Lifan engines (PRC) - high quality and at the same time available analogs of products of the Japanese brand Honda. Their manufacturer Lifan Group Co Ltd. - one of the market leaders motorcycles - Pays special attention New developments. The research activity of the company in the field of mechanical engineering is very successful - approximately 5,000 patents allow you to withstand world competition.
Lifan Motor Engines are universal, available throughout Russia and relatively cheap. Them the lineup It is represented by single-cylinder four-stroke two-, very rare four-valve engines with manual start-up system and electric starter. Cooling - exclusively air. Lifan engine power for garden and economic equipment correlated from 2 to 13 hp depending on the destination.
Lifan gasoline engines are widely used for equipment, motor-cultivators, benzogenerators. Widely used in the production of garden equipment as many domestic producers.
Designations of characters in the name of the engine at Lifan.
Many people ask that they denote the Latin letters used by Lifan in the title of engines. Let's briefly try to consider this question so that you can easily navigate in abbreviations, and not mistaken when choosing a motor.
After the name of the company "Lifan" follows the numbers. This is a series of engine, and it denotes its power. For example, Lifan 152 F is a series of 152 series. Its power is 2.5 horsepower. But for ease of choice on our site, the power of all engines is indicated in brackets at the end of its name. So with this, as a rule, there are no questions from users.
Latin letters follow the number of the series in the title. Let's look at their meanings:
F - denotes that the engine is standard. For example: Lifan 160 F is a standard 160 series engine with manual launch.
D - indicates that an electric starter is installed on the engine. That is, for example, the engine Lifan 160 Fd is the standard 160 series engine with EELCTROME.
R - denotes that the engine is installed with an automatic clutch reduction gear. Example: Lifan 188 F-R This 188 series engine with manual launch (because there is no symbol D) and with a gearbox. So then the designation "Lifan 188 FD-R" is a 188 series engine with an electric and with a gearbox.
L- indicates that the engine has a lowering gearbox without automatic clutch. Example: Lifan 177F-L This is a standard 9 hp The engine with a downhole reducer 1/2, without automatic clutch.
S - denotes that this engine is manufactured in winter design. For example: Lifan 188 FD (S) engine is a 188 series unit with electric, and in winter configuration.
About all additional devicesMounted on engines (such as lighting coils or relays) stated directly in the description to the motor. Therefore, there should be no questions here.
Motors Lifan 168 F2 enjoy well-deserved popular among lovers of small motorcycles. These engines have long been working on various devices - Motoroblocks (Salute, Agat, Neva, Ray, Oka, Cascade, MB-1, MB-2), Motor Cultivators (MC MOD), Benzogenerators, Motor Pompands, Vibroplites, etc.
The four-stroke engine Lifan 168 has high technical specifications. It is a complete copy famous model Honda GX200.
It is very economical on fuel consumption, has a cast-iron cylinder sleeve, easily starts in any climatic conditions.
Automatic revolutions adjustment is installed on the Lifan Engine.
Therefore, Lifan 168F2 uses all known manufacturers of garden and construction motorcycles.
We offer this engine model. internal combustion To install on motor blocks and motor-cultivators instead of the old engine.
Engine scope Lifan 168F-2:
Motoblocks.
Cultivators.
Vibrating plates.
High pressure washers.
Road construction equipment.
Construction equipment.
Specifications
Why buy from us:
Shopping by favorable prices You can not leaving home.
You do not risk losing your money, because Paying the product Making sure that this particular item you need.
At your request, the technique will be checked for performance.
You will receive a complete and competent consultation on the selected product, technical characteristics and tips on use.
When order from 3000 r. shipping cost in Moscow will be all 500 R.. In the Moscow region an additional 30 rubles / km.
Sending orders to other cities of Russia transport companies. Delivery Ot 500 R..
Lifan 168 F-2 engines with a maximum power of 6.5 hp Some of the most popular for installation on motoblocks. Used on motorcycles russian production So from other manufacturers.
Gas engine Lifan 168 F-2 is designed for installation on a small household motorcycle. It is most suitable for installation on cultivators and motoblocks, motorcycles, motor-pumps, generators, snow blowers and other techniques. This model combines durability, efficiency with moderate cost and ease of use. Country of manufacture - China.
According to the statistics of Yandex requests, engines for Lifan motoblocks are leading in their popularity and in demand. At that time, while Honda, Subaru and B & S will argue who is better, Lifan conquers the market in this segment. If you decide to buy a specific model via the online store, you will see that chinese engines Buy and choose easier, as they trade significantly more firms.
For those who have a technique with an outdated engine, an engine for a motoblock Lifan 168F-2 is ideal for re-equipment, with an increased motor. For full re-equipment, it is only necessary to purchase a 2-stream pulley, a platform, belts, a gas cable and a fastener kit.
These engines are ideal for motoblocks presented on Russian market Vecina, Neva, Salute, Favorit, Agat, Cascade, Ugra, Oka, Volga, Ray, Farmer, Patriot. Almost all of the listed manufacturers are equipped with their motoblocks Lifan gasoline engines.
For all Lifan technique, we are granted 2 years warranty - this fact speaks of quite high quality.
Lifan (Lifan) - the official website of dealers in Russia: http://lifan-rf.ru
Official representative of the Lifan plant in Russia - http://www.lifan-moto.ru
Official representative of Lifan in Russia http://lifan-official.ru/4
Technical characteristics of the engine Lifan 168F-2
| Model | 168f. | 168F-2. |
| Dimensions, dhshv, mm | 305x365x335 | 313x376x335 |
| Dry mass, kg | 15 | 16 |
| engine's type | 4-stroke, onv, single-cylinder with inclination 25º | |
| Cylinder volume (see 3) | 163 | 196 |
| Cylinder diameter, piston stroke, mm | 68x45 | 68x54 |
| Maximum theoretical power, kW / rpm | 4.1 (5.5 hp) / 3600 | 4.8 (6.5 hp) / 3600 |
| Recommended power, kW / rpm | 3.4 (4.6 hp) / 3600 | 4 (5.5 hp) / 3600 |
| Max. torque, n m / rpm | 9.0/3000 | 11.0/3000 |
| Fuel consumption, g / kW h | 394 | 394 |
| Cooling system | Forced air cooling | |
| Ignition system | Non-Transistor (TC1) | |
| Spark plug type | Brr6es (NGK), NHSP LD 6RTCU173F | |
| The direction of movement of the crankshaft | Counterclock-wise | |
| Adjustable parameters: Spark plug clearance Idling Valve Gap (Cold Engine) |
0.7-0.8 mm 1700 ± 150 o6. / min Intake: 0.15 ± 0.02 mm Issue: 0.20 ± 0.02 mm |
|
| Running | manual | |
| Fuel tank capacity: | 3.6 L. | |
| Engine oil volume: | 0.6 L. | |
| Recommended Oil | SAE - 30 Summer, SAE - 10W - 30 All-season (for modifications with gearbox the same oil is used) | |
| Fuel | Neeterized gasoline with octane number of at least 92 | |
| Nearest Analogues | Honda GX-200, CHAMPION CH200K / G200F | |
All engines from the series Lifan 6.5 l C (in the series included Lifan 168F-2, 168F-2R, 168FD-2R) Equipped with an automatic decompressor and oil level sensor. The decompressor is used to reduce the effort when starting the engine, and the sensor is used in the engine lock system when the oil level is reduced below the norm.
Chart of dependence and torque from engine speed
From the schedule we see that the optimal modes of operation of the engine in the area of \u200b\u200b2500 rpm
Which oil to fill in the engine Lifan 168F-2
Most right choice Oil helps to determine the instruction manual for the engine. Here is an excerpt from the instructions:
Oil is a key factor that provides engine operation. Do not use butter with additives and oil for 2 tracked Enginebecause They do not contain enough lubrication, which reduces the service life of the engine.
Check the engine by setting it on the horizontal surface
Recommended Oil: SAE - 30 Summer, SAE - 10W - 30 All-season (see Fig.) Since the viscosity varies depending on the temperature and region, the lubricant should be selected in accordance with our recommendations. See fig.
1. Install the engine on the horizontal surface.
2. Remove the dipstick and wipe it.
3. Insert the dipstick in the neck of the oil curtain, without spinning the lid, and measure the oil level.
4. If the oil level is low, the result of recommended engine oil.
5. Insert the probe to the place.
Engine equipment System for monitoring the amount of oil (oil sensor)
The oil control system is designed to prevent engine damage due to insufficient amount of oil in the crankcase. When the oil level becomes insufficient, the oil control system will automatically stop the engine, preventing damage, while the engine switch remains in the "ON" position.
Oil sensor function
Oil sensor is an element of a system that blocks the engine when the oil level decreases below a certain limit. Engine lock is needed:
- under the support or coup of the vehicle.
- Lifan engines are installed as driven not only in vehicles, but also generators. Generators, as a rule, are stationary mechanisms for long-term tracking, they are not required. Therefore, in the event that something happens with the generator oil during operation, the blocking system will avoid damage.
Fuel
Neeterized gasoline is used with an octane number of at least 92. The use of unleaded gasoline reduces the formation of a car and extends the service life of the engine. Never use a crude gasoline or a mixture of gasoline and oil. The fuel should not be dirt and water. Installed Japanese carburetor. The engine works steadily even on low quality gasoline.
If you decide to use gasoline containing alcohol (benzospirt), make sure that octane number Not lower than recommended. There are two types of benzospirt: one - containing ethanol, the other is methanol. The ethanol content should not exceed 10%, and methanol - 5%. If methanol in a mixture is more than 5%, it can reduce the efficiency of the engine operation, and, in addition, damage parts from metal, rubber and plastics.
It is possible to purchase a certified gas module, which makes the engine two-fuel gas - gasoline. In this case, the guarantee from the manufacturer is preserved.
Recommended spark plugs: BP6ES, BPR6ES (NGK) or NHSPLD F7RTCU. Cleaning candles guarantees normal work Engine and what around the candle will not appear in Nagara. Measure the gap of the candle with the help of the probe. The gap should be from 0.7 to 0.8 mm. Adjust the distance bending the side electrode.
Check that the candle washer is in good conditionReplace it if necessary. Screw the candle with your hand until you stop, and then tighten it using a special key. When you install a new candle, for pressing the washers, tighten it another 1/2 turn. If you install a candle that has already used, tighten it to 1/8-1 / 4 turns.
A WARNING
Candle must be carefully installed and pressed. Insufficiently pressing candle can greatly warm up and damage the engine.
Use only recommended candles and similar. Incorrect the temperature range of the candle can damage the engine. Wash the candle carefully, so as not to break the thread in the cylinder block.
An important feature of the engine is that it is unified with many similar motors and mounting the installation platform coincides, which does not cause difficulties when replacing the engine. Frequently mentioned the fact that Lifan is a copy of Honda (even sometimes licensed) - but it does not correspond to reality. This information is voiced by Honda representatives.
Mounting engine sizes for Lifan 168F-2 motoblock:
Varieties of Lifan 168F-2 engines
Various delivery options are different:
- diameter and type of output shaft
- view and type of gearbox (1/2, 1/6, chain, gear, with automatic centrifugal clutch)
- the presence of electric starter and lighting coil
Lifan 168F-2 Force aggregate It has a conical outlet of the shaft, differs from the base model only by the conical switching of the crankshaft sock, which provides a more accurate and tight fit of the pulleys.
Lifan 168F-2L This engine has a built-in lowering gearbox with a landing diameter of the output shaft 22 mm
What does the engine reduced gearbox need
Reduces the rotation speed of the shaft of the engines, as if there is a gearbox - 1800 rpm, without a gearbox - 3600 rpm
- It is important to understand that the lowering gearbox does not increase the engine power, but increases its torque with a decrease in its rotation speed. Thus, the rated power of the engine remains almost unchanged.
Lifan168F-2R motor is also equipped with a downward gearbox, but with automatic centrifugal clutch, and the size of the secretion of the secondary shaft of the gearbox is 20 mm.
Lifan 168Fd-2R 7A The most expensive engine variant is different not only to 22 mm with a diameter of the output shaft of the gearbox, but also the presence of an electric starter. In this case, the rectifier required to charge the battery is not included in the package.
We give examples of motors modifications:
Lifan engines labeling
The name of the brand there is a series of engine, which is denoted by the corresponding numbers and letters, you can determine the power measured in horse poweroh:
1. Gasoline engines:
152 - 2.5 l / s;
- 160 - 4 l / s;
- 168 - 5.5 l / s;
- 168-2 - 6.5 l / s;
- 170 - 7 l / s;
- 173 - 8 l / s;
- 177 - 9 l / s;
- 182 - 11 l / s;
- 188 - 13 l / s;
- 190 - 15 l / s;
- 192 - 17 l / s;
- 2V78F-2 - 24 l / s two-cylinder;
- 1p60 - 4 l / s vertical shaft
- 1p64 - 5 l / s vertical shaft
- 1p70 - 6 l / s vertical shaft
2. Diesel engines:
C178 - 6 l / s;
- C186 - 10 l / s;
- C188 - 13 l / s.
The number of the series in the name is the Latin letters, their values \u200b\u200bare as follows:
F - Standard Engine. Example: Lifan 168 F is a 168 series motor in standard equipment With the usual manual launch.
D - the designation of the electric starter. Example: Lifan 168 FD - engine 168 series with manual and electric starter.
R is the designation of a lowering chain gearbox with centrifugal clutch. Example: Lifan 168 F-R is a 680 series motor with a manual launch, chain gearbox and centrifugal clutch. No symbol D indicates manual start. Lifan 168 FD-R - electrical launch, chain reduced gearbox and centrifugal clutch. Centrifugal clutch - This is the rotation of the shaft with increasing revolutions. The more you give gas, the stronger the rumble.
L - The engine is located gear gear. Example: Lifan 168 F-L is a 168 series motor with a installed gear gear that reduces standard revolutions.
S - Motor is designed for use at low temperatures, the perfect option for winter. For example: Lifan 188 FD (S) engine is a 188 series unit with electromasic, in winter configuration.
H - the engine is installed with a chain gearbox. Example: Lifan 168 Fh is a 168 series motor with a installed chain gearbox that downgrads the standard revolutions.
V - vertical engine crankshaft. Example 1P 54FV - 1P 54 - Engine Series, F - Standard Manual Start, V - Vertical Shaft.
C is an engine operating on diesel fuel.
In some cases, in the labeling of Lifan engines, in particular the 168 series, you can see the letter B., eg Lifan 168F-2B. Availability in the title of this letter means that appearance (Design) The engine is changed.
Lifan engines color can change upon request of the supply organization of the corporation LIFAN INDUSTRY GROUP CO. Ltd. (Clamp: Provided that the motor batch will be over 1100 pcs.).
Engine Lifan 169 F2 Video Overview
Heavy and powerful carburetor Engine Lifan 168 F-2 (GX-200) is excellent for use in the garden and gardening equipment of the professional and semi-professional level. Such an aggregate can be easily found on motor blocks, cultivators, generators or motor-pumps. The Lifan 168 F-2 gasoline engine (GX-200) is a four-stroke single-cylinder internal combustion engine with a vertical knead location. This design provides compact sizes of the unit and simplicity in the installation, which allows you to use it on a wide range of various equipment. For a simpler installation, you can use a special transition platform. Starting the engine is carried out using a starting cable, thanks to an effective ignition system and improved carburetor design, the engine easily starts even in bad weather. Cooling system - air, passive. It provides an acceptable efficiency indicator while maintaining a small weight. With the volume of the cylinder in 196 cubic centimeters and a capacity of 6.5 horsepower Motor weighs only 13.8 kilograms, therefore it can be used on the chassis of the mid-level. The capacity of the fuel tank is 3.6 liters, this is sufficient for the continuous continuous operation of the unit, if we consider that it has a rather small consumption. The engine runs on gasoline AI-92, lubricant material serves usual motor oil. Non-transistor ignition works without failures and can work out for many years. Lifan 168 F-2 gasoline engine (GX-200) is characterized by good balance and effective system noise reduction, because his work is not accompanied by loud noise or strong vibration. The power unit is carefully adjusted at the factory, because after installation requires a minimum of clockwork. The engine is accompanied by a detailed instruction in Russian, in which all necessary information Service.
Benefits Lifan 168F engine (DBG-6.5):
4th stroke engine
-Nag electronic.
-System launch manual start.
- easy start system decompression.
-Productable design Light weight and dimensions.
- Dental of the oil level of the oil in the crankcase, if necessary, turns the ignition circuit.
- Material quality materials, manufacturing accuracy
-Chong sleeve cylinder
- Double filter element.
-Gorizontal location of the crankshaft.
