Liquid gur kia rio Designed for pump hydraulic power steering. I apologize for the tautology, but without it in any way. In other words, the fluid is designed to transfer mechanical energy from the pump to the steering rake. You start rotating the steering wheel in some direction, the pump GOR picks up the signal and creates pressure in a certain direction, which is transmitted to steering rack And further to the steering traction. And the steering thrust is already responsible for the rotation of the wheels themselves. Thus, the rotation of the steering wheel becomes very easy.
Liquid gur kia rio, like all other oils in the car, has its own properties that will deteriorate over time. Although the manufacturer himself assures that the oil in the GUR KIA Rio does not need to be replaced and flooded for the entire service life. Personally, I do not believe in miracles, because I believe that the liquid for the hydraulic helper of the Kia Rio steering wheel requires periodic replacement. It is important not only in a timely manner, but also to choose it. For most cars in the GUR system, the same oil is poured as in the automatic transmission. This is a completely common procedure, since after replacing the oil in the automatic transmission, there are almost always surplus. This is enough to replace the oil in the GUR. Liquid for automatic boxes It is very similar in its composition with the liquid of the hydraulic power steering. Yes, and the principle of operation of the GUR is quite simple and is not demanding for some fantastic oil properties. However, we are not a garage car service, but an authoritative resource, so in this article we will adhere to only the official recommendation of the automaker.
Liquid gur kia rio | Kia Rio.
Liquid into the hydraulic power steering wheel Kia Rio Must meet the PSF-3 or PSF-4 standard. This information is on the hydraulic tank cover or in service literature. The manufacturer does not matter, it is only important for compliance with these standards. First and second generation Kia. Rio is recommended to use the PSF-3 liquid, and in the third - PSF-4. Both fluids can be mixed with each other without loss of qualities. However, it is recommended to use only one liquid to be used.
For full replacement liquid gur kia rio It will be required about 0.7 - 0.8 liters.
What oil in gur kia rio use is to solve only you. There are both original liquids and duplicates. For all the time of ownership different carsI concluded that analogues in its properties and qualities are absolutely not inferior to the original. But this is everyone. We will look at the original liquid from the Korean Mobis manufacturer.
Hyundai PSF-3 80W 1l Art. 03100-00100
Canister looks like this:
The average price for 2015 is 500-600 rubles. Liquid has red. It is made only in Korea.
Hyundai New PSF-4 80W 1l Art. 03100-00130
Looks like this:
Middle price tag for mid 2015 - 1100-1200 rubles per canister. This liquid It has light green. Manufacturer country: Korea.
In addition, there are also analogues original liquids. What to fill up - decide already yourself. And the choice of fluid GUR Kia Rio is over. Thanks for attention. To new meetings!
Do not forget to leave comments!
Hello. We will replace the fluid of the GUR at Kia Rio Third Generation.
A helper will be required to perform an easy operation. Son or daughter will suit. The following tools are needed for work:
- syringe with tube
- tara for waste liquid
- passatii
- jack
- rag
- petrol
I advise liquid to fill only the original. Article for purchase: 03100-00110.
The liquid on the specified article is the specification PSF-3.. The bottle is one liter in volume. For replacement, two liters are needed with flushing.
Step-by-step substitution
1. Remove the cover expansion tank Hydraulic steering wheel.
2. Using the syringe and tube, pump all the liquid from the tank.
3. Squeeze the clamp and remove the reversal pipe. After removing the nozzle, oil will go, so pre-substitute the container for oil under the nozzle.
4. Squeeze the plastic lock and remove the tank of the power steering.
5. Squeeze the clamp and remove the feed pipe. It is located below and it is thicker than the nozzle of the return.
6. At the bottom of the tank, garbage accumulates, rinse it with gasoline.
7. Now we need to remove the spent fluid from the system. We substitute under the metal tube, the container containers and grind the steering wheel left to the right until it stops. We turn until the fluid cease to go out.
8. Install the tank on the body.
9. We connect the feed and returns to the tank. Only the nozzle of the returns do not connect in that place where its metal part has gone. The hole with the wedge with the wedge hole in the rubber part of the reversal pipe that goes to the tank.
Wedge can be made of wood or rubber.
10. Subdominating the front of the car to the steering wheel easily rotate.
11. Pour fluid to the tank and the assistant twists the steering wheel left to the right. Fill until it goes out of the metal tube inverse light liquid.
12. Wear a plugged pipe and fix the clamp.
13. Tightened the steering wheel and look behind the liquid in the tank, periodically fill. Told the level of fluid in the tank will not leave.
14. We start the engine and again grind the steering wheel. The liquid in the tank can foam, do not be scared, it turns out. Top while the level is not leveled.
15. Take a liquid in terms of the level indicated on the tank and the work is completed.
New Porsche Cayenne. Appeared in 2005. Then car B. maximum configuration accelerated until the first hundred for 5.2 seconds. This car has become a real discoverer of the SUV segment.
Now many automakers seek to have at least one SUV in their model range, and they are focused on Cayenne. The third generation of the brand debuted in 2018. And one of the brightest versions is Cayenne S, which is equipped with a turbo engine, with a capacity of 440 hp. But this luxury SUV has a weak side.
In such a version, the price of German sports car It is 7.8 million rubles. And it is not suiced even for a premium brand. But in essence, this Porsche combines the permeability of the SUV, the dynamics and controllability of sports car, the capacity of the station wagon. And what if you buy cars for the same money simpler, but more narrow-controlled?
BMW 2-Series. it sports coupe It has small sizes and a three-liter turbo engine, with a capacity of 340 hp Such a car may not have a high road SuitBut it has decent dynamics and handling. And he is faster than Porsche Cayenne in overclocking up to 100 km / h. At the same time, a well-equipped car costs about 2.7 million rubles. And it is essentially cheaper than German SUV. So it remains to still choose cars in the amount of 5.1 million rubles.
In the steering power steering Rio III. 2012 G.V. Zalita branded fluid PSF-4 green, which can not be interfered with any other liquid, so when replacing be careful. The procedure of shift (displacement) of the hydraulic oil is quite simple, and it can cope with it literally any car owner even alone. In order not to have any difficulties, we suggest seeing visual video about the replacement of liquid Gur Rio 3rd generation.
The required volume in the Kia Rio GUR system is 0.8 liters. oil PSF. The corresponding PSF-3 or PSF-4 specification.
How to replace hydraulic oil in Gura Kia Rio III
Brief process of replacing hydrolysis car Kia. will include such actions:
- pump off the tank with a syringe as much as possible;
- add to full;
- remove from the Tank Floor Hose and send it to another empty packaging; grind the steering wheel there, from the end to the end while the liquid does not fall to the minimum level, then replacing and repeating the actions again;
- how from the return will go fresh, the process can be completed;
- we check the level in the tank to be at the maximum and now turn on the ignition so that the pump is injected itself.
More clearly, how to change the liquid itself in the Gure Kia Rio 3 do it yourself, see the video.
When to change the oil in the Rio hydraulicel 3
The manufacturer claims that the liquid filled from the factory is designed for the entire service life, but experts recommend changing every 3 years or regulated by such signs of the loss of oil properties as:
- noise when the pump GUR,
- increase the effort applied when turning the steering
- the smell of Gary from the barrel of liquid GUR,
- changing the oil color.
Hydraulic power steering (GUR), as a car mechanism, is responsible for the operation of the steering wheel. Its function includes the possibility of smooth turn when moving, absorb dynamic blows from the irregularities of the road and storing nodes from corrosion. In other words, the movement without a hydraulic agent is possible, but the power spent on the control will increase repeatedly. Timely replacement The corresponding fluid is the security issue. Without a smooth steering wheel, it is impossible to quickly respond to evasion from obstacles on the road. How to change oil in GUR, read more details.
Replacement process
Replacing fluid in the steering hydrauloveel on Kia is carried out own forces, without referring to specialists. Car Kia. Rio no need to raise on lifting mechanismThe whole procedure is performed on a flat area without inclination.
The frequency of replacement of the hydraulic steering fluid in KIA is about 2-3 years, regardless of the distance traveled.
There are two ways to replace fluid in GUR:
- partial;
- full.
For partial replacement, part of the spent oil merges (in case the car is not over 10 years old, there were no leaks in the GUR system). With a complete replacement, the system of the hydraulic power system is cleaned. Replacing the lubricant is better after complete cleaning - to avoid mixing different types.
List of necessary tools
To replace the oil in the Rio hydrauloveel, the following will be needed. instruments:
- Simple syringe (it is possible to use culinary or medical - the main thing is that the volume of the vacuum can roll out the liquid);
- Screwdriver;
- Hose.
The system has a closed cycle, so the disassembly of the GUR to replace the oil is not provided.
Drain of spoiled oil from the steering wheel
To replace fluid in the hydraulic tape of the Kia Rio steering wheel, it is pre-performing a drainage of spent oil. The procedure is performed in the following sequence:
- We find the drain tank of the hydraulic agent. Kia Rio is located at the shock absorber rack.
- Plum lubricant can be carried out only with simultaneous replacement to a new one - in order to avoid air from entering the fluid supply tube;
- We unscrew the hose leading from the GUR system, which is called yield, with a diameter less than the hose supplying oil into the system. For this, the tank is removed from the attachment;
- We screw the hose to dummy, after which under pressure the old lubricant solution must completely exit. We pump out the waste fluid with a vacuum syringe;
- We move the steering wheel to the right and left, for the uniform exit of lubrication from the hydraulic power system.
Do not drain completely spent fluid to the bay of the new one - to avoid oxygen in the system.
How to pour a new liquid into the hydraulicel?
New oil is added to the GUR system in the following sequences:
- In the tank pour new oil;
- Under pressure, lubrication freely penetrates into the system;
- Pour oil, only with a slight residue in the exhaust liquid tube;
- Fill up to the level of "FULL";
- Close hoses - turn on the engine. When Ignoring, the liquid supply pump is automatically turned on into the steering hydraulic power plate. Check the fill level with the engine running.
As a rule, no more than 1 liter is required for the hydraulic system. For model Row Rio - 0.8-0.9 liters, for more large-sized, for example, soreto - about 1.1 liters. It is better to purchase two oil capacities of 1 liter each. To clean the system and replace on new liquid.
Differences of oil change in GUR for other models of Kia
Replacing the fluid in the steering hydraulicel on Kia Rio from other models is not a type of engine, but the material used in the GUR system.
For example, the hydraulic power supply fluid for KIA is recommended by the PSF type manufacturer. This is a semi-synthetic lubricant. Calculated for contact with rubber parts of the GUR, produced on silicone basis. For Kia Sorento The manufacturer recommends a completely different type - Ultra PSF 4, i.e. Oil with a significant addition of mineral substances (greater maintenance of oil fractions). Diesel when using such a lubricant shows a longer life and reliability of the hydraulic system.
For models KIA Spectrum, Kia Cerato and Kia Sportyj. recommended use only semi-synthetic oils, without the content of minerals. Replacing the hydraulic steering fluid in different models Kia. It is carried out without mixing. It is forbidden to concentrate synthetic and semi-synthetic oils.
