and even more so the laying of the pipeline is unthinkable without the use of the excavator. Since the day, earthworks began to be made, the construction thought worked in the direction of increasing the productivity of this process.

More Leonardo to Vinci made the first drawings of the Draghunca Draghling. In 1776, a steam drive was applied, created with the participation of James Watt. In 1809, the first floating excavator was built in St. Petersburg, and in 1812 the idea was implemented at the Izhora factory, it was the first multiflower excavator. In the second half of the 20th century, new engineering technologies and equipment (hydraulic engine, etc.) were actively introduced.

The production of excavators in our country begins in the 1930s, among the first there was a factory in Ivanovo, working under the brand of Kranceks. Now in Russia there are several dozen enterprises collecting excavators of various purposes.

The most common excavators are engaged in digging soil and loading bulk materials. To accommodate such excavators to the largest number of tasks, it is possible to change attachments. So, modern excavatorUsing additional equipment can also be used for loosening of particularly solid soils and to dismantle the structures of different strength. In order to ensure maneuverability and multifunctionality, single-sized excavators are used, but in conditions when you need the greatest productivity, multi-loving excavators are used. As a rule, they are designed for stationary conditions, for example, to work in careers.

Multifungal excavator

Depending on the working conditions, different types of running part are used. Traditional tracked and car chassis in special conditions replace floating, rail and walking, and also use combination different types chassis.

Excavator on a walking chassis

In addition to widespread excavators models in separate areas of industry, there is a need to create specific machines. For example, underground excavators used for underground mining of minerals with high density of rocks or tunnels used for loading blemied rocks.


Underground excavator

Permanent criteria for improving excavators is the reduction of energy consumption on one side, and on the other hand, an increase in power and performance. There is also a search for opportunities to create more versatile machines.

Russian engineering today has considerable experience in the construction of earthmoving machines. Leading enterprises try to create samples competitive in the global market. Often these tasks are solved by completing imported systems, which ultimately leads to the rise in the cost of operation of equipment, but also implemented and completely domestic modern engineering solutions. For example, a trainer company since 2006 produces an EK 450 FS model with a bucket of a straight shovel type.

Bucket straight shovel

In comparison with the usual bucket, the "straight shovel" allows the excavator to produce work, which is usually carried out by three different units of construction equipment - "classic" excavator, frontal loader and, under certain conditions, a bulldozer.

Currently, due to a possible ban on the import of modern construction equipment, many Russian enterprises have taken a course on the production of domestic products that are not inferior in their characteristics of foreign production. Time will tell whether our manufacturers are ready for import substitution, whether they are ready to more actively conquer the internal and export markets, in the conditions of the low course of the ruble - these are questions for which we will know the answers in the near future, because it's no secret that I would like to buy the technique of Russian manufacturers , just being confident that this is the best choice.

New on the site

>

Most popular