Often car enthusiasts ignore the information set out in the manual to the car, violate the shift deadlines of the lubricant material, pour a car that is not suitable for type, class or season. Why it is important to use recommended motor oil for Nissan Qashqai. We will tell in this article.
Taking a selection of engine oil for Nissan Cascaja, it is worth considering the manufacturer's recommendations of the machine. Required information regarding the type, class, viscosity of the car, as well as the timing of its replacement are set forth in the instruction manual vehicle. Special attention It is necessary to pay the viscosity characteristics of lubricating mixtures. Fluids designed for the winter should not be used at very high temperatures overboard cars. Lubricant, designed for the summer, does not withstand too low temperatures and begins to crystallize. All-season oils are a certain alternative between the two previous types of lubricants, but buying all-season should pay attention to the temperature at which the liquid can be used. For example, semi-synthetic cars operate in a smaller temperature range than synthetic. Mineral fluids are recommended to pour into motors with a large mileage.
Recommended motor oil for Nissan Qashqai meets the technical characteristics and constructive features Engine of the specified auto model. According to tolerances, the buyer can understand that motor fluid Suitable for concrete brand Machines, provides normal work and motor protection. If the engine fluid has been tested, for example, on Nissan Casca and satisfied the requirements of the plant's manufacturer, the corresponding tolerances will be present on the canister with oil.
Nissan Qashqai J 10 2006-2013
Characteristics of oil
According to the manual, you need to pour motor oils that meet the following requirements:
- In HR16DE or MR20DE auto motors:
- original motor nissan liquid;
- according to the API - SL or SM standard;
- according to the ILSAC specification, the GF-3 or GF-4 group;
- in accordance with ACEA - A1 / B1, A3 / B3, A3 / B4, A5 / B5, C2 or C3.
- In the power units of K9K EURO 4 without a smbed filter:
- original nissan lubricant;
- For K9K Euro 4 engines with summer filter (For some versions of the car):
- by ACEA - A1-B1 (with parameters corresponding to the group ACEA - B3 / B4);
- For K9K EURO 5 engines with a diesel filter (for some versions of the car):
- according to aCEA classification - C4;
- "Low Saps" (having low ash content).
- For M9R motors without a smbed filter:
- original Nissan engine oil;
- by aCEA standard - B.
- In M9R auto motors with a diesel filter (for some versions of the car):
- nissan branded lubricant;
- according to the ACEA - C4 specification;
- "Low Saps" (having low ash content).
- In R9m motors:
- original Nissan engine oil;
- according to ACEA - C4;
- "Low Saps" (having low ash content).
Filling capacity
Oil viscosity
For diesel engines, the following requirements for oils for viscous characteristics:
- In the power unit, K9K is preferably used SAE 5W - 30. If such an oil is absent, then using the scheme 1 it is necessary to choose the corresponding liquid.
- For M9R motors without a particulate filter, you can only use 5W - 40 or 0W - 40.
- For K9K and M9R engines with a diesel filter (for some versions of the vehicle) or R9M apply only 5W lubricants - 30 groups "Low SAPS". (low-rise).
Scheme 1. Classification of lubricants on viscosity characteristics for gasoline engines or K9k motor without a diesel filter depending on the temperature range of the environment. According to the scheme, you need to use auto:
- 5w - 30 in the temperature range of -30 ° C (and less) to +40 ° C (and higher);
- 10w - 30; 10w - 40; 10w - 50 under -20 ° C to +40 ° C (or more);
- 15w - 40; 15w - 50 in the temperature range of -15 ° C to +40 ° C (or more);
- 20w - 40; 20w - 50 under -10 ° C to +40 ° C (or more).
Nissan Qashqai J 11 since 2013
Characteristics of oil
- For HRA2DDT engines:
- nissan branded motor fluid;
- according to the ACEA - A3 / B4 standard.
- In the MR20DD power units:
- nissan branded engine oil;
- specifications ACEA - A3 / B4
- In K9kvyvigators K9K:
- corporate Lubricant Nissan;
- quality class by ACEA - C4;
- "Low Saps" (low-rise).
- For R9M Automotors:
- original Nissan engine oil;
- quality class by ACEA - C4;
- "Low Saps" (low-rise).
Filling capacity
Oil volume necessary for replacement, with oil filter and without:
Oil viscosity
- For gasoline engines, it is preferable to use 5w - 40. In the absence of said liquid, it is worth choosing oil according to Scheme 2.
- In diesel engines, K9K with a diesel fiber is recommended to use only 5W liquids - 30 "Low SAPS" groups (low-rise).
- For R9M units operating on DT, it is allowed to use only 5W - 30 DPF groups "Low SAPS" (low-rise).
Scheme 2. Classification Automobiles for viscous characteristics for gasoline engines depending on the temperature range of the environment. According to Scheme 2, you can choose the following cars:
- 5w - 30; 5w - 40 at a temperature of -30 ° C (and less) to +40 ° C (and higher);
- 10w - 30; 10w - 40; 10w - 50 in the temperature range of -20 ° C to +40 ° C (or more);
- 15w - 40; 15w - 50 under -15 ° C to +40 ° C (or more);
- 20w - 40; 20w - 50 with temperatures range from -10 ° C to +40 ° C (or more).
Conclusion
Recommended engine oil for Nissan Cascais is selected with reference technical characteristics Power unit. For some models, Nissan Cascais manufacturer it is recommended to use only oils that meet the requirements of DPF "Low SAPS" (low-rise). Selection of cars for petrol engines It is carried out taking into account the temperature beyond the car, the desired fluid can be selected using the schemes 1; 2 set forth in the manual to the car. For most diesel units, more stringent requirements are presented, lubricant is allowed, having a viscosity specified by the plant by the manufacturer of the machine.
Properly selected oil can significantly increase the engine resource, regardless of which climatic conditions have to operate the car.
We select oil into the engine Nissan
The most important characteristics of automotive oil, directly affecting the engine and wear piston groupare:
Viscosity - oil that is optimally balanced by viscosity easily penetrates all the vehicles of the car engine, retains its beneficial properties on the entire temperature range, ranging from cold start on a strong frost and ending with continuous intensive use on high revolutions;
Anti-wear properties - Complex climatic conditions of operation of the Nissan car require an increased ability of motor oil to resist undesirable phenomena that destroys the metal surfaces of the nodes and engine parts. Oil must contain additives that prevent accelerated wear in extreme operating conditions;
Cleansing properties - The oil must have elevated detergents, dispersing and cleansing properties to prevent the engine clogging by combustion and various sediments.
Nissan gasoline engine oil - right choice
Since the cars of the brand Nissan are produced in Japan, and in Europe, the oil for them has a number of differences. For cars produced in Japan, it is recommended to use the following varieties of engine oils:
The greatest popularity of the owners of Nissan cars received engine oil with a viscosity of 5W-40. Synthetic nissan oil Motor Oil 5W-40, which has excellent antioxidant, detergent and dispersing properties, has greatly proven itself when working in difficult operating conditions and during long trips.
Nissan oil for diesel engine - the best choice
Recommended for use in diesel engines the following automotive oil varieties, which relate to the class of mineral all-season:
- Nissan Diesel Oil Turbo x CF-4 / DH-1, having a viscosity of 10W30 - oil for turbocharged Nissan engines.
- Nissan Diesel Oil CD EXTRA SAME X with a viscosity of 10W30 and 5W30 - engine oils for Nissan engines;
For those diesel engines Nissan, on which filters capturing solid and fine particles are recommended for use oil motor Nissan. 10W30 and 10W40, characterized by a reduced level of phosphorus, sulfur and ash content. Nissan oil having a viscosity of 5W30 should be poured into cars, the operation of which runs in regions with a temperate or cold climate.
Original and non-original oils for Nissan engines
Each Nissan car owner should always remember that the development of Nissan oils occurs in parallel with the creation car engines. Thanks to such cooperation and interaction, the maximum matching of engine oil is achieved to all the features of Nissan engines.
The main characteristics and features of the original engine oils of the brand Nissan:
- Original oil allows you to reduce the wear of parts and friction when the engine is started into a strong cold, as it always has a balanced viscosity;
- They make the most effectively lubricate the parts of the engine at high temperatures;
- Increase the motor and guarantee the engine more long term operation;
- Motor oils I. technical fluids Nissan have operating properties, significantly exceeding the requirements of international standards, which makes it possible to recommend them for use in other brands of cars.
Replacing the "native" engine oil Nissan to similar varieties of other manufacturers can significantly reduce the engine resource, cause its premature wear and ahead of time to demand overhaul Piston group. Employees of service centers warn - more than half of all the damasters of the Nissan engines are caused by the use of low-quality automotive oils or its late replacement.
We offer to implement in a hundred carfraud.
Very often, Nissan car owners are concerned about the issues related to the replacement of the oil in the engine and the gearbox. The forums have a lot of information and recommendations on the interval of the replacement, the choice of suitable lubricant and operation. But I would like to notice that the opinions of users are diverged, and it is rather difficult to obtain a reasonable answer from the specialist.
Just in this article you will receive answers to the most frequently asked questions on the replacement of lubricants.
What oil pour into the engine Nissan so that it works like a clock?
I would like to note that motor grease For any model, Nissan must meet the requirements prescribed in the manual. Original oils Have tolerances installed by the manufacturer of the engine manufacturer.
Now the market has a large range of lubricants under different brands. They are distinguished by cost, packaging, viscosity and compliance with API and ACAE standards.
Most car enthusiasts do not know all the designations on the label, and allow a number of errors. Let's look at some of them.
- The viscosity of the oil in SAE determines only its seasonality. No need to be confused with the type of oil.
- By type all lubricants Divide on:
- mineral;
- synthetic;
- semi-synthetic.
- To do right choice It is necessary to view information in the manual and find out which oil recommends filling the engine manufacturer. There are no brand names, but only tolerances and compliance with standards.
Original Lubricants for Nissan meet the requirements of API SL / GF or SM / GF. In accordance with ACAE, lubricating fluids correspond to the class A3 / B4. Also, it is recommended to use synthetic lubricants with a viscosity of 5W30, 5W40, which are excellent all-season motor oils.
The ideal option for price-quality ratio is. 100% replacement of originals, meet all the tolerances and requirements of manufacturers. By purchasing such lubricants, you do not overpay for the inscription on the label, and significantly save with absolutely equal quality. You can order Ookki oils on our website, or by contacting the phone (specify the number).
How is the replacement of oil in the engine of cars Nissan?
This process will look at the example of Nissan Teame. Oil change in this car is similar to other models. The process is quite simple, can cope with any car owner.
First you need to prepare all required tools, new lubricant, oil filter (which changes with the old liquid), empty container. First you need to warm up the car to the operating temperature.
- Next, we unscrew the drain plug in the engine crankcase, but before this it is necessary to remove the protective casing under the engine.
- Gently drain through the exhaust liquid. Within 15-20 minutes, we give her the opportunity to fully drain.
- We unscrew the old filter (can be hand or using a special filler).
- In a new filter, we pour about 300 ml of the new lubricant and twist.
- After that, remove the cork from the filler neck and pour a new oil into the engine. It will take another 4.3 liters (taking into account the whole oil it will be 4.6 liters).
- We close the cork and give the engine to work 10 minutes.
- In the car, Nissan, the volume of oil is tested using the probe. It should be no lower minimum and not higher than the maximum.
A few words about how oil replaced in Nissan X Trail T 31.
One of the popular models of modern auto industry. The process itself does not differ from replacement in the same Nissan Teana. The only thing is the type of oil and its volume. Nissan X Trail is an SUV, respectively, it is necessary to take into account this factor when choosing lubricants. It is recommended to use liquids corresponding to the CF class by the API. Answering the question how much oil in the engine is Nissan X Trail, you need to know which engine type on your car. For example, the MR20DE engine requires 4.4 liters, for QR20DE, you will need only 3.9 liters, and 5.2 liters will enter YD22DTI.
Replacing oil in Nissan Almera and Tiid are similar. Here, the main thing is to choose high-quality liquid and oil filter (it is better to use the original). The procedure is quite simple, can be performed independently. But if you have new car With a guarantee, I spend the replacement only at the stations then.
How to properly replace oil in the gearbox Nissan?
IN normal conditions The operation is recommended to change the liquid after 70 thousand km of mileage to avoid problems with the box. Replacing the oil into the automatic transmission of Nissan is not a difficult procedure that can be held with their own hands, or entrust work to specialists in the car service. The replacement may be partial (when about 60% of fluid changes) and full (up to 100%). The latter is carried out in several stages, since with the usual plum it flows only half the entire lubricant from the box.
I would like to note that the replacement of oil in the box of the car of the Nissan car is practically no different from replacement in a box with a variator. The only difference in transmission fluid. To replace oil in the Nissan variator used original liquid Nissan CVT Fluid NS-2 or its analogues. For automatic transmission, you need to take the original Nissan AT-Matic D Fluid or analogues.
Yokki - advantageous alternative to original liquids
Transmission fluids for automatic transmission and variators under the brand are 100% replacement of originals, have appropriate tolerances for use in Nissan cars. Meet the highest requirements of the API and ILSAC.
Take advantage. Get a free expert advice on all issues of oil replacement in your Nissan model.
Renault Nissan Concern cars are distinguished performance features and build quality. True car enthusiasts got acquainted with Nissan machines in the 90s of the last century, when the former was actively transported to Russia automotive technology. Since then, the army of fans of cars from this manufacturer is growing steadily.
How Nissan Almera Classic appeared in Russia
It is noteworthy that Nissan Almer N16 was designed by Nissan, although in 1999 Nissan and Renault have already united. The Korean company Samsung Motors was engaged in the starting launch in production, being one of the Renault divisions. The industrial release of the first generation of Nissan Almera N16 began since 2000 and continued until 2003, when the model restyling was held.
These inexpensive I. practical cars were created on the N16 platform, which was used when designing Nissan Primera P12 and Nissan Almera. Tino. On the territory of Russia, the Nissan Almer Classic N16 car officially began to import since 2006 and was sold until 2013.
After some time, the assembly in Russia of the third generation of Nissan Almera Classic, which had the G15 index had been established. The car is still produced at the factory in Togliatti.
Nissan Almera Classic G15 was created at the symbiosis of two platforms - L90 from Renault Logan. And L11K from Nissan. The video presented is shown the interior and exterior of the car. The exterior is taken from L11K - japanese Nissan. Bluebird Sylphy second generation. The car has a presentable European look and is very quickly selling. Despite the fact that during 2013, 20 thousand cars were issued, and since 2014 it produces about 50 thousand during the year, the demand for this model is very high and exceeds the supply.
Lubricants for Nissan
What engine oil is required to use the G15 and N16 classic for Nissan Almer so that its replacement affects the motor operation only positively? The fact is that each of these cars has its own engine. For example, in Nissan Almera Classic H16 facilities QG15DE (1.5 liters, 98 liters) or QG18DE (1.8 l, 116 l.). Nissan Almera G15 is equipped with K4M from Renault, 1.6 liters, 16 valves, 102 liters. from. This is the only engine that the machine is completed. russian assembly. All three engines - 4-cylinder, have 16 valves.
Nissan Almera 2013 release
What kind of oil is better pouring in Nissan Almer G15? Motor oil with such characteristics should be poured: SAE should be 5W30, during a warm climate, it is allowed to replace the All-season 10W30 or 15W30. The first digit means the temperature range of use, more precisely, the minimum temperature at which the oil does not thicken. Than the figure is less, the more with more low temperatures lubricant composition It remains liquid.
The second digit is the viscosity and reliability indicator, which forms the engine oil on the surface of the rubbing parts. The digit is more, the more durable and stable, without breaks, the film is formed. In new motors, there is enough viscosity 30. Over time, with a large range, it is desirable to increase the viscosity of the oil to 40-50.
Quality class by API: SL, SM. This means that engine oil with characteristics is intended for multiclap and turbocharged engines. SL class is designed for motors released after 2001, and class SM - for power aggregates After 2004. Class SM lubricants are better and wear-resistant.
Quality class on ASA: AZ / VZ. This means that lubricant is resistant to mechanical degradation and has high operational qualities. Should be applied in highly functional gasoline engines and has increased intervals between shifts.
Nissan Almera 2000 release
What engine oil is required to use for Nissan Almer Classic and N16? In the engine should be pouring a lubricant with SAE the same characteristics - 5W30, in the cold winter it should be used 0W30, with a warm climate, it is allowed to replace the all-season 10W30 or 15W30.
According to the API standard, there are more modest characteristics, SG, SH, SJ. These lubricants are designed for earlier release motors - since 1996 and later. Lubricants with such parameters have good resistance to the formation of precipitation and nagar, as well as are able to maintain their properties at low temperatures. Quality class on ASA: 96-A2. These are the lubricants of the standard level.
The output is as follows: Since the K4M engine is more modern, compared to QG15DE and QG18DE, the requirements for lubricating composition are much more harsh. That is, lubricants intended for K4M can be successfully used for earlier release motors, since their characteristics are better. On the video presented on the Internet, it is available to decipher the labeling labels.
The procedure for replacing the lubrication
What amount of lubricating makes a replacement in Nissan Almer Classic G15? For specifications, a volume of 4.8 liters of oil is required. It is best to use the original Nissan 5W30. Replacing lubricating fluid in Nissan Almera Classic N16 is performed if there is 2.7 liters of lubricant in the engine volume of 1.5 liters. This is a passport, and in practice it is necessary to lubricate a little more, up to 3 liters.
After which mileage is required to replace the lubricant? For Nissan Almera G15 Passport Mileage - 10,000 km for synthetics. Semi-synthetic oil It is required to change every 6000 km. In practice, considering russian conditions operation and quality of fuel, replacing the synthetic lubrication fluid should be carried out after 7-8 thousand, and semi-synthetics - after 5000 km of mileage. This will guarantee an excellent motor condition.
In Nissan. Almera Classic. N16 It is supposed to change the lubricant every 15,000 km of run. But for this car, it is best to carry out a procedure twice as often as indicated above. The order in which the lubricant is replaced, for both cars almost the same.
Before replacing, it is required to prepare: the container where the spent oil will be drained, a set of wrench keys, a surveyor for an oil filter or a key with a very wide grip, rags and a brush, lubricant in the required quantity, as well as a new original oil filter from Nissan and a new copper gasket for drain plug.
- The car travels to the observation pit or on the overpass, the engine is heated. On some video, the car is raised on the lift, but it is the worst option, because in the raised state it is impossible to get to the hood of the car, and it will be necessary to lower it, then raise.
- The hood rises and the filler plug is unscrewed, where the lubricant will be poured.
- Under the car, in the engine crankcase, a drain plug is unscrewed for a couple of revolutions. Before that, it is necessary to clean the surface from dirt. Capacity is substituted, the plug quickly turns out, freeing drainer. It is necessary to be careful that the hot fluid does not hit the hands.
- It takes some time to wait until all the lubricant follows from the hole. Is there some more good advice - To completely remove the remnants of lubrication from the Carter, you need to take a large syringe and put on it a thin hose, running it to the bottom of the Carter. From there, it will be possible to reach another 200-300 ml of the most dirty, spent lubrication fluid.
- After the entire lubricating composition is found, the drain plug with the new copper gasket is spinning on its seat.
- Next, unscrewed by the film by the old filter. Required again to substitute the capacity, because some kind of lubricant will flow from the mounting hole and from the filter.
- The new filter is poured lubricant, a little more than half of the volume, and oil is lubricated rubber gasket. The new filter is twisted into the installation hole, while it is not worth tightening it too much.
- A new lubricating composition is poured into the filling neck in the required quantity indicated above for each engine. Periodically, the level is checked by a dipstick until it reaches the middle between the minimum and maximum.
- The engine starts and works for a few minutes so that the lubricant uniformly filled the entire lubricant. Oil pressure light should go out. After that, the lubricant level is checked again. If necessary, slightly fill.
On the video presented on the Internet, you can see the process of replacing the lubricant clearly. The procedure is simple, even a novice driver will cope with it. Now the car can be operated until the next replacement.
