Tuning salon VAZ-2109 is a process that interests almost every owner of such a car. When it is completed, it is possible to improve the characteristics of the cabin and its external view. The main task of this process is to improve the sound characteristics of the speaker system. Although it is no secret that the tuning of the VAZ-2109 salon is the simultaneous performance of noise insulation, thermal insulation and improving its appearance.
Why do you need sound insulation?
The owners of many cars are not thinking about the need for sound insulation, because the car goes well and without it. And perform this procedure for several reasons:
What needs to be purchased for sound insulation?
In domestic cars, no one is secret, there is no proper level of acoustic system. And the prime confirmation is the VAZ-2109 model. Salon tuning allows you to achieve quality acoustics sound. During the ride on this car, all sorts of noises are noticeable, which makes a trip with uncomfortable and very noisy. Therefore, the most important thing and necessary, what should be done primarily with the Tuning of the car VAZ 2109, - to conduct noise insulation. For proper Installation Soundproofing requires a set of tools and materials. You will need: Complete knife, roller, heat gun, marker of any color, scissors and roulette, spatula, acetone.
How is the process?
Many are interested in how the VAZ-2109 tuning is carried out (photo). Tuning 2109 do it yourself not easy. After all, the creation of sound insulation is a very important process that needs to pay due attention. If there is no means to make it performed in the service station, then reproduce it quite real and independently. It should be borne in mind that the work is carried out in three steps:
Soundproofing self-insulation
Tuning salon VAZ-2109 can be made with their own hands. This process is true:
- The inner part of the doors is recommended to peel the vibroplast. To this end, it must be tightly pressing using a roller. To facilitate installation, vibration-absorbing materials costs up to 50 degrees. This is recommended to use the usual hairdryer. If available, then the result will be even better because the heating will happen much faster.
- Roll into the material must begin from the central part to the edges so that bubbles are not formed. Although at normal room temperature it sticks well. Some vibro producers have an adhesive surface on one side, which facilitates the installation process.
- The next stage, the remaining space of the car's salon is sampled. The technique of execution should be a joint into the joint. Only after that it is possible to carry out measures for applying the selected it must necessarily go over the vibroplast. Do not forget that the material is applied to the adhesive side to the surface.
- After committing these enough simple actions, namely, after you have been punctured absolutely the entire inside of the car, the details removed and the parts are put in place.
Implementation of thermal insulation
As noted above, the tuning of the VAZ-2109 salon includes thermal insulation. It should be noted that this process cannot be called very simple. After all, for its implementation, it may be necessary for several days. First of all, you should decide on the scale of the work. Naturally, what it will be more, the more efforts have to attach. After all, it is possible to carry out thermal insulation only doors or the entire car. So let's go:
- First you need to fully disassemble the interior of the car. That is, you should remove all unnecessary items. These include armchairs, mirrors, torpedoes, lining. You can also upgrade the stove by adjusting the damper. Therefore, at this stage it is better to remove it.
- Now special attention should be paid to the plugs covering the holes at the bottom of the cabin. If some of them have already been worn out, they should be replaced (as a last resort, make more sealed using the mounting foam). After missing this moment, it is impossible to avoid moisture from entering the car.
Processing of plastic parts
From the processing of metal parts you need to slowly move to the salary of plastic elements. To do this, it is better to use a visomat, since it is much easier established than the vibroplast. Places where parts come into contact with each other, you should be made in a bitoplast. It is necessary so that the glued parts does not creak and have not published any extraneous sounds. Plastic details You need to be bold, starting with the trunk. To do this, they should be removed, after which dismantle and lining.
Next, you need to start processing VAZ-2109. Tuning salon and panels, photos and videos of which will also be useful, occurs according to a specific scheme. Torpedo is covered with foam. Visible gaps need to be seen by the Bitoplast. Special attention It should be given to the slits located between the stove and air ducts. Turning and visor combinations of devices. To do this, use a visomat.
Roof processing
Tuning salon VAZ-2109 includes both the roof. It is necessary to take into account that it is necessary to isolate not the entire ceiling of the machine, but only the intervals between the cross. Vibroplast cuts into pieces that need to be glued accordingly. For the second layer, splen is used. To make it easy to install, it is necessary to heat it a bit, and after - to fix with the help of bilateral tape.
Replacement of a regular steering wheel new
Many owners domestic cars Interested in how tuning VAZ-2109 (photo) occurs. You can make tuning 2109 with your own hands. It should be borne in mind that tuning is a set of actions that contribute to the modernization of the machine. Therefore, it is necessary to make it look more attractive. Many are even solved on the replacement of the steering wheel, which during operation loses its initial characteristics. To perform this process, it is necessary to ensure the power of the steering wheel. Under it should be a lid that you need to remove. Here will be plugs, they should also be disconnected. Slide the bolt to which the steering wheel is attached (it is usually left). To dismantle, you need to pull it on yourself. Installing a new steering wheel occurs in the reverse order.
Upholstery salon
Refinement and tuning VAZ-2109 are also very important. Sometimes the old insanity of the cabin cracks, and it looks just awful. Therefore, many decide to fulfill the upholstery of the seats. To do this, you can use any material with a dense texture. They should also drag the ceiling and hatch so as not to break the stylistics of the machine.
Thus, you can perform a car tuning on your own. To do this, it is recommended to purchase a special set consisting of all the necessary parts.
This part of the changes is the most noticeable for all other motorists. The simplest thing is that the owners are solved - this is the installation of various collaps, replacing bumpers, etc. This species Tuning VAZ 2109 will definitely not harm as possible if you are going to make the engine, box or suspension.
Floor options Infinite set. In addition to the kit, it is also possible to change the body color, however, this action will need to confirm documented in the traffic police. There is nothing terrible in this. Some stop their choice on matte. In this case, it should be remembered that such complexity will arise as the impossibility of polishing.
Most often the optics owners of vases are tuning with banal tinting, however, it is not entirely legal and practical way. But competent tuning of optics makes it difficult for the fact that most alternative options Very poor quality or at a very high price. Therefore, with tuning optics will have to completely bother yourself.
Also, it is necessary to keep in mind that the tunned optics makes relatively quickly. Any person who is somehow engaged in tuning will tell you that even an unsuccessful design can brighten the uniqueness of the part. I would also like to say that if you still decide to experiment with tuning optics, then do it only on the back.
Tuning engine "Nine" with their own hands
Any professional will tell you that if you want to take a tuning of the engine, then it is first necessary to take care of the brake system and subsequently about the transmission. If in these aspects everything is ready then you can proceed to such a process as the engine tuning VAZ 2109. Tuning nine in the area power aggregate Compare with the tuning of the Eight Engine.
The volume can be "scolding" to 1.7 liters., Of course, if not put upwards. However, if you want a more vulnerable engine, you will need to take care of cooling. Next, consider one of the options for the enhancements of the engine "Nine".
First of the results: an increase in power up to 98 hp, maximum speed up to 180 km / h The process was used: lightweight crankshaft, connecting rods, valves and piston fingers, as well as forged pistons covered with disulfide molybdenum. Lada Kalina was useful, from which the head of the cylinder block was taken.
A new camshaft was also installed by 11.2 mm., As a result, the release and intake canvas came. New engine supports (reinforced) - just in case, but the rear led to strong vibration in the cabin. The January 7.2 controller controller controlled the engine.
The first and most important is described by the saying "I pay twice", everything is clear here. Serious engine tuning reduces its service life - this is unfortunately not refuted. Therefore, in order not to lose money, time and strength, and also not to gain additional problems. Think twice - whether you need it.
At the moment, the complex tuning of the VAZ 2109 is hardly the only option to highlight its VAZ of the total mass of the rest, creating something special from it. There are 3 ways:
- service certified service;
- your strength;
- combining both options (the most common case).
Different moments are addressed during the work. Tuning 2109 concerns the following areas:
- appearance;
- release;
- suspension;
- salon.
It should be borne in mind that many components, especially in the field of body kit oriented on VAZ 2109, are also suitable for other models (VAZ 2199, 2108, etc.).
Appearance
Pads
The simplest option Tuning is B. independent installation lining. These include inexpensive accessories that are simply and quickly mounted. These are visor, fixed on the glasses, "fly swathers" for the hood, plastic cilia for headlights, lining on door handles (chrome), bumper tuning by integrating the shallow mesh. The cost of such elements is small and amounts to about 1,000 rubles. or less.
Discs and tires
Installation of trendy alloy discs is the most common option. Chromed, painted or nickel-plated discs are placed on the VAZ, and the diameter, as a rule, varies from 14 to 17 inches. Big discs are combined with low profile rubber. It allocates VAZ 2109, but affects comfort - riding becomes hard.
Optics
Changes in head optics are usually made independently. The owners dismantle the headlights, disassemble them, after which they paint the surface inside into black. Almost always, xenon is integrated into the headlights, which is often complemented by setting the lenses. But there is I. ready options: Linzted headlights in the style of "BMW 5 tone chrome" (8 000 rubles), chrome (7,000 rubles) and others.
Rear lights Can be purchased. Usually, regular feet are changing to new with a different design and a shade of glass - red or smoky (about 1,300 rubles. Couple).
Aerodynamic collaps
Body installation immediately makes stock vase 2109 stylish and aggressive. But the purchase of the kit is not always justified and requires considerable one-time financial injections. You can buy a set in the car market, and in the online store.
The cost varies, and significantly. Kits: Miller 2 (7,000 rubles), "Miller Pilot" (11,300 rubles), "Miller Style" (5 500 rubles), "Zestline" (9,000 rubles), "Sniper Classic" ( 15 500 rub.), "AVR" (14 500 rub.), "Carlot" (10,400 rubles), "Tarantul" (13 100 rubles), "Ruzanov" (19,000 rubles), "Solo DM" (18 500 rubles) and others.
However, you can purchase elements separately. It is more expensive, but there is an opportunity to combine various styles, as well as buy details gradually, which is easier from the financial side. Examples: Miller's thresholds (1 750 rub.), AVR (1 700 rubles), Lex (1 100 rub.), Front bumpers I robot (4 100 rubles), Fan Sports (3 600 rub.), Lex (3 300 rubles.), Rear bumper Miller (3,500 rubles), etc.
Body details
They are also often changed. For example, set new hoods from carbon fiber or fiberglass, equipped with air intakes (AVR type hood for 6,000 rubles, like a robot for 6,500 rubles. Etc.).
Lambodvers are also not uncommon, for which special canopies are bought. But such doors are extremely impractical (curves of gaps, air siphons, etc.).
Aerography
She meets not so often. Nevertheless, a qualified artist can turn the "nine" into a real exclusive. But this requires a competent master who owns the corporate equipment, since when using budgetary paintopults, even a high-quality drawing is often blurred.
About tuning "Six" - one of the most popular models from a number of old vases - with colorful photos can be found. With the results of the test drive, Lada Vesta - a new model of the VAZ - can be found.
Engine
Without finalizing the power unit, tuning VAZ 2109 is strongly unthinkable. IN this case It is recommended to contact a certified service station.
Serious engine recycling involves a whole range of action. Usually the goal becomes one of the 2 results:
- Receipt of 98 liters. from. and acceleration up to 183 km / h;
- Sports option.
Receipt of 98 liters. from. and acceleration up to 183 km / h
For this, the following details are set:
- lightweight connecting rods for 121 mm;
- lightweight type crankshaft with a piston stroke at 78 mm;
- pistons forged (diameter 82.5 mm);
- piston rings of lightweight type;
- 11.3 millimeter camshaft;
- GBC from Lada Kalina.
Sports option
In this case, lightweight components are put: flywheel, crankshaft, pistons and connecting rods. In addition, the installation of oil nozzles, a new gearbox, clutch, copper radiator, an ignition system of a contactless type, as well as a sports silencer is required.
In addition, VAZ 2109 engines are often reassigned in order to increase the volume, put upgraded generator and thermostat. In the injection system, several ways are offered:
- installing a new carburetor type Solex;
- installation of 2 carburetors;
- processing carburetor system Nutrition in the injection.
The last option is quite cost and time consuming, therefore it is not all implemented.
Chip tuning also no longer canceled. However, under the hood of the VAZ 2109 there is an atmospheric motor, from which, in principle, it is impossible to achieve a serious increase in power. But the engine is less voracious and more elastic, but only a competent tuner is.
The most radical solution is to install a turbine and an intercooler, which implies large and serious improvements.
Release
His refinement implies installation directional silencer. It is believed that such a move increases the power of the motor. It is so, but the grease of return is insignificant. Consequently, it can not be taken into account at all. The main outcome is to obtain a "roaring" car. The cost of direct flow is about 2,700 rubles. For type 4-STAR (51 mm).
Suspension
Its improvement occurs due to the installation of better components. These are various shock absorbers: type Pilenga SH-P 2708 (1 040 rubles), "Monroe" Original (1 950 rub.), Etc. The installation of supports from "Asomi" (2 100 rubles), "Saving Expert "(1,200 rubles) and others are also put by spring from the brands" ASOMI "," FOO "," KONI ", techno springs and other.
Many spilute springs springs to undress cars, although it is fraught with losses in controllability, and changes in the brake system are completely punishable by traffic rules. This, however, does not stop the owners of the VAZ 2109, which go to the purchase of perforated brake discs, put 2-piston calipers, branded brake pads etc.
Salon
Tuning with your own hands 2109 in the cabin is the most common version of independent improvements.
There is a direct dependence on the budget. Subject to its limitation, you can do the purchase of trifles: different jewelry, armrest, lining for lever PPC, pedals and pen parking brake. Neon lights In the ceiling will also look spectacular and stylish.
If you wish to do qualitative noise insulation The salon VAZ 2109 is completely disassembled, and the torpedo is often dismantled. After that, the surface is clean, dried, degreases, and then a layer of vibration insulating material is pasted, as a rule, on a rubber basis. It is glued with a layer of splen (artificial insulator) on top of it. When pattering, it is important to do everything online and do not forget to roll the material with a roller.
Melomanians go to the installation of high-quality "music", which implies the purchase of a new radio tape recorder and acoustics, and the installation of the subwoofer and the amplifier. Many agree to replace wiring.
The interior is often dragging in expensive materials in order to add chic to him. One of the most popular ways is to use Suede "Alcantara", leather or high-quality leatherette, although it is not suiced.
Outcome
Tuning this model is a fascinating occupation, which depends only on desires, fantasies and budget.
The right to be called a car enthusiast is not every owner vehicle, but only the one who is stirred about his beloved car. Beautiful tuning of the VAZ 2109 salon is one of the ways of gentle care and custody, because in this way, the individual features and their own unique design are attached to its car.
It is no secret that at VAZ 2109 Salon, whose tuning was held with her own hands, will look peculiar and according to the tastes of the owner.
Algorithm for tuning salon VAZ 2109
Trust the tuning of the car's salon can, of course, and professionals, but still, work done by your own work looks truly great and always happens to the soul.
What you need to purchase
If the work on refinement will be carried out on their own, then it is necessary to acquire the following materials:
- Vibroplast m2;
- New devices (color is selected depending on the owner's preferences);
- Automotive LEDs intended for all devices;
- Self-adhesive film;
- Fluorescent paint;
- Cartridges and socles;
- New wires;
- New, preferably from the famous and expensive manufacturer;
- Ordinary foil;
- Required tools and so on.
Dashboard and her tuning
As a rule, any tuning of the cabin begins with the instrument panel, which you need to give a delightful and stylish appearance. Of course, do not forget about the practicality of this part of the car.
Backlight
Probably, each owner of the VAZ 2109 dreamed of having in his car the same backlight as on imported models.
Note. It is from the backlight, to a greater extent, the appearance of the car's salon depends.
Let's proceed:
- Remove the staff, disassemble it.
- We dismantle the arrows of the appliances, as well as the old overlay.
Note. In order for the backlight to get better on the lining, it is recommended to make alone cutouts from the inside. They are easy to produce with a heated knife or soldering iron.
- Take the LED ribbon.
- We cut it into pieces of three diodes.
- With the help of a conventional foil attaches uniformity of the glow.
- We take three slices of LED tape for a tachometer and speedometer, and for the temperature pointers and the fuel level is enough one piece.
Note. The factory highlighting of the car will be saved, because it will be assigned the shooter function on the instrument scale.
If it is not very not very, it is possible to upgrade it and, by gluing the LED light bulbs. It also does not hurt them slightly toned so that it is not too bright.
- All the necessary contacts are connected to the contacts on the factory backlight lamp plate.
- Determine before connecting contacts, their polarity.
- To stabilize the current and the power of the LEDs, the best way to apply the driver.
- We apply a current by 12 volts and check how everything works.
- If all is well, we spend the calibration of the arrows.
Panel refinement
The instrument panel can be made much brighter and more original if we change and modify it.
Started:
- We purchase beautiful numbers, ordinary light bulbs with cartridges, paint, ultraviolet lamp and scales panel.
- In the process of removing the panel, do not forget about the black plastic, which is around the glasses.
- Standard insert for arrows disassemble and make holes much wider than done in the regular.
- We take a fee with light bulbs.
- Instead of ordinary insert neon light bulbs.
- Top insert to protect plastics.
- Screw the lights light bulbs, spending them in parallel to the neon lamp.
- We deploy the wiring from the inside, before doing the holes.
- The arrows stain with a special fluorescent paint twice.
- Install the arrows in your place.
- We check everything and if there are no problems, we collect in the reverse order.
Noise insulation and sheathing
After tuning was held dashboard, it's time to start.
So:
- We dismantle all the elements of the cabin and regular trim.
- The vibroplast sheets are accumulating all the necessary surfaces (how to carry out high-quality noise insulation is described in detail in the article "VAZ 2109 Salon Noise Isolation").
Note. It usually takes about 14 pieces of insulating material with dimensions of 0.6 x 0.9 meters.
- After conducting noise insulation, we are silent.
- First of all, we change the skin on the ceiling (professionals are advised to sneak it twice, making the interval in 5 minutes).
Note. When carrying out the cabin cladding, it is mandatory to take into account the color gamut and do not forget to puncture the doors, a torpedo, a platform next to the checkpoint and other parts of the car.
Steering wheel and his tuning
All experts and professional professionals believe that the most secure is the regular vehicle steering wheel. It is he who is designed by the manufacturer's plant and that wheel was the necessary tests in line with the design of the car.
In extreme cases, it is recommended to change the steering wheel on the wheel from the same manufacturer, a newer model. In particular, for VAZ 2109, convenient and "grasp" steered from VAZ 2115, etc.
On the other hand, if the owner wants more, then in the market you can always purchase any "Barank", both from the famous manufacturer and steering wheel of handicraft production.
Though, as it was said above, optimal option The installation of a regular steering wheel with a braid, which we will also be examined carefully. It should not say that such a steering wheel looks great, and in the hands it keeps very convenient, thanks to the increased thickness of the rim.
Braid
The leather steering wheel looks always amazing. It is always pleasant to the touch, looks presentable and expensive.
In addition, the skin so to speak "breathes", which affects comfort while holding the steering wheel with long trips.
We begin to braid the helm of the skin on your own (this procedure at the masters is very expensive):
- To begin with, we turn the steering wheel steering wheel to make stencil.
- We wind on top of the film paper or better malarious tape.
- Draw a marker on the scotch of the seams.
- Sut the scotch on the markup, making it very carefully.
- Remove stencils that are three.
- Cut the pattern from paper.
- In the leather blank in places where the seams are provided, add 5 mm (along the perimeter of the rim, on the contrary, we remove 2 mm).
- We sew the skin, leaving the minimum margin of the neck of the thread, and cut off the rest.
- We pass the seam around the perimeter of the resulting workpiece.
Note. Sew the best synthetic threads that provide strength and due quality.
- Leather blank apply to the steering wheel.
Note. To reduce the effect of performing seams on the front side, you can cut the grooves on the steering wheel under them.
- Take a thread like a lace in a boot using a needle.
- We skip threads for seam loop on different sides of the braid.
Note. The glue is not applied at all, since the strut braid is fixed so securely.
- Fix at the end of the procedure thread.
- All removed parts and elements put in place.
Rule replacement
If the steering wheel changes to a new one, then the work process will look like this.
Started:
- Disconnect the minus terminal from the battery.
- Take out the key from the ignition lock.
- The steering wheel turns until the moment when the retaining locking lock is shown.
- We apply the appropriate tags on the steering wheel and the instrument panels.
- We take a screwdriver and use the lining of the lid of the beep.
- Then remove it.
- We turn around two screws, remove the cover (act as a curly screwdriver).
- Now you need to arm a head to 24 and unscrew the nut that fixes the steering wheel (we turn off the nut completely, but for several turns).
- The steering wheel is tightened by the shaft slots.
Note. At this stage of the work there may be a problem with removal. In this case, an assistant will help, which will apply light blows with a hammer over the steering wheel, necessarily through a special paint.
- Turn off the nut and remove the steering wheel.
- Tags from the old steering wheel transfer to the new one.
- Install a new steering wheel.
The above instruction is a light tuning of the salon VAZ 2109. There is also a more complete, where the rug is subjected to modernization, the knob, the knob, the nozzles on the pedals, buttons, etc.
In the process of work, it is necessary to use video and photos - materials. The price of the components of the tuning is not large and modernization will cost inexpensively.
Car VAZ 2109 is often susceptible to tuning. The reason is concluded in the low price of the car and the availability of a number of flaws that drivers are trying to eliminate by improving the appearance and technical characteristics cars.
Before performing tuning VAZ 2109, you can design a virtual layout with your own hands. finished car. To do this, there are sites that allow online nine. The principle of operation of such a site is quite simple:
- After loading the page on the PC or tablet monitor appears list car models (Here there is both foreign cars and auto domestic production).
- After the choice of VAZ 2109, "nine" appears, made in standard design.
- Using the selection of the appropriate parts, the user has the ability to virtually "install" parts of tuning on the machine and at the end of work to evaluate the result.
The result 3D tuning can be saved for further editing or viewing. But this will require registration on the site.
Presented on the site are made according to the similarity of those that can be purchased in automotive spare parts stores.
Discs and tires
One of the common types of modernization of VAZ 2109 - replacement of standard wheel disks. Stamped, which are standardly installed on the car, have an outdated design, take the car. However, their advantage is held in high strength.
As a result of refinement, alloy wheels are installed. They have a presentable design, light weight, and the presence of additional holes between the disk knitting facilitates more effective cooling Brakes of the car. The disadvantages of this type of tuning VAZ 2109 include high cost of discs and their smaller strength compared to stamped.
In diameter, disks usually select 15-16-inch options. In some cases, it is possible to celebrate the wheels with a diameter of 17 inches. However, such wheels are low-profile rubber.
The installation of large-diameter wheeled disks (from 18 inches) implies the existence on the car collaps - extended and elongated to the height of the wheeled arches. Otherwise, large wheels on the VAZ 2109 will be in motion to contact the wheel with a wheeled arch, and the dirt from under the wheels will fall on the car body.
Optics
Installing new headlights - one of the types of beautiful tuning VAZ 2109. Standard front lighting machines are changed to xenon or halogen lanterns, change reflectors. On the front bumper Or directly to the headlight itself, LED running lights and new dimensions ("Angel Eyes") are mounted.
The rear optics also undergo changes. Instead of light bulbs, set bright LEDs. They not only improve the appearance of the machine, but also make it more noticeable in poor visibility.
Before making changes to the design of the optics of the car, the alterations must be coordinated with the traffic police. Otherwise, ride on such a car will be prohibited.
Body
VAZ 2109 bubble tuning is concluded in the installation of sports bumpers on the machine, installation of plastic parts, improving the aerodynamic properties of the VAZ 2109 by installing spoilers and the corresponding linings.
Ready kits of bubbles and bumpers can be found in auto parts stores, however, some drivers design new body details Auto yourself. For this use harvested forms and fiberglass. Doors and lids of the trunk and the hood can vary on carbon or carbonate: more durable and lungs.
Additional air collectors are installed on the tuning nine on the roof and the hood, the windows and the windows of the rear headlights are toned. Often you can find cars painted in bright non-standard colors or decorated with airbrushing.
When creating airbrushing should not be saved on materials and tools. Drawings made using low-cost paintopults (and when using cheap paints), quickly lose saturation, and can be washed after several car miles.
In addition, the improvement of the appearance of the VAZ 2109 implies the salable of doors, the hood, trunk, bumpers film "under carbon".
Tuning VAZ 2109 implies the equipment of the car "Lambodores" (they climb up), and wheel disks and the bottom of the car is highlighted lED ribbonsimitating neon light.
Salon
Tuning tuning on VAZ 21099 concerns and alterations of the cabin. First of all, change the regular noise insulation, the upholstery, seats and the instrument panel.
To improve the noise insulation properties, the interior is released, dismantle the skin and with the help of a special adhesive composition the noise-canceling materials are fixed, the joints of the joints are processed by the corresponding liquid solutions. The new insanity of the cabin gets better materials, and regular seats are changing on the removed from foreign cars.
Improvement of the dashboard lies in the installation of the multimedia center (integrated into the car torpedo tablet computer), installation on-board computer, navigator. The instrument panel and the steering wheel installed on the tuning VAZ 2109 can also be removed from another model.
Chassis
Improvement of the chassis of the car implies tuning suspension, refinement brake system. Also, changes are subjected to transmission and the VAZ 2109 engine.
Engine
The engine tuning is directed to an increase in power of the power unit. The processing of the motor is improved in improving the head of the cylinder block, replacing the pistons, as well as the installation of the turbine. When performing these alterations, the driver will need to fully disassemble the vehicle motor.
Changes in the engine design give the machine additional power. However, so that the car can be operated, all completed modifications must be registered in the traffic police.
When tuning a carburetor, instead of one part, two are installed and grind the inlet collector of the carburetor.
Suspension
- Details are changed to more modern. For example, by purchasing a gas-oil shock absorber of a well-known manufacturer, the driver will improve the functioning of the rear and front suspension.
- Installation of elements that attach additional suspension stiffness. It may be more rigid springs from other models.
- Installation of a pneumatic mechanism that allows you to independently adjust the clearance of the car. The process of installing such a system time consuming and costly.
After the work done with the suspension, the car will be more predicted and resistant to turns.
Transmission
Tuning on VAZ 21099 implies a change in the design of the car suspension. Drivers change the number gear ratios, focusing on your driving style, and install short-terrestrial scene. This increases the gear shift speed.
In the case of self-tuning, in case of errors, the gearbox can function unstable, which will lead to emergency situations on the road. Therefore, to improve the work of the VAZ 2109, it is recommended to contact a service center, which is equipped with appropriate equipment.
Torkemose
For tuning cars VAZ 2109, it is recommended to improve the brakes. The rear drum brakes were installed on the models produced at the Volzhsky vomit. Drivers to improve the braking properties of the machine are changed to the disk.
When replacing the brakes, the hubs change. For example, when installing disk brakes on a car, wheel hubs from VAZ 2112 are mounted.
VAZ 2109 - Soviet and Russian a carenjoyable popular in Russia and CIS countries. The model has low priceWhat makes tuning available. Improvement challenges Nine and its appearance makes it possible to get a comfortable, beautiful and stylish car for relatively small money.
