Homemade product based on the engine from an old washing machine. Homemade products with an electric motor of an old washing machine How to use a motor from a washing machine machine

We will send the material to you by e-mail

Scrap collectors will be happy to take your old washing machine away from you. But do not rush to please them. You will not help out a little money for scrap, but if you approach this issue wisely, you can acquire many useful things for the household. Homemade products from the engine from the washing machine will help you quickly clean a bird from a feather, cut pet food, mow the lawn, smoke fish and meat. And this is not a complete list of what can be done from a washing machine. Today, in the editorial review of the site, there are detailed instructions on how to give the "iron heart" a new life from the washing machine.

Parts from the washing machine - material for many useful homemade products

If you are going to make homemade products from a used engine, you need to figure out what it is and what it is capable of. In you can find three types of motors: asynchronous, brushless and brushed. Let's take a closer look at them:

• Asynchronous- can be two-phase or three-phase. Two-phase engines are found in old models of Soviet production. More modern machines are equipped with a three-phase one. The design of such an engine is extremely simple, it can reach speeds of up to 2800 rpm. The working engine removed from the machine just needs to be lubricated - and it is ready for new exploits.

• Collector- you will find this type of motor in the design of most household appliances. Such devices can operate on direct and alternating current, have compact dimensions and controllable speed. The only drawback of this engine is the washable brushes, but these parts can be replaced if necessary.

• Brushless direct drive- the most modern engine from a Korean manufacturer. You will find it in modern washing machines from LG and Samsung.

Now that you can determine the type of motor, it remains to decide where you can apply the motor from the washing machine.

We correctly disassemble and decide what can be done from the parts of the old washing machine

Dismantling a washing machine is a slow business. After working with water, salt build-up may remain on the parts, it must be carefully removed so as not to damage the parts when removing. What can be made from an old washing machine? For homemade products, a motor is useful - it will become the basis for many devices. The drum will also be used. It is usually made of stainless steel. Disconnect all pipes from the drum. A loading hatch may also be useful. In addition to these parts, do not rush to throw away the springs, counterweights and body parts.

How to make a sharpener or grinder from a washing machine motor

A sharpener is one of the most sought-after home tools. It can be used to sharpen garden tools, household knives and scissors. If you don't already have one, buy it at any tool store or make a grinder from a washing machine. The most difficult moment is how to attach the emery wheel to the motor. The easiest way is to buy a ready-made flange. It looks something like this.

You can grind a flange from a metal pipe of a suitable diameter, most often a pipe with a cross section of 32 mm is suitable. From it you need to cut a piece 15 centimeters long, this is quite enough to fix the emery. The flange is secured to the motor shaft by welding or through bolt. The video describes in detail how a do-it-yourself grind from a washing machine works:

We make a lathe for wood from a washing machine

What else can you do with the washer motor? One popular idea is a wood lathe. Let's consider a step-by-step process.

Illustration	Description of action
	Use a metal corner to secure the motor firmly to the workbench. To do this, drill holes for fixing to the motor feet and table.
	To attach a wooden part, you need a flange fixed to the motor shaft, and these are the studs made from ordinary shear-headed bolts. Screw these pins into the base. You will need 3 studs.
	The motor is fixed to the table with self-tapping screws, to the metal part - with bolts.
	The opposite end of the wooden part is attached with such a fixture. It consists of a screw with a loop, two wooden supports perpendicularly fixed to the corners.
	This piece of wood must be movable so that different pieces can be used. For mobility, it is attached to a threaded rod with bolts.
	A power supply is required to control the motor. One of the computer units can be used. You will need to install switches to adjust the rotation speed.
	How to connect a motor to a power supply in animation.
	To guide the instruments, make a handcuff. It consists of two wooden parts and a metal corner. All parts are movable due to fastening with one bolt.
	The lower part of the handcuff is rigidly fixed on the workbench with self-tapping screws and corners.
	The workpiece is fixed on the machine from two sides: on the left - on pins, on the right - on a bolt with a handle. To fix it in the workpiece, you need to drill the appropriate holes.
	For work, you will need sharpened tools - cutters.
	The final sanding of the workpiece is done with a strip of sandpaper.

How to make a simple feather removal machine from a washing machine with your own hands for household needs

Slaughtering poultry is a troublesome stage. Usually they do this in the fall, when the ducks and broilers have reached the desired weight, and it is no longer profitable to keep them in the winter. You need to pinch a few dozen or even hundreds of carcasses very quickly. You can get rid of hard labor with the help of a pen-removable machine, and you can easily do everything from the same details of the washing machine.

For the device, you do not need to disassemble the washing machine. It is especially convenient to use top-loading machines. You just need to fix the beats in the drum so that they look inward. Before plucking the chicken, the carcass must be scalded with boiling water, and then simply thrown into a rotating drum. Here's what you get:

Important! To prevent water from entering the feathering machine motor, you need to protect it with a plastic cover.

And the last point - the feathering device must be firmly fixed, since the vibration when loading the carcass will be very strong.

Used Lawn Mower

We continue to look for the answer to the question of where you can use the motor from the washing machine. Another original idea is manufacturing. For a small area, an electrical model tied to a power source with a cord is sufficient. The device of such a unit is very simple. You will need to make a platform on four wheels with a small diameter.

The motor is fixed on top of the platform, the shaft is threaded through the hole at the bottom, and a knife is attached to it. It remains only to attach handles and a lever to the cart to turn the power on and off. If you have an asynchronous motor lying around, you will be surprised how quiet the unit will turn out, even in comparison with the factory models.

Advice! To prevent grass from wrapping around the knives, you need to slightly bend their cutting edges down.

Video: how to make a lawn mower

Animal feed cutter

For a villager, a feed cutter is a very important device in the household. And this unit is easy to make from. What can be used: a drum and a motor.

For a feed cutter, you will need to make a body in which a drum with sharpened holes for cutting and a cover for pressing will be mounted. The connection between the rotating drum and the motor is via a drive. The finished model looks like this:

How to assemble a generator from an old washing machine

We continue to consider homemade products from the motor from the washing machine, and the turn came to the generator. You won't be able to assemble a powerful device, but you can prepare for an emergency shutdown. To turn the engine into a generator, you will have to disassemble it and partially cut off the core. In the rest of the core, you need to make grooves for neodymium magnets.

The gaps between the magnets are filled with cold welding. To operate the device, you need to include a motorcycle battery, a rectifier and a charge controller in the kit. Details of work in the video:

Homemade concrete mixer

If you have started a small renovation that requires, for example, plastering the walls, a concrete mixer will come in handy. And again, the parts of the washing machine will come in handy.

As a container for concrete, you can use the same drum with pre-sealed holes for draining water. It is best to use parts from a front-loading machine, there is almost nothing to redo. To strengthen the body, use a metal corner, and for convenient movement of the concrete mixer, equip it with wheels. The main difficulty in the design is the manufacture of a "swing" for the correct tilt and subsequent pouring of concrete. How to do it correctly in the video:

Homemade products from the engine from the washing machine: circular saw

You will be surprised, but a circular can also be built on the basis of a washing machine motor. An important point in this matter is the additional equipment of the motor with a device that regulates speed. Without this additional module, the circular will work unevenly and simply will not cope with the task at hand. Device assembly diagram:

The principle of operation of the device is simple: the engine drives the shaft on which the small pulley is worn. From the small pulley goes the drive belt to the large saw blade pulley.

Important! Take care of your hands when working with a homemade circular. All structural parts must be firmly fixed.

The resulting unit will not be very powerful, so it can only be used to dissolve boards up to 5 cm thick.How does such a homemade circular work:

What else can be made from a washing machine drum: original decor ideas

The drum, with its correct perforation, is a material for the manufacture of decorative items. Here are some interesting ideas.

Bedside tables and tables. Top-loading drums with a door can hide the little things you need.

We make a brazier from a drum from a washing machine, photo examples

- the product is temporary. Sooner or later, it burns out and needs to be replaced. Each time you can buy a new one or use an improvised material, for example, a drum from a washing machine. Making this craft out of a washing machine drum takes a couple of minutes. The beauty is that oxygen easily enters the perforated container, which causes active combustion.

The drum metal will be able to withstand a couple of seasons. Make a comfortable stand for him so that you can not bend over, and you're done. Standard length skewers will fit comfortably on a small brazier. If necessary, you can lightly tack a pair of rails by welding.

How to make a good smoker from a washing machine drum

The cherry on the cake in our question is. Fragrant smoked meat, bacon and fish - what could be better for the table? If you have a tank from a top-loading car lying around in your shed or garage - consider it in the bag.

In the bottom of the tank, it is necessary to cut a hole for the firebox, weld fasteners inside for hanging products. It remains only to install the tank on the hearth, hang the fish or bacon, cover the top of the tank with a lid and ignite the sawdust.

It is important that the fuel under the smoker is smoldering and not burning. It is better to place such a device away from home.

Important! You will have to look after such a smokehouse. It cannot be left for a long time, the fire can flare up, and instead of smoked, you will get a burnt product.

Your favorite washing machine has already lived its life and you decided to send it to the trash heap? Take your time, because you can create different homemade products from the engine from the washing machine.

In contact with

Spare parts

An automatic washing machine has a rather complex design. Even in the event of a breakdown, it contains the parts needed to make some homemade products. Let's see what can be made from the spare parts of an old washing machine.

The main spare part, of course, is the engine (motor)... If it works, then it can be used to make a generator, sharpener, lawn mower and other appliances. Disconnect the wires carefully, remove the motor from the body of the washing machine and save it.

The manhole cover can turn into a fancy window or a beautiful pet feeding bowl. You can also make a case for meters from durable glass.

For the construction of various homemade products, legs, springs and other small parts are useful. The body itself can become a wardrobe or a unique table.

Let's consider in more detail, what can be done with the motor.

Washing machine motor prices

washing machine motor

Types of motors

Asynchronous

The oldest type of engine, consisting of stationary stator and rotating rotor. The first serves as the basis and magnetic core for the structure, and the second creates the driving force of the drum. The entire motor is driven by the alternating magnetic field of the component parts.

Asynchronous motors have low torque, therefore, the drum often wobbles during operation. Other disadvantages are overall dimensions and modest efficiency. At the same time, they are noiseless, are cheap, and have a simple design.

An asynchronous motor is often found in low-power, low-power appliances.

Distinguish between two- and three-phase asynchronous motors. The first ones went out of production long ago, and they can only be found in very old designs.

Collector

The most common type of engine. They work well under both AC and DC voltage. Under the body with hidden rotor, stator, generator that provides rotation speed. On the collector terminals there are special brushes, with the help of which the rotor contacts the engine.

Note: If you connect the rotor and stator directly, the motor shaft will rotate clockwise. For the opposite direction, you need to change the connection diagram of the washing machine electric motor - connect the brushes towards the rotor.

Unlike their oversized predecessor, collector motors are quite compact and high rotation speed... They are universal: they work with both alternating and direct current. The main disadvantage of the collector motor is low wear resistance: due to the constant contact of the brushes with the collector, the brushes and the collector wear out quickly. If the former can be easily replaced with new ones, then replacing the collector will cost a lot of effort.

Inverter

Most modern look of motors washing machine consists of a rotor and a stator. Unlike other types, the rotor of the inverter motor is directly connected to the drum. They are distinguished by high wear resistance, absence of unnecessary parts, simplicity of design, noiselessness, small dimensions.

However, all this in one motor is not a cheap pleasure: development, production, and therefore the purchase of an inverter motor requires large financial costs.

Connection

To connect the engine to a 220-volt network, you must have a tester at hand: it will help us break wires into pairs, and also measure the resistance in the windings.

Before connecting new models, you need to determine with a tester the wires that come out of the tachogenerator and we will not need it during work. Finding them is quite easy - just measure their resistance: it should be about 70 ohms.

Using the same device, we find the pairs of the remaining contacts. Now we connect one of brushes to one of the wires, and we connect the second brush and another wire to the outputs of the winding. After connecting the motor from the washing machine to the mains, the appliance will start to rotate. To change the direction of rotation, simply swap the brushes.

With older models, the situation is a little different: after defining paired outputs, you need determine the working and exciting windings... The first has more resistance than the second.

We figured out how to connect the motor from the washing machine to the network. Now let's see what machines and devices you can create yourself using it.

Homemade

Homemade products from the motor are quite diverse: with it you can create t grinder, lawn mower, concrete mixer, juicer, potter's wheel and much more. Consider the manufacturing process of some of the listed devices.

Emery

One of the most common uses for an old engine. The assembly of the machine does not require much effort. The hardest part of the job is attaching the grindstone to the motor. The fact is that the diameters of the shaft and stone differ from each other, therefore you need a third item to connect them... A piece of metal pipe with a length of about 20 cm is perfect.A thread is cut at its end, the length of which is 2 times greater than the thickness of the whetstone.

It is necessary to cut the threads in the opposite direction of the movement of the motor shaft. We attach the shaft to the other end using a soldering iron.

Can be drilled at the connection point for greater reliability hole and tighten the bolt there and a nut. We screw two pairs of nuts and washers onto the flange threads one by one, and finally we tighten the lock nut.

We fix the engine on the stand. An old table or a piece of thick board can be used as a stand; you can use fasteners from the same washing machine from which the engine was removed to secure it.

Wood lathe

The power of the old engine is enough for slow processing of a cylindrical workpiece . To relieve the motor from side loads, you can attach a support to it.

Drum Grinder

It is made using a large wooden cylinder with a steel bar in the center. The ends of the bar are connected to the motor chuck and bearing pedestal.

Concrete mixer

Old washing machines, or "barrels", easily turn into compact and practical concrete mixer... For this:

1. We take out the activator from the car.
2. Cut from sheets steel 4-5 mm thick blanks for the manufacture of blades.
3. We weld a pair of U-shaped blades, connected at right angles.
4. We weld them in place activator.

The homemade concrete mixer will work after you connect the motor from the washing machine to the mains. If the machine will be used to work with small volumes of building material, then the power of the old engine is sufficient. For larger volumes, it is recommended to connect a more powerful motor.

Feed cutter

For the manufacture of a feed cutter-grain crusher, you will need a barrel body and an engine from an automatic machine:

1. At the bottom of the case create a hole through which the finished feed will come out.
2. Similar to a concrete mixer create blades with knives. You need to choose the right size for them: there should be a small distance between them and the edges of the case.
3. Installing the blades: one at the bottom of the body, and the other at a distance of 0.5 meters from its top. In order to achieve higher productivity of homemade products, it is recommended to use a separate shaft for each blade so that they rotate in opposite directions.
4. Remains only cut holes on the cover, through which we will fill in the raw materials.

Lawn mower

Let's move on to more complex and extravagant designs. First on our list is a lawn mower. By making a homemade lawn mower, you will save a huge amount of financial resources, because these simple machines are quite expensive. If done right, then a home-made lawn mower from the engine from a washing machine will be in no way inferior to appliances on the shelves of stores.

First, let's figure out what materials and tools we need:

• collector motor;
• compact yet durable wheels. These can be removed from strollers, toy cars. If there are none at hand, cut the wheels out of the plastic profile;
• the base will require a thick piece of steel or regular saucepan lid;
• knives, discs;
• metal pipe;
• steel corners;
• copper wire, plug;
• switch;
• fastening materials;
• open-end, end, wrenches;
• welding machine, grinder;
• hammer;
• drill, screwdriver, pliers;
• soldering iron.

Getting started:

1. In the center of the base cut holes for the motor shaft. We install it with the shaft down.
2. Attaching earlier manufactured sleeve on the shaft, and we attach the disk (knife) to it.
3. From the corners we assemble the frame for the motor.
4. We weld the handle, attach the switch to it
5. We connect the engine to the power supply.

be careful: Unlike factory appliances, our homemade lawnmower's wires are not insulated. It is strictly not recommended to use such a device in the rain or for cutting off wet grass.

If you still want your machine to be operated in any weather, then reliably insulate the wires, and for the device assemble the small casing made of waterproof material. A metal bowl is suitable as a cover.

Generator

Tired of unexpected power outages? Want to create backup power supply who will help you out at the right time? So why not create a generator from a washing machine engine with your own hands? The assembly process is quite complex, but the result is worth it.

An asynchronous motor will serve as the basis for the future generator. Before creating the generator, let's do some preparatory steps:

1. We disassemble the motor case... Using a lathe, we make a cut on its core with a depth of 2 mm.
2. In pre-prepared grooves on the core insert neodymium magnets.
3. Create a template for attaching magnets from a tin strip. We mark on it the placement of two rows of magnets.

The dimensions of the strip must exactly match the dimensions of the core: the tin must lie tightly on it.

The preparation is complete, we proceed to the assembly itself. We will need:

• sandpaper;
• cold welding;
• glue;
• rectifier;
• tester;
• battery;
• charge controller.

The assembly sequence is as follows:

1. We glue the template on the motor... We glue the magnets onto the template itself.
2. Make sure that the distance and angle between the magnets do not change. In the opposite case, voltage drops, a decrease in power or its complete inoperability are possible.
3. Free space between magnets filled with cold welding.
4. Moving on to grinding the engine surface.
5. We find a working winding with a tester. We leave its wires, and delete all the rest. We pass the wires through the rectifier. We connect their ends to the controller. We connect the controller to the battery.

A homemade generator from a washing machine engine is ready to use. An electric drill, screwdriver, or other similar tools are suitable for untwisting the device. Such a generator, of course, will not be able to provide electricity to your residential area, but it is quite suitable for lighting a couple of rooms or the operation of several devices such as TV, refrigerator, computer.

Useful video

As you can see, the range of use of spare parts for an old washing machine is quite large. So what are you waiting for? Breathe a second life into served its time washing machine.

When a washing machine breaks down and it is no longer expedient to repair it, then it becomes necessary to purchase a new one. Don't rush to throw away your old washing machine. If, then why should the good be lost. You can make many useful things from it that will be useful to you around the house. Let's look at what can be done from an engine from an old washing machine.

Electric emery from a washing machine engine

One of the options for using an engine from a typewriter is the manufacture of electric emery... This device will be very useful in the household. Thanks to him, you can quickly sharpen a knife, drill, scissors and any other cutting tool. Of course, the task is not an easy one, but with a skillful approach, everything can be done quickly enough.

The first and foremost task- this is to attach a whetstone to the engine itself, or rather, to the engine shaft. The problem is that the main diameter of the grindstone hole and the diameter of the washing machine motor shaft are completely different. This problem is being addressed. You need to prepare a special flange that will have two different sides. On the one hand, there will be the necessary thread to securely fasten the emery wheel, and on the other hand, the motor shaft will be pressed in. To make the flange, you need a small piece of steel pipe with a diameter of 32 millimeters.

Flange making process:

• We take the necessary pipe (32 mm). The pipe length should not exceed 20 centimeters.
• Now you need to thread one end of the pipe. To securely fix the flange on the shaft, it is necessary that the thickness of the emery wheel is half the length of the thread. It is very important to consider the direction of the thread. It should be cut in the opposite direction of rotation of the motor shaft. Otherwise, the whetstone will simply fly off the shaft as it rotates.
• The other end of the shaft must be heated with a blowtorch and pressed onto the shaft. After cooling down, the pipe will be securely fastened to the shaft. For a stronger connection, you can weld the pipe to the shaft. If there is no welding, then you can simply drill a hole and connect with a bolt and nut.
• Now you need to pick up three nuts and two washers of the required size. At the end of the threaded pipe we screw one nut all the way, put on the appropriate washer, then the emery wheel, then another washer and tighten it all with the second nut. You need to tighten everything tightly, and at the end also fix it with a third nut.

The main task is completed, now you need to secure the engine in a reliable way. The mounting stand is made depending on the presence of holes for mounting itself. After making the stand, we fix the engine on the workbench. The motor brackets on some washing machines are great for mounting on a workbench.

Electrical connection

After the engine with emery is fixed on the workbench, you need to connect it to the power supply.

This completes the process of making electric emery. The device is now ready for use.

Making a lawn mower from a washing machine engine

Feed cutter manufacturing technology

The feeder is ready for use. Thanks to such a device, in just one hour, you can process up to 100 kilograms of raw materials in various cities.

Making a concrete mixer from a washing machine engine

If you are planning a construction site, then do not rush to throw away your old washing machine. You can make a full-fledged concrete mixer from it, which will greatly facilitate the construction process for you.

The process of performing work on the manufacture of a concrete mixer

We make a generator from a washing machine engine

A 12 V generator can be made from a car engine. To do it, you do not need a lot of work and a lot of additional materials. All that is needed are 32 custom-sized magnets (20 x 10 x 5 millimeters).

The whole alteration process consists in removing the core layer and installing special magnets. The rotor has four poles, with eight magnets per pole. On a lathe, you need to remove a small layer of the core and install magnets in these grooves. Then the poles must be filled with epoxy resin, having previously wrapped them with paper. Now you need to install new bearings. Find the working winding, and cut off the old wires. The generator is now ready for operation.

If you have imagination, working hands and the necessary knowledge, then on the basis of the above examples, you can assemble other devices and devices for various purposes. All of the fundamental principles are outlined in the examples above. The analogy of production in most cases will be the same, with the exception of the characteristic nuances.

After just a few years, I want to replace them with newer and more sophisticated ones. But it is a pity to throw away the old equipment that is still working. Therefore, it can be given a "second life". Very often, a washing machine acts as the basis for homemade products. Absolutely all elements can be used from it: engine, wiring, housing, drum, legs. But the most common homemade products from the engine from the washing machine.

What can you collect?

Homemade products from the washing machine engine are used in households. They can greatly facilitate many types of work. In particular, the following devices are collected:

• Electric emery, which is essential for sharpening knives, drills, tools, and so on.

• A lawn mower that allows you to mow grass in your summer cottage.

• A feed chopper that cuts greens into small pieces.

• Concrete mixer.

• Cleaver for firewood.

• Potter's wheel.

• Lathe.

• Generator.

This is not a complete list of what can be assembled from a washing machine engine. In fact, there can be a lot of ideas. Fans of tinkering with electronics come up with all new interesting ideas for homemade products from the engine from the washing machine. Therefore, we will dwell in detail on just a few examples.

Emery

One of the most popular homemade products from a washing machine engine (automatic or semiautomatic - it doesn't matter) is an electric foot.

The first step is to prepare the flange. Its need is due to the fact that the shaft from the motor has one diameter, and the grindstone hole has another. One side of the flange will be pressed onto the motor shaft. The second side needs a thread to secure the circle. Most often, a metal pipe 15-20 cm long and 32 mm in diameter is used to make a flange.

Particular attention must be paid to the carving. Its length should be approximately 2 times greater than the thickness of the circle. It is also important to choose the right direction. The thread should be directed in the opposite direction from the direction of movement of the shaft. If the shaft rotates to the right, then the thread is cut to the left. And vice versa. This is done so that the circle does not fly off during operation. Moving in opposite directions, the circle will twist.

The other end of the flange (which is unthreaded) is pressed onto the motor shaft. To do this, it must be heated with a blowtorch. To obtain a stronger connection, the joint is bolted or welded.

A nut is screwed onto the edge of the threaded flange until it stops. Next, a washer and a circle are put on, which is fixed with a washer and a nut on the other side. When everything is tightly tightened, the lock nut is screwed on.

The whole structure is fixed on a stand. Moreover, the mount must be very reliable and durable so that the structure does not move during operation. After that, the motor is connected to the network.

Lawn mower

Lawn mowers are popular homemade products from a washing machine engine.

As a basis, you can take a frame from a stroller or trolley. If there are none, you can make a frame from metal corners. A metal sheet is attached to the finished frame, which will act as a platform. A protective mesh is attached to the front of the platform. Handles are made of pipes. A rubber casing is put on top of it.

The engine is mounted on a platform. In the center of it, a hole is being prepared for the shaft, to which the knife will be attached. The motor is connected to a cable with a plug (or switch). For safety precautions, the plug and socket are placed on the handle.

Feed chopper

The popularity of homemade products from over time only grows. Recently, feed cutters are increasingly being made. This will also require a drum.

4 bolt holes are made in the walls of the drum. With their help, the structure will be attached to the support frame. On one side of the drum, a hole is made for the shaft. On the other hand, for unloading the finished feed. Two knives are used. One is installed at the bottom of the drum. He has to toss feed. Therefore, its shape should resemble a propeller. The second knife, sharpened on both sides, will be the main one. It is tilted towards the bottom.

To prevent the food from scattering to the sides, a lid is made. It is necessary to make a hole in it through which the raw material will be fed.

As you can see, homemade products from a washing machine engine are widely used in the household.

In the modern rhythm of life, time passes very quickly and now a once high-quality and reliable washing machine turns into trash due to wear and tear or for other reasons. What to do with your beloved helper? Many will decide with a heavy heart to throw the device away. But owners with imagination and straight hands can start looking for options for using various working parts. This text is intended to help find the application of the engine from the washing machine. So what can be done from an old washing machine, or rather, from its engine?

It is necessary to start first of all with the basis of the future machine. This platform can be a plate made of old chipboard from old Soviet furniture, which is distinguished by its strength and reliability. The power unit of the unit is the engine from the washing machine... There are standard studs on its body, to which you need to attach mounting angles, which you will need to purchase in advance at any building supermarket or store. Accordingly, we attach the corners to the stand or directly to the base, if it is convenient, of course.

Do not forget that simply connecting the motor from under a 220 W washing machine will not lead to anything good. It is necessary to save the native capacitor and connect the motor through it.

Since the motor shaft from an automatic washing machine is not intended for fixing various cutting or sharpening discs on it, you will need to look for an adapter for a sharpener or an adapter for emery on local electronic boards and purchase it in order to make the device perfectly.

The purchased adapter sits on a 14 mm shaft. Visually, it cannot be confused with anything - a cylindrical element that is fixed with a threaded bolt. The cylinder shaft itself has a thread M 14. A double-sided washer with flowing diameters is put on it, allowing you to install all consumables for a grinder based on an old engine from a washing machine.

Based on the foundation it makes sense to make and install a removable table from the same fiberboard boards. To securely fix the table, on the base, you will need to use two dowels on both sides of the surface. In this addition to the machine, it is necessary to make clearances for a wide variety of discs. It is important.

Thus, an inexpensive but functional sharpening or grinding machine is obtained. It will last a long time and reliably, which is very pleasant, especially in the context of the fact that it was made from an old motor from a washing machine. By the way, some took this principle as a basis in the manufacture of a router, although most of this idea still seems crazy.

Lawn mower

In order to bring this idea to life and make a high-quality device, you need to use:

• steel base;
• wheels and handle;
• the wire;
• a knife that you need to make yourself.

Traditionally, you should start with a base of sheet steel 500-500-5 millimeters. Having prepared the wheels from under something, for example, from an old stroller, we attach them to a steel sheet. The engine itself from the old washing machine is attached directly to the finished base by means of standard studs on the motor housing. On the shaft of the unit itself, with the help of an adapter pre-machined on a lathe, the cutting knife is fixed. Then, having prepared the handle from the available material, we attach it to the steel base. Using the same handle, we bring out the power supply wire of the motor.

The advantages of this lawn mower are the simplicity of the design as well as its functionality. And the best part is that an analogue of a factory mower is much more expensive.

Wood lathe

For the base of the product, a bar of 250-50 millimeters is needed on which the engine from the washing machine is attached. How? The answer is simple - with the mounting angles. The studs are bolted to the corners, and they, in turn, are screwed to the base with self-tapping screws. We put an adapter for a sharpener on the motor shaft. Then we screw on the adapter thread a removable nozzle welded from a bolt with a corresponding thread and a small cylinder with spikes. Thus, this part of the machine is a fixed headstock.

A welded structure acts as a movable headstock, consisting of:

• internally threaded pipes;
• a vise shaft, at the end of which there is a small cylinder with a thrust bearing and spikes.

T the ruba is welded onto a pedestal from a square of 45-45-3 millimeters... The base for the movable headstock is made of sheet steel, on which the pedestal is also welded. Then the base of the headstock is screwed to the bar protruding from the base of the machine.

The next structural part of the lathe from the engine from the old machine is the "stop". It is made of a corner with a cut-out groove, which acts as a guide, and a second corner, which reliably walks along the grooves in the guides thanks to the bolts between these two elements. The same bolts also fix the corner on the guides. The stop is fastened with self-tapping screws directly to the timber.

Circular

First, you need to roll up the bed from a square pipe in the form of a small rectangular table. In the center of it, it is necessary to weld the ears under the shaft with fastening under. On the top of the bed, screw a worktop or a cut-out plate of sheet steel. Under the upper parts of the bed, you will need to weld the base for the engine from the old washing machine with installation later.

In the form of a chassis, a belt drive is presented... On the shaft of the motor and the circular, both pulleys have grooves, and the belt has grooves. This prevents the belt from flying off the pulleys during operation. For ease of use and transportation of this circular, two wheels from the old trolley are attached to the legs of the bed on one side, and on the other side - a convenient handle of the required length. Operating tips include safety rules when working with a circular, as well as the fact that it is always necessary to check the belt tension. This will keep the fingers and the rest of the body intact.

Wood splitter

To begin with, it is worth preparing:

• a threaded cone pre-machined on a lathe;
• a shaft at one end of which a thread is cut;
• two bearings in the housing;
• bearing sleeve;
• pulley;
• a bushing for a pulley;
• nuts and washers with bolts.

Naturally, an engine from an old machine can act in the form of a motor. It is also worth noting that the more massive the pulley, the more powerful the wood splitter will be.

First, the shaft should be placed in the bushing., and then assemble the shaft on the bearings. After that, we securely fasten the cone to the shaft with spacer bolts so that the bolts go into the recesses in the cone. Then the pulley is pushed onto the shaft and clamped through the locknut with a washer. All mechanics are positioned and fixed on a sheet steel plate. At the end, you will need to make a bed, place an automatic machine on it from an old washing machine and pull a belt between the motor pulley and the shaft.

Some ideas from other elements

The scope of the engine from the old, but so dear to the heart of the washing machine is truly great. The options described above are just some of the possible. More information about the use of this kind of engine, or, in general, all parts from an old washing machine, including a drum, can be found on the Internet.

« It is better to see once than hear a hundred times”- this immutable truth applies to the search for interesting variations in the use of elements of the washing machine today. How? There are a lot of options on the Web that can be made not only from the engine, but also from the drum, housing and even the belt separately. What is it about? Some parts of the washing machine can be used to make a mill, mill, generator, pump, and even a barbecue and part of the interior decor can be made from a drum!