Properties of transmission oil for manual gearbox. What is the transmission oil to fill in the manual transmission? Best transmission oil for VAZ 2110

The PPC VAZ 2110 includes many details and nodes constantly in motion. Their surfaces have long loads all the time. To repay the resulting friction force and save the PPC in working condition, use various transmission oils.

When choosing lubricant First of all, the features of the design of the box are taken into account. Besides, important factors Quality is considered:

• The operation time of the car.
• Temperature.
• Climate.
• Working conditions.
• Action of additives on the details of the transmission.

It is very important that the lubricant corresponds to the desired degree of viscosity. Its parameters must remain unchanged at the operating temperature of 80-120 degrees.

Professionals believe that for all modifications of VAZ 2110, synthetic products are ideal. They can be used in the most difficult conditions.

Suitable marks of transmission oil for VAZ-2110

All "dozens" are front-wheel drive. Thanks to such a design, overheating decreases, the box parts are less than a load.

1. Synthetic 75W. It has excellent lubricating properties. PPCs on such oil will work normally with a decrease in temperature.
2. Semi-synthetic 85w. Fills in the gearbox of a car that runs over 100,000 kilometers. Properties allow you to reduce the noise in the KP, make the gear shift smooth.
3. Mineral 80w. Most drivers consider this oil the best for VAZ 2110. However, it has one significant disadvantage - when the temperature is lowered to negative values, the liquid begins to thick. As a result, she loses its properties.

• Luka »TM-4;
• Nordic Supertrans.
• Lada Trans KP.
• Slavneft TM-4.
• TNK 75W.

How to properly serve the gearbox

To replace the transmission oil by the manufacturer of the VAZ 2110 is recommended after a minimum run of 60,000 kilometers. But that the box does not fail, during this period it is necessary to follow its work. Experts advise several uncomplicated operations:

Constantly check the volume of fluid. Better - to the touch. This will make it possible to determine the presence of solid particles. When they are detected, it is necessary to change the machine. This rule mainly concerns new cars when the transmission details are running and "soldered" with their surfaces.

Checking the volume of lubricant, you need to look at and on its color, and also pay attention to how it smells. If you darkened, there is a sharp nasty smellIt means that it is not capable of functioning normally in the box. Listed factors talk about low quality, perhaps about a bad fake.

Many believe that it is best to pour a synthetic liquid. However, it is always necessary to remember that the synthetics for the transmission differs in high fluidity. Therefore, when it is used, you need to monitor the condition of the glands all the time. This is especially true for cars with great mileage.

You need to buy oil only in specialized stores, where it is almost impossible to acquire a fake and guaranteed high quality products. Of course, the fake will cost much cheaper, but the box, thanks to the falsification, will quickly fail. Her overhaul It will be much more expensive.

Professionals advise in the gearbox VAZ 21110 Pour oils a little more level. This is due to the location of the gear of the fifth transmission. It is installed just above the rest of the details. If the level is lower, the onset of "oil starvation" is possible.

Any unit with rotating details requires lubricant. And in the case of the transmission box, the lubricant must also be due. What kind of oil is better to buy in the transmission of car VAZ 2109?
Light on this question sheds this instruction On the choice of oil in the PPC VAZ 2109. Carefully examine this article - here you can learn about the choice between motor and transmission oil, synthetics and semi-synthetic, as well as about choosing between various manufacturers Transmission oils.
Photos and video will help you carefully understand this difficult question. So, let's begin.

• Oil options for gearbox VAZ 2109
• 1. Motor oil
  2. Transmission oil
• Choosing a manufacturer
  1. Domestic manufacturers
  2. Foreign manufacturers
• Some oil pouring tips
• Output

Oil options for gearbox VAZ 2109

Oil in requires carefulness of choice. So what are the options - what makes it choose?
So:

• When appearance front-wheel driveThe owners tried two options. The first was the same as for the "classics", that is transmission oil TAD-17, but experience has shown that such an oil is not suitable for nine.
  And all because the main couple is in the gearbox nine ososophy, and not hypoid, as in the classics.
• The second option is the usual motor oil. Here on it and stopped at that time. This option will be considered more further.
• Now there are many other options for filling in the PPC VAZ 2109.
  1. Domestic oils
  2. Overseas oils
  3. Various Classification (GL-4, GL-5 and TM-4, TM-5)
  4. Various viscosity (SAE 80, SAE 90)
  5. Mineral, semi- and synthetic oils

Tip! As can be seen, the choice is great, and right choice, Usually, one or two. Do not hurry, and carefully study the theory before you begin to replace the oil VAZ 2109.

Oil selection for each car is different

This applies not only different marks car. Even for different cars VAZ 2109 can suit perfectly different variants transmission oil.
Let's figure out what oil, in which case it is better to apply.

Motor oil

So:

• What is good to use engine oil in transmission? The first thing that comes to mind is its price, which is in acceptable limits.
• Analyzing the reviews of the owners of 2109, you can see some features. For example, there are a number of cases when on motor oil, filled into a gearbox, a car traveled 300-400 thousand mileage mileage without the slightest claims for repairs.
• On the other hand, other cases show that the use of engine oil is undesirable, as it leads to the quick wear of the box parts, such as synchronizers or gears.
• So how do you still determine whether the engine oil is suitable for a box on the VAZ 2109? Again, analyzing the overall picture of the use of such an oil, we make a simple and very important conclusion.

Output! Motor oil can be poured only if the year of production of the car until 1993-1995. Motor oils in transmissions are extremely recommended for cars released in the later years.

Transmission oil

Such oils are a great set and consider all specific oils will not be enough time and patience. Therefore, we will consider only the categories of oils, and in some cases we give examples.
Go:

• Little to mention TAD-17 in more detail. If someone doubts that it cannot be used in VAZ 2109, read the reasons for this.

• The viscosity or density of TAD-17 oil is very high, which leads to the following problems: in the winter the car will not be treated, the anti-mailing additives (which themselves give a good effect) in oil are contained in highly large quantities.
• A large number of native additives contributes to intensive wear of synchronizers.
• The synthetic oil seemed to be better than the rest. It is better in thickness, and quality has positive, and additives are available. But there is one but!
  The use of synthetic transmission oil (in the designation GL-5 or TM-5) is welcome in sports boxes, where the quality of parts is better, and the temperature is higher, and (in some cases) there are no synchronizers.

By the way! Carefully read the instructions for transmission oil, you can determine whether it is suitable for your car or not.

• So, in the instructions for synthetic oil of the GL-5 class so directly and written: "It is used for inconspicuous mechanical transmissions."
• And one more thing is not in favor of synthetics - this is its price. The cost of such an oil is high, and practicality is not very - therefore the use synthetic oil In the gearboxes, VAZ 2109 does not make sense.
• And the last option is a semi-synthetic transmission oil. It is not suitable for use in this car.
• Designation of such an oil GL-4.

By the way! In the service book to the car, the type of oil recommended by the manufacturer is specified. This is exactly GL-4 or TM-4.

• It is better to take on a denotote with the designation 75 or 85. The composition of such an oil and its properties are optimally suitable for both gear gears and synchronizers.
• Concerning winter periodThe semi-synthetic will not freeze like mineral water, for example. In the frost -25 degrees, the car will start as in the summer.

Choosing a manufacturer

Brief characteristics we have already been listed, and now you can also delve into the choice of oil producer for Samara gearbox. So, who does the best on the VAZ 2109?

Domestic manufacturers

So:

• The plant declared by the plant for the checkpoint is TM-4-12. Ideally, you need to use, of course, it. This oil was specifically designed for the PPC of this particular car.
• Turning on logic, we come to the conclusion that it was specially designed, it should be the best. The manufacturer may be different - for example, Rexol.
• For example, M6Z12G1 engine oil used in the PPC VAZ 2109, does not reach the TM indicators slightly.
• LUKOIL SAE 15W-40 is also a good competitor, specially designed by oil, TM-4-12. The backlog of it is only 4%.

Foreign manufacturers

We analyze oil for the gearbox VAZ 2109 foreign production:

• Mark Castrol, and more specifically EP-80 oil and EP-90, which in the class GL-4 is undesirable to use Samara in the PPC. It is more suitable for sports boxes in its properties.
• But the foreign company Valvoline, which released Durablend SAE 75W-90 oil distinguished itself with good indicators for our car. That semi-synthetic oil In second place, after the recommended domestic oil TM-4-12.
• On the other hand, the same Valvoline, but not the GL-4, and the GL-4/5 is not suitable for the quality work of the PPC VAZ 2109.

We remember that the presence of anti-promotional additives has a positive effect on the whole of the CAT. However, too much of their amount contributes to the speedy corrosion of metals. All this is because antifoxy additives include sulfur sulfur in their composition that corps the gears.

• From this point of view, motor oils are the best applicants (but remember and about the rest of their qualities).
• And again the semi-synthetic Valvoline is close to the standard - TM-4-12. And synthetic, on the contrary, turns out to be the most destructive in this regard.

As for other manufacturers, it is worth paying attention to some points and study the oil composition in detail.
Pay attention to:

• Viscosity
• Temperature Operating Mode - Frozen Temperature
• The number of additives and their type

Good day to all! You went to our site, which means you were looking for what suitable boxing oil VAZ 2110. In this article we will look at what will fit oils for boxes VAZ 2110.

Oil in the gearbox VAZ 2110

So, let's begin. The car VAZ 2110 from the plant is equipped with only a 5-speed manual gearbox. Of course, there are "dozens" that are equipped with and "automata", but this is the result of the re-equipment of the auto "folk craftsmen". These are very rare cases and oil in the VAZ 2110 automatic transmission should be selected in accordance with the installed box. In this embodiment, we will not stop, and consider only what oil is suitable in the mechanical box of VAZ 2110.

The manufacturer recommends using in gearbox VAZ 2110 Oil With the classification of GL-4 by API or universal GL-4 / GL-5. By viscosity in the box VAZ 2110 is suitable for transmission sAE oil 75W90 or 80W90. In any case, the second number must be exactly 90, and the first is selected in accordance with the climate in which the car is directly used. If the climate is soft or moderate, then the oil in the VAZ 2110 box should be chosen with a viscosity of 80W90, if the climate is cold - 75W90. In any case, this is just a recommendation for a comfortable use of the car. In any case, if you will in the box VAZ 2110 Oil with a viscosity of 85W90, nothing terrible will happen. Since the PPC VAZ 2110 is enough "alternating" and unpretentious, even poured into a box of VAZ 2110 The engine oil will not cause any harm. Remember the saying: "Better at least some kind of oil than his absence?". And if somewhere on the road you noticed that oil in a box of VAZ 2110 For any reason, "disappeared", and the nearest store is very far and on hand there are only motor oil, then boldly tosses it into a box, and at the arrival and troubleshooting simply change it to "correct".

Which oil pour into the box VAZ 2110?

So, we determined that oil in a box of VAZ 2110 must match the class API GL-4 or GL-5 and sAE viscosity 75W90. or 80W90.. Since we are in Siberia, and the winter we have enough severe (up to -35 ..- 40s), then it is important for us that after a long downtime, the car started, and the transmissions turned on softly. Often when using poor quality or incorrectly selected oil in the box VAZ 2110 After a long downtime in the cold, it is not possible to enable the desired speed. It falls for a long time to wait with the squeezed clutch and the engineered by the engine until the oil will be warm. In order not to emerge such situations, I recommend year-round use in the VAZ 2110 box with a viscosity of 75W90.

Now consider what oil pour into the box VAZ 2110. Among my personal recommendations are three options. It is a transmission oil for the PPC VAZ 2110, which I myself personally used for several years and which manifest themselves only from the best side.

Best oil in the box VAZ 2110

Honorable third place is occupied by transmission oil Liqui Moly. Hochleistungs-GetRiebeoil GL4 + (GL-4 / GL-5) 75W-90. In general, Liqui Moly products cause me respect. This is German quality and really advanced properties. Why then the third place? Definitely the price that bites "biting". If you are planning to pour into a box of VAZ 2110 really high-quality oil and do not regret money, then you feel free to cross the link to buy transmissine oil Liqui. Moly Hochleistungs-GetRiebeoil GL4 + (GL-4 / GL-5) 75W-90. I am confident, you will be surprised by quality. And if you plan to save, then continue.

How many oil in the VAZ 2110 box?

This is the last question we will analyze today. So, oil volume in the gearbox VAZ 2110 It is approximately 3.3 liters. This is the volume when the oil is pouring to the MAX mark on the dipstick. But knowing the KPP VAZ 2110 device, you should pour a little more level maximum. If you navigate the schu, then it is 3-4 mm above the maximum mark. Judging by volume, then additionally 200-250 ml. This is due to the fact that the design of the 5th transmission when filling the PPC VAZ 2110 oil to the MAX mark does not allow to be completely mistaken this speed. Therefore, it is better to pour a little.

Let's summarize. In the PPC VAZ 2110, the transmission oil is poured with aPI class GL-4 or GL-4/5 and 75W90 or 85W90 viscosity. For replacement it is necessary to 3.3-3.5 liters. Among better options Oils for PPC VAZ 2110 remain Liqui Moly, Petro-Canada and Zic. These are only my recommendations. With a full list transmission oils for the VAZ 2110 box You can read and buy by

The transmission lubrication oil facilitates the work of this machine assembly, takes care of it, extending the service life. While driving, any transmission is constantly highly loaded, subjected to complex tests. Accordingly, it is properly picking oil for mechanical box Gears - the question is not out of simple. But we focus you in his decision.

Oil functions in MCPP

Understanding why this type of oil exists, it will help to determine which fluid it is necessary to take for its mechanical gearbox (manual transmission or MTF). During the operation of the gears, bearings and gears of PPC are constantly in contact with each other. The strength of friction and impacts to a certain extent opposes the slip between gears, which gives various fluids for the transmission. They are also removed from the mechanical nodes of rust particles, dust, dirt, heat resulting from friction force. The transmission is functioning in sophisticated conditions, experiencing constant pressure and longitudinal slip. That is, there are clear characteristics that can correspond to the oil transmission.

Interesting! Lubrication of bearings and gear oil passes through splashing or immersion. If the brand of the machine is designed taking into account the increased loads on the transmission, the oil is supplied to the checkpoint forced under pressure.

There are special brands of machines for driving in difficult conditions. ambient. Special mixtures with specific additives are created to care for their gearbox. They increase the use of oil, keeping their properties longer.

Types of oil for transmission

The mechanical transmission lubrication fluid has three basic types that differ depending on the base used: mineral, synthetic and semi-synthetic. Let's look at each of them.

Mineral

The fluids created on this basis are considered the most popular because they are in the low price range. Manufacturers try to add a high percentage of sulfur in them to increase quality indicators, but it still remains relatively low.

Note!It is impossible to mix liquid on mineral-based with synthetic and vice versa. Therefore, when you decide to change one oil in a manual transmission to another, it is necessary to completely pour out the entire former lubricant from the system. Even if you go to the semi-synthetic oil.

Synthetic

Her main feature is excellent fluidity. But this advantage is back side. When the operating temperature of the box reaches extreme marks, a liquid leak appears through the glands. Most often, similar troubles arise from cars with considerable mileage.

Another plus of such a basis is to the viscosity of the transmission oil of a similar type, a little affects the decrease in the air temperature in winter. Therefore, it is usually used for all seasons.

Semi-synthetic

This is a transitional option between the species described above. It boasts best characteristics compared with mineral oilsAnd at the same time it is noticeable less than synthetic.

Interesting! MCPP can be lubricated with a liquid intended for automatic transmission. Experts consider it even more useful for mechanics. But the cost of such a fluid will be much higher.

Marking API.

The type of lubricating fluid on the package displays marking API.. It has five classification groups: from 1 to 5. They also also with the letters GL. The big digit indicates the high quality oil in terms of antisaded and detergent properties. Types of liquids on this labeling are characterized by such indicators:

GL-1 - mineral base without additives;

GL-2- for use with high fat products;

GL-3. - has additives against scaling;

GL-4. - integrated oil with a wide range of additives;

GL-5. - Improved version of the previous type.

Most often acquire oil of the last two types for moderate and high loads. Some experts recommend using the fourth type only in front-wheel drive cars, and the fifth to the rear-wheel drive. The first three is recommended to pour into old and used cars, while the last two are in new foreign cars. The most versatile for manual transfers is 75W-90 oil.

Note! When replacing oil in a manual transmission, only its half is updated. The rest is in the MCPP and does not merge. To replace the liquid in the box completely, it is necessary to disassemble all it.

American engineers divided transmission oils into three groups: summer, Winter and apartment. The fluids differ in temperature indicators under which their use is permissible. On the label, the group is indicated by numbers near the letter W. In this case, the figure that stands in front of it speaks of the lowest temperature at which the oil does not lose the stated properties. The second digit indicates the highest temperatures in which it can be operated. That is, the smaller the first digit, the lower the temperature at which the oil does not freeze, and the second indicator indicates its viscosity index.

What to rely on when choosing an oil

So, if you need a replacement of oil in the gearbox, and there is a mechanic on your machine, you need to choose a liquid by the type of its base and the peculiarities of its viscosity. Consider at what temperatures liquid will be used, take into account the characteristics of your machine: production, year of manufacture, use mode.

Interesting! The gradation of lubricating fluids according to the degree of viscosity was developed by the American Association of Automotive Engineers (Society of Automotive Engineers). It was the abbreviation of this organization that gave the name of the Viscosity Standard - SAE.

However, do not forget that the automotive industry is constantly developing. Today, the market is filled with a mass product, the line of which each year is replenished with new ones. Improved oils appear, the tips are changed by their use. Therefore, it will be right every time to contact a specialist at the station maintenance. It not only recommends and replaces the oil, but also conducts the diagnosis of the box, will give advice, how often it is necessary to change the oil in the manual transmission.

Car gearbox VAZ 2110, unit, which serves for a long time. However, there is an important requirement: after a certain run, it is necessary to make a replacement of oil into a box 2110. Such work is carried out with your own hands and takes no more than an hour. Typically, the procedure is performed after 75 thousand runs, but sometimes this figure changes. It all depends on the operational loads on the machine. In some cases, it is necessary to replace and after 40 thousand km.

The VAZ2110 gearbox consists of parts that constantly interact with each other. As a result, their wear occurs.

To reduce the abrasion of the elements, the transmission oil is poured, which performs the following functions:

• the checkpoint constantly supports a certain temperature level;
• the risk is eliminated by rust, as a result of metal corrosion;
• noise is reduced during operation;
• vibration decreases;
• protection from shock loads is underway;
• there is a constant flushing of working areas by leamming small metal particles.

It is important to know which oil is poured into the gearbox VAZ 2110. Each species have their own degree of viscosity. Working temperature 80-120 degrees are supported. In the conditions of harsh climate, it is difficult to maintain such a temperature at high viscosity Oil. This will lead to the difficulty of the work of the gear.

If failures are observed in the CAT, this happens for the following reasons:

• it decreased the amount of liquid substance;
• poor-quality lubricant.

In the first case, it is necessary to constantly observe the level, and in the second one follows the passport instruction.

Varieties of oils

During the procedure, you should know which oil to fill in the VAZ 2110 box.

They are divided into 3 types:

1. Synthetic. It is characterized by a high degree of cleaning. The composition includes various additives, protecting parts from corrosion. Replacement is carried out every 65-75 thousand km.
2. Semi-synthetic. The percentage of additives is much smaller, so the oil changes more often. It is advisable to pursue such a procedure every 45-55 thousand km. The advantage is lower cost.
3. Mineral. Refers to crude oils. The loss of properties is observed after 20-30 thousand km of mileage. After that it is subject to replacement.

On the conducted surveys among motorists, what oil to fill in the Box of the VAZ 2110, the majority made their preference in favor of semi-synthetic. This was motivated by the fact that in conditions of harsh climate and heavy roads there are increased wear of gears. Therefore, after 50 km of mileage, the oil change is necessary.

Choosing a manufacturer

To figure out which oil pour into the PPC VAZ 2110, you should know that 2 groups are recommended for such cars:

• SAE80W-85 (GL-4 / GL-4/5);
• SAE75W-90 (GL-4/5).

In these labels, GL-4 applies to vehicles with front-wheel drive. GL-4/5 indicates the versatility of lubrication. It is used in conditions of high loads. SAE digital parameters indicate the viscosity of the product.

To do a good choice And to understand which oil is better to pour into the engine VAZ 2110 8 valves, you should familiarize yourself with the variants of the transmission oils, which are presented in the table.

Name	Characteristic	Photo
Zic G-F TOR 75W90	Such an oil takes 1 place from all others. It is inexpensive and can be used under any temperature conditions. In the process of work showed itself the best side
Petro-Canada Traxon XL 75W90	It is manufactured by the Canadian manufacturer. Just well manifests itself in frosty weather and can be used at any temperature.
Liqui Moly Hochleistungs-GetRiebeoil GL4 + (GL-4 / GL-5) 75W-90.	Manufacturer Germany. Oil is distinguished high german quality. The lack of a large price of products

Answering the question: what oil pour into the PPC VAZ 2110 should not be remembered - it should not be saved. With severe frosts, the transfer switching is not possible. While the box does not warm up, time will be lost. The qualitative lubrication will contribute to the gentle movement of the lever.

The question often arises: how much to pour oil into the VAZ 2110 box. The total volume is 3.3 liters. However, the fill of oil into the box is 3.5 liters. This is due to the fact that the phase aggregate. For increased level The latter transmission gears are better.

Making an additional overflow is not recommended. This is due to the fact that the excess oils will penetrate through the glands of the drive wheels, and at the same time squeezing them. If, overflow has already occurred, it follows using a medical syringe with a long tube, pump up an extra quantity through the control opening.

To check the level you need to make a few simple actions:

1. Near the thermostat and starter is the probe gearbox. It is twisted.
2. With the help of a dry cloth wipes well.
3. It is installed in the original position and one and a half ten seconds are counted.
4. It is pulled out and checked again. The liquid level must be on the MAX mark. A small excess is allowed.
5. Probe finally returns to the place.

If checking in the absence of probe, then it is necessary to understand how much oil needs to be added to the VAZ 2110 box, the car is required to drive to the observation pit or the overpass. If there is no such possibility, the use of the lift is allowed.

Next steps are as follows:

1. Using the key on 17, the control plug is unscrewed.
2. If the quantity is normal, a drop appears from the hole. The oil level is just corresponding to the lower point of the opening.
3. The plug is installed in place.

If you want to hold a plot, then you must remember which oil was flooded with the transmission of VAZ 2110. The use of another brand is prohibited. It is necessary to comply with the same viscosity. The topping is carried out with a syringe or funnels until the oil starts to pour out.

Rules of fill oil in the box VAZ 2110

In order for the PPA to serve as long as possible, only certified oils can be used. To know which oil is better pouring into a box of VAZ 2110. During the movement, only smooth accelerations and move with the optimal speed of 100-120 km / h. If it is not possible to find the required fluid, you need to try to find close by parameters.

The rules are also maintained:

1. Attention is drawn to the seasonality of lubricant material. Summer is used in summer, and winter - winter. Universal applied at any time of the year.
2. Before the start of the work, the engine is well heated, so that all particles of waste are released during draining.

Tool blank

It should be remembered that if the drain plug is in a convenient location and access to it is open from the side of the observation pit, the location of the fuel hole is in a less accessible place.

The following tools and materials will be required for the fill:

• key with head at 17;
• clean rags;
• rigid, thin wire;
• capacity, up to 5 liters;
• funnel or syringe;
• thin hose, up to 30 cm long;
• new oil in the amount of 5 liters.

Drain of work

To change the oil for the gearbox, it is better not just to start the engine, but also drive 5-7 km on it.

The following actions are followed:

1. The car is drunk on the pit, the overpass or put on the lift. After that silent.
2. A tube is removed from the breather and cleaned from dirt.
3. It takes in the hands of a blank container and is taken to a drain plug, which is neatly unscrewed.
4. Oil drains time goes up to 15 minutes. It is necessary to wait to completely stop the drops.
5. The plug is well washed and twisted.

Flushing process

It is necessary for cleaning the box from small, metal particles. For this, a special liquid is used.

Washing is carried out as follows:

1. The front wheels are postponed so that they do not get to the ground.
2. Through the neck, 1 liter of washing fluid is poured.
3. The engine starts, the transmission is turned on, and this mode is maintained up to 15 minutes.
4. The car is muffled, and the liquid is completely merged.

Fill fresh oil

You can pour oil into the VAZ 2110 box with a funnel if there is a bay neck or a syringe with a tube in its absence.

In the first case, you need to follow the following rules:

1. A funnel is inserted into the plotty neck.
2. Through it poured 3.5 liters of oil.
3. As soon as it falls, the level check is conducted.

In the absence of a filling neck, a syringe with a tube is used.

The order of work is as follows:

1. The hose is inserted into the control hole and the syringe is injected with oil.
2. The procedure is carried out in several steps until the oil is reached the lower point of the control opening.
3. The plug is tightly twisted.

After the fill fresh oil You should start the car and go to her several km. It is necessary to New transmission substance Filled corners of the box and smeared all gears.