Home Engine Helix Ultra 5W 40 Engine Oil

Engine

Helix Ultra 5W 40 Engine Oil

SHELL Corporation does not need a submission. According to the test results, its products are usually located in the top five list. Unfortunately, the consumer, the cost does not lag behind the rating. Therefore, the buyer has the right to count on special qualities and indirect monetary savings in the process of use.

Bright example: Shell Helix. Ultra 5W40. This is an advanced product that meets the requirements of modern high-performance engines. Fully synthetic formula enhances engine performance, and prolongs their resource.

Home "Fishka" - Unique technology of converting natural gas into the synthetic base for SHELL PURPLUS lubricants. This method is patented, and cannot be applied by other companies.

Application and compatibility

Slave Shell Helix Ultra 5W40 is used in any car according to tolerances:

gasoline engines, including equipped with environmental systems;
diesel engine without a smbed filter;
motors with biodiesel fuel;
multi-fuel power plants (gasoline + ethanol);
gas engines.

Thanks to the GTL synthesis technology, oil provides characteristics in extreme operation modes and in high temperatures.

In addition to automotive power plantsProduct can be used in other mechanisms. Information about this can be obtained from the official representative of Shell.

Synthetic or semi-synthetic?

According to SAE standards, there may be different information on the package:

FULLY SYNTHETIC MOTOR OIL
Synthetic Motor Oil.

From the point of view of the consumer, this synthetic oil. However, a real synthesized product (produced from gas using GTL technology) is marked as Fully Synthetic.

Under the synthetic Motor Oil designation, hydrocracking technology is usually understood. The characteristic of the engine oil produced from the basic base of pure synthesis is not very different from the qualitatively recycled oil raw materials.

The hydrocracking product is significantly cheaper, and is inferior to clean synthetics only in extreme conditions. For example, when peak loads and proceedable temperature modes. Therefore, on the packs of shell Helix Ultra 5W40 and HX8 oils there is a Ferrari logo.

Index hx8 marked oil with higher alkaline number, From the point of view of other characteristics, there is no difference with a simple "ultra".

Shell Helix Ultra 5W40 HX7 oil has similar characteristics in terms of cleaning. but basic base here is different: mineral oilobtained by hydrocreging.

As part of both products there is a corporate set of Active Cleansing cleaning additives.

These oils are focused on different consumer groups:

ULTRA - top product for expensive cars with a sports bias;
HX8 - similar characteristics, cleaning properties helps to put in order motors with solid mileage;
HK7 is a relatively economical composition based on hydrocracking: suitable for ordinary motors, without extreme loads.

Special status among the new shell Helix Ultra L 5W40 oil.

The product appeared due to problems with gas supplies from Qatar. Since raw materials for the production of clean synthetics on Shell Pureplus technology was not enough, and the demand for ultra oil Stable high, the consumer was offered a replacement made on the basis of hydrocracking, but with the preservation of familiar qualities.

The cost of motor oil has not changed, since a cheaper basis was compensated by expensive additives. After resuming gas supplies, the temporary formula has retained.

The company's marketers study consumer reviews on Oil Shell Helix Ultra 5W40 and Ultra L, after which it will be decided to continue the release of products.

Benefits Shell Helix Ultra 5W40

protection of the most loaded motors from slag deposits due to an effective package of additives;
can clear the insides of the motor from harmful precipitation formed by less efficient oils;
defense protection of parts is provided by a set of molybdenum additives;
neutralization of acids generated during operation, protects the engine from corrosion;
prolonged use allows you to save money when replacing oil;
the product almost does not evaporate and does not oxidize throughout the service life;
for low temperatures The viscosity is maintained, oil without delay moves through the channels;
compatibility with all types of fuel: gasoline, ethanol, diesel, gas;
neutralization of sulfur supplements in fuel;
preservation of gaskets and seals made from any materials;
approval for use in sports carsFor example: Ferrari.

Shell Helix Ultra 5W40 oil tests are carried out not only in laboratories. In coordination with potential consumers, products are tested in real operating conditions. This is achieved such high results.

Laboratory shell Helix Ultra 5W40 oil tests can be downloaded for this.

Who is shell oil maker?

Since the company Shell purchases part of raw materials in Russian Federation, Part of production facilities is located in our country. Therefore, "Made in Russia" may be on the packaging container.

The plant in the city of Torzhok was built in 2010, and by 2012 it was 100% manufacturing capacity. Production volumes are sufficient for saturation Russian marketand for Europe.

200 million liters are distributed annually on wholesale warehouses. Quality control at the highest level. Therefore, the buyer does not necessarily look for a canister with the European barcode.

Tolerances, specifications and characteristics

The SN / CF API involves using in engines designed for energy-saving technologies.
ACEA A3 / B3 / B4 makes effective work in any modern motorsoperating on gasoline, biofuel and diesel. High index Admission is designed for turbocharging. Compatible with the fuel that contains sulfur.

The oil has tolerance from leading automakers:

BMW, Mercedes;
Volkswagen AG;
PORSHE;
Renault;
Peugeot Citroen;
FIAT Corporation, including Ferrari;
Chrysler.

Such high confidence is possible only in the presence of the unique characteristics of the product.

The table indicates the parameters as of today.

Indicator	Method	Shell Helix Ultra 5W-40
Kinematic viscosity @ 100 ° С Сst	ASTM D445.	13.1
Kinematic viscosity @ 40 ° С	ASTM D445.	79.1
Viscosity index	ASTM D2270.	168
Dynamic viscosity (MRV) @ -35 ° С	ASTM D4684.	19300
Density @ 15 ° C kg / l	ASTM 4052.	0.840
Flash temperature in Open Tigel ° C	ASTM D92.	242
Frozen temperature ° C	ASTM D97.	-45

Due to the permanent work on improving the chemical formula, the standards change annually for the better.

Outcome

The high cost of oil is economically justified. After the transition to this product, you save on the timing of the engine repair and fuel costs.

For properly operation modern cars need to choose not less modern butter. Shell's company, in this regard, has always been distinguished by innovative ideas. It has developed a unique method of synthesizing crystal clean oil fluid called Shell Helix Ultra 5W-40. It supports the viscosity parameters as much as possible at the same level, it disadvantages longer and saves the energy much better competitors.

Performance features

This brand of oil is more stable competitors. The quality of the fluid remains non-meaning the entire life and is able to perform what is required from it throughout the distance. Even the most severe temperature regime, no impact on it. In addition, this oil experienced Formula 1 riders and eventually decided to use it for their chas.

An important feature of this product is that the oil does not contain chlorine or any other impurities. The company takes care not only about the car, but also on ecology. You can use lubricant in gasoline engines, gas and diesel engines.

Shelf life

The shelf life of any oil is the same, and is 3-5 years. It is stored by the longer, the smaller in its composition of impurities. And since in the product under consideration, the minimum of impurities, then the shelf life is close to the maximum possible mark.

Technical specifications

Shell ultra has the following tech. Parameters:

value kinematic viscosity The fluid is 79.1 mm 2 / s, thus, the engine temperature in operation is 40 0 \u200b\u200bs;
with an increase in the temperature of the engine to 100 0 s, the value of viscosity decreases to 13.1 mm 2 / s;
this oil has a density of 840 kg / m 3;
the temperature at which the fire will occur is equal to 242 0 s (the manufacturer claims that before oil turns it to be boiled, with a couple of times);
the temperature at which the oil freezes is equal to -45 0 C, which makes it very popular among Siberians and other residents of the North.

It follows from this that the oil is arranged so that the flow rate remains the minimum possible and ensure complete long-term protection of the motor.

Benefits

In order not to be content with the dry language of numbers, we will highlight the most obvious advantages of this product:

thanks to the shell ultra, the engine becomes more durable under any operating conditions;
GSM applies even for P-1 riders;
the liquid is supplied to each engine design element, which sharply increases the speed of the motor start, even if it's very cold on the street.
exhausts OT. this oil minimized at the development stage, so the consumption of fuels is as small as much as it can be;
the exhaust oil does not harm the environment, since nothing is admitted.

disadvantages

As deficiencies, you can select the following:

shell refused to fill its products. And due to the fact that the popularity of this manufacturer is only growing, fakes on the market has become more. Therefore, you need to buy only in proven places;
finding the products of the company Shell in a high price segment;
sometimes the fact diverges with what is stated. It is possible that this is due to counterfeit, but periodically in the cold the engine will start "with creak".

Tolerances and specifications

The oil under consideration has the following range of tolerances and specifications:

Tolerances

PSA - B71 2296;
VAG - VW 502.00 / 505.00;
Fiat - 9.55535-Z2 and 9.55535-GH2;
MB 229.5, 226.5;
Porsche A40;
RENAULT RN0700, RN0710;
Ferrari;
Chrysler MS-10725.
Chrysler MS-12991.

Specifications

SN / CF API;
BMW LL-01;
ACEA A3 / B3, A3 / B4.

Designations and form of release:

Designations of lubricant Shell Halix Ultra:

550040754 Shell Helix Ultra 5W-40 1l;
550040755 (600028772) Shell Helix Ultra 5W-40 4l;
5011987140561 Shell Helix Ultra 5W-40 4l;
600028772 Shell Helix Ultra 5W-40 4l.
5011987209626 Shell Helix Ultra 5W-40 1l;

Decoding marking

The classification of this technical fluid is standard and occurs on the SAE system (US engineering society). The marking concluded the data on how viscous and in which temperature range is capable of working:

W (Sokr. Winter) - denotes that given technical fluid Keeps all its operational properties in winter.
5 - the degree of viscosity at temperatures below 0 0 s, expressed in the conditional units of the SAE system.
40 is the limit value of the air temperature at which the oil continues to maintain its characteristics.

It follows from this that this lubricant will work without complaints at temperatures from -30 0 s to +40 0 S.

How to determine the fake?

The fake is always cheaper than the original, but also significantly inferior to him in all characteristics. In order not to get caught on an attractive price and not to buy fake Check originality independently:

first of all, you need to inspect the canisters. Original products are always beautifully decorated, because the manufacturer does not make any point in saving on the package. If the text is blurred or the image is fuzzy, then most likely before you fake;
then you need to look at the facial side of the packaging. If this is the original, then the hooking of the "PurePlus Technology" logo will necessarily be present, and the label placed on the back of the canister will be two-layered;
find a place on which the date and time of manufacture are applied. Spend your finger on these inscriptions. If they are erased, you can be sure that these counterfeit products are not worth it;
smoke the canister. If there is a sharp smell of plastic, then you are fictitious products. Large company does not use cheap plastic in production. In addition, pay attention to the fact that there are no docking seams on the package, the integrity of the form, without a single hint of components;
on all the canes there is an oil level markup. It should be carefully considered how even divisions. If they are curves or different in length, then this is counterfeit, if they are straight and smooth, most likely, this is the original;
the lid and canister must be painted in the same color. In this case, the density of the cover is higher than the density of the canister. Opening the canister should be easily and the lid should occur, separated from the body should not skew it. No foil inserts or laying materials under the cover of the original product.

On the video we present experiences spent for the differences of fakes from the original!

The manufacturer changes the design of the packaging as desired, no one is not warning about it. Therefore, it is not necessary to immediately determine unfamiliar packaging as a fake. Go to the official website of the manufacturer's company to understand whether it really new design Or still try to deceive you.

Price in the Russian Federation and former CIS countries

On the Internet sites and in stores prices differ. However, they all lie at about 600-700 rubles per liter of products. The four-liter canister will cost 2400-3200 rubles. But do not forget that the manufacturer of this oil is in the zone where dominant currencies is the dollar and euros. Because of this, the price in rubles or in the currencies of the countries of the former CIS is much changed over time.

One of the most popular petrochemical products in the global market is Shell's products. For many years of its existence, she won the leading lines in the ratings of the most efficient lubricants. The range of the company is constantly growing, therefore, even one marking of the engine oil may be several varieties. Consider what lubricants Shell manufactures 5W40 with label and what is their difference.

Averaged oil performance ranges

Before switching to the varieties and properties of products of world nevertigigant, we will understand in the label of 5W40 - what does it mean? Marking refers to the international standard SAE, which shares all lubricants into three groups - winter, summer and all-season.

Winter lubricants are denoted by the digit and letter W (for example, 0W, 5W, 10W). They characterize the viscosity of the lubricant and the operating temperature range. Going beyond its limits, oil will lose its properties. In our case, 5W labeling fluid is capable of functioning from -35 to 0 degrees Celsius.

The summer lubricant in the marking there are only double-digits - 20, 30, 40. They also inform, within what temperatures, the lubricant will keep stability. The only difference is that performance summer Oil It is stored only in the conditions of "positive" temperatures. The index 40 suggests that the supplies can be used from 0 to +45 degrees Celsius.

Universal lubricants combine the indicators of winter and summer opportunities. They can be used at any time of the year. It greatly facilitates the life of car owners, because no longer needed to follow the weather.

Motor considered by us shell oil 5W40 operates properly in the temperature range from -35 to +45 degrees. Therefore, it is possible to use it almost in all corners of Russia.

Varieties of oils

The company produces five varieties of motor oils with labeling 5W40 to the world market. Let us dwell on each of them in more detail.

Shell Helix Ultra.

Shell Helix Ultra 5W-40

it motor oil It has a completely synthetic basis. It is intended for engines passenger carsworking on gasoline or diesel fuel. In addition to its main task, petroleum products ensures efficient cleaning motor compartment from pollutants. Even if you forgot the oil replacement on time, it will keep stability for a long time. However, this does not mean that it should be intentionally increasing the intersavice interval. The recommended frequency of replacement of this lubricant is every 10,000 mileage kilometers.

Benefits

Shell Helix Ultra 5W40 has the following advantages:

low evaporation. Because The oil includes only artificial ingredients with increased resistance to temperature changes, the petroleum product will be exhibited economically (subject to the preservation of the system's tightness).
increase the power characteristics of the engine and reduced fuel consumption. Machine creates a durable oil layer on the details, the thickness of which eliminates the gaps, but does not interfere free go. mechanisms. As a result, the maximum productivity of the unit is achieved with minimal effort.
troubleshooting and cleansing the working surface. The engine oil of the Shell of this species is struggling with perennial sediments resulting from the use of an improper lubricant. In a short period of time, the lubricant washes from a third-party garbage from the system and provides it with reliable protection against repeated formations.

Tolerances

Automotor meets the following requirements: API SN / CF, VW 502.00, 505.00, MV 229.5, 226.5, ASEA A3 / B3, A3 / B4, Porsche A40, BMW LL-01, PSA B712296.

Shell Helix HX8 5W40

Another kind of engine oil with synthetic composition. It is produced using PurePlus technology, which provides for the creation of highly efficient lubricants from natural gas. Oil is absolutely harmless to ambientbecause It has no sulfur and phosphorus.

Oriented lubricant on modern power plants, operating from gasoline, gas or diesel fuel.

Benefits

The advantages of Helix can be attributed to:

stable viscosity. Artificial components of engine oil provide him with "immunity" against temperature differences. Lubrication retains performance in all weather conditions, not losing its performance, and calmly transfers sharp temperature differences. IN winter Petroleum product provides instant filling of the system and prevent the oil starvation of the engine.
reducing noise. After the long-term operation of the engine installation, the gaps between the elements increase significantly, which leads to the formation of unnecessary noise under the hood. 5В40 This kind of motor work is significantly quieter.
prevalence. You can meet this oil in any car store. Therefore, difficulties with his search will not arise. Such popularity of petroleum products is explained by its versatility - it is possible to pour this oil into many modern engines.

Tolerances

The product has the following tolerances: API SN / CF, VW 502.00, 505.00, MV 229.3, RENAULT RN0700, 0710, ASEA A3 / B3, A3 / B4.

Shell Helix HX7 5W40

Shell Helix HX7 5W-40

This petroleum product refers to the category of semi-synthetic. Despite the presence of natural ingredients in it, it has increased stability and excellent technical characteristics.

In contrast to synthetics, effectively removing perennial deposits, the semi-synthetic material more gently affects the working surface of the force structure. As a result, the engine receives gentle protection against subsequent accumulation of deposits.

Developed Shell Helix HX7 5W40 oil for gasoline, diesel and gas aggregates of passenger cars. It can be used in motors operating from ethanol mixtures and biodiesel.

Benefits

Advantages of semi-synthetic lubricant Shell Helix:

excellent performance. It has a wide range of operating temperatures. This allows it to function properly both in the winter and in the summer.
eliminating unnecessary noise and design vibrations. A pleasant "rumbling" of the engine compartment is achieved.
reducing the consumption of fuel mixture and preventing corrosion formation inside the power plant.

Tolerances

To the tolerances of this variety of oils include: API Sn / CF, GM LL-A / B-025, JASO SG +, ASEA A3 / B3, A3 / B4, VW 502.00, 505.00, MV 229.3.

Shell Helix Ultra Diesel 5W40

This type of lubricant is designed specifically for turbochargers. diesel engines with intermediate cooling. It has a synthetic foundation that provides oil maintaining initial qualities throughout the interethal interval.

Benefits

To the advantages of this diesel oil Below:

increased endurance. Lubrication is designed specifically for those cars that are operated in harsh conditions: with too low and excessively high temperatures, at large distances on the SUV, with long work on increased turns.
economical consumption. Despite the fact that the power plant works at the limit of the possibilities, the oil is consumed moderately, does not burn and leaves no avail.
effective protection of mechanisms. Frequent overloads under normal conditions cause rapid wear of parts. But not in this case. The composition is instantly distributed over the working nodes, creating a durable on their surfaces protective layer. It is saved throughout the operation of the car.

Tolerances

Oil meets the following requirements: ASEA B3 / B4, A3 / B3, A3 / B4, FIAT 9.55535 Z2, API CF, BMW LL-01, MV 229.5, VW 505 00.

Shell Helix Ultra Professional AV 5W-40

Features of this oil consist in its increased resistance to evaporation, low evaporation and ability to significantly save fuel mixture. It is difficult to find the petroleum product on the shelves. In view of the high cost, it does not use much popularity. However, the lubricant is perfectly coping with the functions assigned to it and contributes to an increase in the power characteristics of the power plant.

The basis of the species is the high-quality synthetics produced by PurePlus technology. Oil is intended for ultra-modern power plants working on gasoline and diesel. Actual for foreign cars, such as Skoda, Volkswagen, Hyundai.

Benefits

The advantages of lubricant should include:

excellent performance. Shell provides a lightweight scrolling of the crankshaft at low temperatures, instant distribution over the system and the formation of a reliable protective layer on the details.
low content of harmful components in the composition of oil. It does not have sulfur, phosphorus and chlorine, which indicates the safety of fuel and securities for the atmosphere.
effective elimination of contaminants from the engine's working area.

Tolerances

Shell Helix Ultra Professional AV 5W40 meets the following standards: API SN / CF, ASA A3 / B3 / B4, MV 229.5, VW 502.00, 505.00, Porsche A40.

Specifications

Comparative characteristics of oils are presented in the table:

Indicator / type	Helix Ultra.	Helix HX8.	Helix HX7.	Helix Ultra Diesel	HELIX ULTRA PROFESSIONAL AV
Kinematic viscosity at a temperature of 40 ℃, mm² / s	76,3	87,5	87,4	79,1	87,4
Kinematic viscosity at a temperature of 100 ℃, mm² / s	13,8	14,5	14,5	13,1	14,5
Boiling temperature, ℃	206	239	242	242	242
Frozen temperature, ℃	-45	-45	-45	-45	-45
Density, kg / m³	851	843,3	843,3	840,2	840,0

How to distinguish fake?

Differences of the original and fake SHELL engine oil

Unfortunately, falsified products are present in the domestic market. Eliminate your car from it can be enough to follow some rules.

Stop buying technical lubricants at doubtful sales points. This applies not only to engine oil. Before you go to the store, do not be lazy to look at the manufacturer's official website and get acquainted with its branded outlets. Only there you can purchase the present engine oil.

Request quality certificates. The presence of confirming the quality of documents indicates the authenticity of petroleum products. Those stores that refuse them to provide or refer to a large amount of work and "Impossibility now to find required documents"90 percent cases are implemented counterfeit. Ready to risk and pour under the hood incomprehensible Zip? Forward, but the repair will then come out in a round sum. It is better to spend more time and strength, but find the outlet, ready to confirm the quality of the engine oil.

Carefully examine the goods before purchased. Even if the documents are all right, it will not be superfluous to make a visual inspection of the canister. Pay attention to the presence of chips, cracks, production defects. They all talk about the manipulations of fraudsters. World Nefigigant who has deserved reputation best manufacturer Lubricants will not allow to produce goods in improper performance.

Also pay attention to the fixing ring. If it is damaged, you should refuse to buy. Under the cover when opening, you must detect a special fill with the manufacturer's logo.

Check the shelf life. Even if the packaging is in perfect condition, and the seller documented the quality of petroleum products, it is necessary to check the shelf life of the oil. It is indicated on the back of the container. There should be no liquid with an unspecified shelf life.

And finally

Shell products confirms their high quality daily. She enjoy millions of car owners, thanks to which the company seeks to meet the needs of even more power plants. All considered types of shell oils with labeling 5W40 have excellent operational qualities. They are able to raise the resource of the motor, increase its power, ensure easy launch in the frost, and also remove the system from polluting elements. However, if the lubricant is selected by the car owner incorrectly, then to feel all the advantages of the petroleum product will be impossible. He, on the contrary, will adversely affect the motor installation. To protect your car from expensive repairs, you should carefully study the requirements of the automaker before purchasing certain engine oils.

Theme post - Shell Helix Ultra 5W40 Oil. Product characteristics will be interested in car enthusiasts first of all, and consider them first. Then summarize the facts.

What do drivers about this product know in general? It is a completely synthetic, manufactured by new technologies. Designed to fill in engines of the most modern models passenger cars. Perhaps all.

And we will add. For fill in the engines of any type - diesel, gasoline, on gas. In addition, the motors can be any configuration - multi-chamber, injection, undead or turbocharging.

As for the characteristics of Shell Helix Ultra 5W40 oil, few people know about them, it is purely specific knowledge. However, we are from bringing a little below, because you can never say in advance, what kind of surprise you will be waiting for tomorrow and what information do you need.

It should be said that drivers love this oil. It guarantees a long life to the engine and provides him with reliable in urban conditions, and this is not so easy to do in the "Stop Start" mode before each traffic light.

Key Features Shell Helix Ultra 5W40

What tolerances and classifications take place to be?

The physico-chemical properties of the product are excellent.

It has an active detergent additives.
Very racks to decomposition in time.
Has low evaporation.
Compatible with the most different species Fuel.

To modify Shell Helix Ultra SAE 5W40, the characteristics may differ slightly from the above. They may be so.

Kinematic viscosity - mm2 / s: 72 / 13.1 (for 40/100 ° C).
Flash temperature - + 206 ° C.
Density - m3: 853 (for + 15 ° C).
Frozen temperature - -48 ° C.

In the Sheer's environment, it is the opinion that the shell Helix Ultra 5W40 synthetic oil according to characteristics is almost five times more efficient than mineral. So this or not - it is impossible to categorically, but the fact that this case Synthetic on the head above "mineral water" is an indisputable fact.

This grease perfectly retains viscosity, has excellent resistance to oxidation. In winter, it makes much easier to start the motor.

As the visitors of our auto attachment already know, the engine fluid plays a key role in the operation of the engine. Therefore, the choice of this consumables is paying out special attention. In this article we will tell you about how ultra 5W40 differs from other analogues and what is its characteristics. You can also familiarize yourself with the reviews of car owners who have already used this liquid.

[Hide]

Technical characteristics of fluid

As is known, high-quality engine oil (mm) determines the durability of the vehicle motor. Accordingly, poor-quality fluid reduces its operation time and can cause certain breakdowns. What is actually different MM 5W40 from other engine fluids and what are its technical characteristics?

MM is a synthetic engine oil of the Extra class, which is manufactured using active detergent technology. According to the manufacturer itself, this liquid is capable of protecting the motor motor much better than traditional consumables. In particular, the HX8 during the operation of the engine regularly and continuously protects the engine engine, contributing to the prevention of sediment and contamination in it.

In addition, MM walked, be it HX7 or HX8, it allows to ensure the optimal implementation of the capabilities of the motor and its best work. Also, MM reduces noise levels in the motor and protects it from large loads. It is also worth noting that HX8 is the only engine fluid in the world, gained access and recommended for the bay in Ferrari cars.

Volkswagen;
PORSH;
Renault;
Fiat;
Rover;
Saab;
Chrysler.

These automakers trust MM Shell 5V40, so the owners of the above cars may not doubt if they decided to purchase exactly this oil.

As for the price, it may be unacceptable for most car enthusiasts, but is it important if we are talking about quality? Of course, such a liquid does not make sense to pour into domestic carsSince such maintenance work works will be too expensive for car owner. But if we are talking about the elite premium-class foreign cars, then the purchase of HX8 is the right step in replacing the consumable material. Moreover, good oil For the engine determines its operation as a whole.

If we talk about performance characteristics Shell Helix Ultra fluids, then they remain stable throughout the term of use mm. The fluid does not freeze with too low temperatures and does not lose the properties of viscosity into severe heat, which is very important for the Russian and Ukrainian climate. It should also be added that MM NH8 was verified in the Formula 1 Research Center, and this cannot remain unnoticed.

Liquid is much superior to the requirements of industrial standards, and also practically does not contain chlorine and fully meets environmental safety requirements. Suitable for any exclusion cars working both on gasoline and in diesel and gas, both for injection and undead and turbocharged and multi-chamber engines.

As for the basic technical characteristics Oils:

kinematic viscosity rate operating temperature The engine from 40 to 100 degrees is from 72 to 13.1 mm2 / s;
the density indicator is 853 kg / m3;
there are no official cases of liquid ignition, but theoretically, it can flash at a temperature of operation of 206 degrees - this can happen with a debt boiling of the motor, which is also unlikely;
the temperature of the mm is -48 degrees, nevertheless, in Siberia, this oil is popular, and there frosts are more strong.

The designed MM composition also makes it possible to reduce fuel consumption and protect the motor in the event that the periods between oil replacements are long. This factor is fundamental to some drivers when choosing mm.

Now let's talk about the benefits of Shell Helix Ultra:

as mentioned above, it is a reliable protection of the motor of your vehicle during operation of the car even in the most difficult modes, as well as in traffic, which increases the engine resource;
Mm is used in world-class races of Formula 1;
excellent launchers - operational flow mm for all engine elements and low level friction contribute to the excellent engine launch during the cold season;
there is practically no ugara, which reduces the flow rate of liquid and, accordingly, the need to regularly add mm to the motor;
no risk with recycling, which is indicated by the reduced level of chlorine content.

Reviews

We invite you to familiarize yourself with the reviews of machine owners who used Shell Helix Ultra oil

Positive	Negative
Not bad synthetics, while there are no complaints. In total, it drove on this oil more than 50 thousand km, the Audi A6 car. I change the "consumption" about every 8 thousand km of run. I was told that it was early, you can still drive a couple of thousand, but, nevertheless, everything suits me. Rides the machine well, it even seems to me that extraneous noises are disappeared. The only thing - I noticed that after replacing, when I drove five thousand km, the engine begins to "eat" oil, gradually topping. And so, in general, everything is fine.	I do not know, maybe I am not a specialist or something I do not understand, but this oil is not impressed. Previously, he always poured "TNK" or "LUKOIL", I support, you know, domestic producer. And here once she shooted with me and decided to take Shell: I thought it would not be consumed. So, just that I was overpaid several times, so then I had to buy a liter, and it, you know, not cheap! Sustained, shorter.
I go to the fourth in the account of the Nissan gasoline, I prefer this car. On all cars poured Motor oil NX7. Compared to the semi-synthetic, which I could "lie" once in the store, it's just the sky and the Earth. It will start with half a trip, no noise, even the expense, it seems to me, has become a little smaller. By the way, I bought liquid and on our car markets, and brought out of Poland and Latvia, there is absolutely no difference.	What are you all so clung to this shell? But oil like oil, there is nothing unusual in it, I have Hyundai Takson, as the car went along the road, and goes. I do not understand why you need to overpay.
Normal oil, once decided not to pampery and flooded in his "eight", the car fire! And the oil is also the easiest launch of the engine on this mm of all that I have ever poured. Then he took Jili, she also lied Shell into him, everything was fine. After Jille moved to Honda Akord and pour Shell into her, too, everything is fine, I recommend it!	Oil like nothing, but they save on the package. And who does it? On the Internet, many different write - some say that in Finland, the plant, others - what in Germany. Had knows, oil and oil, which is distinctive in it? I personally did not understand. And the money is normal for him. In such a difficult time of the economic crisis is an inappropriate waste of finance.
Good motor fluid, no complaints, goes to "Hurray." Was last winter in Siberia a couple of weeks, I thought "the headings" will begin, there is a frost pipette just! But no, there was a sutra on Shell normally, I'm not going to change the manufacturer.

In general, Mm Shell Helik Ultra is a high-quality foreign product that has access to use in many foreign cars. The characteristics and advantages of using this consumable material are largely determined by its popularity among domestic car owners. Shell is already on the market for quite a long time, which allowed this brand to strengthen his positions and collect the most real army of fans. Moreover, the car concerns themselves recommend this "consumable" for use in their cars.

But not everyone is ready to lay out relatively considerable money for its use, because the market is full of other analogues. In addition, some believe that such a waste of money is inexpedient, and in something they are right. Not all engines can feel the advantages of this mm on themselves. In particular, we are talking about vehiclesproduced in Russia and Ukraine.