| The size | Load index | Speed \u200b\u200bindex | Pressure, kgf / cm² |
| 195/65R15 | 91 | V. | 2.2 |
| 205/60R16. | 93 | V. | 2.2 |
| Replacement | |||
| 205/55R16. | 91 | V. | 2.2 |
| 205/55R16. | 91 | V. | 2.2 |
| 215/45R17. | 91 | W. | 2.2 |
| 215 / 50R17 | 91 | V. | 2.2 |
| 215 / 50R17 | 91 | W. | 2.2 |
| 215/45R18. | 89 | W. | 2.4 |
| 225/45R18. | 91 | W. | 2.2 |
Disk
| The size | Departure | Drill |
| 6JX15 | Et50 | 5 × 114.3. |
| 6.5JX16. | ET55 | 5 × 114.3. |
| Replacement | ||
| 6.5JX16. | ET55 | 5 × 114.3. |
| 7JX16. | ET55 | 5 × 114.3. |
| 7JX17. | ET55 | 5 × 114.3. |
| 7JX17. | ET60. | 5 × 114.3. |
| 7JX17. | ET60. | 5 × 114.3. |
| 7JX18. | ET55 | 5 × 114.3. |
| 7.5JX18. | ET60. | 5 × 114.3. |
Mazda 6 II GH
205 – tire width. The indicator is calculated as the distance between the outer boundaries of the lateral surfaces of the pumped tire without taking into account the protective belts. Measured in millimeters.
60 – tire profile height thatit is measured as a percentage of width. What does it mean? To find the height, you need to calculate 60% of 205 mm. Thus, the tire height is obtained: 205 x 0.6 (60%) \u003d 123.0 mm
R - Means the Radial Bus. From the English word Radial, that translated means a radial type of tire. This is a method of laying rubber and metal Cord in production. Of course, you can meet the letter D - diagonal, but these tires have now practically disappeared from production.
16 — the diameter of the hole in the rubber, or on which disc can be mounted this rubber, that is Diameter disk. This size is always indicated in inches!
The diameter of the disk cannot be greater or less than the diameter of the wheel, you simply do not wear it. That is, if the rubber is 16 inches (406.4 mm), then the disk should be 16 inches (406.4 mm)!
Additional Information
Mazda 6 GH, years of release: 2007 - 2012.
- Fasteners for the hub: Nut;
- Thread: M12 x 1.5.
Additional information indicated in the marking on the sidewall bus:
- XL or Extra Load - stressed tire, the load index of which is 3 units higher than that of the usual tires of the same size.
- M + S or M & S (Mud + Snow) - dirt plus snow - winter and all-season tires.
- All Season, AW (Any Weather) or AS - All-season tires
- Pictogram * (Snowflake) means that the rubber is intended for use in winter conditions. If there is no tire on the sidewall this label, then this tire is designed for use only in summer conditions.
- Aquatred, AquaContact, Rain, Water, Aqua or Pictogram (umbrella) - Special rain tires.
- Outside and Inside - asymmetric tires, when installing, it is important not to confuse which side is outdoor, but which is internal. When installing the outside, the Outside must be with outdoor car, and inside - with internal.
- Rotation or arrow - This marking on the sidewall of the tire means a directional tire tread pattern. When installing the tire, it is necessary to strictly observe the direction of movement.
- Tubeless - Delicious Tire. In the absence of this inscription, the tire can only be used with the camera. Tube Type - indicates that this tire must only be operated with the camera.
Tire
| The size | Load index | Speed \u200b\u200bindex | Pressure, kgf / cm² |
| 205/60R16. | 93 | V. | 2.2 |
| 205/60R16. | 92 | V. | 2.2 |
| Replacement | |||
| 215 / 50R17 | 91 | V. | 2.2 |
| 215 / 50R17 | 91 | W. | 2.2 |
| 225/45R18. | 91 | W. | 2.2 |
| 225/45R18. | 91 | V. | 2.2 |
Disk
| The size | Departure | Drill |
| 6.5JX16. | ET55 | 5 × 114.3. |
| 6JX16. | Et50 | 5 × 114.3. |
| Replacement | ||
| 7JX17. | ET60. | 5 × 114.3. |
| 7JX17. | ET60. | 5 × 114.3. |
| 7.5JX18. | ET60. | 5 × 114.3. |
| 7.5JX18. | ET60. | 5 × 114.3. |
Mazda6 III GJ.
Regardless of the method of disc production - cast, forged, stamped, there is a standard labeling of the size of the disks.
We will analyze the main parameters of 6 GJ - 7.5JX17 5x114.3 ET 50.
7.5 - Width of the disk in inches. Translated to millimeters is 190.5 mm.
J - the symbol indicates certain constructive features - The form of clouds from the disk and serves only for information.
17 - the boarding diameter of the disc in inches, which exactly corresponds to the tire's landing diameter.
5x114.3 - PCD (Pitch Circle Diameter) or Controlling in Russian. Here, the number 5 denotes the number of nuts for nuts, and 114.3 - the circle diameter (PCD) in the millimeters on which they are located.
ET 50 - departure from this disk is positive and is 50 mm. The disc / or removal) is the distance between the wheelbase of the wheel disk and the middle rim wheel. A flourishing plane is a surface that the wheel drive is pressed against the car hub.
Additional Information
In addition in marking 6 GJ, 2012-2015 Information may be indicated:
- Dia D 67.1 - the diameter of the central opening in mm. In an ideal situation, this size corresponds to the landing diameter of the hub. On many cast discs for greater versatility and applicability various brand Car, the diameter of the central hole Dia is made great. In this case, the landing diameter of the hub is less than the DIA disk, and then it is necessary to use a special centering landing ring (transition ring).
- Max Load - Designation maximum load on the wheel (denoted in pounds or kilograms).
- SAE, TUV, ISO is an analogue of our GOST, which controls the authority. Indicates the standard that matches the marking of this wheel.
Tire
Disk
Mazda Mazda6 III GL
Years of release: from 2015.
Additional Information
- The diameter of the central hole (DIA): 67.1 mm;
- Fasteners for the hub: Nut;
- Thread: M12 x 1.5.
Tire
Disk
Marking of rubber and wheels carries a lot of necessary information, it is important to be able to deal with it. Without this information, you will not be able to choose the right tires on your car, they simply do not fit into dimensions. Special plates are applied on the car body with recommendations on the dimension of tires, just read them and go to the store for new ones. However, there are not always such signs, and it is necessary to determine the size of the Mazda tires 6!
Using automatic selection of tires and discs for the car Mazda 6.A variety of problems associated with their compatibility and compliance with the recommendations of automakers can be avoided. After all, they turn out to be a huge impact on a significant part of the operational properties of the vehicle, primarily on handling, fuel efficiency and dynamic qualities. In addition, it is impossible not to note the importance of tires and wheel diskslike elements active security. That is why their choice should be approached as responsibly, i.e., with knowledge about a number of parameters of these components.
Unfortunately, only a small part of the car owners owns such technical nuances. However, automatic system The selection will be extremely useful, regardless of this, since it will minimize the likelihood of incorrect selection of wheeled wheels or tires. And choose from anything, thanks to the widest assortment of such products presented in the Mosavtranshina online store.
Mazda 6 is a car of a passenger class from the Japanese concern of the same name.
Since the presentation of the Mazda model 6 and until the end of 2018, three generations were released, namely:
- Mazda 6 GG in the period from 2005 to 2007;
- Mazda 6 GH in 2010;
- Restyled version in 2011;
- The third generation in early 2012.
Changes touched not only exterior, but also of the interior, technical characteristics, power aggregatetransmissions.
Sizes of full-time disks for generation Mazda 6
| Mazda 6 (2002 - 2007) | |
|---|---|
| Original (Tire) | 205/60 R16 |
| Replacement | 205/55 R17, 215/55 R18 |
| "Factory" equipment discs | R16 5x114.3 6J ET50, (6.5J), (ET55) |
| Disc parameters | PCD: 5x114.3, Dia: 67.1, Nut: 12x1.5 |
| Replacement | R17 5x114.3 7J ET50, ET60, R18 7.5J |
| Mazda 6 (2008 - 2012) | |
| Factory equipment | 205/60 R16 |
| Replacement | 205/55 R17, 215/55 R18 |
| --/-- | R16 5x114.3 6J ET50, R17 5X114.3 7J ET50 |
| Mazda 6 (2013 - 2015) | |
| Original | 225/55 R17 |
| Replacement | 225/45 R19 |
| Mazda 6 (2016 - 2021) | |
| Original | 205/60 R16 |
| Replacement | 225/55 R17, 215/55 R18 |
| --/-- | R16 5x114.3 6J ET50, R18 5X114.3 7.5J ET60 |
Alternative Options Mazda Disc 6
- Cast: low weight, low pressure on support bearings, hub, transmission;
- Stamped: durable, expensive;
- Forged: durable, one third is easier than analogues.
| Name | Manufacturer |
|---|---|
Light alloy | Aitl - 534, 605 Alcar - Hybrid ALLANTE - 184 (HB), 561 Alutec - Freeze, Grip, Ikenu, Monstr, Raptr, Singa, Xplosive Angel - Hornet 601, Rapide 609 Arbet - 1. ATS - Emotion, StreetRally Autec - Hexano, Ionik, Nordic, Polaric, Quantro, Skandic, Wizard, Xenos, Yucon, Zenit Autom - 569, 803 Borbet - CA, F DISLA - Evolution, Formula |
Stamped | Kfz - 6525, 7503, 7625, 7855, 7856, 8005 ZW - BK5372 (BP) Tech Line - 640 Tomason - TN11 TRW - Z1108 (DGMF) VOSSEN - CV3, VFS-5 Wheel Master - 0366 WSP Italy - W1704 ZD - 21. ZF - FM039 (BMF) |
| Replica - Mazda SSL016 (HS), NS5264 Rial - Arktis Sportmax Racing - 1235 Storm - BK-438 Tech Line - 1603 Lawu - SL-511, YL-245, YL-828 LSW - L-335 Mak - Nitro. Marcello - MR-07 PDW - 8052. Racing Wheels - H-126 RC DESIGN - RC-11 REPLAY - NS38. |
|
European brands | DISLA Assassin Black Matt, Gunmetal Diamond Dotz Dakar. Hamann HA1005 (MB) (BMW) Kapitan Berlingo / Partner 1998-2002 Black KORMETAL KM 225 Firebird, km 250, km 245 Tornado Kosei RX SUV. REPLAY A101 (GMF), A25 (GMF) Replica Legeartis A47 (SF), A513 (BKF), A521 (BKF) Tech Line 311 BD, 503 BD, 526 BD Vianor VR13 (SF), VR16 (BKF), VR29 (GMF), VR32 (SF) WSP Italy T562 AMALFI AU62 Silver, W1006 Cayenne Po06 Chrome, W1050 Philadelphia Antracite Polished, W1052 Corsair GT3 / RS FL.F PO52 Glossy Black |
* Specify prices in stores at the time of purchase.
- Check the wheel balancing on a special diagnostic stand In workshop. When detecting deviations, restore the design geometry. It is impossible to "reanimate" the disk due to the lack of necessary equipment;
- When cracking, dents on the rim, contact a service station for prevention, rolling;
- On high, medium high-speed modes Avoid getting into pits, bumps. The disk is deformed, the tightness will break, the tire cord is damaged;
- Watch out for the pressure in the tires, it should not be different from the manufacturer recommended by the manufacturer. When deviations, turn yourself on yourself, contact the service station;
- Observe the transition to summer, winter modes. In summer, the tire pressure is higher by 0.15 atm., In winter less on a similar value. The parameters are listed in the operating instructions;
- Tighten the nuts on the rim dynamometric key. Excessive tightening contributes to the cliff of studs, weak - unscrewing. What will lead to a collision on the road with a meeting participant of movement.
In sunny weather, cast aluminum discs are less susceptible to the devastating effect. But in a slush, ice, when the road is sleeping with chemical reagents, the rim is of corrosion. It provokes paint delay, molecular composition destruction, decreased structure strength.
Wash the wheels as they are contaminated. Since the rag is hardly washed hardly, use high pressure compressors. Such a class equipment is available on many hundred, workshops, service centers.
Systematic polishing allows you to get rid of scratches. Previously clean the wheel from dirt, dry carefully, after which we treat with a chemical. Wipe with a rag several times.
Keep the wheel in possession, do not storage at each other. Clean the dirt, dry, wrap the cellophane. Some motorists practice conservation to apply an aerosol on the surface.
Medium resource exploitation original disks 180 - 200 thousand km. Under the condition of moderate driving style, the replacement interval will increase by a third. The resource of the use of tires 70 - 80 thousand km.
What is affected by the installation of freelance disks on the Mazda car 6
Tire size, disks affect the technical characteristics of the machine. The instruction manual shows the recommended and permissible dimensions.
For the driver who uses the car as a means of movement, "factory" (stock sizes of the rim is more than enough. In the case of tuning, changes standard characteristics, dynamic indicators, "Pereobut" the car in non-standard sizes wheels.
The list of characteristics that change the installation of freelance wheel sizes to the Mazda car 6:
- Controllability;
- Clutch with roadbed;
- Sharpness, responsiveness of the steering wheel;
- Avaplaning;
- Comfort;
- Noise level;
- Fuel consumption in a mixed cycle;
- Tread wear.
Decryption of labeling of discs, tires on Mazda 6
For example, R19 5 × 114.3 6.5J ET50 (see photo):
- PCD (Pitch Circle Diameter) Diameter of the circle of the center of the mounting holes: 71 mm;
- Disk radius: for 19;
- Number of holes 5;
- Type of fasteners: M11.0 - diameter of the heel;
- Thread size (step): 1.25;
- The diameter of the central opening: 67 mm;
- Pressure (front / rear): 2.0 / 2.0 bar.
PCD Parameter: Distance between centers of opposite holes. Measurement of the line without dismantling the wheel. For a five-bolt design, the resulting distance must be multiplied by the coefficient of 1.05.
Rim departure ("ET"): the distance between the point of contact with the disk to the hub and the middle of the rim width. Designation: Deport, Offset. The removal is positive if the plane does not go beyond the point of contact, otherwise the departure is negative. The further the rim is from the body, the amount of departure is to the zero mark.
- D - the diameter of the center opening, is measured in millimeters.
- J, H and subsequent alphabetic symbols indicate the labeling of the champs on the rim shelf. Symmetrical, asymmetric and combined.
- "Hamp" is a lease on the rim for delivel tire. When moving "Rails" keeps the tire board, preventing depressurization.
Digital characters indicate the release date, month, year.
- TUV - Abbreviation of the controlling body, for compliance with quality standards.
Maximum load on the wheel: Unit of measurement depends on the country of rubber manufacturer, rim.
Mazda 6 wheels break - a widespread parameter that denotes the method of fastening the wheel to the design of the car's chassis. This prevalence is associated with the fact that most of the Japanese and Korean automakers determine the identical dimensions and parameters of the disks and tires so that motorists it is easier to choose. The disks of the Mazda 6 disks are provided by the plant in one embodiment and is equal to 5 × 114.3 regardless of generation. As for the wheels themselves, depending on the year of production, they were installed in size from R15 to R19. Correctly choosing and installing a set of wheels on the machine, you can well improve the exterior design and get a high level of manageability and stability.
If necessary, certain improvements in the appearance or technical characteristics of the model car Mazda. 6 It is necessary to choose only spare parts and components from official manufacturers. Every motorist knows that the wheels are the main part of the exterior. From their size, color and forms, most of the design depends on. From the method of their manufacture, not only the exterior of the car depends, but also driving quality, which is much more important external view. The vehicle with large wheeled disks looks more attractive than similar to small.
Mazda 6, Configurator
Improve the appearance of the car, of course, it is important, but it is not a major priority. For any type of transport, it is more important for making changes to the original design not reduced efficiency and resource. It is recommended to select only such spare parts and elements that would correspond to the factory technical characteristics and safety requirements.
In addition to a pretty appearance, installed wheels Must be approached in all the parameters of the Mazda 6 Wheels 2006, or any other year of release. In addition, there must be complete compliance with the established factory sizes of products. The inconsistency of the necessary parameters leads to incorrect and unsafe operation of the car. Incorrectly chosen sinking "Mazda 6" leads to the fact that the purchased disks simply do not fit, and they will have to return back. It delivers unnecessary troubles. There are methods, for example, the use of transition rings - it allows you to install even inappropriate wheels. However, in this case, the movement will be a permanent risk for the safety of the driver and passengers.
With the change in the size and parameters of the wheel drives, you must not forget about proper selection new tire set.
Tools (PCD) decrypt as Pitch Circle Diameter. The value implies the number of bolts that are used for fastening the product to the chassis and the diameter of the circle on which the bolts are located relative to each other. When selecting a new set of wheels, you must carefully consider this parameter. Otherwise, with ignorance there is a big risk to buy unsuitable products. It does not matter who manufacturer of new discs, it can be original models or products of any other manufacturer. All of them must correspond to the permissible parameters and sizes.
This parameter can be measured independently. To do this, there will be a fairly simple ruler, but for maximum accuracy it is better to use a caliper. With the number of bolts there are no problems foreseen, they are very easy to calculate visually. But with the size of the diameter arise difficulties. It requires high accuracy of measurement and knowledge of special formulas to determine the parameter. It is best to watch it in the official technological documentation for vehicle Or pick up the tables presented on the Internet.
Incorrectly selected and installed wheels for any car - high risk of threat to the safety of the driver and passengers.
At best, low-quality products will increase the wear of parts and knots of the suspension, and in the worst - may cause an accident.
Mazda 6 last generation Parameters for other models
The popular model from the manufacturer "Mazda" CX 5 is the average dimensional crossover and has an increased mass compared to the sixth model. The importance of discs for it is even more than for a sedan. Therefore, it is very important to apply only high-quality and official products for improvement and tuning.
Note!
On Mazda CX-5, discs are installed only in two sizes - R17 and R19.
In addition to the size of the diameter and width, the cardinal differences in the parameters from Mazda 6 are not. It is necessary to consider which parameters of the smear "Mazda CX 5":
- 17-inch with parameters - 5 × 114.3; 7 × 17; ET50; D67.1. Tires 225/65 / R17;
- 18-inch with parameters - 5 × 114.3; 7 × 18; ET50; D67.1. Rubber 225/60 / R18;
- 19-inch, having parameters - 5 × 114.3; 7 × 19; ET50; D67.1. Rubber 225/55 / \u200b\u200bR19.
The car "Mazda CH-7" is equipped with such wheels:
- The diameter of the rim is 18 inches;
- Width - 7.5 inches;
- Fasteners - 5 bolts x 114.3 millimeters;
- Departure - 50 millimeters;
- The diameter of the central opening is 67.1 millimeters.
On a note.
IN this case The so-called wheel marking is indicated. On the original it must be knocked out on the inside.
It indicates:
- 5 × 114.3 - the number of mounting holes and the diameter of the circumference of their location, or breaking;
- 7 × 17 - the width of the disk and its diameter, measured in inches;
- ET50 - disk departure, measured in millimeters;
- d67.1 - the diameter of the hub, also indicated in millimeters.
The wheel departure is the distance between the planes of the application to the hub and the central axis. This parameter is maximally important for calculating the steering characteristics and chassis.
Mazda CX-5 The departure parameters are indicated by the vehicle manufacturer and must be strictly observed. Deviation in one direction or another entails the change in loads on running part. This may lead to a change in the sensitivity of the steering and possible emergency situations.
The diameter of the hub indicates the size of the central opening of the disk. It is measured in millimeters. If the selected wheel kit has a larger diameter, then special transition rings must be purchased. Often they come in the kit.
Note!
Any deviations from the specified factory sizes can affect the steering characteristics and suspension wear.
Parameters for "Six"
As for Mazda 6, which was released in 2008, then when selecting disks, the car takes into account:
- The diameter of the rim, which is measured in inches.
- The rim width is also in an inch system.
- Departure, measured in millimeters. This is the distance from the vertical axis of symmetry to the plane of the touch of the hub and the disk.
- The number of holes for fastening with nuts and bolts, or just a break.
- Hub hole and its size. Marking as DIA and is the diameter of the central opening. Measured in millimeters.
Taking into account all the sizes and parameters, you can highlight the marking of the wheels:
- Breakdown, standard for japanese manufacturers- 5 × 114.3.
- The width of the disk - 6.0, 7.0 and 7.5 j, depending on the radius, is measured in inches.
- Disk departure - ET from 50 to 60 depends on the width, measured in millimeters.
- The diameter of the central opening for the hub - D 67.1 millimeters.
Engineers of Mazda for most model Row A breakdown parameter was selected equal to 5 × 114.3.
It makes it easy to choose wheel disks From a wide range of markets. There is an opportunity to choose both original products and products of various brands. The choice of size in width and diameter depends only on personal preferences of the car owner. These sizes are floating and can change. Data breakdown and diameter of the central hole is not recommended.
