The article will dismant over wipers on Renault Logan.:
- frameless;
- hybrid and frame;
- premium and available options.
Bonus: Price comparison and video installation. In the selection - only reliable European and American manufacturers.
The wipers are selected for two generations of cars. You will find recommendations on frameless and frame brushes. I turned on premium options - brushes with excellent value for money, as well as inexpensive wipers.
More articles will allow to avoid compromises in the form of several centimeters of the length of the broth - choose only what is done specifically for your car.
Logan of the first generation (2004-2013)
Characteristics:
- The length of the "native" driver's wiper is 50 cm (20 inches).
- The length of the "native" passenger janitor is 50 cm (20 ").
- Fastening type - "Hook" (in English Hook).
Frameless wipers on Logan I
- First of all, I recommend the kit frameless glass wipers Premium-class Bosch Aerotwin AR 500 S (Article - 3397009081). This is a set of two Belgian brushes 50 cm long with a "native" fastening. Silent and aerodynamic, they are perfectly clean at any temperature and weather.
- An excellent and more accessible option is the KAMOKA (27E17) kit with janitors of the same size and also "native" fasteners, no multi-adapters. These are frameless Polish wipers, quiet, reliable, aerodynamic.
- A good option is a pair of Shampion Easyvision Retrofit (ER50 / B01). Please note that they must be bought two pieces. These are high-quality American wipers for which the most important thing is great work in the rain.
Hybrid wipers on the Logan of the first generation
Therefore, they are affordable at the price of most frameless competitors. They look impressive, perfectly clean, and produce them in Korea.
Frame wipers on the Logan of the 1st Generation
- Classic frame brushes with a number of 26,500, are sold piece.
- Good piece option - Champion Easyvision Conventional E51 (E51 / B01).
- Perhaps the most accessible known brand frame wipers - This is the Bosch Eco 500C kit (3397005161).
"Non-" sizes of janitors on Logan
Many owners put longer brushes to increase the cleaning area and get rid of the residual leather ("snot").
Some even put longer brushes, but with refinement of leashes.
If you want to experiment with wiper lengths, I would recommend the wipers to the specified length.
- frameless brush Champion Easyvision Retrofit (ER51 / B01),
- rainblade frameless (358349),
- frame Valeo Silencio Britister (567774).
- frameless Valeo Compact Revolution R53 (576077),
- frameless Champion EasyVision Retrofit (ER53 / B01),
- frameless Bosch Aerotwin Retrofit Ar 21 U (3397008536),
- hybrid DENSO (DUR-053L),
- camery Champion Aerovantage (A53 / B01),
- frame with SWF Das Original 607 (116607) spoiler (116607),
- bosch ECO 53c frame (3397004671).
Wiper on Logan II (C 2012)
Characteristics:
- Years of release: 2012, 2013, 2014, 2015, 2016, 2017.
- Length of the driver's wiper: 550 mm (22 inches).
- Passenger Wiper Length: 500 mm (20 ").
- Type of fastening C 2012 to 2015 - "Big Hook" (in English Hook 9 * 4).
- Fastening type C 2015 - Bayonet ARM.
Quick comparison for Logan 2nd generation with fastening "Hook"
Look interesting video According to this topic
Renault Logan cars in Russia are included in the top 5 most popular models on the market. However, existproblem. It lies in the basic brushes of windshield. Of course, in the first time of operation, few people pay attention to this annoying, but after the expiration of time it becomes an annoying problem for loganovers.
How to get rid of such defects and upgrade the system of work of the janitors below in our article.
Problem with brutators
After some time since the start of operation, car enthusiasts notice a very unusual feature when working wiper. The thing is that on most popular foreign cars they work simultaneously with the washer windshieldHowever, everything is different on Logan. When turning on the janitors, the nozzles of glass washers do not serve water. And this is not a problem in the pump, which is on the washer tank, this is such a feature of work.
Of course, this version of the work has its supporters, but the absolute majority of loganovers converge to one that such exploitation is inconvenient and requires refinement. The benefit of the solution to this problem is, only instructions are required, a small experience and the required amount of wiring.
Another unpleasant "surprise" for owners of Renault Logan is stable size Windshield wiper brushes. Its length - 55 centimeters, both from the driver's and passenger side.
Therefore, when working, they capture only a small part of the glass surface, leaving the rest of the sections. This may seem a small problem, however, when the precipitation is lost, it is precisely on such untouched areas, moisture flows from the glass, which in turn causes discomfort. Among motorists, this situation was called - the effect of "snot".
What are the wipers to choose on Renault Logan?
To date, on the Internet there are many open topics in the forums about the problem of glass wipers on Renault Logan. One of the most popular answers to the solution of this problem is to replace the full-time janitors on the details of another size.
The ideal size of the janitor from the driver's side is 65 centimeters, and the passenger has 55 cm.
Depending on the manufacturer, the size may be slightly different, but the regularity is one, length from the driver's side should always be greater.
Step-by-step process of replacement of janitors
Raise the wiper lever and exhibit the janitor in a horizontal position. Further:
- Click on the lever of the janitor's lock.
- It is enough to attach only a small effort and the paw of the lock will come down from its place.
- Removed brush should be replaced with a new one.
- Install a new brush before clicking on the retainer.
Please note that when installing frameless brushes, a special adapter may be required (which in most cases is included).
We carry out the modernization of trapezium thrust
The process of changing traction on the trapezium is a rather complicated process that takes your strength and time. But it is only worth conducting all this work as the "snot" effect is guaranteed to disappear.
In order to carry out similar manipulations, you will need a hand tool, a welding machine, direct hands and exact following our instructions.
- Open the hood and remove the plastic piston at the protective grille.
- With a flat pumping, it is necessary to carefully puss the piston.
- Having attached a small effort of a plastic grid and the seal will come off from their own place.
- In order for the nut to rip it easier, you can pre-process its WD-40.
- Remove the plastic protection, going down it from the rebreak.
- Contact is better to disconnect with a flat screwdriver sting.
- The screw fastening screw can easily be unscrewed using the end head to "10".
- Cut off the part of the thrust is best with the help of a hacktone.
After this work, it is possible to be sure that the brushes of wind polar sheets Renault Logan, will wipe the majority of the glass, without leaving the extra tracks.
Watch an interesting video on this topic.
Renault Logan cars in Russia are included in the top 5 most popular models on the market. High reliability, efficiency and attractive appearance Very impressed to our consumer. As they say: it does not make mistakes only the one who does nothing! This allegory just belongs to manufacturers of Renault Logan.
A little - a lot, the problem is in the basic brushes of windshield. Of course, in the first time of operation, few people pay attention to this annoying, but after the expiration of time it becomes an annoying problem for loganovers.
How to get rid of such defects and upgrade the system of work of the janitors below in our article.
Problem with brutators
After some time since the start of operation, car enthusiasts notice a very unusual feature when working wiper. The thing is that on most popular foreign cars they work simultaneously with the windshield washer, but it turns out everything else on Logan. When turning on the wipers, water does not serve. And this is not a problem in the pump, which is such a feature of work.
Of course, this version of the work has its supporters, but the absolute majority of loganovers converge to one that such exploitation is inconvenient and requires refinement. The benefit of the solution to this problem is, only instructions are required, a small experience and the required amount of wiring.
Another unpleasant "surprise" for owners of Renault Logan is the regular size of the windshield wiper brush. Its length - 55 centimeters, both from the driver's and passenger side.
Therefore, when working, they capture only a small part of the glass surface, leaving the rest of the sections. This may seem a small problem, however, when the precipitation is lost, it is precisely on such untouched areas, moisture flows from the glass, which in turn causes discomfort. Among motorists, this situation was called - the effect of "snot".
This is how the result of standard work of wipers looks like.
And so when modernization is performed. As can be seen, the triangle on which the whole dirt disappeared.
What are the wipers to choose on Renault Logan?
To date, on the Internet there are many open topics in the forums about the problem of glass wipers on Renault Logan. One of the most popular answers to the solution of this problem is to replace the full-time janitors on the details of another size.
The ideal size of the janitor from the driver's party 65 centimeters, and a passenger 55 cm.
Depending on the manufacturer, the size may be slightly different, but the regularity is one, length from the driver's side should always be greater.
Step-by-step process of replacement of janitors
Please note that when installing frameless brushes, a special adapter may be required (which in most cases is included).
We carry out the modernization of trapezium thrust
The process of changing traction on the trapezium is a rather complicated process that takes your strength and time. But it is only worth conducting all this work as the "snot" effect is guaranteed to disappear.
In order to carry out similar manipulations, you will need a hand tool, a welding machine, direct hands and exact following our instructions.
- Open the hood and remove the plastic piston at the protective grille.
With a flat pumping, it is necessary to carefully puss the piston.
- Then remove the hood seal and the plastic grille with a closing motor with a wiper gyling.
Having attached a small effort of a plastic grid and the seal will come off from their own place.
- After accessing access to the bricks, remember the approximate location of the janitors to subsequently install them in their places. You can make a mark with marker.
- We unscrew the nuts and remove the washers from the leashes of janitors.
In order for the nut to rip it easier, you can pre-process its WD-40.
- To remove the leashes themselves, they must be sought from side to side and pull themselves.
- Remove the plastic overlay and unscrew the nut with the puck from the pin.
Remove the plastic protection, going down it from the rebreak.
- Remove the power connector of wipers.
Contact is better to disconnect with a flat screwdriver sting.
- We unscrew the motor mounting bolt from the case.
The screw fastening screw can easily be unscrewed using the end head to "10".
- Having pulled the lever, dismantle it.
- After the whole trapeze was dismantled, with a passenger traction, we remove the nut and the washer and free it.
- In order for the upgrade to be successful, it is necessary to cut from 5 to 8 mm of metal from the traction, and then welcome the ends with each other.
Cut off the part of the thrust is best with the help of a hacktone.
- After welding, we check everything for the presence of irregularities and grind them.
This is how the thrust looks after the work performed.
- We collect all the details in order similar to the removal, not forgetting to miss all the places of friction with lubricant.
After this work, it is possible to be sure that the brushes of wind polar sheets Renault Logan, will wipe the majority of the glass, without leaving the extra tracks.
The process of removing the engine of janitors with a trapezium (video)
Wiper brushes for french budget car Renault Logan, installed at the factory manufacturer often do not satisfy the requirements of the consumer. However, the market contains many types and data models of accessories. The owner remains to choose the best device based on the size, type and its preferences.
Causes to replace details
The feature of the work of the standard wiper brushes by car Renault Logan is the asynchronous work of the brushes and, which leads many motorists in irritation. Also, the length of the brushes is 55 centimeters both from the driver's side and on the side of the passenger, which does not produce the best way at the level of the review in rainy weather.
Having a small area of \u200b\u200bcleaning glass Renault, standard brushes, in addition to ineffective work, cannot cope with strong precipitation, which can later lead to a road traffic incident.
In the aggregate, these reasons often lead the owner to solve the replacement of standard brushes on the details of another design and manufacturer. The inefficiency of standard parts is described in detail in numerous videos presented on the Internet.
Types of brushes
One of the solutions to the problem of working standard janitors on Renault Logan can be the replacement of a driver's accessory for a longer, better item. Mother-free wipers can be used by car, but the driver's device should always be longer, for more efficient cleansing area of \u200b\u200bglazing.
So the size of the driver's detail for the most efficient work should be 65 centimeters, and the passenger 55 centimeters, it will be the best way to work on the work of the whole design.
This proportion will allow to achieve a greater cleansing area.
On the market automotive janitans There are several types of accessories data, including:
- Frame design of janitors for Logan. This type of parts is installed at the manufacturer's factory and has standard sizeand also widespread in the market. This type first appeared on the market and began to serially mounted on cars. Until recently, he was considered the only one and, accordingly, the most effective. The advantages of this design include low cost and relative reliability, in shape. Negative moments include small efficiency when working in winter time. Due to the shortcomings in the system, the efficiency of working at low temperatures is reduced, and, given the low cost and low-quality rubber, cleaning the windshield can take a long time. On the expensive models In such a performance, rubber products have high quality however, the problems with the efficiency of winter do not disappear.
- Frameless wipers are the next step in the evolution of these accessories. In their design, based on the name, there is no steel framework, which allows you to more effectively clean the windshield with any weather. The obvious and greatest advantage are their clamping properties: unlike frames, the wipers of this form are tightly adjacent to the windshield, which cannot but affect their effectiveness in positive side. Negative parties applies, above all, higher cost.
- Combined janitor system for Logan. This technology includes elements of both frame and frameless brushes. In the market, it appeared relatively recently and is one of the most efficient, but at the same time and the most expensive. The price of famous brands for the brushes of such a system can reach several thousand rubles. Also, in size, they do not differ from the previous models. About their high efficiency can be judged on the basis of a variety of video rollers laid out on the network.
When choosing the type of janitors, the owner relies on its material capabilities and the level of efficiency of data of the devices. The main criterion when choosing should be best quality Products, regardless of the type to which they relate.
Refinement of regular car brushes Logan
The phenomenon of inefficient work of standard parts on this car Spenting its own name - "snot" on the windshield - this means that regular devices, without cope with work in complex meteors, do not completely clean the surface of the windshield. Therefore, many owners prefer to replace the details of their refinement.
The trapezoids and traction details are most often exposed. For refinement, you need to disassemble the entire system of janitors (this will require some tools and repair skills). The dismounting process occurs in several stages:
- to begin, it is necessary to remove the plastic lining under the hood of the car and the cover seal together with the plastic grille closing access to the entire system;
- then it is necessary to dismantle the leashes of janitors and their plastic linings;
- next, you need to turn off the system of the system and unscrew the holding bolt;
- then use the key to dismantle the cleaner lever or the entire system.
After that, it is necessary to mark the location of the cut, (this cutting point must be determined better between traction bends and remove 5-7 millimeters). After cutting, the remaining pieces must be prescribed by welding.
As a result of this time-consuming procedure, the effectiveness of the work of standard devices will increase, and the notorious "snot" will no longer displays the owner. This method is the most time-consuming in repair, the easiest way to remove the entire design using the unscrewing of the two nuts and replace the janitors to new ones.
Also, many owners to increase efficiency are upgraded by a switch located in the cabin. Through the introduction of a relay with a discontinuous pause and the appearance of a new function in the switch, you can solve the standard defect design.
This defect manifests itself when when you click on the switch, the glass washer is triggered later than. IN this case The switch appears in the switch, the system for regulating the system operation of the system, which is very convenient and much better for the owner.
Let's summarize
As a result, the choice of cleaning accessories for the owner is quite complicated. Solving paths There are several, among them both the acquisition and subsequent replacement and modernization of standard devices. The car owner must answer the question of which way it will be suitable for him.
The size of the brushes of the glass cleaner Renault Logan becomes very an important parameter In the event that you decide to replace standard janitors to more modern and perfect. The windshield cleaning system consists of the following structural elements:
- cleaner brushes;
- driver Drive Mechanism;
- mainstroke for washing;
- tank for storing the washing fluid;
- pump for feeding fluid for washing.
For a number of reasons, the installation of new jangers on Logan is one of the most common operations produced by the owners of this model immediately after its purchase. Usually, new wipers cope significantly better with their functions compared to standard windscitters and have a much longer life.
Reason for the replacement of wipers
The main reason for replacing wiper Renault Logan is their strange work, which has long been attributed to the generic "diseases" of the car of this brand.
The fact is that most modern cars are in service with such a windshield cleaning system in which the wipers work synchronously with the glass washer.
The wipers of Renault Logan in the included position do not start into operation the washer, as a result, the cleaning of the glass is made dry until the driver manually starts the device into operation. Naturally, it creates certain inconvenience when driving, since the driver is distracted from the road, which can lead to the smoother consequences.
In addition, the design of standard janitors has another unpleasant feature - these are the same sizes of brushes from both the driver and the passenger. They make up 55 cm. Such length brushes does not allow them to completely clean the windshield of the car, as they simply do not capture a small part of which water accumulates. The fans of Renault Logan even gave a nickname to such a phenomenon, calling his humoring "snot".
Car owners argue that the washer tank is installed here too small, as a result of which the washing fluid in bad weather is rapidly ends. In this case, the removal of the washer tank delivers significant difficulties due to its uncomfortable location.
Choosing new windshields
You can get rid of the listed problems by installing new janitor to the Logan, as well as synchronizing the operation of wiper with the washer. Experienced car owners are advised to acquire data accessories, the size of which will be 65 cm for a driver's seat and 55 - for the passenger. The form, device, the method of attaching janitors at the same time can be any, but remember that their size should be in any case different.
What better wiper wipers for Logan - the question is quite controversial, because each driver chooses the design for itself. So, some like it, when brushes are tougher, others prefer designs that are on the arms of the flaps. However, when choosing data of accessories, one point should always be considered: Renault Logan frame wipers have some problems in winter during operation. This is due to the fact that there can be moisture between their rubber lining and frame.
In this regard, when the janitor is replaced, it makes sense to acquire brushes of frameless design. The fact is that the design that does not have a framework allows you to mount the cleaning surface to a sufficiently complex design with several points of the support, which is called the "rocker". As a result, the brushes do not face the glass, ensuring the constant readiness of the wiper to work.
In addition, frameless wipers are in service with the wear indicator of their brushes. From a technical point of view, such an indicator is a strip, which, as the brushes wear, will change its color.
Frameless brushes, as a rule, are small, tightly pressed against the glass and are in service with spoilers that prevent them from breaking the incident air flow.
Replacing the wiper brushes on Renault Logan is quite easy. The fact is that there is a special latch on the drawing of this device. Turning a specially brush, you can break off the latch and remove it. Installing a new brush is made in the same way. Replacing the wiper brushes of non-standard structures is easy, since the attachment assembly does not differ from standard samples.
At the same time, the main "disease" of regular janitors Logan - "snop" can be defeated, only upgrading the trapezoids, which will allow brushes to capture inaccessible to the standard accessory area of \u200b\u200bthe windshield. At the same time will have to resort to welding work.
To do this, after dismantling, the thrust is cut from 6 to 8 mm metal between the attachment of the thrust and its bend. Next, the remaining pieces are welded among themselves, and the seam is cleaned with irregularities. After that, the thrust returns to the place.
In principle, the refinement data is simple, and they can be made independently, in contrast to the modernization of the glass washing system. So, for example, some craftsmen change the wrath pump, increase the size of its tank, change the nozzles, etc.
Synchronization of the washer with janitor
Modernization of the washing system is a rather complicated procedure, so it is better not to spend it yourself. For example, in this case, you may need to remove the washer tank or replacing the washer nozzles. But to synchronize the operation of the system with the work of the janitors of the car is quite possible. To do this, it is enough just to change the scheme for connecting wipers and glass wrench to electrical wiring.
All terminals and connectors responsible for their work are located in the area of \u200b\u200bthe steering wheel switches. Ideally, you need to connect the comfort unit with a block that is responsible for the work of the mudguard. The result should be 1 wider wave when pressed on the mudguard button, and with a long pressing - 3 squeaks.
If you want to somehow change the characteristics of the washer (for example, changing the shape of the jet produced by him), it will still have to carry out such a procedure as the replacement of the washer nozzles. Replacing the washer tank, it is possible to significantly increase its volume, the possibility of working the glasses to work longer.
In any case, it is necessary to remember that Renault Logan wiper brushes have its own service life and, by its expiration, they must be changed in obligatory to be changed to prevent damage to the windshield.
