Plexiglas - material that secured his position both in everyday life and in production. Its technical characteristics (strength, transparency, thermoplasticity) are not inferior to the properties of ordinary glass. Operation of organic glass can lead to the need to polish it. Is it possible to polish the material at home and how? What is included in the process of preparing and processing? Everything is not as difficult as it may seem at first glance.
Features of the material and scope of the application
Organic glass is obtained from acrylic acid due to the implementation of various chemical reactions. This material is similar in various parameters with conventional glass, but the nature of it is organic (hence the material name). There are several words synonyms - plexiglass, akriplast, carboards, etc.
Among the main characteristics of the plexiglass, you can especially allocate:
- ease;
- softness;
- the ability to easily transform;
- compliance with processing;
- high bandwidth;
- when exposed to certain chemicals, plexiglas decompose.
Impact resistance of many types of plexiglas 5 times more than the usual
Polymer transparent material is used in various areas of human vital activity, so the operation of organic glass can lead to a change in its appearance - the deterioration of transparency, decrease in the gloss, the appearance of scratches, roughness and other adverse moments. The carb-stoles for large glass damage turns into a regular plastic. In this regard, the question of the need to polish the plexiglas at home is often faced.
Methods of polishing plexiglas at home
Protective view can be given the facilities from the plaquius, without resorting to the help of complex tools or expensive materials.
There are several effective methods of combating "non-unique" type of plexiglas:
- Felt + paste gay.
- Application of dichloroethane.
- Using polyrolles.
- Home recipes (wine vinegar, toothpaste, etc.)
Using Goe Paste, Stuffs and Felt (with detailed video)
It should be known that they distinguish rough, medium and slim types of gay paste
Algorithm:
- Plaquia isolation from other structures and elements. If it is possible - separate the plexiglas from other designs (cure adjacent sections with a tape, disconnect the parts from the plexiglass, etc.)
- With the help of sandwich with grain in 2000, treat organic glass, periodically wasting the surface with water (under jets or with a sprayer). Uniformity and slowness - the main characteristics when performing this work. Matte homogeneous surface should be the result of this time-consuming stage.
- The detail is polished with a douse, taking advantage of felt with the paste of GOI applied on it. Doing it needs slowly, achieving the highest possible result.
This method of restoration of the plexigrass is suitable for plexiglas in the presence of large scratches on it.
Following step-by-step instructions of the video material, you can easily cope with the task of eliminating the defects of the plexiglass.
Homemade helpers (toothpaste, chalk and other) + video
As a polishing agent, some craftsmen use chalk or toothpaste, inflicting these substances on a felt or other soft tissue. How to polish - manually or with the help of equipment - solves each specialist independently. The main thing is to obtain a result in the form of a smooth and shiny surface.
You can use conventional towels from natural materials. Apply on them a little paste for cleaning the teeth and rub it in a circle into the treated surface. After that, rinse the plexiglass with simple water.
Below is a video demonstrating a method of polishing automotive headlights with a toothpaste.
Is it possible to polish with your own hands using dichloroetan
The use of this substance is appropriate when processing small plexiglass areas. Dichloroethane dissolves the upper layer of the plexiglass, thereby improving its appearance, leveling the surface and eliminating scratches. Chemical substance with a spray gun is applied to an actuator and are waiting for complete drying.
But the use of such a method requires a good skill in work, since, when removing scratches, you can add irregularities of glass, and chemicals are not for the wizard changing the plexiglass appearance.
Other scratch
To give a smooth and brilliant type, the product can be processed by any car polishing agents.
- The action of auto-polyarols is preferably tested, trying to process first a small area so as not to spoil the entire product.
- If the result is satisfactory, then we boldly begin to work. To do this, apply autocossetics on a soft cloth and wipe the product with circular motions many times.
You can speed up the process using power tools - polishing circle, grinding machines. Applying such devices, do not forget that the rotational speed should not be too high so as not to "burn" the surface.
Good reviews in terms of polishing carborage received the Japanese compound paste.
Included and special polishing bar
The choice of chemicals for cleansing glass is a very important process, since some chemicals instead of use can cause severe surface damage, simply destroying it. Therefore, with great attention to the use of such funds.
Any action regarding the improvement of the appearance of acrylic glass will be in vain, if it harms your health. Therefore, when working it is necessary to remember the safety technique:
- When working with a sandpaper or grinding machine, put on the protective glasses so that possible dust particles do not get into the eyes.
- Do not neglect the use of gloves, they are mandatory for safe operation (when the surface is sledging, when using chemicals). Pick them in the size of the hand to avoid snugging the fabric in a polishing circle.
- Using chemical funds, do not forget about the receipt of fresh air to the room in which the work is carried out.
- Working with special devices, be sure to check their condition and reliability of electrical wiring and sockets.
- When spraying dichloroethane, use the respirator or medical individual mask.
The process of polishing the plexiglass at home is time consuming and long-term, especially if you work manually. But the result will definitely repay you for the works. The surface of the plexiglass will become smooth, smooth, without jar and scratches and will rejoice you for a long time.
What if the plastic molding or other detail of Oldtimer, made of plastic, lost the appearance, the color or hanged and began to collapse and began to collapse? Despite the strength of the ABS plastic, it is strongly susceptible to the negative impact of the external environment.
Plastic elements in the cabin and exterior of cars began to appear in the second half of the 20th century. For example, in the American automotive industry, the plastic era began to actively develop in the 1970s. From an economic point of view, this was a real discovery - the material was quite durable, durable, inexpensive in production. However, nothing is forever, and the time still takes his own. Under the influence of ultraviolet rays, the plastic gradually burns out in the sun, becomes bell and "worn", and in the case of the external decorative elements of the body there is another aggressor - reagents that sprinkle and watered roads during the cold season. In addition, in the process of active operation, scratches and cracks will inevitably appear.
As a rule, plastic elements of the body are made of material under the complex name of acrylonitrilbutadienstyrene, or simply ABS plastic. This is a shock resin, resistant to moisture and oil. From this, the polymer was very popular in the automotive industry and details of the interior. However, the material is poorly tolerated by ultraviolet radiation, and some types of this plastic are even destroyed under the influence of sunlight. In 1998, this led to one of the most large-scale car reviews in the history of the United States - the security belt button made from an abscess of ABS plastic unstable to ultraviolet, breaking the seat belt lock, not allowing the belt or - which is much more dangerous - to sweat it. As a result, 8,800,000 cars hit the response.
Well, if the item has kept its integrity, but it just emerged from time to time. In this case, you can do the upgrade of the upper layer. For this, a whole series of funds that restore the color of the details and extending its service life was developed. Some of them even add flexibility details, which over time is lost, thereby reducing the risk of breakage. The American publication Consumer Reports conducted his own research, studying the characteristics of the funds presented in the market. Depending on its characteristics (and, accordingly, costs) preparations provide details protection for a period of two weeks to two years. It is worth noting that Consumer Reports analysts considered only the means for plastic elements of black color, although it is not difficult to choose the necessary kolker today. The test was carried out in a sufficiently funny format: the plastic lining of the body was divided into several parts (by the number of funds participating in the test), were treated with test compositions and ... put 10 weeks to the roof of the building, in which, in fact, the editorial office of Consumer Reports. Each week, the panels were filmed, soapy, dried and sent to the roof again.
In the opinion, according to experts, the harsh test of the scoring sun and heavy rains was kept samples covered with Renu Finish and Wipe NEW - covered parts retained bright black color throughout all 70 days of test. Minus both tools are that they are sold in bottles of small volume, and at the same time it is noticeable more than analogous. Although the difference in the results of the experts was recognized as tangible. The remaining means (Turtle Wax Premium Grade, Meguiar's Ultimate Black, Mothers Back-to-Black) showed a vigorous start, but by the end of the test all the parts treated with them were fused.
The former color of the plastic can be returned to the construction hairdryer: with a neat uniform heating, the kel performs on the surface of the part. For black plastic parts, it is possible to use the ink of bumpers (for example, Hi Gear or "Astrochim"), however, judging by the reviews, the item quickly quickly loses an attractive look.
Construction hairdryer can help refresh the appearance of the detail, but, unfortunately, this is a temporary measure.
But what to do if the plastic element of your car received a serious crack, and we are not talking about molding, but about the whole body panel? In this case, welding will help, but everything is already much more complicated here, and it will be better to refer to specialists. The fact is that the ABS plastic unites the whole family of materials whose characteristics depend on the proportions of the components - acronitrile, butadiene and styrene. Depending on the proportion, each type of plastic has its own melting point, and hence the welding temperature. If during welding to choose too high temperature and steam plastic, the material will begin to foam and freeze in a porous state, which is why the welding seam will be fragile and short-lived. It is logical to assume that with insufficient temperatures, the plastic is very badly melted, and the solid seam will not work. Therefore, during welding, a special hairdryer is used, on which it is possible to manually specify the exact temperature value depending on the type of plastic.
However, if it is not required for solid strength from the part, then you can do the simplest ways, which are actually enough: for example, use the epoxy resin, to sneak the damaged section of fiberglass or reinforce the metal grid. The simplified method of recovery includes a soldering, which must be distinguished from welding. Actually, the difference is that when soldering is extremely difficult to "get" in the desired temperature, so the seam is obtained by fragile and porous. Enough in order to visually hide the defect, but the strength and durability will not provide. In any case, the first thing the part must be thoroughly rinsed using a cleansing agent intended for removing tar, salts and other mud. To do this, you can use a special cleaner of bitumen spots. Market offers Mass: AC-395, Hi Gear Buster Bug, Pingo Tar Remover, Liqui Moly Teerentferner and others. By the way, it is possible to take advantage of the grandfather's way - "White Spirit" or kerosene. Also, it will not be superfluous in the detail of the brush. For this purpose, the brush is best suited.
Finally, a very "hard case" - if the item is not subject to light recovery, and it is easier to replace it than to restore. Well, if we are talking about the mass model of the car, which is easy to find the necessary details. And what if you have a rare copy for which it is practically unrealistic to choose components? To date, in addition to fiberglass, 3D printers are gaining popularity. Over the past two years, the mass of the initiatives at the industrial and scientific level has found its application to master the three-dimensional printout technology in the automotive industry. Recently, TECHMER PM, specializing in the modification of polymers, even presented even a full copy of the legendary Shelby Cobra, fully printed on a 3D printer. So the company demonstrated that this technology may well be used when restoring old cars. True, in this case the authenticity of the car is lost, which is undesirable when working with autoclassic, and the technology itself is still developing and therefore is quite expensive pleasure. However, the increasing percentage of using three-dimensional printing in the automotive industry allows you to hope that over time this option will become more accessible.
This Shelby Cobra is fully printed on a 3D printer.
Plastic parts of the cabin are not easier: the cabin is protected from road reagents, but suffers from sun, large cargo and non-accuraant passengers, earning scratching, scratches and cracks.
However, to update the plastic parts and return them to them by the former novelty, and budget funds. If the car is already elderly and represents a certain historical value, with a competent approach, it is possible to increase its value of dollars by 500, while spending ten times less. Although, of course, it all depends on the scale of the problem.
To begin with, the surface of the plastic interior details must be cleaned. A number of American specialists, in particular, the American restorer and the leading Stacy David, advise the use of trinitium phosphate - a compound that makes up the basis of various detergents and cleaning products. The next stage of preparation for painting is to provide a sufficient clutch of the surface with the paint you are going to apply. To do this, you can use a special adhesion amplifier (Stacy David recommends Duplicolor), which will provide a reliable clutch, acting as the primary layer-primer before applying the main paint. If this is not done, the new coating will fall on the old paint and it will be bad - quite soon the item will have to be repainted again. As an additional binder agent, the first, rough layer of paint is also used. In the case of a plastic salon, a very popular tool is vinyl paint (the so-called liquid vinyl) of the type of Plasti-Kote or the same duplicolor. Which of these brands is better - the question is controversial, and the opinions of Western restorers on this issue are diverged. Paint is applied in several layers, for reliable consolidation. It is at this moment that there is a magic: the old detail turns into a new one, as from the factory, and all the years of its services are hidden under a layer of fresh paint. Final barcode - Processing Details with a special reducing agent to impart brilliance and additional protection. ARMOR ALL AND BLACK MAGIC is used in demand.
Refresh the item can be without coloring. To do this, after the washing stage, the part is dried, and then treated with sandpaper, stabbing all small irregularities. However, it is not necessary too much to be carried away - quite the "gentle" from coarse-grained, 6-H, which is usually used for the final grinding of soft wood. After that, the part gently and evenly warmed the usual hairdryer, while wiping the element with a clean rag without a special pressure. After such processing, the part is noticeably raised, but with strong failures, the homogeneous texture of the plastic will not be completely restored.
If there are also cracks on the part to the whole, you can fight with them with a simple superclay, which is applied along the entire length of the crack. For additional stiffness and durability, you can go through the same place from the inside by the adhesive gun - it will give a guarantee that the crack will not disperse. Surplus of dried glue are stitched with sandpaper.
A somewhat different things are doing with steering wheels with a plastic rim. The lacquer layer is concentrated, after which all cracks and scratches are drilled and expand so that it is easier to fill damaged by epoxy resin. Many at this stage use a standard two-component epoxy resin, but can be used, for example, a filler called Bondo - 3M production brand. He became in America for almost a nominal name, in fact - automotive grinding mastic. When the mastic is freezing to the state of the molten cheese, the author recommends processing the scene of a coarse sandpaper 25-h. The main thing is not to waste time and do not hesitate the right moment: completely hardened mastic Bondo is very problematic to grinding sandpaper.
Andrei Schuldeshov
Plastic cleaners Apply if you need to remove the dirt on the plastic elements of the car's interior. Such as a torpedo, control panel, door map, thresholds, trunk elements or other plastic parts of the auto interior. Unlike they not only suggest the gloss, but also actually purify the surface from dirt giving a fruit or natural surface view.
Therefore, car owners have a natural question associated with the choice of certain means for cleaning and polishing plastic, because on the shelves of stores such cleaners of the plastic car salon car a huge amount. There are means for cleaning, polishing, universal, capable of cleaning not only plastic, but also leather, rubber, vinyl and other surfaces. In addition, car plastic cleaners are produced in the form of sprays (both manual and balloon) and foam compositions. Which one is better to figure it out.
On the Internet you can find a large number of contradictory reviews about various plastic cleaners of the car. Also, many car owners conduct their own tests of such funds. The material contains information about the most popular cleaners and their rating is given in accordance with their characteristics and the effect of work. If you had a personal experience of using a particular plastic cleaner, we ask you to express personal considerations in the comments.
How to use a car cleaning agent
Before moving directly to the description of the best car cleaning cleaners, it makes sense to familiarize yourself with how this tool works and how to use it. Despite the variety of grades and types, their composition is approximately the same, and it includes silicone oils, fluorine-containing polymers, moisturizers, artificial wax, flavors and additional binding components.
Note! Plastic cleaners are used for infrequent use (for example, to clean the cabin one or twice a year or in case of random one-time contamination. If you regularly take care of plastic parts of the cabin, then you need poly rays for plastic, and these are some other means.
Most cleaners not only directly wash the dried pollution on the surfaces of plastic parts, but also give them shine, antistatic properties (due to which dust does not settle), as well as protect the surfaces from the effects of ultraviolet (especially relevant for the hot season with the bright sun). As a rule, cleaners are implemented in the form of aerosols or sprays.
The method of applying these funds from the most prevailing majority. For this, a contaminated surface is applied by a certain amount of purifier, after which the time will be listed during which the composition penetrates into the dirt, driving it. Next, with the help of a vein or sponge, the resulting foam with garbage is removed from the surface. If the cleaner is also a polyrolol, then in this case it is necessary to bring the surface to the brilliance with the help of the vehicle (that is, to be confused). Before using the purchased tool (and better before the purchase), carefully read the instructions for its use. It is usually applied directly to the bottle or attached by a separate sheet in the package.
Rating of the best plastic cleaners
This rating of plastic cleaners does not have a commercial foundation, and compiled on the basis of reviews and tests of motorists who performed them at different times personally. This approach gives more or less objective information about what kind of plastic cleaner car is better. However, in various stores, the assortment of funds may differ, especially since the chemical industry does not stand still, and new formulations regularly appear on the market.
Numerous positive auto owner reviews make it possible to give this tool leading position in our ranking. This tool is a classic plastic purifier with a reducing effect. Interestingly, it can be used not only for parts of the car's cabin, but also body elements, as well as in everyday life. We apply the pray cleaner moth and for use with rubber surfaces. It has an antistatic and dirt-repellent effect.
The use algorithm is standard. Before applying the bottle with a cleaner, you must shake, after which it should be applied to a contaminated surface with a sprayer and wait a bit. Next with the help of microfiber, winds or sponge remove dirt from the surface. With a strong contamination, the procedure can be repeated two or three times.
It is realized in a 500 ml bottle with a manual sprayer. Article of goods - 7600. The price of the plastic purifier as of the summer 2018 is about 1000 rubles.
Sonax
It is a classic plastic cleaner. It has several types of flavors, so it can be used as an aromatizer. It also has polishing properties, gives plastic matte species, usually black. After use, the plastic means looks beautiful, dust does not stick to it. Plastic cleaner Sonaks can also be used in everyday life. The staff does not include silicone.
The method of applying traditional. It is necessary to apply the composition on a contaminated surface, and then wait a couple of minutes, and remove the foam with a vet. In case of severe contamination, you can use the tool twice. It is enough to remove the strongest pollution.
Silends in 300 ml springs. Article - 283200. The price of such a means for the same period is about 400 rubles.
It is a cleaner not only plastic, but also vinyl and rubber. It has not only cleansing, but also restoring effect. Great for restoring yellowed plastic. Also has a dust-repellent and dirt-repellent effect. Removes unpleasant odors in the cabin, including the smell of cigarette smoke. There are no solvents.
The method of using the cleaner is traditional. It is necessary with the help of spray to apply on the surface being processed, after which it is imposed for 2-3 minutes. After that, remove the dirt with a vet. Please note that it is impossible to make funds from the eye!
Packed in a 500 ml spray with a manual sprayer. Article - AC365. The price as of summer 2018 is about 300 rubles.
It is also a universal cleaner for both plastic and rubber and vinyl surfaces. The remedy can be used in the domestic conditions. The manufacturer allows the use of the purifier and for external plastic and rubber surfaces of cars. Very good removes silicone, fat, various technical fluids, and so on. It has a dirt and dust-repellent effect.
The use of traditional. With the help of a manual sprayer, you must apply a dirty surface. After that, wait a few minutes. Please note that removing dirt is recommended using the microfiber cloth. This gives the maximum cleansing effect.
It is implemented in 500 ml bottles with a manual sprayer. Article of goods - FG6530. Price - about 400 rubles.
Lavr.
It is not just a cleaner, but air conditioning cleaner for plastic. That is, it not only effectively cleans plastic surfaces, but eliminates unpleasant odors, including the smell of tobacco smoke, instead fills the salon with fresh aroma. The cleaner can also be used with rubber surfaces. It has a protective effect, protects surfaces from the harmful effects of ultraviolet.
Used traditionally. It is necessary to apply a certain amount of substance on the contaminated surface, wait a couple of minutes, and remove the dirt with the help of the vein. Some car enthusiasts note the low efficiency of the cleaner. However, it rather depends on the degree of pollution and thoroughness of wiping the dirt. But it is appropriate to take into account someone else's experience.
Facing in two types of bottles. The first is 120 ml. Its articula - LN1454. Price - 150 rubles. The second is 310 ml. Article - LN1455. Price - 250 rubles.
Classic purifier plastic parts car interior parts. It can be used on elements of the casing, dashboard and other details. There is a high effect of its use. Together with cleaning, protective functions performs, in particular, prevents the plastic cracking under the influence of ultraviolet, has an anti-static and dirt-repellent effect.
It is a foam aerosol. After applying on the surface, a sufficiently dense foam layer is formed. The method of application is standard. The tool must be sprayed into the plastic part, wait a bit and with the help of a rubbing dirt. Please note that the tool is flavored, and in stores you will find this cleaner with various flavors (apple, mint, vanilla, orange, peach).
It is implemented in a balloon of 400 ml. Article - 5571. The price of this period is 80 rubles.
Another name of the means is the Polyrol Plastic Penal. It is a cleaner of the internal and external plastic elements of the car, as well as rubber. It has good thick foam, which is formed on the surface being processed. It has an antistatic effect, protects plastic from drying and exposure to ultraviolet. The ruler has eight flavors that this cleaner can have.
Method of using traditional. After applying the means to the surface, it is necessary to wait a few minutes so that the composition makes it well in the dirt, after which it is possible to remove the entire mixture with a vein or sponge. If necessary, the surface can be polished.
It is implemented in a chamber of 335 ml. Article of goods - KR905. Its price is about 100 rubles.
Conclusion
The auto chemical market currently presents a huge number of plastic purifiers. It also depends on the country's region. However, when choosing this or tool, pay attention not only to the ratio of price and quality, but also the functions that it performs. So, to remove dirt from plastic surfaces you need a cleanerBecause the polyrolol is used to impart the pristine surface of the surface, and is used on a regular basis unlike the cleaner. In the extreme case, you can buy a universal cleaner with a polishing effect, which on the market there is a lot of.
Daily exploitation of plastic objects inevitably leads to the appearance of defects on their surface. To eliminate scratches, chips, scuffs, other damage to the material, it is worth finding out how to polish plastic. With the help of simple and available methods, it is quite realistic to cope with the problem of own forces without referring to the specialists.
Selection of plastic polishing solutions
To select a suitable means to eliminate defects on the surface of plastic, it is worth assessing the complexity of damage. Depending on this, subsequently, it will be necessary to give preference to a particular polishing method.
Work in the following ways:
- mechanical;
- thermal;
- chemical.
If the plastic is covered with small scratches, a delicate manual polishing will help with the use of chemical abrasives. There will be special substances for polishing large and small graininess. When you have to deal with rather deep damage, it will eliminate the problem to allow the thermal effect on the material, as well as coarse mechanical grinding.
grinding around
Polishing technology This method involves the presence of a drill. A special grinding nozzle is applied here, which will not be difficult in any construction store. With it, it can be cleaned with any surfaces, not only plastic, as well as toothpastes and other things.
If you need to save a little, then a piece of felt may serve as an alternative to a special grinding nozzle. The segment of the material must be collapsed into the roller and insert a drill into the cartridge. Felt is quite effective. The only thing that is required to achieve the expected result is a reliable fixation of the material. Otherwise, felt will jump off a drill, delivering a whole mass of trouble in the process of work.
Application of toothpaste
To polish plastic, it is not necessary to spend money on the purchase of specialized chemical compositions or resort to surface treatment with an electrical tool. Eliminate the sweeping of the material and remove small scratches from its surface allows us to use a regular toothpaste as an abrasive. The use of such an affordable domestic product makes it possible to return to the products made of plastic to the former shine. As practice shows, especially effective
The polishing process involves the following:
- Surfaces are cleaned of dust and contaminants. It uses any domestic detergent that has a neutral chemical composition.
- Plastic degreases, rinsed and dried.
- Toothpaste is applied to the clean flannel cloth. Surfaces are polished with circular motions in one direction.
- The resulting Kashitz washed off. Operation is reused.
- The remnants of the toothpaste are removed with a wet sponge. The product from plastic dry wipes.
Heat treatment
How to polish plastic, the surface of which contains enough deep defects? To do this, it is necessary to undergo it with a heating with a hair dryer, which will greatly simplify the subsequent grout of damage.
For uniform stripping, large-air plastic products are processed by a hot air flow. As the material melt, the scratches will begin to be gradually tightened. It follows to work with a hairdryer, so as not to rearrange, because with excessive heating plastic can be deformed.
By resorting to this method, you should not expect a complete, rapid disappearance of defects. It is enough to perform heating, while the edges of the scratches on the plastic will not start slightly melted. Then it is necessary to immediately move to their grout using a grinding circle or manually using abrasives.
Plastic Polishing Paste
To eliminate losses, chips and scratches on the surface of the plastic, there are several types of specified means. Each of them has different graininess. Therefore, the main thing here is to choose correctly the number of substance, pushing out the nature of the existing defects.
For a rough, rough grinding, a substance is suitable with an index 4. Such a paste of the Goe, the price of which is about 200 rubles per capacity of 100 grams, will allow you to remove large damage to the material. In this case, you will have to resort to surface treatment with a mechanical method using
To eliminate the average damage, a means with an index 3. The presented paste of the Goe, the price of which is up to 180 rubles, is the ideal solution, if necessary, grouting enough textured scratches.
As for finishing polishing, it is worth using paste with an index 1 or 2. The specified means are the least abrasive and are an ideal solution for finishing surface grouts.
Polyrol processing
How to polish plastic to the perfect state? To do this, it is worth using a special polyrolol designed to work with the presented material. Apply a substance on the surface is recommended a thin, uniform layer. So that the surfaces become smooth and shiny, it is quite well to be confused by polyrolol with a segment of flannel fabric or a soft grinding nozzle. Such seemingly a minor nuance will consolidate the result, regardless of the method that was used to eliminate defects from the surface of the plastic.
It is worth noting that the polyroli does not have protection against moisture and water. Over time, they simply wash off. Therefore, if the plastic sweep is observed after a while after processing the polyrol, the surface should be wired from contamination and re-covered with substance. Such an approach will avoid the emergence of new defects and will retain the glitter of the product for a long time.
Finally
So we found out how to polish plastic with your own hands at home. As can be seen, for this you only need to use conventional undergraduate tools, as well as accessible tools that you can easily find on sale. Thanks to the combination of polishing methods and a competent approach to the task, you can return to life any plastic object that has noticeable defects on its surface.
Independent polishing of products makes it possible to save a decent amount. Restrained a bit, relying on the above methods, you can learn how to qualityly restore plastic objects not only for yourself, but also for friends and loved ones.
