Manufacturers offer big choice technical fluids For cars, do you know which oil to fill in Ford Focus 3? Like any other car, Ford Focus 3 needs quality consumables. We are talking about motor and transmission oil. The work of the car, the frequency of repair and service life depends on its quality and timely replacement.
What engine oil is better to fill in the Ford Focus engine 3 in the summer?
First of all, you need to know what motor oil It is better to pour into the Ford Focus engine 3 in the summer. The engine is a "heart" of the car, so it is impossible to allow failures to occur in its work. To do this, take care of the timely replacement of oil.
Manufacturers recommend motor oil, which corresponds to the WSS-M2C948-B 5W20 specification. In specialized stores you can purchase only one product that meets these requirements - Motor castrol oil Magnatec Professional E 5W20. At the plant poured ford oilFormula F.
Which oil can be poured into an automatic box (automatic transmission) Ford Focus 3?
Before answering the question, what oil can be poured into automatic box (automatic transmission) Ford Focus 3, you should know the following. Ford Focus 3 is equipped with a gearbox with two clutches. It combines all the advantages of the machine and mechanics. Having a high efficiency, it quickly switches the transfer, consuming fuel as mechanical box Transmissions.
What oil is poured into the mechanics at the plant (official) in winter for Ford Focus 3?
For those who are interested in the question of which oil is poured into the mechanics at the plant (official) in winter for Ford Focus 3, the following information will be useful. As already mentioned, manufacturers claim that the oil is flooded for the entire service life of the car. The factory poured the original transmission synthetic oil Ford 75W90 (Article 1 790 199). Despite this, both car owners and a motor assembly state that the oil must be changed after 80-90,000 mileage kilometers. Oil replacement will extend the life of the car. In addition, the procedure itself is simple and low-cost.
Alekcandr_dizel
Much read-read ... For myself on disgusting Durateks, still on Restayle, I decided that Valvolin 5-40 Sinpauer is one of better options, Peter the identity has a lot of good reviews ... If the phase is 1.6 then the same brands but 5-30.
Under the cat a little my earlier thoughts about the original.
Careful study of the topic about oil, communication with experienced Ford service specialists and authoritative Moscow representatives of the group 16 gave me the ground to summarize the final conclusions in relation to our Ford Ford Oil 5-30. And the oil is always original, because Limited sales and dealer logistics will not give rogues to spinning. Log of replacement of oil 10 bees, although they write that synthetic but in fact it is NS synthetics, i.e. Hydrocracing oil having lower characteristics in comparison with synthetic oils with a package of additives adapted to European quality fuel. If there is no money, we go to 12-13 tons km, but it is categorically not to exceed 15 tons km (but I would not), that mileage does not concern MSK and the region, as well as other regional cities that suffer from traffic jams for this case With small runs, very large motoes (stand in the traffic jam and the engine works, so in this case, there are several options (I love my car and changing the oil in 5 bees), and (I am not very worried about this issue and change the oil once at 7.5 Becm), and finally (I don't care about the car and changing the oil after 10.km), and there is another option (4 years passes and there I will sell and let the new owner capital). What time all additives are fully operational The viscosity of the oil is reduced that leads to increased wear of the CPG and a strong blocking of piston rings, more cycles heating-cooling contribute aging oil and The oil begins to burn. In the next oil change, set the level in the middle between mines and max, can be slightly higher, but not more than 3/4 levels, Ford imperfect ventilation system carter gases contributes to the active fascination of the intake manifold, choke and this oil getting into the combustion chamber fats the cylinder head, compression rings, valve and possibly a catalyst (IMHO). In my lock order, the runs of the cars received with complaints of a strong car and their interservice interval were recorded What motors are not (this is 1.8 and 2.0) are particularly susceptible to the problem of a large oil fill on early runs. Invisor with the interval of replacement on the recommendation of the FMK 20 m km with filling Ford formula begin to actively stroke the oil to 100-130 tons (depends on the ride style). Cars in which the owner poured the same formula but changed her after 10 tons km continue to go and in 150-180 tons of km having a big oil rumby on the avgar. In addition, it learned that the old engine (after 100 T km) is better to translate to a large viscosity. Those. For example, the same formula only S 5-40, it will extend the life of your car (all of the above does not apply to the American Split-port engines, they are more perfect). x 1.6, in fact, these engines are more new and perfect especially phase, but also require due attention, they will be held without any special problems more than not but provided timely replacement Oils. I looked in the depths of several engines that worked on the formula more than 100 tons of km, those in which oil changed to 10-15 tons km they have a light yellowish flare, those in which oil went to 20 tons of shit, i.e. million deposit.
Let's summarize my research, if you are a district driver, then with the new ones, there is 5-30 but not energy saving and AEA A3 with Folks and MV specifications, if you have a medium-acting ride style, then pour a formula and change it after 10 tons km Your mileage exceeded 100-130 tons of km and there is a volunteer to the floor of the level for 10 tons km, then we boldly go to a big viscosity and continue to exploit the car. When changing the oil, do not fill the level to the maximum. We have a ride pleasure
So if you are not an Ats driver that formula is something that needs.
Ford Focus Third Generation is a modern, beautiful, safe and comfortable car. With proper maintenance, it will serve for many years, and will not let down. In our article we will talk about how oil is better pouring into the engine, how to choose it to choose and what to pay attention to.
Types of engine oil
Depending on the characteristics, oils for engines are divided into several types. They are applied in different conditions and allow you to reliably protect the Ford Focus 3 engine from premature wear by lubricating the pistons and other parts in the system. In most cases, the separation is used for diesel and petrol engines.
In general, the engine oil on Ford Focus3 is a substance that includes distilant products, various mixtures and residual substances, synthetic additives, etc. As for the temperature of the external environment, in which the liquid will be used, it will be separated to the following types:
- All-season (from +25 to -25 ° C).
- Winter (from -35 to 0 ° C).
- Summer (from 0 to +35 ° C).
There is also another classification of motor oils - in composition basic oil. This criterion implies the following types:
- Mineral.
- Synthetic.
- Semi-synthetic.
For properly operation Ford Focus 3, the engine oil will serve quite a long time, keeping all its protective properties. Moreover, the selection of the correct option in accordance with the manufacturer's recommendations allows you to achieve maximum efficiency and productivity of the Ford Focus motor 3. Since the engine oil is made from oil, that is, it is a product of its processing, it must have excellent detergents. This will allow maintaining the internal elements of the engine clean and ensure their proper work.
One of the most important requirements for Olla Ford Focus of the Third Generation is its resistance to corrosion exposure on the parts of the motor during its operation, as well as the parking lot without work. In addition, extremely an important factor is resistance to storage and transportation in different conditions, as well as the absence of foaming at elevated or reduced temperatures.
Before deciding which oil pour into the engine, you need to consider mileage Ford. Focus3. The fact is that the more years the car and the more she drove, the more viscous there should be motor oil.
The choice of similar products for the car Ford Focus of the third generation is huge on the market, and choose the option for yourself will not be difficult. The main thing is to take into account the manufacturer's recommendations, and even better - to pour only Ford's branded engine oil. Below we will imagine a list of manufacturers suitable for FordFocus3.
Basic oil requirements
In the Ford Focus Engine 3 you need to pour only the oil that suits him, because it is extremely important element In provision normal work Motor. Attention must be paid to the chemical, thermal and mechanical impact that oil receives in the motor system when contacting various parts. Only in case of their compatibility, the substance will fully fulfill its main tasks and extend the service life as long as possible. If we speak as a whole, then the main requirement is the correspondence of the characteristics of the selected option to the conditions of its use.
Among other things, to fill in Ford Focus 3 engine oil needs only that suitable for the following requirements:
- The ability to maintain their properties for a long time.
- Stability with respect to temperature change.
- The possibility of cold launch Ford Focus 3.
- Excellent detergent applicable to poorly soluble pollution.
- Resistance to corrosion, anti-wear capabilities.
- Low volatility and a small consumption.
- Lack of foam formation when temperatures change.
- The ability to perform a function in extreme conditions.
- Compatibility with seals, catalysts and other substances.
- Stability when moving and stored.
Features of the replacement
In general, it is not difficult. To do this, you need to merge the old, change the filter and pour new engine oil. On Ford Focus 3, this operation can be done on your own or contact a hundred.
It should be noted that if you decide to pour another type of oil, there are certain nuances here. The fact is that you will need to wash the Ford focus engine 3 with a special washing matter, as well as replace the filter (MANN, FRAM or other firms). As washing oil You can purchase Liquimolymotorclean, MobilSpecial or any other qualitative option from authoritative companies.
In addition, the washing may be required if on the Motor Ford Focus 3 you found unusual sediments that are characterized by bad solubility. The most important thing in the matter of oil is its quality. Do not regret money and buy the cheapest option, because it will not be able to securely protect the engine, and especially if exploitation occurs in extreme conditions. It should be noted that the feasibility of buying the most expensive product is also low, because a significant part of the price is a brand fee. Pay attention to the recommendations of specialists and the experience of Ford Focus 3 owners, which will allow you to choose optimal option By the ratio of price - quality.
Summarizing
In order to systematize the said in the article, the table will be presented below, which allows you to figure out which oil you can pour into the Ford focus engine. Their reliability is tested at the level of the usual owners of Ford Focus 3, and also proven by many laboratory studies.
| Year | Level of viscosity | Petrol | Diesel | View | Brands | ||
| all-season | winter | summer | |||||
| 2011 | 10 W / 5015 W / 405 W / 40 | 0 W / 405 W / 50 | 20 W / 4025 W / 50 | SN. | CJ. | synthetics | Mobil, Castrol, Shell, Xado, Valvoline, Lukoil, Zic, GT-Oil |
| 2012 | 10 W / 4015 W / 40 | 0 w / 400 w / 50 | 20 W / 4025 W / 40 | SN. | CJ. | synthetics | Castrol, Shell, Mobil, Xado, Zic |
| 2013 | 10 W / 4015 W / 4015 W / 50 | 0 w / 400 w / 50 | 20 W / 4025 W / 40 | SN. | CJ / 4. | synthetics | Shell, Mobil, Castrol, Xado |
This list includes a large number of different options for Ford Focus 3, which differ in both prices and quality. If we speak as a whole, then the main requirement for oil is the compliance of its characteristics of the requirements of Ford, in this case for specific model car Focus third generation.
You can also pour products from other firms (domestic or foreign, does not matter), but do not pay attention to the cheapest options, because their effectiveness is usually quite limited. Do not forget to change the engine oil in a timely manner on Ford Focus 3 and maintain it correctly. This will allow you to extend the service life and always be confident in your car.
Ford Focus 3 - a very popular car on russian market. The car has established itself from the best side not only due to its ride qualities, comfort and stylish design, but due to high reliability. In addition, the owners of such cars do not arise problems with independent service. And yet, in practice there may be questions even experienced motorists. This concerns large faults, and replace supplies. So, in the latter case, the most demanded procedure is the choice and replacement of engine oil. This task requires certain knowledge in theory, but on the other hand, is available for performing a garage method. Consider in detail how to choose the right oil, and how much to fill it into the engine Ford Focus 3.
This issue is often asked almost all the Ford Focus owners. The fact is that the oil change regulations may differ from the official regulation established by the manufacturer. After all, the frequency of replacement also depends on the operating conditions. So, under the influence of adverse climatic factors, oil comes into disrepair, and therefore it may be necessary to replace it before the deadline. The official replacement regulation for Ford Focus 3 is 20 thousand kilometers. It is relevant only for European countries with a favorable climate. IN russian conditions Oil must be changed twice as much as it does not have time to lose its useful properties. Thus, Russian motorists should be replaced every 10-12 thousand kilometers, or even earlier. For example, if the machine is constantly operated in light off-road conditions, and if an alternating climate with temperature drops prevails, then the regulations can be reduced and at all up to 5-7 thousand km. The more often changing the oil, the better will affect the reliability of the engine.
Because of what other oil quickly comes in disrepair
In addition to climatic factors, there are other reasons for the urgent replacement of oil in the engine. Among them, you can select frequent ride on high revolutions Engine, aggressive ride style, permanent ride at high speeds and sharp maneuvers. Ford Focus 3 - a machine with good handling and brakes, and yet, with this style of driving, its parts are subjected to tremendous loads, like engine oil. His properties lose their useful effects faster, and no longer capable of cooling parts and prevent overheating.
Signs of urgent oil replacement
To determine whether the engine oil is corrupted, for this you need to check its level. If on a measuring probe, the imprint of the oil has a dark shade, and stinks burned, it already indicates an urgent substitution. The same applies if the fluid contains a metal chips, which is one of the reasons for mechanical wear.
Choose oil for Ford Focus 3
When selecting engine oil, various parameters should be taken into account, especially if the selection is given in favor of an analog oil. Whatever brand, the product must have the same specifications, like the original oil. For example, oil for gasoline motors Ford. Focus 3 has the WSS-M2C948-B specification, as well as the viscosity class 5W-20. It means that parameters should have original oil, as well as its analogue. So, among the last one of the best options for Ford Focus 3 will be Castrol Magnatec. Professional E.
As for diesel engines, the WSS-M2C913-C specification is provided for them, as well as the viscosity class 5W-30.
You can choose among other well-known brands, such as LUKOIL, Mobile, Shell, Rosneft, ELF, ZEK and others.
View of oil
- Synthetic is the most optimal option for Ford Focus 3. High yielding rates, low-temperature resistance, good non-stick properties, the ability to effectively cool parts - the key advantages of synthetic oil. Recommended for cars with small and big mileage.
- Mineral - the most affordable oil to date. It is suitable for cars with a large mileage, including for Ford Focus 3. In addition, it is worth it only in extreme cases, for example, if there is not enough money for clean synthetics. Moreover, such oil is not recommended for operation when low temperatures.
- Semi-synthetic oil - is a mixture of synthetic and mineral oils. This option is uniquely better than mineral product, but largely inferior to synthetic oil. Thus, semi-synthetic - a more decent alternative to mineral, rather than the synthetics.
It can be concluded that for Ford Focus 3 better suitable Synthetic oil, and with a lack of money - semi-synthetic.
How much to pour oils
The volume of filling fluid depends on the working volume engine Ford. Focus 3.
For example, for 1.5 liter engines, 4 liters of fluids should be poured, 4.2 liters are recommended for motors with a volume of 1.6, and more than 5.6 liters of oil are poured into powerful 2-liter engines.
Finally, I must say that the maximum volume of oil can be pouring only with a complete replacement, that is, with a complex flushing of the motor. With a partial replacement, pour out full volume is not possible, since in this case the remains of the old oil will remain in the engine, including dirt and soot. Therefore, for a more efficient procedure partial replacement It is advisable to repeat 2-3 times, with an interval of 500-600 kilometers.
Selection of lubricants are made taking into account the parameters of the auto motor and its technical characteristics. A poor quality or incorrectly selected machine leads to a set of negative consequences. We invite you to familiarize yourself with the requirements for recommended engine oil for Ford Focus.
Model 2000 release
According to the plant requirements, the manufacturer Ford Focus preferably use Ford's branded lubricants or Motorcraft Formula E, having a viscous sAE indicator 5W-30. In the absence of original motor lubricants Alternatively, it is allowed to pour autosals that have a viscosity indicator of SAE 5W-30, which meet the standards of Ford WSS-M2C913-B.
The selection of viscosity is made according to Scheme 1.
Scheme 1. The dependence of the viscosity of the car from temperature ambient.
According to Scheme 1, it is recommended to apply liquids having a viscosity indicator SAE 5W-30. For topping you can use motor liquids SAE 5W-30, 5W-40 or 10W-40 corresponding to the type of oil A1 / B1 (preferably) or A3 / B3, depending on the ambient temperature. It is forbidden to apply cars with a viscosity of 10W-40 if the air temperature is less -20 0 C.
- ZETEC engines - SE 16V 1.4 l:
- 3.75 l, if we take into account the oil filter;
- 3.5 excluding the filtering device.
- Motors ZETEC - SE 16V 1.6 L, ZETEC - E 1.8 L, ZETEC - E 2.0 L, DURATEC ST 2,0 L:
- 4.25 liters, considering the oil filter;
- 3.75 without oil filter.
- DURATEC 8V 1.6 L:
- 4.2 l with oil filter;
- 3.7 without a filtering device.
- Motors Endura-TDDI / DURATORG TDCI 1.8 l:
- 5.6 l, taking into account the oil filter;
- 5.0 liters excluding the filtering unit.
Ford Focus MK2 2004-2011
Model 2006 release. According to the Manual manufacturer Ford Focus recommended to use lubricants Composing characteristics:
- original Motor oil Ford or Motorcraft Formula E;
- the viscosity indicator SAE 5W-30.
- wSS-M2C913-B tolerances.
It is permissible to use alternative lubricating fluidscorresponding to the requirements of WSS-M2C913-B having a viscosity of 5W-30.
Also in the instruction manual of the Auto indicates the following information:
- It is forbidden to pour oils having a viscosity indicator SAE 10W-40 if the ambient temperature is below -20 0 C.
- In the absence of cars, the corresponding requirements of WSS-M2C913-B are recommended to use auto sAE viscosity 5W-30. If there is no possibility to purchase recommended lubricants, you can pour fluids that have a viscosity of 5W-40 (except machines using FlexFuel fuel) or 10W-40, which according to ASA standards correspond to the class A1 / B1 or A3 / B3 oil. Preferably use A1 / B1.
The volume of lubricant required when replaced is:
- Complete set 1.4 L Duratec-16v:
- 3.8 l with an oily filter even;
- 3.5 liters excluding the filtering unit.
- Complete set 1.6 L Duratec-16v:
- 4.1 l with even oil filter;
- 3.75 liters without taking into account the filtering device.
Ford Focus MK3 2011-2017 release
Model 2015 release. From the instruction manual for auto-recommended engine oil for Ford Focus is determined by the type of engine. For engines working on gasoline, it is recommended to use Ford or Castrol motor oils with a viscosity of 5W-20 that meet the requirements of WSS-M2C948-B. As an alternative lubricant, except Engines 1.0 L ECO Boost (Fox), you can pour the 5W-30 viscosity of the 5W-30 viscosity corresponding to the requirements of WSS-M2C913-C. At the same time, preference is worth paying products. ford companies or Castrol.
In the absence of these lubricants, it is allowed as a top of the use of oils with a viscous indicator 5W-30, corresponding to the ASE ASA class A5 / B5.
The volume of engine oil required when replaced is:
- For Motors 1.0 L Eco Boost (FOX):
- 4.1 liters with oil filter;
- 4.0 liters excluding the filtering device.
- For autodware 1.6 L Duratec-16V-VCT-SIGMA:
- 4.1 l with oil filter;
- 3.75 liters without oil filter.
On manual car Ford Focus, for diesel power aggregates Ford or Castrol lubricants are recommended with a viscosity of 5W-30, complying with the requirements of WSS-M2C913-C.
Conclusion
Recommended Motor oil for Ford Focus has a positive effect on the operation of the machine engine, increases the operating period of the lubricant system. Therefore, it is important to choose a lubricant suitable for a certain engine type, given the temperature of the region in which it will be operated vehicle. It is not necessary to use fluids designed for summer at too low temperatures, and lubricants calculated for the winter, pour in heat. Buy all-season oils, it is possible if the ambient temperature difference corresponds to the working temperatures of the all-season fluid.
Please note the permanent ride on motor oils recommended for the topping is prohibited. Such exploitation leads to a set of negative consequences:
- increase the number of harmful impurities in the exhaust gases;
- reduction of the efficiency of the automotive;
- increasing the consumption of fuel;
- reducing the starter resource.
Also take into account basic base Motor oils during the selection of lubricants. Synthetic and semi-synthetic fluids operate with a wider temperature range than mineral.
Recommended motor oil for Hyundai Solaris.
Recommended motor oil for Toyota Corolla
