Ford focus 3 is a very popular car on Russian market... The car has proven itself from the best side not only due to its driving qualities, comfort and stylish design, but also due to its high reliability. In addition, the owners of such machines have no problems with self-service... And yet, in practice, questions may arise even from experienced motorists... This applies to major malfunctions, and replacement of consumables. So, in the latter case, the most popular procedure is the selection and replacement of engine oil. This task requires some knowledge in theory, but on the other hand, it is available for performing in a garage way. Let's consider in detail how to choose the right oil, and how much to fill in Ford engine Focus 3.
This question is often asked by almost all owners of Ford Focus 3. The fact is that the oil change regulations may differ from the official regulations set by the manufacturer. After all, the replacement frequency also depends on the operating conditions. So, under the influence of unfavorable climatic factors, the oil becomes unusable faster, and therefore, it may need to be replaced earlier than the due date. The official replacement schedule for the Ford Focus 3 is 20 thousand kilometers. It is relevant only for European countries with a favorable climate. V Russian conditions the oil must be changed twice as often so that it does not have time to lose its beneficial properties. Thus, Russian motorists should replace every 10-12 thousand kilometers, or even earlier. For example, if the car is constantly operated in light off-road conditions, and if a variable climate with temperature changes prevails, then the regulations can be reduced to 5-7 thousand km altogether. The more often you change the oil, the better it will affect the reliability of the engine.
Because of what else, the oil quickly deteriorates
In addition to climatic factors, there are other reasons for an urgent engine oil change. Among them, one can single out frequent driving on high revs engine, aggressive driving style, constant driving at high speeds and sharp maneuvers. Ford Focus 3 is a car with good handling and brakes, and yet, with this style of driving, its parts are subjected to enormous loads, as well as engine oil... Its properties quickly lose their beneficial effect, and are no longer able to effectively cool parts and prevent overheating.
Signs of an urgent oil change
To determine if the engine oil is damaged, you need to check its level. If the oil print on the dipstick has a dark tint and smells like burnt, this already indicates an urgent replacement. The same applies if the fluid contains metal shavings, which is one of the causes of mechanical wear.
Choosing oil for Ford Focus 3
When choosing an engine oil, various parameters should be taken into account, especially if the choice is made in favor of an analog oil. Whatever the brand, the product must have the same specifications as the original oil. For example, oil for gasoline Ford motors The Focus 3 has a WSS-M2C948-B specification as well as a 5W-20 viscosity grade. This means that such parameters should be possessed by original oil, as well as its counterpart. So, among the latter, one of the best options for Ford Focus 3 will Castrol Magnatec Professional E.
As for diesel engines, they have the WSS-M2C913-C specification, as well as the 5W-30 viscosity class.
You can choose among other well-known brands, for example Lukoil, Mobile, Shell, Rosneft, Elf, ZIK and others.
Oil type
- Synthetic is the most the best option for Ford Focus 3. High flow characteristics, resistance to low temperatures, good non-stick properties, the ability to effectively cool parts are the key advantages of synthetic oil. Recommended for cars with small and high mileage.
- Mineral is the most available oil today. Suitable only for cars with high mileage, including the Ford Focus 3. Besides, it should be filled only as a last resort, for example, if there is not enough money for pure synthetics. Moreover, such oil is not recommended for use in low temperatures.
- Semi synthetic oil- is a mixture of synthetic and mineral oils... This option is definitely better than a mineral product, but in many respects it is inferior to synthetic oil. Thus, semisynthetics are a more worthy alternative to mineral water than synthetics.
We can conclude that for Ford Focus 3 better fit synthetic oil, and with a lack of funds - semi-synthetics.
How much oil to fill
The amount of liquid to be poured depends on the displacement of the Ford Focus 3 engine.
For example, for 1.5-liter engines, 4 liters of fluid should be filled, for 1.6-liter engines, 4.2 liters are recommended, and more than 5.6 liters of oil are poured into powerful 2-liter engines.
Finally, I must say that the maximum amount of oil can be filled only with a complete replacement, that is, with a comprehensive flushing of the motor. With a partial replacement, it will not be possible to pour in the full volume, since in this case, the remains of the old oil, including dirt and soot, will remain in the engine. Therefore, for a more efficient procedure partial replacement it is desirable to repeat 2-3 times, with an interval of 500-600 kilometers.
Manufacturers offer big choice technical fluids for cars, but do you know what kind of oil to fill in Ford Focus 3? Like any other car, the Ford Focus 3 needs quality consumables... It is about motor and transmission oil... The operation of the car, the frequency of repairs and its service life depend on its quality and timely replacement.
What type of engine oil is best for Ford Focus 3 engine in summer?
First of all, you need to know which engine oil is best to fill in the Ford Focus 3 engine in the summer. The engine is the "heart" of the car, therefore it must not be allowed to malfunction. To do this, you need to take care of timely replacement oils.
Manufacturers recommend an engine oil that meets the WSS-M2C948-B 5W20 specification. In specialized stores, you can buy only one product that meets these requirements - a motor Castrol oil Magnatec Professional E 5W20. The plant is filled with Ford oil Formula F.
What type of oil can be used in an automatic transmission (automatic transmission) Ford Focus 3?
Before answering the question, what kind of oil can be poured into automatic transmission(automatic transmission) Ford Focus 3, you should know the following. The Ford Focus 3 is equipped with a dual-clutch transmission. It combines all the advantages of a machine gun and mechanics. Having high efficiency, it shifts gears as quickly as possible, consuming fuel like mechanical box gear.
What kind of oil is poured into the mechanics at the factory (officials) in the winter for a Ford Focus 3?
For those who are interested in the question of what kind of oil is poured into the mechanics at the factory (officials) in the winter for the Ford Focus 3, the following information will be useful. As already mentioned, manufacturers declare that the oil is filled for the entire life of the vehicle. The factory is filled with original FORD 75W90 synthetic gear oil (article 1 790 199). Despite this, both car owners and auto repairmen state that the oil must be changed after 80-90,000 kilometers. Changing the oil will extend the life of the vehicle. In addition, the procedure itself is simple and cost-effective.
Ford Focus 3 is one of the most dynamic and advanced cars today. A fast-paced vehicle, combined with modern functionality, provides speed, safety, comfort and other service capabilities for both the driver and passengers.
Such about the optimal power of the car in combination with the economy class brand is achieved thanks to the right choice engine oil for internal combustion. In this innovative vehicle, it reduces the frictional forces of sliding sliding surfaces and also serves as a microsealing tool between piston rings and piston rings. Due to that complex dense effect of engine oil, powerful gas pressure is transferred without unnecessary losses to the bottom, and from there to the increased kinetic energy of the car.
In addition, the internal design of the Ford Focus 3 is provided with the help of oil to cool the engine additionally. When processing the fuel entering the engine, thirty percent of the energy is used for forward movement, a small part, together with the exhaust gases, leaves the car, and some of the energy remains and, together with the engine oil and coolant, take care of the protection of the engine components: crankshaft, piston rings and so on.
Advice! Engine oil Ford Focus 3 can be used all-season.
The main thing is that it meets all specification standards and has the correct viscosity grade. The choice must be made consciously and carefully. The company's specialists advise the 5W-30 brand for gasoline engine and 10W-40 for diesel engine... In addition, each grade is characterized by special additives that, when mixed with other arcs, significantly deteriorate the quality of the engine oil. Therefore, it is not recommended to mix different grades with each other, and also not to mix synthetic and mineral motor oil under any circumstances.
If you are thinking of replacing and transferring your engine to a different type of engine oil, then first you need to perform the process of flushing the engine with a special washing oil. To do this, buy a new Fram or Mann, and also flushing fluid Mobil Special or Liqui moly MotorClean.
Also, flushing will be necessary if you notice difficult-to-dissolve resinous deposits on the engine components. The flushing technology can also be carried out with ordinary oil. Only in this case, you will need a more frequent replacement, after about three hundred, five hundred kilometers.
But most importantly, don't buy a fake. The more expensive the oil is, the more likely it is to be counterfeited. It is best to use the services of a registered, official manufacturer's network. The explanation for such advice is that the better the product, the more effective its ability to wash. If it does not get into an ideal engine, then gradually it helps to wash out the formed carbon deposits and lubricates, closes the cracks in the oil seals. And the wear of the piston ring grooves is compensated for over time
The third generation of the popular Ford car was unveiled to the public at the Detroit Auto Show in 2010. A direct follower of its predecessor, the Focus 3 used its redesigned platform combined with a new "kinetic" design featuring broken lines, intricate curves and sharp edges. In addition, the Focus received an updated line of engines with different technical characteristics. Further, it will be considered what kind of oil and how much to pour into these motors.
Under the hood of a sedan, hatchback and station wagon are hidden the same power plants, however, unlike the Ford Focus II, now the basic equipment starts with a 105-horsepower 1.6-liter unit (previously it was a 1.4-liter engine). Gamma power units lost the 1.8-liter modification and now after 1.6 there is an immediate installation with 2 liters and 150 hp. in the asset. The engines have become more economical and consume an average of 5.6 to 6.7 liters of gasoline per 100 km. mixed cycle... They work in tandem with MT or robotic box. Diesel version(140 hp) was available only until 2013, after which, due to lack of demand, the manufacturer abandoned it.
In 2014, Ford carried out a restyling of the Focus 3, as a result of which the car received improved equipment and an updated appearance(redesigned rear and front), as well as a new damping system. The novelty was delivered to Russia with 3 types gasoline engines: one for 1.5 liters (150 hp) and two for 1.6 (105 and 125 hp). In terms of dynamics - a car with a 1.5 engine takes the first hundred in 9.2 seconds (by 1.6 - in 12.4-13.2 seconds), maximum speed- 210 km / h. Today Focus 3 is devoid of simple versions and is a functional, solid and expensive purchase. Price increase for basic configuration led to an increase in demand for the model in the secondary market.
Generation 3 (2010 - present)
Engine Ford Focus 1.6l. Duratec Ti-VCT 16V Sigma 105 and 125 HP
- How many liters of oil in the engine (total volume): 4.1 liters.
- Oil consumption per 1000 km: up to 200 ml.
- When to change the oil: 8000-10000
Ford 2.0l engine. Duratec HE GDI Ti-VCT 150 HP
- What kind of engine oil is filled from the factory (original): Synthetics 5W30
- Oil types (viscosity): 5W-20, 5W-30
- How many liters of oil in the engine (total): 4.3 liters.
- Oil consumption per 1000 km: up to 400 ml.
- When to change the oil: 10000
The selection of the lubricant is made taking into account the parameters of the car engine and its technical characteristics... Poor quality or incorrectly selected car oil leads to many negative consequences. We suggest that you familiarize yourself with the requirements for the recommended engine oil for Ford Focus.
2000 model year
According to the requirements of the Ford Focus vehicle manufacturer, it is preferable to use branded Ford or Motorcraft Formula E greases with a viscosity SAE score 5W-30. In the absence of original motor lubricants alternatively, it is allowed to fill in motor oils with an SAE 5W-30 viscosity index that meet Ford WSS-M2C913-B standards.
The selection of the viscosity is carried out according to scheme 1.
Scheme 1. Dependence of the viscosity of motor oil on temperature environment.
According to scheme 1, it is recommended to use fluids with a viscosity index SAE 5W-30. For topping up, you can use motor fluids SAE 5W-30, 5W-40 or 10W-40 corresponding to the oil type A1 / B1 (preferred) or A3 / B3, depending on the ambient temperature. It is forbidden to use motor oils with a viscosity of 10W-40 if the air temperature is less than -20 0 С.
- Zetec engines - SE 16V 1.4 l:
- 3.75 l, if you take into account the oil filter;
- 3.5 excluding filtering device.
- Motors Zetec - SE 16V 1.6 L, Zetec - E 1.8 L, Zetec - E 2.0 L, Duratec ST 2.0 L:
- 4.25 liters, if you take into account the oil filter;
- 3.75 without oil filter.
- Engines Duratec 8V 1.6 l:
- 4.2 l with oil filter;
- 3.7 without filter device.
- 1.8L Endura-TDDi / DuraTorg TDCi Motors:
- 5.6 liters including the oil filter;
- 5.0 l excluding the filter unit.
Ford Focus Mk2 2004-2011 years of release
Model of 2006 release. According to the manual by the manufacturer Ford Focus, it is recommended to use lubricants meeting the characteristics:
- original Ford or Motorcraft Formula E engine oil;
- viscosity index SAE 5W-30.
- tolerances WSS-M2C913-B.
It is acceptable to use alternative lubricants meeting the requirements of WSS-M2C913-B, having a viscosity of 5W-30.
Also, the following information is indicated in the operating instructions for the car:
- It is forbidden to fill in oils with a viscosity index SAE 10W-40, if the ambient temperature is below -20 0 С.
- In the absence of motor oils that meet the requirements of WSS-M2C913-B, it is recommended to use motor oils with SAE viscosity 5W-30. If it is not possible to purchase the recommended lubricants, you can fill in fluids with a viscosity of 5W-40 (except for machines using Flexfuel) or 10W-40, which, according to ACEA standards, correspond to the A1 / B1 or A3 / B3 oil class. A1 / B1 is preferred.
The amount of lubricant required when replacing is:
- 1.4 L Duratec-16V complete set:
- 3.8 liters with a couple of oil filter;
- 3.5 l excluding the filter unit.
- 1.6 L Duratec-16V complete set:
- 4.1 l with a couple of oil filter;
- 3.75 liters excluding the filter device.
Ford Focus Mk3 2011-2017 years of release
Model of 2015 release. From the operating instructions for the car, the recommended engine oil for Ford Focus is determined by the type of engine. For gasoline engines, it is recommended to use Ford or Castrol 5W-20 engine oils that meet the requirements of WSS-M2C948-B. As alternative lubricants, in addition to 1.0 L Eco Boost (Fox) engines, you can pour motor oils with a viscosity of 5W-30 that meet the requirements of WSS-M2C913-С. In this case, preference should be given to products Ford companies or Castrol.
In the absence of these lubricants, it is allowed to use oils with a viscosity index of 5W-30, corresponding to the ACEA class A5 / B5, as a topping-up.
The amount of engine oil required when changing is:
- For engines 1.0 L Eco Boost (Fox):
- 4.1 l including oil filter;
- 4.0 l excluding filtering device.
- For auto engines 1.6 L Duratec-16V-VCT-Sigma:
- 4.1 l with oil filter;
- 3.75 L without oil filter.
According to the Ford Focus auto manual, for diesel power units it is recommended to pour Ford or Castrol lubricants with a viscosity of 5W-30 that meet the requirements of WSS-M2C913-С.
Conclusion
Recommended engine oil for Ford Focus has a positive effect on the operation of the engine of the car, increases the operating period of the lubrication system. Therefore, it is important to select a lubricant suitable for a particular type of engine, taking into account the temperature of the region in which it will be operated. vehicle... You should not use fluids developed for the summer at too low temperatures, and lubricants designed for the winter should be poured in the heat. It is possible to buy multigrade oils if the difference in ambient temperatures corresponds to the operating temperatures of the multigrade liquid.
Please note that constant driving with engine oils recommended for topping up is prohibited. Such exploitation leads to many negative consequences:
- an increase in the amount of harmful impurities in exhaust gases;
- decrease in the efficiency of the car engine;
- increased fuel consumption;
- reduction of the starter resource.
Also consider basic framework engine oils when selecting a lubricant. Synthetic and semi-synthetic fluids operate over a wider temperature range than mineral fluids.
Recommended engine oil for Hyundai solaris
Recommended engine oil for Toyota Corolla
