* when using spare parts and supplies The customer and the implementation of single works of less than one norm-hours applies the rule "minimum order for work".
Prices for other types of work are calculated according to the standards recommended by the "Mitchell" catalog.
Prices are in rubles.
Attention!
Cars released before the 1997 issue inclusive are serviced only after a predetermined prepayment.
Diagnostic and maintenance work on cars, issued until 1997 output inclusive, is paid at actually spent time.
Warranty Obligations "Vita-Motors"
"Vita Motors" values \u200b\u200bits customers and therefore carries 100% responsibility for all work performed and parts purchased and established in our service. When contacting us on a warranty case, you need to prevent a copy of the order. In the eventual time there is no possibility to come to eliminate the defect, and by the time you visited the warranty period can expire - you just need to immediately inform us about the problem to fix the moment of treatment, and of course, depending on the malfunction to try not to exploit the car In order not to aggravate the consequences. For example, it was found to flow oil under the car after the night parking, and the client flies on a business trip or on vacation, well, etc.
Attention! "Vita Motors" does not pay works performed in other services, even if the warranty occurred far away - we better pay for evacuation faulty carBut be sure that this is our fault. Please consider this issue, unfortunately the cases of fraud on the part of not decent customers.
You changed me something and that, I have broken everything, it was far to you and I repaired there, I ask to return the money and / or pay the repair.
Unfortunately, as the notorious Muller said: it is impossible to believe anyone .... I can (c)
This, naturally, does not apply to our old customers or, provided that the service has fixed the defect for a long time and is well known. The main thing is to remember - all problems are solved. Good luck on the roads!
Send price list to e-mail
Services
from 8000 rubles
aster Vita-Motors will descend, make and mounted any hinged equipment For your SUV:
- Power bumpers (including under the winch)
- Power thresholds of any design and attachment
- Brackets for a spare wheel (including moving structures, locked)
- Expedition trunk for any burden including With fastening on the power frame of the car.
- Power arcs, headlight brackets, LED beams, and so on.
- "Keangsatniki", or how many of them like to call many - "Oloosotniki" (we do not have a kangaroo, and the donkeys are full).
- Protection of bumpers and thresholds.
And much more, both in your sketches and on the finished catalog of work, depending on the wishes and field of application. It is possible to manufacture replicas of power bumpers and other accessories
famous brands, such as ARB or JAOS.
The term of manufacture on average takes about ten days. Painting ready-made details - to choose from:
- Powder paint
- Sustainable coating U-Pol Raptor
- Sustainable premium coating Line-X.
- Automotive enamel. Colors any, at your discretion.
Cost of manufacture power supply:
- Power thresholds (no editing) - from 18000r.
- Power bumper (without mounting and platform under the winch) - From 30000r.
- Power bumper (without mounting with a playground under the winch) - From 40000r.
- Expedition trunk (without installation) - from 12000r.
- Bracket for a spare wheel (stationary, without installation) - From 8000r.
- Bracket spare wheel (swivel / folding, without installation) - from 14000r.
On the presented photo, the process of manufacturing a power bumper from a 4-mm steel sheet with a hidden platform for WARN winch, with a LED beam CREE, fogy Farams and strength tubular thresholds on Jeep Wrangler. JK, as well as power thresholds with platforms on Dodge Ram.
On everything made by the masters "Vita-Motors", equipment, including painting, is given a full-fledged warranty, to install equipment lifelong equipment!
Installation made in the "Vita Motors" of power bodies is carried out taking into account the design of a particular car, due to the use of equipment you will not worry about the power frame of the car - the load on the elements is calculated individually.
Production of power supply for Jeep Wrangler JK
Print Auto service offers motorists a unique service - the manufacture of external tuning, an unusual form of bumpers, spoilers, thresholds.
Here are some of our work:
Radiator car grilles: the tuning of their stainless steel also enters the terms of the possibilities and interests of our company. Believe me, our artistic preferences and knowledge of the features of the technology of working with stainless steel will give their results that you will be satisfied!
You can create your own style and stand out in the crowd, become more noticeable in the evening stream of cars. You will enhance the level of safety on the road, due to the fact that they will become much brighter and more visible both in the lights of the night city and with a bright sun. All products in our store covers quality guarantee. Thanks affordable prices and long service life that possess lED ribbonsThe costs are very quickly justified.
Any aerodynamic kit requires refinement and high-quality installation. Not brought to mind, it has huge gaps and cracks, an uneven surface and other defects. You can bring us your aerodynamic kit for professional installation or we will produce any desired body kit under the order.
The cost of the installation depends on the quality of the aerodynamic kit, type of body kit and is determined after inspection of a particular kit kit.
We offer a wide range of illumination elements, such as interior lighting, sets lED lamps In the regular celers of the car, designed specifically for a particular machine. The highlighting of the car is universal sets of two-level and two-color lights of the floor space into two / four points, the backlight of the door intra-alone handles, a change in the backlight and design of instrument scales, tuning devices, neon lights Blocks and buttons, installation of additional ceiling and much more!
The main focus is the manufacture of both replicas of collaps and individual projects. Fiberglass, Duraflex, composite materials - There is a huge number of titles. But the essence is one - the products created by the matrix by the use of resin, fiberglass and heaps of various additives. It is the opinion that such products are fragile, short-lived, frost-resistant. NOT. It may be so if you order a body kit from China or garage production - where the total savings in all during production goes. All products that we offer are made only with the use of expensive and time-tested components from leading manufacturers. It is not afraid of nor frost, nor high temperatures under the hood. The most important thing is the first color in the chamber at a temperature not higher than 35 degrees - so to speak, for quenching. The main advantage of fiberglass is its maintainability. In case of small damage, or even disorders of geometry with the missing elements - it is easy to restore it. But due to the peculiarities of production, such products will almost always require fitting when installed on a car. From small to global, depending on the quality of the matrix.
ABS plastic or fiberglass - what to choose.
We have already told fiberglass features. Let's now consider an alternative material in the production of aerodynamic bodies - ABS plastic - pressure casting method. Externally and according to the properties, these products are similar to the original plastic. The same elastic, light, not requiring fittings during installation (if not China, again). But in absolutely any cases, such products go an order of magnitude higher in the price, due to the entire production costs. Also, in case of damage, the product is quite difficult to restore, it loses its structure.
We bring to your attention a service - production of individual kit to order, Elements of the exterior and interior of a car from fiberglass. We offer the manufacture of an aerodynamic body parts from decorative, improving appearance car, to clean technical appointmentMaximum improvement specifications. Also, we can combine decorative and technical solutions When making body parts or parts, thereby obtaining a beautiful appearance and improvement of aerodynamic parameters.
In our studio there is a rich experience gained, due to the manufacture of to order a wide variety of fiberglass parts and details, allowing you to change the appearance of the car from insignificant, adding several new lines to the bumper gives more stylish or replacing the bumper overlap, to the cardinal change of the body appearance, who will not immediately recognize the specialists. Production of body kit on an individual project allows you to achieve maximum conformity of the final product by customer requirements, constructive features And the nuances of the car, which gives an excellent appearance, the lack of gaps and non-coordinates of the details.
The main ideal of the KV Custom, in the manufacture of body kit is beauty, and beauty is born from stylish and high quality.
We work with a number of designers who will create an exclusive and stylish design project for your car: from giving greater sportiness before creating the appearance of the concept car. We will also seem to work with your sketches or photos of the desired body kit and embody them as accurately as possible.
When designing and manufacturing an aerodynamic kit to order, all the aerodynamic properties of the car are taken into account and all the options for improving aerodynamics are calculated, which ultimately improves the characteristics of the resistance of the car on the road.
In the manufacture of body kit, at the stage of layout of parts, we take into account all the features of the car and integrate new items for a better visual response. All lines are carefully displayed and joints are set. At this stage you can see the future appearance of your car. At the same stage, aerodynamics are checked and the design is adjusted if necessary.
At the design stage, in the manufacture of a body kit, all technologies are taken into account, all technologies make it possible to make an ideal item that will exceed in place.
KV Custom has professional masters, modern equipment, high-quality raw materials and highly efficient unique technologies thanks to which we have achieved high quality products. We can ask any strength or achieve a small weight detail, which allows you to make a body kit under your lifestyle.
In case you have broken a kit in the accident, we will perform its primary appearance.
Cars coming from the gate Tuning Atelier KV Custom are always samples of quality and style, and proudly participate in various exhibitions and photo sessions.
Also you can order
Each person wants to express his personality. Someone buys clothes, jewelry or collecting brands, and motorists in every way modernize cars. In such a case, tuning is the most common way to transform the car. Notice the new engine can be a small number of people, but the renewed housing is striking immediately.
Order a bumper or other detail in the store is quite expensive pleasure, so it makes sense to make a body kit on your own hands. Having a minimum set of knowledge you can get a lot of advantages, including:
- Significant savings money compared with custom body kit
- Ability to create a unique body kit for the machine
- Work is done independently, and therefore, with due effort will be performed on conscience
- Gaining actual useful skills
How to make tuning salon tell in this article. About 3D virtual tuning - .
Preparatory stage
Before making a body kit, it is necessary to dismantle the old one. Depending on the car body kit can be attached differently. For example, the "Japanese" they are glued to double-sided adhesion and self-tapping screws. By revealing all the bolts, it is required to remove the scotch residues. There is an option when the pistons are used as an attachment.
With used car, it may be a little more difficult, since the previous owner maybe, too, was an amateur experimenting and secured sealant. In order to get rid of his traces will have to take advantage of the professional polishing of the body.
Regardless of the fastening technology, it is recommended to use a garage with a pamph or jack. After disconnecting parts, in the place where body kit was located, corrosion can be found. Remove it using a grinding device.
Production of kit
In order to understand how to make barking on the car you need to decide from what you will make it. The best material for the price / quality ratio is consideredpolyopolistrol. Before applying it should be carefully smoking the scope of applicationpolystyrene foam.
Having finished preparatory work, Cut it with cubes and stick there, where the new body kit will be bunned. Sizes of pieces depend on body size. Do not forget to pre-process the surface that will lay down to the machine. Glue pieces withmacroflex . It is necessary to apply it with a thin layer. We advise you to cut Cubianspolystyrene foam with a margin. The design itself is glued different ways, among which:
- High-quality bilateral scotch. Otherwise, body kit on the car will disappear after meeting with puddles
- Sealant, but if you want to remove the kit again it can damage the paint
The result obtained is the foundation. The following action is givingpolystyolistrol desired form. For this stage, you will need an electron, as well as a large skin. When working, it is advisable to pay attention to the following tips:
- Glue the sliced \u200b\u200bblocks only by car
- Your task to give piecespolystyrene foam Body shape machine. It is done to ensure a dense fitting of the material to the car body. Such a solution will reduce the number of cracks and further problems at the following steps.
- It is recommended to lay out blocks as if brick laying occurs. Lay out their block behind the block and scrupulously customize to the required form. Of course, you will spend it somewhere half an hour, but in the future you will realize that time was spent not in vain
- Do not forget about minimal security measures
After work S. expanded polystyrene There is a lot of dirt, so there is a possibility that the material can get into the air duct of the car. Do not forget to spend it.
If you want to make a smooth bumper skirt, dismantle it and put it on the table. Thus, work will move faster and better.
Shaping
Pressing the body shape is carried out by large emery paper of 40 millimeters. Waking it on a stick, you will get an excellent file. Electric knife is good tool To give a coarse contour. Use Socipte to give a rough form. Having reached the limit to the half of the millimeter to the desired result, go to 80-millimeter sandpaper.
Regardless of which part of the body, you do, you need to make a maximum of effort to achieve complete symmetry. Before moving K. next step Carefully check that all parts of the body part lighten to the body. this work It is the most difficult in the question of how to make a body kit with your own hands. Use 40 millimeter empty paper to adjust.
Coating
Cover the resulting body kit with a single layer of epoxy resin with fiberglass, which must be cut into small pieces. First, apply a resin, and after it fiberglass. Clean all body kit. In some places flowing droplets of resin are formed. It is recommended to remove them after frozen resin. At this stage, it will not be superfluous to adhere to several tips:
- Follow the pieces of fiberglass
- To obtain a normal density, put fiberglass adhesive
- Little pieces of fiberglass easier to glue
The durable layer is achieved by pressing fiberglass moistened in the resin tassel. Cut it from the middle to the edges until the material is completely intided by the resin. Avoid the formation of air bubbles.
After drying, begin to apply a coarse powder layer. Main problem At this stage will apply a smooth layer. This process is necessary to remove all irregularities and flaws. After that, go throughsandpaper to be removed problem places. For getting best result We have to repeat the procedure several times. Small recesses remove putty.
When everything is dry, carefully look at the design. Make sure that the symmetry is observed and feel free to go to the next step how to make a body kit with your own hands. Now you need:
- Remove the resulting element from the bumper
- Out off the original skirts and wipe them well
- Make a skirt contour pattern in contact with fiberglass bumper. Apply multiple layers of fiberglass so that the template is durable
- Carefully drop off the bumper
- Clean the resulting item frompolystyrene foam. Do it gradually, because the layout loses stiffness, so we treat it with fiberglass, and then apply the resin layer
- Disconnect the side skirt templates to get the base for fasteners
- Make a few subsidements on the mounting bar to then connect it to the skirt. Similar feeds are made on the skirt
Fastening details
Take the workpiece made by the template from the factory fastening of the bumper. Attach it to the skirt using fiberglass and resin. As soon as the design freezes, secure the skirt to regular places using the factory bolts.
The likelihood of the fact that the item will smell badly. Cracks and discrepancies can be observed, but this problem is solved.
In this case, the malarious tape and the elastic putty will help you, which should be applied along the line of contact of the skirt and bumper. We are waiting for the pouring of the material. After that dismantle the skirt. It will be clearly visible in the influx. Carefully remove them.
Now you should increase the influx at the bottom of the skirt located on the wheel side. To do this, take a piece of cardboard. Cut the desired pattern and proof by scotch. In order for the cardboard does not lose form strengthen it with twostrapikov . To complete the work on the body kit on the car, several steps remained:
- Apply several layers of fiberglass resin to impart stiffness
- After resin, we proceed the part with a putty and align the surface with a skin
- Most likely, you have to apply several layers of putty to obtain smooth surface
- Try an element on the machine
When you make the whole front of the work, you need to pay attention to one item. When turning the wheels of the car, the Watch will be viewed the gap in the skirt, so protective corners are required, which are made using elastic putty, cardboard and painting tape by analogy with the rigid edge. Now you know how to make bodies on the car.
