When a motor oil is replaced, motorists are sometimes wondering - how to rinse the engine? This question is especially relevant when buying a used car with mileage, when it is not known which lubricant is filled with an old power unit. In this case, it is recommended to pour a new oil recommended by the automaker, but before it is better to rinse the lubricant system using special additives or oil.
Some motorists use flushing fluids for the engine with each planned replacement of lubricating composition, since it is worthwheeling relatively inexpensively. Is it possible to wash the engine so often or can it harm him?
Varieties of washing liquids
Today, the auto shops offer a large variety of liquids for washing the engine when the oil is replaced. Each manufacturer seeks to make an attractive packaging and advertise the realizable product, lifting its multiple advantages. In fact, many auto mechanics and experienced motorists do not see the difference between different flushing. All flushing fluids are divided into two categories:
- Long exposure. Similar special fluids Fill into the engine after the drain of the old oil. After that, you need to drive 200-300 km so that all the internal elements of the DVS are cleaned.
- Fast fluids. On average, similar compositions need to be poured 10-15 minutes after draining the old liquid. After that, the motor must be started and leave to work on idling.
The most popular additives in a purest state, manufactured by such well-known companies as liquida moths. The manufacturer won the market for a long time. Proposed additives for short term Very well clean the insides of the motor.
What are flushing fluids?
"Five minutes" from high-gir
Oils for washing engines Before replacing the oil are created by different technologies, but many of them contain such components as:
- Quality base. Manufacturers use industrial mineral oil, among which the compositions are very popular and-40 or and-20.
- A small amount of aggressive additives dissolving dirt and deposits accumulating inside the motor.
- Additional additives minimizing the negative effect of flushing on the internal parts of the engine.
Waskening with a long effect create a gentle effect on the engine and safe for gaskets and other rubber elements. When filling the motor industrial oil The driver must adhere to certain precautions. Experts advise ride in gentle mode to avoid intensive motor wear.
Among the motorists are quite high demand and on another species washing fluid, called varietal oil. The liquid is poured into the engines of new cars Many official service centers and dealer stations.
Is the washing oil safe?
Now we turn to the question, is it safe to wash the engine while replacing the oil? Of course, some of them can harm, but in general, liquids are safe and even useful. Along with a multitude of flushing additives in auto shops, proven flushing fluids are proposed.
The process of cleaning with oils is similar to the use of additives. The duration of the operation of the motor on the XX after filling the liquid is indicated on the package. The main thing after that thoroughly merge lubricant composition From the engine to avoid subsequent destructive impact.
It should be noted that the use of special flushing fluids is safer, compared with additives. This is explained by the content of many detergent additives in the liquid. Fluids are not suiced, and for washing it may be necessary up to 10-15 liters, depending on the volume of the engine.
How is the washing?
What kind of engine wash is better to use further, but in any case you need to get acquainted with the technical documentation for the car or consult with the expert. When using flushing fluids before changing the oil, you need to do the following procedures:
- Diagnose the state of the vehicle engine.
- Buy the required amount of engine oil recommended by the automaker.
- Merge waste fluid in the maximum volume.
- Pour the selected flushing oil into the engine and leave the motor to work at idle for a certain time (specified on the package).
- Drain the flushing with the remnants of the old oil and fill the motor suitable oilrecommended automakers.
Is it possible to use diesel fuel?
Many experienced motorists are familiar to such a way of washing the engine, as using diesel fuel. The diesel fuel really removes the nap and other deposits, eating different pollution. At the same time, she does not have lubricants, so experienced auto mechanics had to deal with overhaul of engines due to jamming crankshaft As a result of such a flushing. In some cases, it is possible to limit the disassembling of the motor to turn the crankshaft manually, after which the engine is filled with fresh washing composition. In this case, the overhaul is not required, but the work in any case is labor and notable.
What are used for flushing diesel engines?
Experts note that wash diesel power units Before replacing the engine oil, you need using a special substance created on the base of the diesel fuel. When operating a diesel unit, a special protective film appears on its inner walls, which ensures the necessary protection. Application chemicals Violating this defense and exacerbates the situation. Accordingly, the owners of cars operating on dieselkers are interested, do you need to wash diesel engines or do not do it better?
Recipe for pre-sale preparation from classic
Then they poured into the engine oil, the most thick, which was only found. The cylinders were not the best and slightly knocked. This was reimbursed by a thick lubricant, the engine worked amazingly quiet.
Erich Maria Remarque
Fierce disputes of supporters and opponents of the engine washing when replacing oil recently aggravated due to the fact that new cars in the country are now sold much less than used ones. That is, citizens sell cars to each other, and the renewal of the park, to which everyone was so hoping, slowed down significantly. Meanwhile, a used car, as you know, is a cat in a bag. What is the age and quality of the substance, which splashed in the engine at the time of sale, - one God is known.
From here immediately follow the abstracts about the need for washing.
When washing is not required?
- You are the first and only owner of your car;
- You are always on time (and better - more often);
- You are confident in the service in which the work was carried out (servicemen were not scheduling, without replacing the oil at all or replacing it to their, cheaper);
- In the long road you never had to top up.
When is it better to wash?
About flushing should be wondering, acquiring a car from the hands, and even with an opaque service history. There are instances of engines, whose deposits from the top of the engine can be straw in literally shovel. To do this, it is advisable to look at the flashlight in the oil-tank neck, and in the side: the ear sellers may well wipe the visible parts of the cylinder head parts.
Another case -, for example, when switching from mineral water to synthetics.
Washing options
Wash the engine in several ways.
Five-minute flushing. It is poured into the engine before replacing the oil, mixing in this way with the exhaust oil. Next give the engine to work on idling five (or ten) minutes, drain through the work, poured fresh oil And put a new filter.
Flushing with which you can drive some distance. For 100 km of mileage to the alleged oil replacement, it is poured, and during this meringue they are trying to do not particularly strip. Next is the standard oil change and filter.
Wash oil. In this case, the exhaust oil is drained and a special flushing is poured instead. Give the engine to work at idle and drain flushing. Put a new filter and pour new oil.
Excessive portion of oil. The method, especially recommended when changing the type of oil base, for example, when moving from mineral to synthetic. It can also be recommended for pretty dirty engines, one of the three methods above. Drain is an old product, pouring the oil on which the engine is further exploited.
The amount of oil can be minimal (liter two), only to go out. In this case, it is also recommended to drive a motor idling. Then this volume is replaced with new oil with the installation of a new filter. For particularly caring owners there is a modification of this method: new, riding a short time, and then spend another replacement. At the same time, at the intermediate stage of the oil, it will be necessary to pour no less than the lower label.
Watch out for the pressure of the oil when the engine is running on all the above cocktails, except the case of the fill of an extra serving of oil. Be especially careful when washing diesel and upgrade engines - they are usually somewhat higher and the oil starvation is completely unacceptable.
Cheap - angry
On the Internet, the engines of diesel engines are proposed on numerous forums, and both clean and diluted in half with engine oil. I adhere to the opinion that fuel is fuel, and rinse the engine is better than one of the above methods. The solar bath can be very unpleasant to the glands and other rubber engine seals. Liquid is very aggressive.
- Try not to release your car during this procedure. So you will be sure that you poured new oil and installed a new oil filter.
- If you failed to execute the previous advice, then when accepting a car, look at the level of oil on the dipstick. The oil should reach the top mark and be fairly light. Although in gasoline engines, even after a short work, it can darken somewhat, and even in diesel engines. And yet it will be much lighter than before replacement.
- Try to determine whether the filter was replaced. On some cars, it is visible on top, on others it is only available with the removal of the mudguard or engine protection. In this case, make sure whether there are traces of dismantling on these elements.
From personal experience
I have acquired somehow a good friend. Mileage - about 100 thousand km. I knew the history of the car very well, as it often helped with repair. There were malfunctions suspension (bearings and shock absorbers), the rear brake cylinders "snapped", the driver's seat was seized. But here, becoming the owner, I decided to look into the engine, adjust the valves. The gaps had to be touched only on several valves and then on a little bit. And most importantly: I shocked the complete absence of deposits under the valve lid. Details were only a little covered with a light golden rode. And I still screamed the former owner that he changes more often than the benzobak fills! ..
conclusions
It is best to change the oil at least 7.5 thousand km, that is, twice as more often than the most automakers recommends. In this case, regardless of the conditions of operation (city or village) you are guaranteed to avoid accelerated wear of the engine parts. Only who has a car "from New", then it should be immediately followed by this rule, and the owners of Second Hand first make flushing operations as indicated above, and then comply with the same recommendations.
More information about motor oil and additives - in a selection of publications "driving" "Motor oil: what and why pour?".
Dear readers! In the comments, tell us about your attitude to the washing of the engine. Do you need, in your opinion? Do you spend?
The engine's engine oil directly depends on the operation of the engine, so the experienced motorists are trying to "feed" the engine is extremely high-quality and suitable on the characteristics of lubricating fluids. As known, motor oil (Mm) It is necessary to periodically change, since in the process of its use, the lubricating composition loses part of its properties and becomes unsuitable.
How high-quality would be liquid, all sorts of pollution and the naiga will be formed on the components of the motor. Because of this, the engine can not work on full power. Of course, almost all engine oils have detergents, but most often they lack them to fully remove the accumulated deposits. To avoid this is recommended to wash the engine. However, in some cases, this procedure is not mandatory, consider them in more detail, and we will also figure out what is washing oil.
Wash oil (types and characteristics)
Today, for washing engines, there are a wide variety of compositions, for example:
- Specialized flushing remedies floating in the engine immediately after you have merged the exhaust oil. Mineral oil liquids are manufactured. Such compositions are sold not in each store, so it is better to clarify the presence of washing oil in advance.
- Fluid-five-minute. These flushing compositions differ from other analogs by the fact that they are manufactured on the basis of diesel fuel and include powerful solvents and aggressive additives. Such liquids are poured directly into the oil that is planned to be changed.
Five-minute fluids have a negative effect on sealing elements. In addition, they can change the composition of the newly bore oil not for the better. What to use as a washing oil?
It is best to use specialized flushing or ordinary engine oils. In the latter case, it is best to use "Synthetic". The point in the synthetic flushing oil is distinguished by the stability of its properties, so it is recommended to use both for washing and for ordinary fill. But if we are talking about specialized compositions, then all of them are made on a mineral basis.
The main advantage of ordinary washing oil is its safety and efficiency. It can not clog oil channels and does not affect the sealing elements, as it happens when using a five-minute one.
In which situations it is necessary to use washing oil
Very often, motorists argued on the topic whether the washing oil is needed when the oil is replaced. Some believe that this procedure does not bear any benefit and does not affect the wear of the motor, but even on the contrary, it brings one harm. Others are confident that without flushing can not do and it is necessary to perform it with each replacement of mm. In the first case, there is only a share of truth, as the washing oil cannot damage the motor, therefore such "opponents" are likely to mean aggressive five-minute fluids. On the other hand, the engine washing is not always justified.
First of all, it is worth saying that all engine oils include various additives with detergents, anti-promotional, antioxidant and other properties. If cars vehicle It is operated correctly, and gasoline is filled extremely high-quality, then no deposits on the details of the engine should not be left. However, where is the guarantee that refueling to which you driving daily, sells exclusively high-quality petroleum products?
If we talk about when the washing is not necessary, you can safely do without this operation if you:
- acquired absolutely new car;
- never poured into the engine cheap oil or completely assured as a liquid that is constantly using;
- completely trust the quality of fuel on the gas station.
If we talk about when you need to use flushing oil for diesel or gasoline engine, then everything is obvious:
- when purchasing a used car;
- with a frequent change of various gas stations;
- if antifreeze hit the engine;
- after mixing different lubrication liquids;
- when switching to another classification mm (for example, with SAE on the API).
The rinsing process itself does not differ in any features, so it can be done independently.
How to apply flushing oil
For flushing you need:
- flushing liquid;
- capacity for the drain of the waste mm (a plastic bottle of 5 liters is suitable);
- new oil filter (2 pcs).
The car is better to put on the lift or drive it on the pit. After that, you need to wait a few minutes until the motor cools and you can start following operations:
- Under the bottom of the car, locate the cork drain hole, Install the drain container under it and unscrew the cork.
- Wait until the used oil rides, and tighten the hole for the drain.
- Fill the flushing into the engine.
- Replace the old oil filter to the new one.
- Start the engine that should work at idle about 10-15 minutes. But it is better to ride on flushing fluid about 40-50 kilometers, it is enough to completely clean the motor. At the maximum turnover, it is better not to ride.
- Drain the washing liquid from the engine and change the filter.
- Fill new engine oil.
Important! When using specialized washing oil, the old liquid must be merged with a hot motor.
Note that after washing the replacement MM should be twice as often. So if you usually changed lubricant liquid Every 10,000 km, now the oil will need to be changed after 5,000 kilometers.
If we talk about what flouse oil is the best, then the main priority is a liquid producer.
Best manufacturers of washing oils
Choosing a specialized flushing oil better give preference to manufacturers who are responsible for the quality of their product. Today there are several companies that car enthusiasts allocate among the others.
Lukoil
This company is a manufacturer high-quality oil. An image of packaging with so oil is shown above. Washing oil for the LUKOIL engine has excellent properties, including:
- dispersion;
- good solvent;
- excellent detergent.
As the basis, the washing oil of LUKOIL auto contains mineral liquid, as well as a special package of detergents, thanks to which it is possible to quickly clean the motor from any type of deposits and complexity.
For sale LUKOIL oil in 4 liter canices, worth about 300 rubles.
TNK
Washing oil TNK is a universal liquid, with excellent properties. Universality means is that it can be used for both new engines and for old or diesel engines. The fact is that the TNK liquid does not affect crystallizing deposits, due to which numerous microcracks (which is provided in the "experienced" engines) do not open. In addition, mineral-based liquid prevents oxidative processes.
If you have exploited a car in extreme conditions, violated the mode of changing the engine oil or mixed somewhat different compositions, then it is best to use liquid for washing from TNK. It is for sale in a tire of 3.5 liters, and costs from 200 to 500 rubles.
Shell Helix.
Shell offers car owners washing oil made on the basis of organic solvents. It is worth so pleasure, since for a small bottle of flushing with a volume of 0.5 liters will have to give about 370 rubles. But such a relatively high price is due to the excellent properties of the liquid. Washing shell oil Effectively, quickly and delicately cleans from nagar, precipitation and dirt. In this case, the rubber elements of the engine do not suffer.
Rosneft
Rosneft flushing oil as well as the remaining analogues is made on a mineral basis with the addition of detergent additives with high efficiency, gently and quickly cleansing the car's motor. Used for all types of motors and allows you to get rid of serious contaminants. Available in 4 liters containers, and stands within 490 rubles.
MPa-2
The oil washing MPa-2 also demonstrated itself from the best side. As well as all MPa-2 liquid described above ensures efficient engine care and allows in short time to get rid of slags, nagar and other detrimental formations. Sold in the canister of different volumes. The cost of fluid is about 300 rubles for 4 liters.
In custody
It is necessary to carry out the engine washing at the transition to another type of oil, for example, if you decide to get off "mineral water" on the "synthetic". All the arguments that washing the engine when changing the oil can "kill" the engine has no logical justification. It is possible to reduce the service life of the engine just that, if you pour into it "What I got" and does not delete contamination on time. The main thing is to replace the oil and washing the engine in accordance with the recommendations and tips of the manufacturer of your car.
Determines the operation of the engine as a whole. Over time, various contaminations can be formed on the components of the motor, with the result that the engine can not work at full power. In such cases, a flushing of a motor is required. Today we will tell you what washing oil for the engine, how the engine was washing, and also tell you what fluid it is better to choose.
[Hide]
How to use wash oil?
To properly use step by step instructions. To make it qualitatively, you will need:
- flushing liquid;
- new oil filter;
- rag;
- capacity for collecting spent engine oil.
It is also desirable to find a garage for convenience. If there is an opportunity, then the car must be put on the lift. So, proceed to washing:
- We heat the car to the pit and give the engine a little cool, so as not to burn the skin with a possible hit on it motor fluid.
- We climb under the bottom of the car and find the plug of the drain opening of the engine oil (hereinafter - mm).
- We substitute the container under the hole and unscrew the cork.
- We are waiting for 20-30 minutes, until the entire consuming material is somewhat.
- When all used MM merged, tighten the hole for the drain, pour the washing material into the motor.
- Remove the old oil filter, put a new one.
- Turn on the engine, let it work for some time. At the same time, it is better to ride a car on the roads and "roll" at least 30 kilometers, the more - the better. Some experts advise ride on flushing fluid for several days, but in practice 40-50 kilometers of travel allow you to clean the motor. It should also be noted that it is impossible to overload the engine, that is, you need to try not to ride at maximum turns.
- We repeat the fluid drainage procedure from the engine. Here you will also need a new oil filter.
- Now you can fill a new mm.
Nagar and sediments inside the engine of the vehicle - the need for cleaning Please note: after washing the motor, the fluid replacement should be made twice as fast. That is, if you usually replace MM every 10 thousand milence, then after washing the motor, it should be replaced after 5 thousand km. If you doubt that the engine was completely cleaned, then replace mm after 3-5 thousand km of mileage, the motor will not harm.
A brief overview of the main brands of washing liquids
Zic
PJ brand "ZIC" is intended for dissolving sediments and dirt in the engine of the vehicle. This substance, according to the manufacturer, has excellent detergent. According to official data, it also prevents the occurrence of corrosion and foaming of the lubricating fluid.
PZH "ZIC" does not affect the negative manner on the sealing compounds, and also allows you to increase the resource of both the motor and the elements of the transmission system. In addition, the substance retains the properties of the engine fluid, which is used after washing the motor. Also, the PZ is preventing the oxidation of engine parts.
Rosneft
PZ Rosneft is a mineral MM, which is based on the combination of effective additives of Russian and foreign manufacturers. Rosneft is used for operational and efficient cleaning motor system in diesel I. petrol engines. According to the manufacturer, the PJ can reliably and quickly clean the motors from Nagara and sediments, which appeared as a result of the operation of the vehicle.
- after long-term use of mm;
- for prophylactic motor cleansing.
Spectrol
PJ "Spectrol" is used in diesel and gasoline vehicles for the purpose of prophylactic flushing of the motor system without their analysis. Also, the spectrol allows you to eliminate malicious deposits that appeared in the engine of the machine as a result of long-term use.
The main purpose of this pzh is the conclusion of the precipitate, which remained after the drain of the waste mm, outward. According to the manufacturer of a substance, a negative chemical impact with the components of a motor during washing is minimal.
Liqui Moly.
Pzh " Liqui Moly.»Also designed to clean the motor from contamination. To date, this PJ is most popular by rating among Russian motorists. The Internet is full of reviews and messages on the use of this fluid, and on the forums motorists actively discuss the efficiency of using this brand of PJ.
Like any substance for washing, "Liqui Moly" clears the motor from the malicious car formed and other deposits that can reduce the operation of the engine.
TNK
PZH "TNK" is intended to purify the oil system of vehicles domestic production Immediately before replacing mm.
"TNK" is made on the basis of mineral Oil With the use of specialized cleansing additives and components. The manufacturer guarantees complete cleaning of the motor from a car, all kinds of third-party impurities and sediments that are formed in the motor lubrication system.
It should also be noted that the "TNC" includes antipane additives that allow to ensure efficient cleaning of the motor in any conditions.
How to choose a washing liquid?
Many car enthusiasts are given by the question "What PJ is better to use". To date, on the domestic market, you can find both mineral and semi-synthetic pzh. But what substance is better to use it unknown to anyone, since even experienced specialists cannot give a clear answer - than "graziness" better "mineral water" and vice versa.
However, data manufacturers supplies Release and synthetic pzh. It makes itself felt the well-thought-out move of marketers. In particular, the car enthusiast, guided by the principle "for my iron horse Only the best, "without any questions gives his money even, not realizing that he did not need it. Even if the vehicle is relatively new and washing its motor is required.
In fact, the PJ must be used in cases where the traces of pollution and deposits are clearly visible when draining the spent mm. In other cases, the engine cleaning is inappropriate - the driver just throws his money to the wind. As for what kind of pzh is better to choose, then everything is individually. If the manufacturer advises to exploit a semi-synthetic mm, then the flushing of the motor should also be carried out by "semi-synthetic".
The same applies to additives. If the auto manufacturer pointed out clear recommendations for one or another additives, then when buying a PJ, it is necessary to pay attention to their presence in the composition of the substance. Anyway, but for domestic cars Using "TNK" or "LUKOIL" - these liquids are effective and collect multiple positive feedback online.
Video "Wash oil"
In this video, the handicraft technology cleaning engine is demonstrated.
This question is very controversial for mechanics and motorists. In today's article, we will look at what is washing oils for the engine, product reviews of LUKOIL and much more.
Different opinions
Some motorists believe that the flushing of the motor should be performed regularly. Others are confident that the benefits of this operation is practically no, and during the drain of the old oil, the new oil is poured into the engine. And immediately, without any flushing.
Opponents of the engine washing argue that properly operation No car and sediments are formed in the motor in the motor, respectively, this operation is only throwing money to the wind. Supporters, on the contrary, are inclined to believe that the quality of fuel on domestic gas stations is not the best. Therefore, the washing oil for the engine should be applied regularly.
And what if the acquired car is not new?
Before buying such a car, you should also see the service history or to diagnose it at maintenance stations. So, when identifying any problem, you will have a reason to bargain with the seller and bring down the price.
But still return to our main theme. When should I use washing oil for diesel engine and gasoline? We will tell about this below.
In what cases is not needed?
This operation should not be made in three cases:
- If you acquire a completely new car.
- Never pour cheap oil into the motor or absolutely confident in his quality.
- Completely confident as a fuel that purchases for gas stations.
When is required by car flushing?
Everything is very simple here. Use the washing oil for the engine (both gasoline and diesel) follows when buying a used car. That is, when you do not know that the former owner poured behind the fluid and with which interval I replaced them. You should also wash the motor with frequent shifts of refueling (for example, with long journeys). It is recommended to produce this operation when replacing one type of oil to another. For example, if you replace the synthetic on semi-synthetic or mineral water.
Thus, if one of the above cases takes place, you need to acquire a washing oil for the engine. Prices for it are different - from a hundred to a thousand rubles per canister. The volume of each average is 4 liters.
What to produce flushing?
At the moment, the shelves of auto shops are simply filled with the assortment of goods, respectively, to make right choice It is difficult even experienced motorist. What to stop your choice?
Standard fluids
Most. the best optionAccording to motorists, there will be a purchase of ordinary engine oil, which is not enough for 15 minutes of work, but by 3-5 thousand kilometers of run. The essence of washing is as follows. High-quality engine oil is poured into the car, and the motorist drives a third of it from the producer of a kilometer. Thus, the liquid is capable of flushing all dirt and deposit from the inner parts of the motor, including the cylinder-piston group. Moreover, the danger to the engine is not at all at all, since the tool does not have aggressive potent substances in its composition. An example of this can serve as a five-minute oil. But about them a little later.
The main plus washing with ordinary oil - safety and efficiency. For 3 thousand kilometers, it will highlight the surface of oil channels from sludge and sediments, as well as various dirt in the area of \u200b\u200bthe oil worker. In this case, the cleaning of the motor occurs in stages, without the risk to clog the oil channels by sediments, as in the case using more aggressive and high-speed substances.
Well, what to do next? After the drain of this oil, you can safely pour a new one. But now no longer for 3 thousand kilometers, but for the entire service life. Often it is 8 thousand kilometers for diesel and 10 thousand for gasoline engines.
Alternative options
There are other cleaning methods. This product can be divided into several groups:
- Wash liquids.
- Special oils.
- Supplements to the oil type "Five minutes".
Let's consider each type separately.
Washing agents
These fluids are poured into the motor immediately after the test of "testing". In its composition, they contain a large amount of detergent active additives and alkali. Products made from mineral oils. How to use washing oil for the engine? After the liquid fell into the engine, it should work at idle turns of about 10-15 minutes. After that, this remedy should be drained, and then fill the motor with a new, ordinary oil. Moreover, after such an operation, you can pour into the engine absolutely any type of oil, both synthetics and mineral water. By the way, such leading manufacturers like "Castrol", "Mobile", "Adjip" and others, have their range of means for washing in assortment. It is completely harmless to the motor. However, they can not always be found in Russia, even official dealers (due to high cost).
Liquid-five-minute liquids
How to rinse the engine with washing oil of this type? The whole essence is as follows. The concentrate of detergent additives is poured before replacing in the old oil and works from 10 minutes to 200 kilometers. Next, the liquid merges, and ordinary oil can be poured into its place. Everything is similar as in the washing products that we have previously told. However, five-minute fluids are somewhat different from their secure analogs. First of all, they are made on the basis of diesel fuel and a mixture of powerful solvents using aggressive additives. The latter, judging by the reviews of motorists, do not always correctly behave during cleaning towards gaskets and other seals. It is also possible that the residue of this fluid can change the composition of the new oil, which is filled after washing the motor. As practice has shown, the volume of five-minute fluid after a drain can be about 500 milliliters.
It is worth considering that even the best wash oil for the engine is able to wash only the light fractions of slags and deposits. As for the thick clusters of paraffins and resinous sediments, it is possible to remove them only by mechanical way. To do this, it is necessary to remove the pallet of the engine and valve cover. Therefore, if you have suspicion of the above factors, then you should do mechanical cleaning per service station.
A little different things are the maintenance of the newly acquired car. In this case, you will rather wash the motor through one or two technical inspection (for modern cars Such a gap is about 10-20 thousand kilometers). So you eliminate the possibility of accumulation on the parts of the CSM large number of resins and deposits, which will significantly extend the service life of the motor.
Mechanics recommend pouring into the motor only verified, branded oils, preferably higher classifications. Also pay attention to the viscosity of the fluid. For the average latitudes of Russia, the products are suitable for viscosity of 10W40 or 15W40. It behaves perfectly both under heat and at medium frost. In order not to guess with the characteristics, you should look at the automakers' recommendation that is in the manual. Also, due to the frequent cases of the appearance of fakes, it will be necessary to request the certificate from the seller to some kind of oil.
Wash oil for the engine: how to choose?
To do this, it is enough to see the reviews of the car owners. According to them, we allocated the top three manufacturers of manufacturers for cleaning the engine:
- LUKOIL. Judging by the reviews, this tool perfectly cleans the dirt and has anti-wear properties. Also this oil It has a good set of additives. Most motorists recommend using it.
- Funds from the Tyumen Oil Company (TNK-Oil). Motorists say that this oil has excellent stabilizing and dispersing properties. However, the dirt is flushed out of magnitude worse than LUKOIL.
- "Very Lyuba" (Verylub). This agent includes a whole range of additives. Among them should be noted anti-wear, anti-promotional and clean-dispersants. All of them allow you to produce high-quality, fast, and most importantly, safe cleaning of the car's motor.
Products of LUKOIL
Now we will look at the domestic flushing oil for the LUKOIL engine. This agent is made on the basis of mineral oil and is a composition of highly efficient cleansing additives. Judging by the reviews, the flushing means of this brand have good not only detergents, but also anticorrosive properties. Used to clean engines lubrication systems internal combustion Without their mechanical disassembly when changing the oil. Allows you to quickly and effectively clean the system from deposits and sludge.
How to apply?
Wash oil for the engine from LUKOIL should be used as follows. Initially, you need to warm up the engine (let it work about 20 minutes at idle). Next, you need to drain the old oil and pour the washing in the volume you need to fill the oil system. After that, you should run the motor and give it to work without podagazovka about 10-15 minutes. Then pinch the cleaning fluid. Finally, a new filter is set and fastened fresh oil.
Benefits
The manufacturer notes the following advantages of this fluid:
- Effective cleaning and removal of deposits from the parts of the car lubrication system.
- Reducing the wear of the rubbing parts of the cylinder-piston group.
- Reducing the risk of engine overheating.
Also, if the engine washing oil will be applied regularly, the motor resource and its power will increase significantly. Recently washing means "LUKOIL" received approval from OJSC AvtoVAZ. Thus, the motorist does not risen to run into poor-quality goods, having harmed its iron friend.
Price
How much is the washing oil for the engine? Prices may be different. So, on the products of this type from LUKOIL, they constitute about 250-300 rubles per canister.
So, we found out that it represents the washing oil for the engine, how to choose it and what types it is subdivided.
