Home Generator What a breakdown to Kia Rio. Disk breaks on Kia Rio How to determine the regular sizes of tires and disks

Generator

What a breakdown to Kia Rio. Disk breaks on Kia Rio How to determine the regular sizes of tires and disks

Surely you agree that the car will be much better to look if there are original design discs on it. That is why many car enthusiasts seek to replace regular discs to others - more perfect and attractive. However, in such a kind of tuning you need to scrupulously approach the technical parameters of the wheels. The main characteristic on which attention should be paid is a break. In this short article, you will learn to break the wheeled disks of the popular car KIA LED of different years of release.

Almost the first cars, which saw mass production and were loved by the domestic motorist. They were produced with two wheel diameters:

The above data refer to machines that are completed with engines:.

Drilling Kia Ceed 2010

This year, the car was subject to refinement and some changes. Auto this period is quite popular and distributed in the territory of the Russian Federation and not only.
This year has been completed with the following wheels:

R15 C tire size 195/65. The disk departure is 47 mm., And its size is 15x5.5.
R16 with tire size 205/55. The disk departure is 51 mm., And the size is 16x6.5.

The above data also belong to models that are equipped with engines: 1,4L; 1.6 CDRI; 1,6L; 2,0L CRDI.

All other options were issued with the following characteristics:

Disc size 15 × 6.0, departure 45 mm., Tire size 185/65R15;
15 × 6.0 disk size, departure 45 mm., Tire size 195/65R15;
15 × 6.0 disk size, departure 45 mm., Tire size 205/60R15.

For all these sets, the breakdown is 5 × 114.3

Kia Ceed 2013

The line was improved, but the production of cars this year was produced only with two versions of the engines:

Kia LED 1.4.
Kia LED 1.6.

The first option was completed with wheels with a disk size 15 × 6.0, departure 45 and tire size 195/65R15.

Second version - Disc size 16 × 6.5., departure 46 and tire size 205/55R15.

Both configurations have a breaking equal to 5 × 114.3.

It is worth noting that all cars of this model of different annual releases have the same drilling (5 × 114.3), so it is almost impossible to be mistaken in its selection. The only thing you need to pay attention to the sizes of tires and other parameters.

Virtually the entire range of KIA cars is incredibly popular with drivers both our country and around the world. Kia is distinguished by the convenience and reliable technical characteristics. But on cars of this brand, for various reasons, sometimes you have to change the wheels. The article will be told about the peculiarities of the replacement of wheels and breaks on the Kia Rio cars and other machines of the KIA model range.

The Kia Rio car is the most popular and common model among the entire KIA line. The owners "Rio" change the wheels during damage, as wear, and also replace the factory stamped discs to the cast-chosen by them. To do this, you always need to know the exact data on the timing of the wheels of the model and other parameters of its running part.

Tabs Kia Rio.

When the wheels are breaking to "Kia Rio", as well as on any other car, drivers need to accurately calculate the ratio of fastening bolts to the rim diameter. It is possible to measure yourself independently (using a special device) or use the ready-made models.

On a note.

The brazing "Kia Rio" regardless of the year of release of the machine has a single value: 4 per 100, that is, 4 mounting holes and 100 - diameter (in mm) of their location relative to the axis of rotation of the wheel. Models of different annual releases differ only in disk sizes and departure sizes.

Tools on "Kia Rio 1"

Due to the simplicity of management, long-term and comfort, Kia Rio of the first generation became incredibly popular. The demand for the model has decreased with the appearance of the following generations "Rio", but meanwhile, it is also a pedestal on domestic roads.

All generations of Kia Rio have a single breakdown 4 per 100. It is very rarely a breakdown 4 on 98. Refine parameters in the instruction manual. The departure of the disk or em in this modification is from 32 to 40 mm. Hole in diameter no more than 54.1 mm. The diameter of the disk on the first model is 15-16 inches.

Tools on "Kia Rio 2"

The second generation models that have been produced from 2005 and until 2011 have a typical breakdown for KIA.

They differ only in the width and diameter of the disk: the factory has a width of 5.0 to 6.5. The diameter of the disk is a period of 14 to 16 inches.

Tabolovka on "Kia Rio 3"

With the release of the third generation Kia took care of car owners. The third generation models have a special labeling with the indication of all data.

At the modifications of 2013-2014, there is an inscription "6J R15 RSD 4x100 ET48 DIA54.1". The width of the disk is 6 inches, and the radius is 15. The break is 4 to 100, the disk departure is 48, the hole in diameter is 54.1. The breakdown "Kia Rio 3" is almost the same as other generations. The model was made from 2012 to 2016. The size of the disks for the third-generation model Kia Rio is from 14 x 5.5 to 17 x 5.5.

What is the drying wheels on Kia cars

Other representatives of the KIA model range (Ceed, Sorento, Soul and Sortage models) also have its own specificity in the wheels of the wheels. On some models, it often depends on the year of the machine or its generation. Below will be discussed on the most common KIA models on domestic roads.

Kia LED 2008

On a note.

KIA CEED 2008 release is the first batch of serial cars of this model. Immediately after reaching the conveyor to the market, they were loved by drivers all over the world. The breakdowns "Kiya LED" differ depending on the year of their release.

In the first Kia Ceed breakdown - 5 × 114.3. The diameter of the hole in all modifications is 67.1 mm. Departures in the factory unit - 47 mm, are also allowed 51 and 56.

The model was produced with two diameters of wheels:

R15 with tires 195/65, departure disk 47 mm, disk size - 15x5.5.
R16 with tires 205/55, departure disk 51 mm, size - 16x6.5.

Drying Kia Ceed

Drivers often change discs on this model instead of full-time factory, setting interesting alloy wheels with a suitable size and breakdown.

When replacing wheel drives, it is necessary to know the exact data of the "Kia LED" breakdown, the year of its release and the data in the data in the machine's technical documents.

"Kia Sportage 3"

The compact urban crossover from Kia in the third generation was produced in the period from 2010 to 2015, this modification "Sportage" is still loved by many drivers. Replacing wheel elements After purchase for removing stamped discs from the factory configuration for purchased cast or forged.

When replacing disks and tires by car "Kia Sportage 3", it is recommended to adhere to the full-scale sizes of the manufacturer:

Disks	Tires
6.5JX16, ET 31.5, Dia 67.1, PCD 5x114.3	215/70 / R16
6.5JX17, ET 35, Dia 67.1, PCD 5x114.3	225/60 / R17
7JX18, ET 40.5, Dia 67.1, PCD 5x114.3	235/55 / \u200b\u200bR18

Attention!

The deviation from the factory norms can lead to changes in the characteristics of the car - dynamics, stability, fuel consumption, etc.

KIA SPORTEGE 3 PCD 5 × 114.3 car breaks 5 × 114.3. Provides 5 mounting bolts and the diameter of the circle on which the holes are located under them, 114.3 mm. On the car of this brand, discs with a diameter R16, R17 and R18 are installed.

The following wheels are installed on CAI Sportage 3 cars:

Modifications	Disc parameters			Tires
hub	basic	replacement options	base	replacement options
1.6 GDI	67,1	6.5JX16 5/114.3 ET 31.5	6.5JX16 5/114.3 ET 36 6.5JX17 5/114.3 ET 35 6.5JX17 5/114.3 ET 40	215/70 R16	215/70 R16 225/60 R17
1.7 CRDI; 2.0 CRDI; 2.0 CVVT; 2.0i	67,1	6.5JX16 5/114.3 ET 31.5	6.5JX16 5/114.3 ET 36 6.5JX17 5/114.3 ET 35 6.5JX17 5/114.3 ET 40 7JX18 5/114.3 ET 40.5 7JX18 5/114.3 ET 42.5 7JX18 5/114.3 ET 45	215/70 R16	215/70 R16 235/55 R18.
2.0 Turbo.	67,1	7JX18 5/114.3 ET 42.5	7JX18 5/114.3 ET 40.5	235/55 R18.	235/55 R18.
2.4i	67,1	6.5JX16 5/114.3 ET 31.5	6.5JX17 5/114.3 ET 35 7JX18 5/114.3 ET 40.5 7JX18 5/114.3 ET 42.5	215/70 R16	225/60 R17 235/55 R18.

Kia Cerato

The breakdown "Kia Cerato" is considered depending on the year of the vehicle.

This mid-class car from Kia is produced since 2004 to this day, reaching the fourth generation. This sedan is also incredibly popular among KIA, having survived the appearance of Ceed created by him for replacement.

Kia Ceed

Each generations of the Kia Cerato car, depending on which year the car was released, his type of breakdown:

Kia Cerato 1 (LD) (2003-2008) has a break (PCD) 4 × 114.3,departure (ET) - 43-43 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with nuts with M12 x 1.5;
Kia Cerato 2 (TD) (2008-2013) has a break (PCD) 5 × 114.3, with departure (ET) - 41-50 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with nuts with M12 x 1.5 ;
Kia Cerato 3 (YD) (2013-2018) has a break (PCD) 5 × 114.3, with departure (ET) - 46-50 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with nuts with M12 x 1.5 ;
KIA Cerato 4 (BD) (2018-2019) also has characteristics with a breakdown (PCD) 5 × 114.3, with departure (ET) - 41-50 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with thread nuts M12 x 1.5.

On a note.

Also, depending on the year of release within the modification and dimensions of the discs, the breakdown may differ.

Hub on the Kia Ceed car

Rubber size for Kia Sorento

The Kia Sorento model is another medium-sized crossover from KIA.

The rubber on it changes when changing seasons, as tires wear, switch to another tire model. Depending on the region of operation of the car, weather and natural conditions, it is worth choosing the type of tires exploited - all-season, summer, winter.

Winter tires are also selected depending on natural and weather conditions, roads for which you have to ride. For the track, ice and snow porridge on the roads, winter studded tires are perfect, for the conditions of the city, frictional "velcro" will be more convenient.

Controlling Kia Sorrento.

How to choose the right size

For the correct selection of tires for Kia Sorrento, it is necessary to correctly pick up the size of the auto strokes.

In the factory configuration, the manufacturer sets the size of 235/65 R17. In addition, on Sorrento, it is possible to set the rubber of larger diameter: R18 and R19. It is possible only in the summer season.

Friction and studded winter tires on Kia Sorento are better to use according to the manufacturer's recommendations. Considering that the size of the tires recommended by the manufacturer (R 17) is quite common, the desired size of the tires is always possible. This size is usually present in the outlets of tire dealers.

Rubber for Kia Sorento

Attention!

When choosing the size of the tire, you must know exactly the parameters suitable for this car.

All Kia Sorento models have 5 × 139.7 breaks.

Another important point when choosing the right size of rubber is the purchase of original tires. It is explained by the fact that the replicas sold in the market and fakes often do not have a declared quality producer, while the sizes may also not come up. It is important to buy autoresuin from an official dealer.

Dzabolovka "Kia Soul"

Kia Soul.

Kia Soul All years of release has a breakdown of 5 × 114.3. On the wheels of different years of models are installed:

For cars 2008-2014 release

Modifications	Disc parameters			Shin profile
hub	basic	replacement options	base	replacement options
1.6 CVVT; 2.0 CVVT; 1.6 CRDI; 1.6i; 1.6 CRDI; 1.6 GDI	67,1	6JX15 5/114.3 ET 44	6.5JX16 5/114.3 ET 51 7JX18 5/114.3 ET 54	195/65 R15	205/55 R16 225/45 R18.
2.0i	67,1	6.5JX16 5/114.3 ET 51	7JX18 5/114.3 ET 54	205/55 R16	225/45 R18.

For cars release 2014-2019

Modifications	Disc parameters			Shin profile
hub	basic	replacement options	base	replacement options
1.6 CRDI; 1.6 GDI; 1.6 MPI; 2.0 GDI	67,1	6.5JX16 5/114.3 ET 47	6.5JX17 5/114.3 ET 51 7.5JX18 5/114.3 ET 55	205/60 R16	215/55 R17 235/45 R18
EV	67,1	6.5JX16 5/114.3 ET 47	Without options	205/60 R16	Without options

Drilling Kia Soul.

In other words, various wheels were used in different generations. This information can be clarified in the service book or technical documents of the car. When changing wheels, disks and rubber, it is necessary to refer to these numbers.

The hubs of wheels of different models of KIA in different years of release differ in the size of the breakdown. Change rubber, wheels and wheels on KIA must be based on this data.

The Kia Rio car began to gain popularity in our country since the beginning of the 2000s, and until the present moment remains one of the most practical sedans that are successfully sold in the class "B". Thanks to the pricing policy of the Korean company, the queues for cars Kia Rio lined up seriously. Especially model 2013,2014, which received a new body. Therefore, it is not surprising that a huge number of cars of this model challenges through the streets of our cities. Each owner of Kia Rio wants to highlight your car from hundreds of others.

Therefore, more and more drivers pay their attention to a shallow external tuning, and in particular, to replace regular discs. It seems to be simple - I took and replaced. But it turns out that the disks of wheels on the Ki Rio and the replacement of them to more original - the process is not entirely simple.

Definition of wheel parameters

Factory indicators for wheels Kia Rio

When choosing discs for wheels of your car, first of all, it should be paid attention not to their attractive appearance, but by a number of parameters that they must match. The main value was always breaking the wheels. But first you need to know exactly the dimensions and not be confused in marking. In principle, everything is simple. All discs have standard labeling that matches its parameters. All cast and stamped wheels have the same standards. Factory indicators for wheels Kia Rio, depending on the modification, are shown in the table.

Car KIA Rio 2013, 2014 has a disk in the database with the following parameters that are encrypted in such marking - 6J R15 PCD 4x100 ET48 DIA54.1. This set of figures and Latin letters speaks of the following:

6 - Width of the disk, inches. (parameter B);
15 - disk diameter, inches. (parameter D).

PCD 4x100 - indicates the number of holes and the diameter of the circle along which their centers are located. Actually, this is called a breakdown. Kia Rio has 4 bolts located in diameter 100mm. This parameter for the European standard is marked as PCD (Pitch Circle Diameter).

ET48 - disk removal specified in millimeters. This parameter is measured between the dial surface of the disk and the disk center in width. If these planes coincide, then the removal of the disk is zero. According to the European Standard, the Kia Rio disk has a positive disk removal at a distance of 48mm. English manufacturers indicate this size "offset", A "Deport" - the French designation.

Disk removal, just like the wheels disk breaking is a key factor when installing a new disk. If a new disk has a negative parameter, most of the wheel protrudes and when turning will be raised by the arc of the wheel. With too much value of this parameter, the installation of the disk will be impossible, since the supports and suspension levers simply do not allow it to be installed.

Determination of the breakdown

The breakdown of the standard disk Kia Rio is quite easy to determine independently. The determination of the number of holes will not be much difficulty even for a preschooler. RIA is 4. The diameter of the circle on which they are placed (PCD parameter) is not so simple, but it is very possible. If you use the following scheme, then the definition of the breakdown will take less minute. Here she is.

Diagram of definition of raspberry

From this scheme, everything is extremely clear, except for N. The intercentrons of the holes is very simple. Measure the caliper distance between the walls of the holes standing near the holes and add the diameter of the mounting hole to this size. Taking advantage of the simplest formula shown in the diagram, we get the size of the PCD, which we call the breakdown.

But it is not necessary to treat such a thing as wheels are frustrated, as it directly affects the safety of motion and the technical condition of Kia Rio. Judge for yourself. If you deviate from the value of the exact breaks, the wheel will be installed along the axis not exactly, which will lead to an insufficient moment of tightening bolts. Visually can not be noticed, and the consequences may not be the most pleasant. The inconsistency of the parameters can cause a hardly noticeable beating of the wheels, which will eventually disable the pendant details of your KIA Rio. Excessive vibration may well reflect on the steering mechanism.

If you decide to replace the full-time disks to the original you like, pay attention not only to what they have a break, but also on the material from which the discs are made. They must be durable, the lungs and the manufacturer should not be in doubt as manufacturing.

Watch an interesting video on this topic.

Drivers who decided to replace the wheels must accurately calculate the ratio of fastening bolts to the rim diameter. You can measure the ratio on your own (using a special instrument) or use the ready-made data on a specific model.

Indicators that affect the correct wheel installation:

The number of incisors (LZ);
Distance between holes;
The diameter of the arc on which they are located (PCD);
The diameter of the central window (DIA);
Departure.

What is disks break?

The breakdown is determined by the ratio of bolts, with which the discs are attached to the full diameter of the circle. According to the standard, it is customary to consider the norm 5 to 112 ratio. Accordingly, the first figure is an indicator of the bolts, and the second - wheels where the bolts are attached. For each individual car it is customary to calculate the breakdown separately, taking into account the number of bolts, diameters and other factors.

To perform the calculations you need to know the size of the wheels. Discs can be classified according to the following criteria:

The rim width (ensures reliability of support).
Departure (or ET).

Dissaker at Kia Rio 1

The first model of KIA has become very popular due to the simplicity of management, long-term, elevated comfort. Kia Rio is less popular than models 2 and 3 generations, but still on Russian roads sometimes meet.

To transform Kia Rio, you can replace outdated wheels for a new kit or follow a non-traditional path and get tires more in diameter and other design. The car will look much more spectacular and brighter. When choosing a new "shoe" for KIA, pay attention to such indicators:

The models of Kia Rio I have one common feature regardless of the year of release - a breakdown 4 per 100.

Discs 4 to 98 for Kia Rio 1 are far less frequently. To accurately determine the diameter, you should look into the instruction manual, which is attached to the machine. The minimum inconsistency can lead to the emergence of technical problems, as well as to an increase in fuel consumption.

Models released from 2000 to 2005, a circle of at least 15-16. For some options, drivers acquire 17 diameter, but necessarily in combination with a low-profile tire.

Reading time: 6 minutes

Tabs Kia Rio.

Tools on "Kia Rio 1"

Tools on "Kia Rio 2"

The second generation models that have been produced from 2005 and until 2011 have a typical breakdown for KIA.

They differ only in the width and diameter of the disk: the factory has a width of 5.0 to 6.5. The diameter of the disk is a period of 14 to 16 inches.

Tabolovka on "Kia Rio 3"

What is the drying wheels on Kia cars

Kia LED 2008

In the first Kia Ceed breakdown - 5 × 114.3. The diameter of the hole in all modifications is 67.1 mm. Departures in the factory unit - 47 mm, are also allowed 51 and 56.

The model was produced with two diameters of wheels:

R15 with tires 195/65, departure disk 47 mm, disk size - 15x5.5.
R16 with tires 205/55, departure disk 51 mm, size - 16x6.5.

Drying Kia Ceed

When replacing wheel drives, it is necessary to know the exact data of the "Kia LED" breakdown, the year of its release and the data in the data in the machine's technical documents.

"Kia Sportage 3"

When replacing disks and tires by car "Kia Sportage 3", it is recommended to adhere to the full-scale sizes of the manufacturer:

Disks Tires 6.5JX16, ET 31.5, Dia 67.1, PCD 5 × 114.3 215/70 / R16 6.5JX17, ET 35, Dia 67.1, PCD 5 × 114.3 225/60 / R17 7JX18, ET 40.5, Dia 67.1, PCD 5 × 114.3 235 / 55 / R18.

The following wheels are installed on CAI Sportage 3 cars:

Wine modifications Basic replacement options Basic replacement options 1.6 GDI 67.1 6.5JX16 5/114.3 ET 31.5 6.5JX16 5/114.3 ET 36

6.5JX17 5/114.3 ET 35

6.5JX17 5/114.3 ET 40

215/70 R16 215/70 R16

1.7 CRDI; 2.0 CRDI; 2.0 CVVT; 2.0i 67.1 6.5JX16 5 / 114.3 ET 31.5 6.5JX16 5/114.3 ET 36

6.5JX17 5/114.3 ET 35

6.5JX17 5/114.3 ET 40

7JX18 5/114.3 ET 40.5

7JX18 5/114.3 ET 42.5

7JX18 5/114.3 ET 45

215/70 R16 215/70 R16

2.0 Turbo 67.1 7JX18 5 / 114.3 ET 42.5 7JX18 5 / 114.3 ET 40.5 235/55 R18 235/55 R18 2.4i 67.1 6.5JX16 5 / 114.3 ET 31.5 6.5JX17 5 / 114.3 ET 35

7JX18 5/114.3 ET 40.5

7JX18 5/114.3 ET 42.5

215/70 R16 225/60 R17

Kia Cerato

Kia Ceed

Each generations of the Kia Cerato car, depending on which year the car was released, his type of breakdown:

Kia Cerato 1 (LD) (2003-2008) has a break (PCD) 4 × 114.3, departure (ET) - 43-43 mm, the diameter of the central hole (DIA) - 67.1 mm, is attached to the hub with nuts with M12 x 1.5 thread;
Kia Cerato 2 (TD) (2008-2013) has a break (PCD) 5 × 114.3, with departure (ET) - 41-50 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with nuts with M12 x 1.5 ;
Kia Cerato 3 (YD) (2013-2018) has a break (PCD) 5 × 114.3, with departure (ET) - 46-50 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with nuts with M12 x 1.5 ;
KIA Cerato 4 (BD) (2018-2019) also has characteristics with a breakdown (PCD) 5 × 114.3, with departure (ET) - 41-50 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with thread nuts M12 x 1.5.

Rubber size for Kia Sorento

Controlling Kia Sorrento.

How to choose the right size

Rubber for Kia Sorento

All Kia Sorento models have 5 × 139.7 breaks.

Dzabolovka "Kia Soul"

Kia Soul All years of release has a breakdown of 5 × 114.3. On the wheels of different years of models are installed:

For cars 2008-2014 releaseWall modifications Basic replacement options Basic replacement options 1.6 CVVT; 2.0 CVVT; 1.6 CRDI; 1.6i; 1.6 CRDI; 1.6 GDI 67,1 6JX15 5/114.3 ET 44 6.5JX16 5/114.3 ET 51

7JX18 5/114.3 ET 54

195/65 R15 205/55 R16

2.0i 67.1 6.5JX16 5 / 114.3 ET 51 7JX18 5/114.3 ET 54 205/55 R16 225/45 R18

Wall modifications Basic replacement options Basic replacement options 1.6 CRDI; 1.6 GDI; 1.6 MPI; 2.0 GDI 67,1 6.5JX16 5/114.3 ET 47 6.5JX17 5/114.3 ET 51

7.5JX18 5/114.3 ET 55

205/60 R16 215/55 R17

EV 67.1 6.5JX16 5/114.3 ET 47 without options 205/60 R16 without options

The hubs of wheels of different models of KIA in different years of release differ in the size of the breakdown. Change rubber, wheels and wheels on KIA must be based on this data.

The number of models produced at the moment is: 7 units.

Common Disc Prameters:

disk 15 × 6.0: diameter 15 "(38.1 cm), width 6.0" (15.2 cm).

Marking Subtleties:

Sometimes there is a letter j in the marking, for example: 7.5JX16, the sign indicates the shape of the disc root and for the ordinary user information does not bear.

ET - disk departure. The smaller the departure - the more the disk acts outside, the more - the deeper is recessed.

Sign x. means that the disk is inseparable.

Important: Detailed data on the parameters of the disks for all models and the goves of the release is collected in the table below.

1. D. - disk diameter in inches;
2. x. - a sign that means disk inseparalism;
3. B. - Width of the disk in inches.

ET (mm)
Departure disk

1. Distance between the vertical plane of the wheel symmetry and the plane of the disk application to the hub.

PCD (mm)
Drilling disc

1. Number of bolt holes;

2. The diameter of the circle on which the fasteners are located.

Dia (mm)
Central hole

1. The diameter of the central opening, the other marking - the Central Committee.

Warning: Despite the fact that the data is the official figures of the manufacturers, the above information is reference, and does not guarantee unambiguous accuracy.

Cars Kia Rio for more than fifteen years have been in constant demand and popularity among Russian car enthusiasts. Thanks to the democratic pricing policy of the manufacturer, good technical specifications and attractive appearance, in the Kia car dealers of our country, even lines of the buyers who want to become owners of Rio.

There is nothing surprising in the fact that every owner Kia Rio wants to highlight his car from thousands of others. The easiest way to do this is the replacement of regular disks.

How to determine the parameters of wheels Kia Rio

When choosing new wheels for your Rio, first of all, it is necessary to pay attention not to their appearance, but on the parameters that they must match. In principle, nothing complicated here is not, since all discs have standard labeling. For example, KIA Rio 2013-2016 cars have a disc in a dowel, whose marking is as follows 6J (disk width) R15 (disk diameter) PCD 4x100 (number of holes, the diameter of the circle to which their centers are located) ET48 (disk removal, mm) DIA54.1.

Bulleting wheel

The rabbit of standard disks Kia Rio will be able to identify even a novice driver. In all Rio models of them 4. To measure the interconnect distance of the holes can be using a caliper. Next, simple calculations are carried out that allow you to get the PCD parameter itself, which is the name of the breakdown.