The competently selected kit and the size of the wheels on the energetic Ford Focus car will give him not only additional beauty and aesthetics, but also improve dynamic indicators. Each owner a passenger car Focus has the ability to purchase alloy wheels with identical diameter, rim and departure, as well as in standard wheels installed in the factory assembly.
You can also make a small restyling and install wider wheels with the smallest departure. As a result, Ford will look original and will slightly increase its dynamic indicators and stability on the track.
Almost always exists alternative option Replace the standard wheel and disk by analogues with large size rim. Ideally, after this, the vehicle should not have problems.
More massive wheels as a result will "require" use wide tires, and they contribute not only to the improvement of dynamic indicators, but also a high level of braking, respectively, the driver may feel calm even with aggressive ride.
The car owner must independently make a choice in favor of certain wheel sizes. Immediately before choosing and installing, it is necessary to carefully examine the basic parameters recommended by the car manufacturer:
- rim;
- breaking;
- departure;
- wheel size.
These parameters must match the characteristics. vehicle. If certain problems arose when installing the wheels with non-standard parameters, then for help it is better to turn to experienced specialists.
Detailed characteristics of wheel sizes, tires and disks on model Focus 1 and 2
According to the overall departure indicators ET for wheel disks Ford, the maximum deviation from the standard sizes should not exceed +/- 5 mm.
The disk size implies the optimal width of the product with respect to the tire no more than 20-30%. As a rule, tuning lovers and ordinary drivers do not always pay special attention For these indicators.
Many manufacturers began to produce various non-standard autody regardless of the width and height parameters. In addition, with a more wide disk, manageability indicators will improve.
But only in the case when tires and wheels with identical dimensions are used. For example, tires with a width of 185 mm are perfectly combined with discs 205 7J, 205 6J, 195 6J.
On the russian configuration Ford Focus in standard form established factory tires with a high profile, in contrast to identical models manufactured in foreign industries.
This allows you to install any bus, according to the specified instruction from the manufacturer, depending on the wishes and block control settings.
Factory characteristics from Ford:
- the total number of bolts for installing the wheel - 4;
- the central diameter of the fasteners -108 mm; in the designation 4/108;
- the dimensions of the diametrical holes of the wheel of the wheel under the hub - 63.3 mm, is indicated by D63.3.
If you use holes with smaller diameters, the wheel cannot be installed on the hub. For diametrical holes with large indicators, special adapter rings must be applied.
Standard disk size
As for the question of whether there will be a chain of the fever, it is necessary to follow the optimal recommended wheels of the wheels and install tires with a lower profile.
For example, you can use tires 205/50 / R16, but they do not guarantee a uniform calm ride - problems may arise at the time of the tunnel hook.
It is best to use tires 195/65 / R15, because the wheels with them become a little higher, due to which the performance indicators are improved.
The most popular and sought-after tire sizes on Ford Focus 1 and 2:
- 195/65 / R15;
- 185/70 / R14;
- 205/50 / R16;
- 185/65 / R14;
- 195/55 / \u200b\u200bR15.
If we are talking about ET indicators, then for cast and stamped discs, they are completely different. A smaller departure value indicates a wider range.
We also note that the secrets and nuts for the factory automobiles have a difference. The main thing is in the design and form. Cone corners of the working areas are adjacent to the working disk surface. Nuts on stamping have a smaller angle and, accordingly, not so much adjacent to the product.
Therefore, experienced professionals do not recommend using nuts for stamping as fasteners on casting. Too small contact area with a working surface, which means that bad mount for the car. It is necessary to take into account the fact that each tightening of the nut will gradually correct contact with the working surface.
To check the hitch of a new disk for the calipers, you must perform the following procedures:
- install it on the valve;
- perform screwing nuts to the hub;
- fully spin the disk.
Fold Focus 2 Wheel Drive 2, 3
Example: Wheel breakdown on Ford Focus cars with 5/108 parameters. Many lovers of auto may have problems with the designation of these numbers. Therefore, we specify them in more detail their decoding:
- number 5 denotes the total amount of diametrical holes for the fasteners of the wheel;
- the number 108 indicates the size of the diameter of these holes.
Disc departure on models Focus 2 and 3:
- standard size is 52.5 mm;
- departure Wheel on Reystayling is 50 mm.
For beginners, departure is a rather complicated and difficult concept. If we talk simple words, then disk departure Indicates a common distance from the middle of the product to the main zone of fastening elements located on the hub.
- R15 / 195/65;
- R16 / 205/55.
The letter R denotes the radius of the wheel.
Wheel breakdown on focus 3
The total parameters of the 3 generation of focus are practically no different from similar models 5/108.
Wheels on 3 Release Ford Focus
The third release of the famous focus model was implemented in 2010. The car was presented at the famous Salon in Detroit. The vehicle was presented in several bodies: sedan, wagon and hatchback.
It is known that Ford Focus Until now, is one of the most sought-after cars around the world. Annually selling, and lovers of this car are satisfied with its simplicity in operation and stylish design.
The American manufacturer has achieved such results due to the high ratio between quality and cost.
In addition, 3 car release was performed in kinetic design. Many admired the originality and uniqueness of this car. On the track, the focus demonstrates excellent characteristics and indicators of control, starting acceleration and stable ride.
Good management on the vehicle achieves due to improved balance between discs and tires. Therefore, it is necessary to consider the main type of rubber and disk parameters for optimal ride on focus 3.
Optimal wheel sizes
Each car released by the American Ford Line has certain size sizes and tires recommended by manufacturers. Consider the main parameters required for good handover by car:
- Disk dimensions: 16, 17 and 18 inches;
- Tires 235/40 / R18, 215 / 50R17, 205 / 55R16;
- Disk width ET50, ET55.
Absolutely for all wheel sizes 5/108 fastening elements with a central diametrical hole of 63.3 mm and a heap of 14.5 mm are used.
When recorded the main indicators, everyone can decide on the choice of wheels on the Focus Model 3. As optimal option Recommends the use of original factory products or similar products from eminent brands.
Branded models are more durable and reliable because they are specifically produced for a particular focus model. This is very important factorEven in that situation when the car runs on a deep pit or crack.
As a result, the wheelheaper is not deformed, and the driver continues to control the control of the vehicle.
The discs are selected according to the width of the tire, they must be identical. In most cases american company Releases original factory stamps on focus 3. Such discs are perfectly operated in sophisticated conditions And have a small cost.
In addition, acquiring such discs, you can not take care of the amount, because they are automatically suitable for standard focus wheels.
In compliance with the competent recommendations, the car's amateur does not have problems with the choice of wheel size on the Ford Focus car. If you wish, you can use non-standard models, but it will be necessary to change the technical components of the vehicle slightly.
Using proper tires overall dimensions Allows you to avoid problems on the road, save handling. But many owners are installed on Ford Focus 3 non-standard diameter rubber. The use of larger wheels can cause serious problems - it is necessary to carefully approach the selection of cylinders.
ATTENTION! Found a completely simple way to reduce fuel consumption! Do not believe? Auto mechanic with 15 years old also did not believe, until he tried. And now it saves 35,000 rubles per year in gasoline!
The size of the tire is not the only parameter to take into account which you must necessarily when buying the wheels in the auto shop. There are many more important parametersWith which you need to get acquainted in advance. When choosing, you need to consider:
- features of the design of a particular vehicle, installed engine - diesel, gasoline, other;
- disk type - stamped, forged, cast;
- the magnitude of the contact stain and the load on the wheel.
It is important to take into account all the nuances listed above. Only so you can avoid standard errors when choosing new wheels. Cars 2018-2019 releases are supplied in two sets:
- stamped steel discs with tires 205/55 R16;
- alloy alloy wheels with rubber 215/55 R
The options listed above are standard, staten sizesThe installation of which is carried out directly at the factory, when assembling the car. It is the above options that are optimal for this vehicle. Size 16 is standard, positioned as a regular diameter. However, it is possible to install non-standard wheels with a large radius.
It should be noted: in dealer centers Automobiles are usually supplied with a rubber appropriate standard dimensionsdetermined by the manufacturer. However, it should be noted - on sale there are new cars on the Continental and Bridgestone rubber.
The reason lies in the annual change in value specific models Tires. After graduating from a large batch purchased wholesale from one manufacturer, the plant can make a choice in favor of another brand. This explains the presence of different tires.
What non-standard dimensions can be put
The manufacturer laid in the design of the car the ability to install wheels with a diameter of 17 inches. Moreover, the maximum permissible size in which the operation of the vehicle will remain safe - 215/50/17. However, on each modification of the vehicle there are specific dimensions.
To familiarize yourself with them, it is not necessary to directly contact the manufacturer either to the service center. All the necessary information is located on a special plate located on the door stand from the driver. The ability to install non-standard disks or tires by 100% depends on the specific conditions and the car itself. Main conditions:
- new tires and equipped with them drives should not hurt brake caliper, other mechanisms, fenders;
- the breakdown should be standard - 5 × 108 mm;
- the diameter of the central opening is 63.3 mm;
- the diameter of each heel is 14.5 mm.
Another important condition - rubber should not touch the body even with full turn, compression of the rack. The design of the car is allowed to install the wheels of three different diameters:
- 16 inches - 205/60/16;
- 17 inches - 215/55/17;
- 18 inches - 235/40/18.
The last option is the least preferred - however, on the disks of the diameters of 18 inches, the machine looks much more presentable. However, it is easy to damage the disc in just 40 mm high.
What is especially sad when using alloy models. The cost of such discs can reach 15-25 thousand rubles per 1 piece.
What is the pressure in tires
Another mandatory condition for the safe operation of the car is the pressure corresponding to the established standards. You can familiarize yourself with these parameters yourself without leaving the car. The nameplate with all the necessary data is located right on the door rack. However, the owners often do not pay attention to this parameter.
It should be noted that non-standard pressure leads to serious problems. Packed wheel:
- can burst right on the road - even the slightest impact will damage the integrity of the rubber structure;
- the central part of the tread is rapidly wears - uneven stratification leads to the need to replace tires;
- controlness worsens, suspension wear increases.
The bad wheel is less dangerous. However, low pressure will cause the rapid erase of the tread on the sides of the wheel. Uneven wear And the wide contact spot also leads to a deterioration in manageability, other issues. It should be noted that the recommended pressure for tires differs depending on the level of load and some other parameters. For speed up to 160 km / h:
In most cases, it is enough to pump the front and rear wheels to a value of 2.1 bar. However, with full load, it is necessary to increase the pressure to 2.4 on the front wheels and 2.8 on the rear wheels. This will preserve the responsiveness of the steering wheel, make the control of the laden machine more comfortable.
Overview of the best summer and winter tires
With intensive operation, rubber is required to change. And for summer and winter drive, it is required to purchase a different kit. Good choice will be model Continental PREMIUM FLAT 205/55 R16. This rubber is characterized by high quality, a special composition of rubber. The presence of a rigid side frame allows even with a fully swashed wheel easily reach the nearest tire.
Michelin Pilot Sport 4 is supplied with an additional nylon layer. Complaintively reinforces the working part of the surface, prevents a random break when strong shock. The name of this model does not accidentally have a Sport console. It is perfect for fasteners of fast ride.
Bridgestone Potenza. S001 due to asymmetric tread design has excellent brake characteristics. The presence of special drainage lamellas eliminates the likelihood of aquaplaning. The driver is safe even in difficult road conditions.
Goodyear Eagle Sport is positioned by the manufacturer as a sports option. In fact, this is a budget analogue of the tire models discussed above. The cost of goodyear is an order of magnitude cheaper (the difference is 2-3 thousand rubles). In this case, the running characteristics are practically no different from more expensive models.
Tunga Zodiak - domestic production. Represents a budget option Rubber, produced in an Omsk plant. It works well with an expensive of any quality. However long operation The likelihood of the appearance of hernia, deterioration of balancing.
Nokian Hakkapeliitta. 9 Run Flat - one of the most expensive, reliable tires in the segment winter tires. The composition of rubber is referred to as Special Clinch. The protector has a V-shaped form. Which provides perfect contact with the roadpapers.
Nokian Nordman is a budget analogue of hackcappelites. The cost of this model from Nokian is 2-3 times less. Excellent quality is combined with availability.
Yokohama IG55 is positioned by the manufacturer as a rubber specially designed for operation in severe frosts. At its price, comparable to Nordman. Owners celebrate a soft move and low level Noise regardless of the speed of movement.
Michelin X-Ice North is a real standard in the sphere of the tire industry. The total number of spikes is 250 pieces. It provides excellent clutch with an expensive even with winter time.
Cordiant Snow Cross. - this is a budget version winter rubber. Due to the unique design of the tread, it is possible to achieve a good clutch with an expensive. Snow-Cor technology applies. The protector independently cleans itself from snow, dirt.
To choosing rubber, especially winter, it is necessary to approach with full responsibility. Properly collected wheels ensure the safety of the driver and its passengers on the road.
Select the correct size of the Ford Focus 3 wheels - easy. The factory parameters correspond to only one size of 16 inches, so there should be no problems with the choice. The car was produced in the bodies of the sedan, hatchback and wagon. Completed both alloy alloy products and steel, produced by stamping. Tires and disks for "focus" in the third generation is important to choose correctly and efficiently. Auto has long history, for 20 years ford. Releases this popular model. Recently, the fourth generation has been presented.
Since 2011, the third generation of the car has gained very high popularity in Russia. In 2018, he was replaced by a newer, fourth generation, which embodied all the qualities of the predecessor and gained many new ones.
Winter tires on Ford Focus 3
To date, on the shelves of auto shops, a very wide range of products for the machine is presented. This also applies to the wheels on Focus 3, which manufacturer are limited only in one size - by 16 inches.
The owners of this popular car, like any others, are also faced with the need to replace tires before the onset of a certain season. In this case, you have to choose from a variety of options presented in products. It can be both very famous and expensive brands and models of cheaper.
The selection of the brand and the properties of rubber depend only on the personal preferences of the motorist.
It is worth remembering that even the products of very expensive producers can be absolutely useless with improper operation and storage. It is very important to select products only with correct dimensions And constantly monitor their condition. This also applies to the installation of tire pressure, which is regulated by the manufacturer and is indicated in the technical documentation.
The market of the country is rich in suggestions for sales of rubber in various performance and having different characteristicsthat are even suitable for the most demanding car owners. This is related to the great popularity of the car.
It is also worth noting that the safety of the driver and passengers will depend on the correct selection of tires.
In difficult weather conditions, on slippery coating from installed rubber Often, people's lives depend on. In addition, tires have a huge impact on the level of wear of the parts of the chassis, controllability, dynamic characteristics and other qualities.
Wheels with a dimension of 16 inches on the "focus" How to choose
For high-quality selection of tires on the Ford Focus car 3, you need to know what the main differences are and what they are.
For seasonality, the tires are:
- Summer. Only starting from the temperature from five degrees Celsius can be operated. The tread pattern in such tires is not very pronounced, compared to winter. Operating summer products at elevated temperatures, they become solid and cooled themselves. Suitable for ride at high speeds on good roads.
- Winter. Can only be operated in winter, with a temperature regime below zero degrees Celsius. The protector of these tires is much deeper than the summer analogs. At cold temperatures, rubber independently heats up and increases its own elasticity. In this regard, the grip with road coating. This makes the car more manageable, reduces the distance of the braking path and increases dynamic qualities. The service life of winter rubber is usually more than summer, because average speed less.
- All-season. Often the name is "universal". They are middle link between winter and summer. Manufacturers indicate that it is possible to use the rubber of this type regardless of the season. However, professionals are recommended to establish this type only when the temperature on the street is ranging from -5 to +7 degrees Celsius. In fact, universal tires are inferior to the winter in the cold season and summer - in warm. Therefore, it is popular in countries with relatively warm climates and dry winters. It is forbidden to exploit them in very hot and very cold weather.
Owners of any cars, like the happy owners of Ford Focus 3, are always interested in various issues related to the operation of their cars, including the issue of installing tires.
Usually, the euphoria from buying a car ends after a few months, and a happy auto owner begins to understand that something does not suit him.
Some drivers want a stronger motor, others do not suit the quality of music, and the third wish to change the tires for a more comfortable ride. And even with complete idylls, it will still come to change the rubber due to the inevitable wear.
What tires are suitable for Ford Focus
- Constructive features of the car - sedan it, hatchback or wagon, diesel engine or gasoline
- A type wheel Disc - stamped iron or alloy cast
- Wheel Installation Place - Front or Rear Wheel
- Load on wheels - Normal car load or maximum mass with cargo and passengers
- The use of standard recommended by the manufacturer of sizes, or tuning, which includes replacement regular drives, and possibly making changes to the suspension design.
These technical features will contribute right choice The size of tires and disks, but on this work on the selection of rubber will not end, as the manufacturer's choice remains. Here you will have to rely on the reviews, the popularity of the brand and the financial capabilities of the buyer.
Standard sizes of the third focus wheels
By purchasing a car in the cabin, a potential auto owner will face a minimum options for installing the wheels. This is due to the fact that car dealers do not specialize in selling tires, and the main task facing them is the sale of the car!
Most often, the salon will offer only two options:
- 205/55R16, if the discs stamped steel
- 215/55R16 if the buyer agreed to survive on alloy alloy wheels
At the same time, the manufacturer allows the installation of cast discs with rubber 215/50/17. However, on each species of the model there are specific sizes, a table with which is usually glued at the driver's door stand.
But the tires drivers can get caught different depending on the purchase time. Apparently the auto plants buy large buses of tires, and therefore for a long time from the conveyor cars descend on the same tires. Then for any reason, for example, due to improving the value of the usual rubber, the plant goes to another! So you can buy Ford Focus 3 and on the Kontinal tires, and on the Bridgestone rubber.
Non-standard sizes of tires Ford Focus 3
The ability to install non-standard tires and discs completely depends on the technical conditions. Discs should not touch the brake discs and calipers, the breakdown should remain standard 5x108, central hole diameter 63.3 mm. And the holes for the heels must be 14.5 mm in diameter. Rubber should not touch the car body even with full turn or full compression of the rack.
What non standard size Tires usually choose the owners of the focus?
If size 16, then it is 205/60/16, to thanks more high profile There was no breakdown on the pits.
If 17 diameter, put 215/55/17
On 18 discs you can put 235/40/18, although on most bad roads with such rubber it is easy to break the cast drive!
Tire pressure Ford Focus 3
On the door stand, there is also a wheel sizes, the manufacturer's plant indicates the nominal pressure that should be in the front and rear wheels. These values \u200b\u200bmay differ from the variety of the model, as well as on the size of the wheels recommended for use on this car.
But often car enthusiasts depart from these norms in the large side with full loading or at a smaller side for a softer ride.
For those who do not like to bother, you can recommend setting pressure in wheels in the area of \u200b\u200b2.2 atmospheres, and it will be fine.
For specially scrupulous drivers, there are more accurate data, such as in this table:
Although it is best to use those data that are pasted on the car itself.
Characteristics of discs and wheel dimension are set by the plant taking into account technical features The car, while the selection of tires on the manufacturer will still have to do the car owner itself! And influence this can price, reviews of motorists, your experience or someone's recommendations! And also have to use different rubber in winter and summer!
Summer tires on Ford Focus 3
- Continental Conti Premium Contact Run Flat 205/55 R16 belongs to the class of premium and differ in a special composition of rubber and constructive features Frame, allowing even a tire to get to the car service, without destroying the cord and retaining the protector. Its drawing is also special, which increases the area of \u200b\u200bcontact with the road surface and prevents aquaplaning.
- Michelin Pilot Sport 4 205/55 R16 - This premium bus is distinguished by not only an improved tread pattern and the quality of the rubber mixture, but also the presence of an additional nylon layer that enhances the operating part of the tire on the gap. That is why such a tires will come sports cars from strong engines and good dynamics. At the level of the usual car owner, this is a reliable tire with a strong fixation of the position on the track. Excellent option For those who appreciate security.
- Bridgestone Potenza S001 205/55 R16 is a symbiosis of a special rubber mixture and an asymmetric design of the projector, providing amazing braking efficiency, giving security confidence even in the most extreme situations when the Bridgestone Potenza protector perfectly copes with critical loads.
- Goodyear Eagle Sport 205/55 R16, exactly also on the market, as a sports vendor, is actually a budget analogue of the premium class models above. Excellent tires with an excellent tread pattern, providing a reliable clutch with an expensive at the same time for 2-3 thousand rubles cheaper than Michelin, Bridgestone or Continental.
- Tunga Zodiak 2 205/55 R16 is the most fiscal option manufactured in Omsk tire factory. In a new state, it is quite well coped with the holding of the car on the road. Relatively noise, however, with long use, the appearance of hernia and loss of balancing is possible. This is due to the low quality rubber. And it is expected, since the price reduction is not just like that, because this tire is three times cheaper than a similar tire Michelin.
Winter tires on Ford Focus 3
- Nokian Hakkapeliitta 9 RUN FLAT 205/55 R16 is one of the most dear tires In its segment. The qualitative composition of rubber is called Special Clinch and provides actually perfect contact with the road. The V-shaped protector and well-thought-out misappropriate make it possible to hold the car in a given direction even under the most adverse conditions of ice and wet asphalt.
- Nokian Nordman 7 205/55 R16 is positioned as a budget analogue of hackcappelites, and this is actually so, because the cost of this tire is 2.5 times lower than that of Nokian HakkaPeliitta, which allows you to call this model truly popular selection that combines excellent qualities With relative low price.
- Yokohama Ig55 205/55 R16, this is a truly Siberian tire, if you believe the description from the manufacturer, as it is positioned as rubber for strong frosts. The cost is comparable to the Nordman price, so the choice is not made at a price, but only by reviews and experiences use. There is a softness of the stroke and low noise on the open asphalt.
- Michelin X-Ice North 4 205/55 R16 Like all other representatives of Michelin, this tire can be called the reference product of the tire industry. The increased number of spikes, the number of which reached 250, along with a well-thought-out protector and soft adaptive rubber, make this product one of the most popular on the market.
- CORDIANT SNOW CROSS 205/55 R16 This is the most budget version of winter rubber, according to its characteristics, suitable for Ford Focus 3. When creating a tread, Snow-Cor technology was used, allowing the pattern to be independently cleaned from snow when driving. When mistakes, a two-fledged spike of a special design was used, giving a good grip with andoing road.
