Combines W Series represent an updated line of combine harvesters John Deere.which in 2007 came to replace the WTS series combines.
These combines are equipped classic system Through thread and finger separator. This ensures additional separation in the back of the straw outline. The material layer is thinned and accelerated by a finger separator, the combined grain, passing through the holes between the sophisticated layer, falls on the sieve. Long subbarabans or a large inertial drum can be configured to collect any crops and under any conditions. The drum has 10 beaches evenly distributing the material during thread and reduce it to accumulate it in this processing site. With the help of a bite with a large diameter, high-quality culture rapid and additional separation is ensured, and the presence of secondary pads increases the separation area.
The subbarabania can be adjusted by adjusting to the culture and harvesting conditions. With the help of long keys of the straw, a good separation of crops is provided, as well as high quality straw and small power costs. This is the best and optimal solution For agricultural producers growing several crops and harvests in different conditions.
Thanks to the gear design, greater grain capture is ensured. You can increase the performance of your combine by 23%. You can install innovative, integrated and intelligent systems such as AutoTrac, Harvestsmart, Harvest Doc to be installed on new combines and their modifications. The Harvestsmart system is responsible for changing the combine speed to achieve the maximum permissible loading of the wound system throughout work in the field. The presence of the AutoTrac system is responsible for controlling the combine in automatic mode. The Harvest Doc system collects data on crop yields and enters them on the field map, as well as in graphical form displays data on fuel consumption. All the information collected can be transferred to the computer and work with the help of a specially designed software. The use of all these measures allows you to increase the productivity of the combine by 23%.
Specifications W 540:
| Specifications | unit of measurement | W540. |
| PowerTech Engine (Tier3), Volume | l. | 6,8 |
| Maximum power | kW / K.S. | 191/255 |
| Productivity of hydraulic pump transmission | l / S. | 105 |
| Number of speeds of transmission | pC | 3 |
| Diameter of the threshing drum | mM. | 660 |
| Barabana width | mM. | 1400 |
| Cab, basic options | – | Deluxe, Radioforking, Radio Antenna, Air Conditioning |
| Wheels and tires | – | Front: 800/65 R 32 - 172 A8 Michelin Megaxbib (3900) Rear: 540/65 R 30 150 D MICHELIN XM108 (Distance: 3700) |
| Cleaning system | – | Auger with fan quadraflo |
| Square Podbarabhanye | m 2. | 1,05 |
| Pickup angle of subbarabania | ° | 116 |
| The area of \u200b\u200badditional subbarabania | m 2. | 0,42 |
| Bateter Dimet | mM. | 400 |
| Number of keys of straw-stains | pC | 5 |
| Length keys / number of steps | m / pcs | 4,6/11 |
| Separation area | m 2. | 6,4 |
| Fan speed | rpm. | 750…1600 |
| Diameter of the finger separator | mM. | 410 |
| Quantity Number / Type | pcs / H. | 15 / nominated |
| Volume of grain bunker | l. | 8 000 |
| Unloading speed | l / S. | 88 |
| Placing illuminating lanterns | – | cabin, auger, bunker, thump |
| Volume of fuel tank | l. | 700 |
| Weight | kg | 12 580 |
Buy Combine Combine Dir (John Deere) W 540 - Eurotrans company
Combine harvesters under the brand name John Deere has long occupied leading positions in the market of similar agricultural machinery. And it should be noted that it is not for nothing. Judging by the data available, about half of the combines sold in different countries, it is. The main production of the company's combine harvesters is concentrated in Illinois, in the United States, at the John Deere Harvester Works factory and in one of the cities in Germany, Zweibryukien. The beginning of production was in 1927, it was then that the first batch of combines was released in America. Since 1965, the company already conquered recognition, decided to master Europe and began to produce grain-harvest equipment on its territory.
John Deere Combine Operation
Huge popularity among farmers of this brand has won, thanks to wide model row, multifunctionality and high performance performance. The entire process of harvesting agricultural grain crops, ranging from their cutting and ending with the thread and cleansing of grain, with the use of special equipment began to perform much easier. The high competitiveness of John Deere combine harvesters has determined newest technologies and recent developments in the field of engineering and design.
In addition, this technique is superbly adapted to the terms of the Russian climate and differs in high performance, compared with similar models of other manufacturers. The conducted tests proved the economic benefit from the operation of John Deere Combines, and their widespread distribution in most European and American countries once again Confirm the benefits of this technique. Of course, for the opportunity to work on high-quality machines You have to pay considerable amounts. So, for example, a used model of release of almost 10 years ago cost from 4.5 million rubles and higher. New combines can be purchased from 8.5 million rubles. Similar price policy at the time of buying .
John Deere Combine Characteristics
The new design of a threshing machine, which includes teeth thounded drum separators and active straw-stroke, effectively copes with the tasks and reduces the possible losses of the grain to a minimum, even during the process of clogged and wet breads. The main parameters of the work of any John Deere combine are set and tracked using an electronic system.
Comfortable cabins and the optimal arrangement of the technician controls allow the operator to work, not tired, sufficiently long time. Four absolutely different concepts, according to which John Deere has developed a release, represented by four series of combines.
John Deere Combine Modifications
Thus, the W series, produced in the city of Zweibrücken, found its use in the area of \u200b\u200bhigh yield. These reliable machines, due to the drum processing system and the keyboard straw, carefully remove the grain crops even on the processed areas located with a slope of up to 22 °, while the quality of the straw remains very high. The combines of this series are easy to maintain, differ in economical fuel consumption and high load capacity.
Another series, S, is an axial-rotor system of grinding and separation with maximum performance and suitable for cleaning wet breads. The convenient interface and the ergonomic of the cabin allow the operator to easily perform the existing scope of work, and workplace Differs in high comfort.
The combines of John Deere T series have a 5-speed separation system and a threshing drum rather large size. In addition, the finger separator, a cake and straw-strokes cope with serious loads, is extremely easy, and half of the straw when cleaning the territory is thrown over the process.
The C series combines are characterized by a multipalous separation system, which indicates their highest performance and obtaining grains of excellent quality. Installed drum and separating system - classic type. Series machines with optimally used in difficult cleaning conditions. The operator, while in the cockpit, has the ability to select grinding or reset mode and thus determine the residual processing system.
Production is discontinued.
Designed for harvesting crops. The combines of the 9000 series have an axial-rotor system of thread and separation. Regardless of the country of origin, all components in the John Deer technique are manufactured in accordance with the metric measurement system, and the supply of spare parts is made from warehouses in Europe.
Inclined camera.
The enhanced drive provides a stable supply of mass in difficult cleaning conditions. The inclined chamber has 6 adjustments - both in transverse and longitudinal directions, which ensures maximum adaptability to the state of the culture and the field relief. Unlike most modern combines production of other companies, on combines, John Deere can also regulate the angle of the header attack, which allows you to more effectively combine the harsh bread and low-rising cultures, with minimal wear of the bottom of the header. On the other hand, this adjustment Provides parallel to the bottom of the header field, when installing tires / wheels with abnormal dimension - either with a decrease in tire pressure to increase clutch with soil. Thus, the maximum combine productivity is achieved and the possibility of taking the soil even on uneven fields is almost excluded.
Electrohydraulic automatic system Copying the relief of the field "Headerz" provides work with equally high performance on uneven fields, fields with a slope, when working at night, as well as when cleaning fires. All information about the operation of the system and the level of the field relief is displayed on a special monitor.
The increased length of the inclined chamber provides the operator a great overview of the header working area.
The most powerful reversal device is 100 hp When reversing, the reversal is automatically rotated in the opposite direction.
To install / disconnect the header, the tool is not required; Hydraulic highways and wires electricians header are collected in a single discontinuous coupling (photo on the left). Unlike similar devices on combines of other manufacturers, it also has additional device For the simultaneous control of the header fastening lock, which provides additional comfort.
System Stsm Sts.
An innovative feeder feeder provides a uniform dialing of the main rotor mass. The supply of mass occurs on a segment of 270 degrees, while the remaining manufacturers are only 180 degrees.
The innovative system of the STS threshold consists of three parts: the first section provides the distribution and supply of mass to the zone of thread, in the second portion represented by 27 threshing elements, the mass is tightly and the remaining grain remains at the latter.
In the combines STS, a 3-speed asymmetric rotor shirt has been implemented, the release of the bread mass gradually when it is grown as it is wiping. At the top of the deck of the rotor there are plates that guide the mass to the rear of the combine. For a more optimal release of the bread mass and its inlet, the distance to the turns increases. This solution not only improves the swelling, but also requires smaller power take-off and, therefore, reduces fuel consumption due to the more optimal advancement of the breadth of the Rothor. There is also no unnecessary nonsense of straw.
The separating part of the rotor consists of six rows of fingers, intensely tearing layers of straw and ensuring the absence of losses even in the most severe cleaning conditions.
After the main rotor, the feed drum was installed, which transports the mass from the rotor to the straw-breaker. The drum consists of 5 blades, replaceable combs of which can be turned over, increasing their service life and reducing operating costs.
The subbarabanium is 3 species: a large-scale wire, fine wire and rod. A large-scale wire subbarabane is recommended to use under the thread of popcorn-corn, soybeans. A fine-fledged wire subbarabane is recommended to be installed when grain, sunflower, rape, rye, corn (up to 25% humidity), as well as hard-saw crops and rice. The rod, the subbarabhanne is installed when harvesting corn on the grain (in dry conditions), soybeans and green peas (free processing of the combine harvester with a discharge belt conveyor).
Cleaning.
Constructively, the cleaning system consists of transporting auks, a preliminary cleaner, solves rough and thin cleaning, rotary fan. The rotary fan design provides a dense flow of air mass, evenly across the width. The air flow is distributed between the solutions in the proportion of 20 to 80.
Powerful wear-resistant conveyor augers easily and evenly serve material on the rested mill. The high efficiency of the screws is especially noticeable when harvesting high-yielding crops, for example, when harvesting corn. A preliminary cleaner removes up to 40% of the sex. Thus, the main solutions are unloaded. The laser tracking system for the volume of non-combustible grain provides the transfer of accurate information that is necessary for proper setting Components cleaning system.
Standardly installed plate universal solutions, it is possible to install special flat solutions, for example, for harvesting corn. In the combines of STS series, the gap adjustment servors are installed from the cab (on the model 9880 - standard equipment), controlled by the automatic adjustment system of the combine for a number of cultures. Adjustment is solved automatically, based on the predetermined indicators for a specific combine culture, on the go. This allows you to reduce grain losses on cleaning, while simultaneously increasing the efficiency of working time and overall processing of the combine.
Grain bunker with a capacity of up to 11000 liters.
The composition of the model 9880 has a bunker equipped with a double lid preventing moisture from entering. A special extension can be installed on a series of models that increases the useful volume of the grain bunker. The opening of the hopper cover is carried out from the control panel in the cab. You can take the grain sample from the bunker directly from the cabin.
The unloading auger is supplied in 3 versions: 5.60 m, 6.60 m and 6.90 m - depending on the selected width of the header. When discharge on the move, it is possible to increase the engine power by 34 hp, which allows you to simultaneously carry out combine and rapid.
On the combines STS 9760 and 9860, high-performance discharge screw drive was serially installed: 11000 L bunker is discharged in 1.5 minutes. Grain unloading is possible in any position of the discharge auger.
Strawscale.
A straw can either put into rolls or grind and distribute across the field. STS series combines are serially equipped with a straly chopper with an integrated sex spreader; At the same time, the floor is scattered with a shared stream of crushed straw or ejected to the side.
Straw scattering is uniformly on a width of up to 9.15 m, which is especially important with minimal and zero soil processing technology.
Two ranges of the grumble of the straw-cholesterol (1500 and 3200 rpm) allow you to choose the optimal value to work with grain crops, corn and other cultures. The drive of the straw breeder is made by 2-stream wedge-shaped belts, which guarantees complete transfer Power and longer service life. Solo-breaker drive pulleys are closer to Earth, to facilitate the change of the range of speed of its operation.
For major grinding, you can use conventional or fixed knives, for fine grinding - gear knives. Moreover, the knives of the straw-nucleus located on the sides have a bent in the form of a blade shape, providing an additional air pressure to dissipate crushed residues to a large width.
It is possible to electromechanical adjustment of the blades of the reflector directly from the cab, which allows you to adjust the strength and direction of the wind and the relief of the soil, especially when working on the slopes.
Comfortable cabin.
System automatic control Air temperatures in the cabin enters standard complete set Combine. An excellent overview of the working area is a glazing area of \u200b\u200b5.2 m². Controls are conveniently located in a logical sequence.
Four separate displays with control buttons are conveniently located on the right vertical cab stand. Unlike many modern combines of other manufacturers, John Dir combines are more simple in management, as they do not have complex hierarchical menu systems. Therefore, John Deere's management training takes less time, and combine operators use the entire potential of machines.
Drives.
The rotor drive is equipped with a "Position Torque" system - automatic belt tension depending on the power being taken, which ensures the transfer of force from the engine without loss and slipping belt, i.e. Without power loss (and unnecessary fuel consumption). At the same time, the "Position Torque" system reduces the drive belt wear, reducing the cost of operation of the combine.
In general, the STS combine drive system includes only 12 belt gears, which also reduces operating costs and increases its reliability. Drives solicing and grain elevator are located on the right, along the movement of the combine, providing free access to the separator.
Harves and adapters.
The STS series combines are equipped with rigid and floating auger and linen grain headers, corn adapters and roller feeders.
Complete set / optional equipment.
Combines are completed, depending on the specific conditions of operation and wishes of the Customer, various types of boasters, sets for the preparation of the harvester for corn cleaning and other types of equipment. John Deere also offers a wide selection of sizes and tire stamps, such as Bridgestone / Firestone tires, the warranty period of which in the CIS is 4 years.
Computer monitoring system "GRINSTAR". This system ensures current information about the yield of a retractable culture and its humidity. The system allows you to draw up computer productivity maps of fields, which can then be used by the subsequent train of John Dir machines.
The newest development of John Dir is the AutoCrack system for combine harvesters, which automatically controls the combine movement along the field parallel to the previous aislers. The system processes a signal simultaneously with 21 satellites located on the geostationary orbit of the Earth. Thus, unprecedented accuracy of the passages is ensured, and the maximum error is no more than 5 cm. You can appreciate this additional option working with a wide harvest, seizure, for example, 9 m, as well as on the slopes and in dark time day. Thanks to the "Auto", the load on the mechanizer decreases and the combine performance increases.
All Sts Series Combine harvesters can be equipped with Harvestsmart system, which automatically adjusts the working speed of the combine, based on a number of factors: the conditions for combining (the humidity of the bread mass, combining on the slopes), the bulk mass on the conveyor of the inclined chamber and the threshing drum, loading Solomotreas, the magnitude of the straw-stroke loss, load on the engine. "Harvestsmart" significantly increases the performance of the combine, while simultaneously improving the quality of the extraordinated grain.
The solid camp can be equipped with an electromechanical adjustment of the angle of inclination solits (in the model 9880 - in a standard package). In combination with the automatic adjustment system (for a number of crops) of the combine. Adjustment is solved automatically, based on the predetermined indicators for a specific combine culture, on the go. This allows you to reduce grain losses on cleaning, while simultaneously increasing the efficiency of working time and overall processing of the combine.
The combine of the STS series can be equipped with a special frame of the header suspension, which changes the angle of the header attack within +/- 8.5 degrees, providing the optimal distance between the knife mill and the earth in combining the following cultures and / or installation of the front wheels of the larger diameter and / or when Reduced tire pressure to increase clutch with soil.
Sts series combines can be manufactured in rice cleaning equipment. At the same time, all elements of the combine coming into contact with the abrasive material are made of either stainless steel (grain elevator, grain hopper, discharge auger, etc.) or alloy steel with heat treatment, or have a bronze spraying for maximum extension of the service life of the combine.
At the request of the customer, the combines are equipped with xenon headlights of work lighting. Their light flux at a distance of 10 m in 1.5, and at a distance of 80 m - 2 times more intense than in conventional, halogen headlights.
Maintenance.
Most nodes in the combine are driven from the hydraulics system. When performing work on maintenance You are dealing with fewer belts and chains than on combines of other manufacturers. At the same time, they are all easily accessible.
Numerous backlight service lamps provide excellent visibility of all nodes and aggregates when performing in the dark time. Intervals tracks on-board computer; When the date of the regular then the computer displays the relevant information on the display.
STS combine drive system includes only 12 belt gears, which significantly reduces operating costs and increases its reliability. Drives sings and grain elevator are located on the right, along the movement of the combine, ensuring excellent access to the separator.
The modular fan design, the rotor feeder and the straw unit ensure open access to these nodes.
To manage the loading, it is possible to close the back of the subbaraging of the Rotor.
The rotation speed of the rotors changes steplessly in wide ranges, adapting to specific cleaning conditions.
In the rear of the rotors there are 4 blades that ensure uniform feeding of straw in a straw-choler.
Cleaning
Constructively, the cleaning system consists of transporting auks, a preliminary cleaner, solves fine and coarse cleaning, rotary fans.
Powerful wear-resistant conveyor augers easily and evenly serve material on the rested mill. The high efficiency of the screws is especially noticeable when harvesting wet crops, as well as when working on the slopes.
A preliminary cleaner removes 25% of the wiggle. About 1/3 of the grain after passing pre-purification, it falls directly into the screw of the pure grain, which reduces the volume of grains and the wiggle passing through the rested mill.
The laser tracking system for the volume of non-column grain provides the transfer of accurate information that is necessary to correctly adjust the components of the cleaning system.
The solvent camp from the left and right edge is equipped with lattices with elongated bars, so that with a transverse slope to 7-9 degrees, the accumulating multi-layer heap of the extinction returns to the dobmolot, without increasing losses.
Grain bunker
Unloading a complete bunker with a capacity of 10,000 liters is made in 2 minutes.
The bunker is equipped with a double lid preventing moisture from entering. A special extension can be installed on a series of models that increases the useful volume of the grain bunker. The opening of the hopper cover is carried out from the control panel in the cab.
You can take the grain sample from the bunker directly from the cabin.
The unloading auger is supplied in 2 versions: 5.20 m and 6.10 m, depending on the selected header width. When discharge on the move, it is possible to increase the engine power by 34 hp, which allows you to simultaneously carry out combine and rapid.
Grain unloading is possible in any position of the discharge auger.
Straly chopper
A straw can either put into rolls or grind and distribute across the field. The straw-chicker is equipped with an integrated half-sized spreader; At the same time, the floor is scattered with a shared stream of crushed straw or ejected to the side.
Straw scattering is uniformly on a width of up to 9.15 m, which is especially important with minimal and zero soil processing technology.
Three ranges of the number of revolutions of the straw-choler allow you to choose the optimal value for working with grain crops, corn and other cultures.
For major grinding, you can use conventional or fixed knives, for fine grinding - gear knives.
Electrical adjustment of the blades of the reflector allows directly from the cab to carry out adjustment, taking into account the strength and direction of wind and the relief of the soil.
Comfortable cabin
The system of automatic control of the air temperature in the cab is included in the standard combine set.
An excellent overview of the working area is the glazing area of \u200b\u200b5.2 m2.
Controls are conveniently located in a logical sequence.
Four separate displays with control buttons are conveniently located on the right vertical cab stand. Unlike many modern combines of other manufacturers, John Dir combines are more simple in management, as they do not have complex hierarchical menu systems. Therefore, John Deere's management training takes less time, and combine operators use the entire potential of machines.
Harvesters and adapters
CTS series combines are equipped with rigid and floating screw and linen grain headers, corn adapters and roller feeders.
Engine and drives
Engine power 336 hp, plus additional power during unloading.
Engine, the volume of 8.1 liters has an innovative completely electronic system fuel injection.
The main drive is included by the 4-disk friction coupling.
Complete set / Additional equipment
Combines are completed, depending on the specific conditions of operation and wishes of the Customer, various types of subbarabans, straw-choles, sets for the manufacture of combine harvester for corn and other types of equipment. John Deere also offers a wide selection of sizes and tire stamps, such as Bridgestone / Firestone tires, the warranty period of which in the CIS is 4 years.
The sharp modification of the combine - the Hillmaster II system. The system consisting of pendulum gearboxes of wheel drive and 2 heavy duty hydraulic cylinders holds a combine in a horizontal plane with a transverse basis to 15 degrees. Thus, in contrast to the systems used by other manufacturers, the mass is racing not only at the cleaning stage, but also thread and separation, which increases many times the combining performance and reduces the total losses to the absolute minimum. Hillmaster II also allows you to fill in the grain bunker completely.
In combination with the SLOPMaster system, providing reliable cleaning with a slope of up to 7 degrees, the Hillmaster II system allows the combine to work on the slopes to 22 degrees with the same quality as on the smooth surface.
Computer monitoring system - "GRINSTAR". This system will provide you with current information about the yield of a retractable culture and its humidity. The system allows you to draw up computer productivity maps of fields, which can then be used by the subsequent train of John Dir machines.
The newest development of John Deere is the AutoTrak system for combine harvesters, which automatically controls the combine movement along the field parallel to the previous aisles. The system processes a signal simultaneously with 21 satellites located on the geostationary orbit of the Earth. Thus, ensured unprecedented The accuracy of the passages, and the maximum error is no more than 5 cm. You can appreciate this additional option working with a wide harvest, capture, for example, 9 m, as well as on the slopes and in the dark. Thanks to the "Auto" load on the mechanizer decreases and the productivity of the combine.
Combines of the CTS series, since 2005, can be equipped with the Harvestsmart system, which automatically regulates the working speed of the combine, based on a number of factors: the conditions for combining (the moisture of the bread mass, combining on the slopes), the bulk mass on the inclined chamber conveyor and the threshing drum, the loading of the straw draw, the magnitude of the straw-stroke loss, the load on the engine. Harvestsmart significantly increases the performance of the combine, while improving the quality of the extraordinated grain.
The solid camp can be equipped with an electromechanical adjustment of the angle of inclination. In combination with the automatic adjustment system (for a number of crops) of the combine. Adjustment is solved automatically, based on the predetermined indicators for a specific combine culture, on the go. This allows you to reduce grain losses on cleaning, while simultaneously increasing the efficiency of working time and overall processing of the combine.
At the request of the customer, the combines are equipped with xenon headlights of work lighting. Their light flux at a distance of 10 m in 1.5, and at a distance of 80 m - 2 times more intense than in conventional, halogen headlights.
Maintenance
Combine John Deer 9780 CTS has no lubricant point daily. No node is lubricated more often than 1 time in 50 hours. No other manufacturer has similar indicators
Combine John Deere 9500 is an excellent agricultural machinery of American production. This Combine is real working horse With the optimal combination of "price / quality".
The John Deere 9500 model is popular around the world. Suffice it to say that in North America over 40% of the Combine Park accounts for this model. In addition, the John Deere 9500 combine is characterized by simplicity in control, elementary and sufficiently cheap service and a large number of unified spare parts that can be purchased in all specialized centers.
Technical characteristics of the combine John Deere 9500.
This combine does not differ in the highest technical indicators or especially powerful engines. This is a medium in terms of technical indicators of a combine, American hard worker, capable of working day long. He lacks stars from the sky, but is able to qualitatively cope with the cleaning of major grain crops.
In the one presented table, all major specifications American combine.
| Characteristic | Value | Measured unit |
| Engine view | Own Development (model John Deere 6076) | |
| Engine power | 228 | Horse power |
| Ton Engine Scope | 8 | Lithrov |
| Fuel tank capacity | 530 | Lithrov |
| Fuel consumption at medium load | 62 | Liter per hour. |
| Maximum performance | 9 | Tons of collected grain per hour. |
| Grain bunker | 7,5 | Cubic meters. |
| Maximum speed Unloading | 4500 | Liters per minute. |
| Minimum Radius Radiation Combine | 3,2 | Meters |
| Combine length (without hinged equipment) | 4 | Meters |
| Combine width (without hinged equipment) | 9 | Meters |
| Combine weight (without hinged equipment) | 11,5 | tons |
Features of the design of the combine John Deere 9500.
In order to understand the advantages and disadvantages of this combine, it should be clearly understood all his constructive features. Consider the main aggregates of this agricultural machinery separately:
Engine.
In the combine, John Dir 9500 uses the engine of its own development of the American company. Set very simple and reliable engine 6076H with forced system air cooling. Exists special series Combines intended for intensive work in the hot regions of Mexico with the engine 6076t. It uses a high-quality liquid cooling system. The disadvantage of such an engine is the need for regular and quality maintenance of the cooling system.
IN technical Plan, this motor It is classic force aggregate With six cylinders in a row. The diameter of one cylinder is 11.5 centimeters, the stroke of the piston is 12.1 centimeter.
In the engine there is a turbocharger, and the fuel supply is carried out directly, which saves fuel.
Special pride of the company - the unique system "POZI-TROK". The system automatically adjusts the tension of the drive belt, and thus significantly extends the belt life by reducing the cost of buying spare parts.
Control system.
John Deere 9500 combine control is quite simple and therefore very reliable. It is based on an open hydraulic system. All the basic controls (dosing pump, gearbox, shafts) are under the cabin, and get to them very simple, which makes it easier possible repair and maintenance.
When turning the steering wheel in the left or right, the dispenser is started, which distributes oil pressure into the left or right cylinder. As mentioned above, a similar system is as simple as possible, it is used a long time ago and has the highest maintainability. If necessary, the steering system can be repaired directly in the field.
Hydraulic system.
Combine John Dir 9500 has a very serious hydraulic system, with several independent pumps. For example, one of the pumps is necessary for the operation of the suspension equipment, the other for the main hydraulic system, the third is responsible for the scattering system of the spent straw. In order to filter oil in the hydraulic system used two oil filters Rough and fine cleaning.
Besides, hydraulic system The combine is responsible for the work of the threshing drum, lifting and lowering the header and other suspended equipment. Also, with the help of hydraulics, the bunker is unloading for grain and the movement of Motovil.
Electrical system.
Electric combine system John Dire 9500 consists of a generator for 90 amps, and a pair of large batteries. It should be said that the batteries work in parallel, and the agricultural equipment is capable of working only with one running battery.
Thanks electrical system There are lamps of external and internal lighting, air conditioning system, instrument panel, electronic clock and emergency combine system.
Transmission system.
The transmission of the combine consists of a pump, drives and gearbox (three speeds - two forward and one back). In order for the machine to move, you need to move the lever. The further the lever will be moved, the faster the combine is going.
The combine braking system is also simple and understandable. It consists of cylinders, a tank with brake fluid, brake shoes And of course, pedals. There is a mechanical parking brake, which is included with a special pedal.
Optional equipment.
Perhaps the most strong side American combine. John Deere company produces a huge set additional equipmentwhich is intended for the cleaning of all existing plant crops.
If necessary, you can purchase wheels different size and install off-road tires.
The advantages and disadvantages of the combine of John Deere 9500.
The strong parties of this American technology are:
- Accessibility and low cost of spare parts. The cost of spare parts for John Deere 9500 is relatively small. It suffices to say that the price of them is an order of magnitude lower than the cost of similar European combines. In addition, the American company has the highest quality of service. The necessary spare parts are brought over a couple of weeks and deliver at the place of order.
- Simple I. reliable motor. Diesel american Engine It has a simple and reliable design. It is suitable for Russian diesel fuelAnd it will be faithful to serve for several years without any maintenance.
- High performance. Huge volume of grain bunker, spacious fuel tank, Giant straw-stroke - all this allows you to achieve excellent performance. The American combine is 2-3 times more productive than the best domestic samples.
- Adaptability. Due to the unique computer system, the agricultural machine is perfectly adapted to domestic realities. It perfectly behaves in our climate and is able to work at the crossed terrain.
- Countor Master System. A specially designed system that allows you to accurately repeat all the irregularities of the field, and allows you to work at any time of the day. Also, the system allows you to work with wheat of any size and collect even fallen spikes.
- Hillmaster system. The computer-hardware complex does not allow the combine to turn over even the coolest slopes. It is possible to work even in the mountainous area.
- AME system. Electronic control, a kind of autopilot that allows you to automate all the actions of the combiner. Reduces the human factor to a minimum, and allows you to control the whole technological process Cleaning grain crops.
- Comfortable workplace. The combiner is in a very spacious cabin with a soft chair. At its disposal, air conditioning, heater, mini refrigerator and radio tape recorder with FM receiver.
- High speed movement. If necessary, the combine can move at a speed of 30 kilometers per hour. It greatly facilitates the transfer of combines on public roads.
Weaknesses of the American Combine:
- High price. Perhaps the most important drawback of this combine. Its price is several times more expensive Domestic counterparts.
- Factory defects. Some combine models have factory flaws. A particularly large number of defects are allocated combines collected in Austria and Germany. However, such flaws are corrected by the company's service center without any wires.
- Noisy work during throat. Three-power hammer, which works very noisy, and it can bring a lot of inconvenience during the working day.
