What oil pour into the Honda engine. Which oil to choose for the Honda engine. Best semi-synthetic oil for Honda Civic

[Hide]

Intervals of replacement

For Honda SRV RD1 1997, 1998, 1999, 2002, 2004, 2008, 2010, 2012, 2012, 2014 and other years of release, the manufacturer advises changing lubricant at least than after 15 thousand km run. This rule on the replacement of fluid in cars operating on gasoline or diesel, is relevant during the operation of the vehicle in ideal conditions. If the machine is used in big city And often works in the "Start-Stop" mode (in traffic jams) or on high dusting roads, then the periodicity of the replacement should be reduced at least up to 10 thousand km. The optimal oil change interval is 7500-10000 km of mileage.

The user Yuri Danger spoke about how the lubricant is performed in the Honda CVT car.

Replacement frequency may be lower when such signs appear:

1. The power unit began to work louder than usual. If drunk parts are smeared normally, then during operation they will not publish outsided sounds. During the use of old oil that has lost its properties, the motor will work as louder, especially explicitly appears when it starts. If the fluid does not possess initial characteristics, the elements of the DVS are subjected to greater friction. With a decrease in the lubrication level in the system, the driver can hear the sounds of metal parts. This suggests that the volume of fluid in the unit has decreased to critical. The owner of the car must be unsaluable to change the lubricant or add it to the system.
2. The car enthusiast sees either the exhaust gases feel. From the point of view of environmental friendliness, modern cars Significantly superior to older cars with worn engines. As a result of equipment power aggregates Catalytic converters and improvement of structural features The functioning motor will not do the exhaust. When using high-quality lubrication from the muffler, transparent exhaust gases come out. If the exhaust similar to smoke appears from the pipe, this may indicate the use of poor-quality oil that has lost its properties. In the exhaust gases there should be no smell of the burnt lubricant.
3. The engine began to function unstable. In the exhaust oil, microparticles are formed that clog the filter element. Therefore, circulation lubricant The system is broken, as a result of which the power unit cannot operate at constant speed. When pressed on the gas pedal, insignificant at first failures are felt.
4. The appearance of the indicator in the form of an oilbox on dashboard car. The reason for sunbathing icon on the shield can be different, but usually it is associated with a disadvantage. motor fluid In the lubrication system.

Which oil is better to choose?

Let's focus in detail on what oil is suitable for Honda CRV. The manufacturer recommends filling the original production fluid in the B20B motors. This refers to the product Honda Ultra Ltd 5W 30 SM. The original is produced in Japan and the United States. American-made oil - Honda 5W30. On average, the cost of the Japanese fluid varies in the area of \u200b\u200b1800 rubles per bottle of four liters and approximately 1500 rubles for american oil In the same canister.

Original Product for Honda Lubrication System

Since 2007, the Honda manufacturer allows the use of lubricants from the Mobile Concern 1. It is allowed to pour into the Japanese car engine and Honda Gold oil. It is possible to find it in the domestic market, although there are difficulties in it. This product is not popular among our car enthusiasts due to its high cost. The manufacturer does not advise to apply Castrol, Shell, Chevron, Zeke or Eneos in the engines of its car oil. These products are left on the inner walls of the engine a large number of deposits and nagar, which is negatively affected by further dVS work. Especially the manufacturer does not recommend using in Honda oil engines released in Russia.

For Honda SRV 5 2002-2006, the manufacturer advises the use of liquids to use gasoline engines. standard API SJ or SL. The viscosity class is notable, depends on the climatic conditions of operation. For cars, SRV 3 2007-2012, release with gasoline engines supplied to the territory of Europe, the use of liquids ACEA A1 / B1, A3 / B3 or A5 / B5 is allowed. If the machines are not supplied to European countries, then the requirements for oils are different - the product must be with the SL API specification or higher. The viscosity class here also does not matter.

IN diesel engines It is allowed to use Honda Lubrication SRV Motor Oil or other oil corresponding to aCEA standard C2 or C3. In SRV models 4 2013 release with gasoline DVSSupposed to Europe should be used by ACEA A3 / B3, A5 / B5 liquids. If the car is not operated in the territory of European countries, then the lubricant standard must be API SM, the use of Honda Oil Motor Oil is allowed. In 2015 gasoline engines, the release of 2 and 2.4 liters are flooded by ACEA A1 / B1, A3 / B3 or A5 / B5. In diesel units, the use of Honda Diesel Lubrication Oil 1 or ACEA C2 and C3 products is allowed.

Original oil for CR-V

Choosing a filter

To replace the oil, you need to select a high-quality filter that can be selected contaminated from the engine fluid. According to the official regulations, the use of Honda filter devices is recommended. With their absence, the use of oil filters Bosch, Vik, Sakura, Piaa, JapanParts, Kamoka, AMC, Starline, Clean Filters, Profit, etc. is allowed.

According to user reviews optimal options Consider original filters, as well as Bosch products.

Level control and required volume

To understand how much you need to pour lubricants into the engine, read the technical manual, it indicates all the recommendations regarding its volume. About 4 liters of fluid are poured into two-liter power units, in the volume of 2.4 liters, it is necessary to pour about 5 liters of lubrication. To control the level, open the hood of the machine and find the diploma installed in the motor. Remove it and clean the cloth from oil residues, the level diagnosis is performed on a cold engine. Then set the probe back and get out again. Ideally, it is necessary that the lubrication level be between two MIN and MAX marks. If oils are more, it must be merged when less - add.

Replacing oil with your own hands

Change the oil in the engine Honda SRV 2, 3 or 4 generations can be independently.

Tools and materials

Prepare in advance:

• fresh oil;
• filtering device;
• new seal for drain hole;
• set of wrenches;
• filter puller, chain or screwdriver;
• tar, which will be used to collect spent lubricant - bucket, basin or trimmed bottle.

User Andrei Florida clearly showed the process of replacing lubricant in the Motor Honda SRV.

Algorithm of action

1. Calculate the car into the garage with the pit or on the flight. If possible, use the lift, it will be more convenient. Wait for some time, let the engine cool, but the unit should not be cold. Since warm oil has an ideal viscosity to drain the maximum fluid from the system.
2. Climb under the bottom of the vehicle, on the cylinder block you will see a hole that is used to drain the lubricant. Substitute a container to collect a used product. Unscrew the plug by a wrench, this will lead to the fact that the liquid will start flush from the engine. For draining testing, it will be necessary not less than half an hour.
3. When the lubricant is drained, tighten the hole stopper and open the plug-in neck. Through it, add about 4-5 liters to the engine washing oil, depending on the volume of the power unit. Tighten the lid and boot the motor so that it warms it. You can perform a checkpoint or alternately enable all transmissions on the box by adding gas to increase the number of revolutions. This will make it possible to disperse the washing medium through all channels of the oil system.
4. Repeat the drain procedure and evaluate the quality of the fluid. If the flushing is too dirty, wear products, carbon or deposit remained in it, the cleaning process must be repeated. But usually one time enough to remove contaminants.
5. Spin the plug hole, after installing a new gasket on it, and make dismantling filter. Try to unscrew it with your hands. If it does not go, use the puller. If there is no fixture, push the filtering device closer to its bottom with a screwdriver, away from the thread so as not to damage the engine elements. Remove the filter counterclockwise using the tool as a lever.
6. Install B. planting place New filter, previously pumped into it about 100 grams of engine oil. In the thread area on the device there is a rubberized flange that needs to be lubricated with liquid. This is done so that in the process of operation the filter does not come to the installation site. Otherwise, the subsequent removal will cause difficulties.
7. Through the filling neck, add the oil to the system corresponding to the nominal volume. Control of the level of fluid is performed using the probe. It is necessary to ensure that the amount of lubrication is between MIN and MAX marks.
8. Tighten the fuse cover and follow the control trip. Then, again, drive the car into the garage and after 30 minutes, check the oil level in the engine. If necessary, add lubricant. Also check the drain plug for fluid leakage.

Each car manufacturer in the manual to the vehicle prescribes the characteristics of the lubricant suitable by parameters for a particular type of engine. In our article, we will talk about the recommended engine oil for Honda CR-V.

Scheme 1. Selection of viscosity depending on the temperature range by the car.

According to the scheme, such lubricants should be applied:

• 0W-20; 0W-30; 0W-40; 5W-20; 5W-30; 5W-40, in the temperature range from -30 0 C (or less) to + 40 0 \u200b\u200bs (or more);

Honda CR-V III 2007 - 2012 release

Based on the Honda CRV operating instructions, it is recommended to use lubricants that meet the following characteristics for this model.

Machines equipped with gasoline automotives.

1. Cars supplied to Europe:

• according to the ACEA system - Types of oils A1 / B1, A3 / B3 or A5 / B5.

The use of such cars contributes to savings fuel mixes. To select lubricant for Honda CRV, use the scheme 1.

Scheme 2. The dependence of the viscosity of gasoline cars (supplied to Europe) from the temperature indicators of the region in which is operated vehicle.

According to this scheme, it is necessary to pour:

• 0W-20, 0W-30; 5W-30 when the temperature range from -30 0 s (and less) to + 40 0 \u200b\u200bs (or more);
• 5W-30 at temperature conditions from -20 0 s to + 40 0 \u200b\u200bs (and above).

The use of lubricant 0W-20 reduces fuel consumption.

1. Machines not supplied to Europe.

According to the manual, to ensure performance characteristics And the durability of the motor, it is recommended to fill the original motor fluids of Honda Motor Oil, having parameters:

• according to the API standard - classes of SL oils or higher.

According to viscosity indicators, the machine is selected according to Scheme 2.

Scheme 3. The dependence of the thickness of the engine oil, for gasoline engines (not supplied to Europe) on the temperature behind the car.

According to Scheme2, the following lubricants are used:

• 0W-30; 0W-40; 5W-30; 5W-40, if the air temperature is from -30 0 c (and less) to + 40 0 \u200b\u200bs (or more);
• 10W-30; 10W-40 at a temperature range -20 0 s to + 40 0 \u200b\u200bs (and above).
• 15W-40 at temperatures from -15 0 s to + 40 0 \u200b\u200bs (and above).

* - For machines equipped with a motor oil level sensor, the specified machine is not used.

Filling of liquid 0W-30 contributes to the economy of a combustible mixture.

Diesel cars

• original motor lubricants Honda Motor Oil;

The viscosity characteristics of the machine are selected according to Scheme 3.

Scheme 4. The dependence of the yield strength of the car for diesel engines, on the temperature behind the car.

Decoding scheme 3 is similar to Scheme 2.

The use of Motor liquid 0W-30 makes it possible to reduce fuel consumption.

Honda CR-V iv 2013 release

Gasoline power units

According to the manual, it is necessary to use motor oils having characteristics:

1. Machines supplied to Europe

• by aCEA classification - A3 / B3, A5 / B5;
• according to the classification of SAE 0W-20.

It makes it possible to achieve a decrease in fuel consumption.

1. Cars not supplied to Europe:

• original lubricants Honda Motor Oil;
• by classification API - SM or higher.
• the viscosity parameters of the liquids are selected according to the scheme 4.

Scheme 5. Viscosity of motor oils depending on the temperature conditions.

According to the scheme, you need to pour lubricants:

• 0W-30; 0W-40; 5W-30; 5W-40, at a temperature range from -30 0 C (or less) to + 40 0 \u200b\u200bs (or more);
• 10W-30; 10W-40 If the air temperature is from -20 0 s to + 40 0 \u200b\u200bs (and above).
• 15W-40 at temperature conditions from -15 0 s to + 40 0 \u200b\u200bs (and above).

5W-30 engine fluid reduces fuel consumption.

Diesel machines

According to the manual, motor lubricants are used:

1. Auto supplied to Europe

• branded fluids Honda;
• according to the requirements of ACEA - C2 or C3.
• according to SAE 0W-30 (contributes to a decrease in fuel consumption), if the specified car is not available, poured 5W-30.

1. Vehicles not supplied to Europe

Honda CR-V IV 2.0 2015 release

Automotors running on gasoline.

Based on the instruction, you need to pour the car with the parameters:

• honda branded lubrication liquid;
• according to the classification of ACEA - A1 / B1, A3 / B3, A5 / B5;
• according to SAE 0W-20, in the absence of said lubricating fluid allowed 0W-30 or 5W-30.

Diesel cars

• brand Range Honda Diesel Oil # 1.0;
• according to the ACEA classification system - C2 or C3.

Honda CR-V IV 2.4 2015 release

Cars supplied to Russia, Ukraine, Kazakhstan, Belarus

Autosula requirements are as follows:

• according to ACEA - A1 / B1, A3 / B3, A5 / B5;
• accordingly, with SAE 0W-20 standards, if there is no liquid, use 0W-30 or 5W-30.

In addition to machines supplied to Russia, Ukraine, Kazakhstan and Belarus

• honda branded liquids;
• in accordance with aPI classification - SM or higher.
• viscosity is selected according to Scheme 5.

Scheme 6. Dependence of the viscous characteristics of lubricants from temperature ambient.

According to the scheme uses auto oil:

• 0W-20; 0W-30; 0W-40; 5W-30; 5W-40, in the temperature range from -30 0 C (or less) to + 40 0 \u200b\u200bs (or more);
• 10W-30; 10W-40 at a temperature -20 0 s to + 40 0 \u200b\u200bs (and above).
• 15W-40 at temperatures from -15 0 s to + 40 0 \u200b\u200bs (and above).

Conclusion

Buying a car you need to pay attention not only to basic base (synthetics, semi-synthetic, mineral water), but also take into account the viscous parameters of the lubricant. Fluids for winter and for summer have different fluidity, they are poured depending on the season. The first ensure the launch of the engine without warm-up, the second protect the motor from the overhery. Recommended motor oil for Honda CR-V indicated by car engineers in the manual. Its use is positively affected by the motor and the lubrication system.

In the instructions for the machine, the manufacturer insists on the use of branded car, indicates that the fill of various kinds of additives is unacceptable.

I have a question. I come to the store, but I have the first thing that stands on the shelf. It is said that this oil will suit you. I want to learn to navigate yourself in the oils yourself. How to choose the right engine oil for Honda Civic car?
(Belyalov will decide)

The operation of the engines of certain brands of cars with the same brands of oils may differ. Some motors react perfectly to certain oils, others show less comforting results.

When choosing an oil for Honda cars, it is worth noting important criteria. The manufacturer itself recommends SL, SJ, SM liquids classes. Each lubricating fluid corresponds to any parameters. The Honda manufacturer of Honda for its engines recommends using motor oils with viscosity parameters 0W20, 5W20, 5W30 and 10W30. Let's consider in more detail what it means each of the parameters.

In the inscription 5W20 - the first figure of "5" is an indicator of the viscosity of the oil in frosty weather. The smaller this figure, the greater the fluid flow under negative temperature conditions. For comparison: oils with rates 0W20 begin to thicken at temperatures from -42 to -45s 0. The same thing happens with liquids having 10W30 indicators at temperatures from -35 C 0. When the lubricant becomes thick, it loses its operational properties.

The second digit "20" determines the viscosity of the oil at high temperatures. The greater the number, the higher the temperature at which the oil viscosity remains normalized.

Honda also depends on engine wear. For engines, whose mileage has not yet exceeded the turn of 100,000 kilometers. It is still possible to pour oils with the parameters recommended by the manufacturer - 5W30 or 0W20. For engines exceeded this line, it is better to pour oil with an increased second parameter, for example, 5W40.

However, it concerns motors working with timing belt. For chain design, remain relevant and on large runs.

An important reason, due to which certain brands of the motor are not triggered with Hondami is burnout.

The "combustible" fluids include, such as Shell, Castrol, oil producer oil. Not because they are poor quality, namely, because of high percent of Ugon in Honda engines. Mobil 1 and Liquimoly and Liquimoly oils have the greatest compatibility indicators.

One of the options with the careful selection of engine oils for Honda cars - consult a specialist who spends technical diagnostics Your car. And you can also clarify the data from official dealer Your brand.

Video "What oil to fill in Honda CR-V, Jazz, Civic, Accord, Legend, S 2000, NSX, PILOT"

In some cars, engines operating on the same oil brand show completely different parameters. Some motors feel great with a certain type of lubricant, others show not very nice results. Choosing oil for Honda, you need to take into account several important factors, For example, that the car manufacturer advises to use SL, SJ, SM classes lubricants.

The lubricating fluid parameters always have several differences. For the properties of each type specific indicators are characteristic. Therefore, the Honda manufacturer in the engines of their cars recommends using lubricants 0 / 5W20, 5 / 10W30.

What kind of car is better?

When buying engine oil for Honda, it is necessary to proceed from the existing engine wear. If he did not run 100,000 kilometers, you can continue to use the lubricant recommended in the service book:

• 5W30,
• 0W20.

When the engine runs much more, it is worth starting to upload oil 5W40. But it is suitable only for cars equipped with a timing belt. If the engine installed the chain mechanism, the most appropriate oils will be the most appropriate.

Good to know! Some formulations are not suitable for Honda, as they burn greatly. The list of "combustion" fell famous brands - Shell, Castrol. And it's not a bad quality. This is due to a large percentage of highlighted Honda power units. The most suitable is the products of famous brands - Mobil, Liquimoly.

Honda Ultimate Full Synthetic 5W30

Synthetic, which was made in America, according to the order of Honda. Properties and quality comply with international API requirements, ILSAC. According to the manufacturer itself, the characteristics of such a lubricating composition are much higher than the indicators of similar motor fluids.

Oil is created on the basis of polyalphaolefins. The composition includes unique concentrating additives. This made it possible to get a very high viscosity rate. Its value reached 215 units.

In other words, this lubricant is capable of working at any temperature, and it will not be thick or become very liquid.

Such properties make it possible to use oil in sports. The engine receives reliable protection against heavy loads that you have to test the car.

Honda Ultimate Full Synthetic 5W30 can be used in the newest gasoline installations of Honda cars. If the machine is operated in Russia, the replacement of the car is carried out after 10 - 12 thousand kilometers of the mileage.

Honda Genuine Synthetic Blend 5W30

Semi synthetic oilMade according to VHVI technology. In other words, the basis is the mineral base. For cleaning, a method of catalytic hydrocracking is used.

Such technology allows you to make basic oilwhose quality strongly resembles the synthetics. It differs from synthetic products only by a lower parameter of heat-oxidative stability.

That is why such a lubricating fluid requires frequent replacement. If the machine moves russian roads, full replacement Performed after 7 - 8 thousand kilometers of run. All other indicators correspond to 100% synthetic data.

The lubricant is manufactured in the US by Conoco Phillips. The European manufacturer remains unknown. According to some reports, the composition in Germany is made. It is sold in a completely different package.

There are also analogues issued in Japan Idemitsu Corporation: Honda Ultra Ltd Motor Oil SN 5W30, Ultra Leo and Gold.

Periodicity of oil replacement in Honda Engine

On the deadline for replacement affects a number of circumstances. It should be taken into account not only by the range specified by the retailer, but also challenges, external operating conditions of the vehicle.

The manufacturer claims that it is necessary to change the oil and the filter every 5-10 thousand km. Run. Of course, for replacement recommended original oil Honda.

If for some reason the car owner decided to use analog auto oil, then pre-rinse the engine lubrication system. First replacement for new Honda Civic Perform immediately after running.

Factors that can affect the frequency of replacement:

• season;
• automal properties;
• state of DVS;
• driving conditions;
• age of cars.

Prolonged simple TC, cargo transportation, movement on killed highways and in their absence, the fill of low-quality gasoline significantly reduces the intersavice intervals. In addition, the quality characteristics of the oil decreases the expense of aging and environmental impact.

Machine should be selected taking into account the technical properties of the engine. There are a number of parameters that need to be guided by:

• composition (synthetics, mineral water or p / s);
• standards API - class SL or higher;
• viscosity - 0W-20, 5W-20/30, 10W-30;
• classification of the Association of European Car Manufacturers - C3 or C2 (for DVS on Diesel) and sAE Specification (on gasoline).

The viscosity is selected depending on the climatic conditions of operation. IN winter time Optimal more flowable oils.

For example, mineral water is suitable only with average climatic indicators, since it is unable to fully protect the engine in the heat or in severe frosts, while the semi-synthetic and 100% synthetic are perfectly overcome any temperature differences.

Permissible Honda Oils

For the absence of the original, the automaker recommends Exxon-Mobil oil, namely Mobil 1, since its balanced composition is able to provide reliable protection and exceptional performance.

Although the market has a huge number of well-known oil manufacturers:

• Castrol,
• Texaco,
• Shell
• Chevron
• Liqui Moly.

Please note the studies have revealed that even the ESSO economical representative of Exxon-Mobil ESSO oil is not highlighted in the Honda engine, and Castrol and Shell brand oils - and have the maximum number of unwanted impurities.

The minimum proportion of Nagar in ENEOS made oils, Chevron, but still this is not a panacea, since lacquer deposits are preserved in the motor.

Oils from Korea - Zic and Dragon, behave stable in terms of Nagara, varnish and sludge, however, the opposition to the aging process is extremely not enough. Following the tests, the oils of the German company are canceled, Liqui Moly.

The use of oils of domestic producers is inappropriate (absolute incompatibility with "Hondovsky" engines).

How to choose the motor oil for Honda? The manufacturer itself, most often, if the question concerns the belt engine, recommends SL / SM / SJ oil with 5W30, 10W30 parameters, and 0W20, 5W20 if we talk about the chain engine. What do these figures mean?

So, the first digit is 5 (10, 0), this is an oil viscosity indicator at cold temperature. The less the first digit, the more fluent oil will be at a negative temperature. For example, if the oil 10W30 starts to thicken, and as a result, lose its properties, at a temperature of -35 C0, then from 0W20 this will happen at -43 ... -45 C 0. The most optimal for the choice for the car operated in Russia will be oil with an index of 5W ... for belt engines and 0W ... for chains.

The second digit (number) of the index indicates the viscosity of the oil in the hot environment. The number is greater, the higher the temperature at which the oil does not lose its viscosity. Here, the indicators can be very conditional. You should simply remember one rule - the smaller the engine wear, the more correctly choose the oil recommended by the manufacturer. So, for example, when runs up to 100,000 km, you can safely pour into the engine recommended by the 5W30 or 0W20 manufacturer. When the mileage is greater when microdistrars and production are appear in the engine, it makes sense to pour oil with a higher second indicator, for example 5W40, but for the chain will need to continue 0W20 5W20. The reason for this constructive feature chain engines. Mainly, it concerns the engines of the K series

No less important is the choice of oil producer. Since 2007, Honda Japan has officially recommends an Exxon-Mobil concerning oil for its engines, - Mobil 1. This is the official recommendation for Japan. If something tells you about something, you can safely stick it. I would only like to note that Mobil 1 for the Japanese market is slightly different in terms of the level of overall product quality through the use of more promising lines in the Japanese market. Also, it should be remembered that the recommended Honda Mobil 1 in the Japanese market is more expensive than the most expensive fully synthetic oil of Honda Gold that does not use much popular on russian market Because of the high cost.

In 2007, the tests of the Honda engines for engines have shown that Castrol and Shell's oils have a very high percentage of Ugona in Honda engines. Chevron oils, ENEOS have a smaller percentage of ugara, but leaving lacquer sediments in the engine. Korean zic oil And Dragon, behave more stable in terms of Ugon and lacquer deposits, but, unfortunately, have very little resistance to aging processes. The oil change of 5000 km is significantly reflected in the engine operation for the better. Excellent results at the end of the tests showed Liquimoly oils, in many ways exceeding the original requirements. BP, TEXACO oils, not exposed testing, so we cannot say anything about them anything.

Use of oils russian manufacturers Honda is extremely undesirable. The reason for the high percentage of Ugon, sediments and coke. It does not say about low oil quality, it demonstrates its incompatibility with Honda motors.

Specifically, what oil can be poured into Honda, we would recommend following the following items:

Engine up to 100,000 km, belt - 5W30 (5W40). Manufacturer: Honda (Original), Mobil 1, Liquimoly

Engine over 100,000 km, belt - 5W40. Manufacturer: Honda (Original), Mobil 1, Liquimoly

Engine up to 100,000 km, chain - 0W20, 5W20. Manufacturer: Honda (original)

Engine Over 100,000 km, chain - 0W20, 5W20. Manufacturer: Honda (original).

Immediately I would like to make a reservation - what these parameters are not truth in last instanceBut to stick to them would be most correctly if we talk about a car with an "honest" mileage under the supervision of competent masters. Unfortunately, it is often necessary to hear the accusations of the accusations of bias to manufacturers from a person, - alone, everything was changed in time and used what they were told, and everything died, others lily all their lives "What got" and everything works fine ... What's there to say? Apparently, there is such a concept as "individual features of the car." On the average, on time and competent oil replacement significantly extends the service life of the Honda engine. This is the fact number two.

Honda Vodam.ru.

Another interesting articles

In contact with