Unreasonable replacement Nissan Cascai's salon filter leads to a worsening of the stove work, increases consumption and negatively affects the health of the driver and passengers. Step-by-step instructions will help to correctly replace without a hundred.
The cabin filter cleans the air from dust and unpleasant odors from the street. Thanks to his work, fresh and clean air comes into the car's salon. Replacing the cabin filter to Nissan Casca with her own hands does not cause problems - you can do everything yourself and without a pit. The main thing is to know how to remove the old filter element correctly.
Replacement frequency
There is no accurate answer to the question after how many km mileage is not to change the filter. Depends on the operating conditions of the car. In Manual Nissan Qashqai. Recommended replacement period of 30,000 mileage kilometers.
Specialists advise you to change the salon filters at least twice a year or with the beginning of the new pore of the year.
Signs of unfortunate
- Unpleasant smell in the cabin. Dirty salon filter May be covered with mold. This smell will be impossible to weaken out of the cabin.
- Worsening the operation of heating, air conditioning and ventilation systems. The stove simply ceases to blow with the former force.
- Raising fuel consumption.
- Dust flies in the cabin. So it does not settle in the filter and goes into the salon.
The dirty cabin filter accelerates wear of air conditioning and car heating systems.
The clogged cabin filter is a seatingman of microbes and diseases. Timely replacement Savings car systems from expensive repair, retains the health of car owners.
Instruments
It will take a flat and crucible pumping, a portable light source, a new filter, a wet rag. It is desirable to have a vacuum cleaner to remove dust from the compartment before installing the new cabin filter.
Where is
On the village it is located on the side of the driver's seat to the right of the accelerator pedal.
Step-by-step instruction
The process of replacing the salon cart on the village in steps:
- Find a plastic tunnel plastic lining. From the left edge of the lining to remove 4 clips and gently pull the lining in your side.
- Enable blowing windshield and put the maximum temperature.
- Unscrew the crosac dumplings 2 fastening bolts and remove the control unit.
- Remove the filter cover.
- Get an old filter.
- Fold a new fold filter to crease, like a harmonic.
- Collect design in reverse order.
After installation, press the filter in different places so that it turns out in the compartment.
The Regulation is Nissan, the replacement of the cabin filter on Qasqai J11 is not provided for every scheduled maintenance. However, during operation russian roadsFor the period specified in the regulations, the cabin filter is strongly clogged and does not fulfill its functions. We recommend replacing the salon filter to Nissan Cascai J11 every 8-10 thousand km of run.
What filter to choose to replace
From the factory, the original filter is the price of it from 600 rubles. In addition to original filter You can install the filter analogues of Chinese, Russian or European manufacturers. When choosing a filter, you should pay attention not only to the brand, but also on the cost of the filter. Too cheap filters are coping with the air purification task.
Filter analogs 27277-4bu0a.
- Alco Filters MS6477 from 350 rub
- Filtron k 1355 from 180 rubles
- Fortech FS148 from 160 rubles
- Fortech FS148C Coal from 300 rubles
- FRAM CF-11854 from 300 rubles
- Goodwill AG4221CF from 250 rubles
- JS Asakashi AC2513 from 290 rubles
- Sakura CA18360 from 360 rubles
- TSN 97882 Coal from 350 rub
For Nissan Qasqai. J11 Salon filters are offered both coal and ordinary. Their differences are that the coal filter is better filtered by air and smells entered into the salon, however, its value is higher compared to conventional filters.
Instructions for replacing the cabin filter
By itself, the filter replacement will not cause special problems even from novice car owners. On Nissan Qasqai J11, you can replace the cabin filter in two ways - the first is without removing the glove box (underworked) box, the second method with the removal of the glove box. When replacing the filter, the first way will have to work hard to remove so as to remove the filter housing cover and get the filter itself. The second method in this regard is much easier.
Replacing the filter with the removal of the glove
Disconnect from the glove box "Microlift" as shown in the photo
We unscrew 5 fastening bolts - 3 outside and 2 inside, disconnect the backlight wire and pull out the glove box from the landing place.
The photo shows the location of the filter. Open the filter housing cover and get the old filter element.
Before installing a new, clean the body from dust and the possibility of leaves and the new filter being installed.
So that the filter "got up" exactly, it must be bent a little and insert evenly into the housing so that it goes smoothly and dealt in the case itself. If the filter is mounted crookedly, the flow of incoming air will be lower.
Replacing the filter without removing the glove
On the Russian assembly Crossover, you will need to unscrew the screws of the filter housing cover and only then click on the retainer and pull the lid.
So, we climb your hand under the glove box and unscrew the using the TORX 20 sprocket with the sprocket, which holds the cover.
Click on the retainer and remove the filter housing cover. Before us is visible cabin filter.
Gently take it out, we clean the case from dust and garbage, and set a new filter.
- In order for the air in the cabin is always clean regularly replace the cabin filter.
- If the heater is bad in winter time, there was a fogging of side glasses or windshield - it is possible to clog the cabin filter.
- In the cabin enters a weak flow of air from the air conditioner? It is possible that it is in the salon filter, since the air flows extremely bad through the scored filter.
Modern cars can boast not only magnificent side qualities and an innovative design, but also a high degree of comfort. It is largely ensured by a hermetic salon. The air goes through the filter element, which protects the driver and passengers from dust, small garbage and insects. Over time, the cleansing element is contaminated and stops performing its functions. In the car it becomes difficult to breathe. To eliminate discomfort, you may need to replace the salon filter Nissan Casca.
Independent replacement
The cabin filter changes after the car drove about twenty or twenty-five thousand kilometers. Models of Nissan Cascai, which were released in 2008, 2011, 2012, have a similar algorithm for replacing the salon filter. It does not differ in this process in cars 2013, 2014, 2015.
Sequencing:
- The plastic panel is moved to the "tidy", the fastening clips are cleaned, and the panel is shifted to the side, thereby bargaining the flap connectors.
- These connectors need to be disconnected, after that the control unit is removed. It is worth noting that it is attached to two bolts.
- The cabin filter cover will be interpreted when replaced, so it needs to be dismantled.
- The element for air purification is pulled out of the "groove", a new one is inserted into its place. In order to freely implement this operation, it must be pre-collapsed by the "accordion".
On Nissan Casca, the replacement of the cabin filter is carried out for 30-60 minutes. Of course, to carry out this operation, you can take a car to the service center, but besides extra financial, as well as temporary costs, this step will not bring anything.
So, before changing the cabin filter, it is necessary to study video and text information about the replacement nuances on the nasha. Before carrying out this operation, it is worth examining the nuances of the interconnect filter replacement process different modelsFor example, on Nissan Qashqai models 2.0 and J11.
In order to successfully change the filter on Nissan Kashkai with her own hands, it is necessary to carry out all the operations extremely and neatly, since any careless action can lead to more serious breakdowns.
Replacing the salon filter on Nissan Cascai is a simple operation that is subject to absolutely every motorist. It is important to remember where the element cleansing air is located. The regular resource of the Nissan salon filter is about twenty thousand kilometers of the rally. After the expiration of this period, the old air filtering element should be changed to the new one. The new filter salon, standing on the spot being replaced, will more effectively carry out its functions.
How to choose a consumable?
Before buying the air cleansing element, drivers may occur specific question: "What filter to put: coal or ordinary?"
Of course, a coal is more efficient, thanks to the use of activated carbon in its design, which has been processed in a special way.
He can protect the cabin auto not only from dust and dirt, but also from unpleasant odors as well harmful substances. The usual such "functionality" can not boast. However, the coal consumption is an order of magnitude more expensive.
Conclusion
Replacing the cabin filter in Nissan Qashqai - the process is simple. Every driver knows where it is located, and the video in the network will help to deal with the dismantling and installation of a new consumator. When it is elected, it is important to pay attention to the country where the product has been produced, the company that has released an element for cleaning air in the cabin of the car, as well as on the design of the packaging and appearance Details (there should not be chips and scuffs). If there are any external imperfections, then most likely it is a fake, and it should be discarded from the purchase.
With an increase in the number of cars on the roads and with the deterioration of the environmental situation in the city, the maintenance of motorists is very relevant. The concentration of harmful gases in the environment near the roads exceeds the permissible limits several times. To purify the air supplied to the car interior, salon filters are served. The salon filter enters the ventilation system and car heating.
Device and Functions of the Nissan Salon Filter
The cabin filter of the NISSAN brand car consists of a filtering material that is installed in the filter unit of the car heating system. In older models, the filter element was framed into the plastic frame.
The main functions of the cabin filter of the car are:
- cleaning the air from environmental Inside the car from solid particles (dust particles, soot, pollen plants, etc.)
- reducing the concentration of harmful gases, adversely affecting the human body (nitrogen oxides)
- cleansing the incoming air from microorganisms.
- protection of the vehicle air conditioner from sticking the dirt and dust, which in turn affects its overall operation of the air conditioner in general.
Modern car filters installed in the Nissan Japanese brand cars are divided into two types.
1. The first type includes simple filters.which exempt the air from mechanical impurities. A porous multilayer composite material is used as the filtering elements, which effectively counteracts the mechanical particles to the interior salon. The composition of the composite includes filter paper and synthetic fibers. In order to increase the filter resource and an increase in the area of \u200b\u200bthe filter element, it is made corrugated. However, it is not enough to combat harmful gases of a simple filtering material.
2. To clean from harmful gases, salon coal type filters are used. In such filters, in addition to synthetic fibers, the particles of activated carbon are used. The free ions of activated carbon react with molecules of nitrogen oxides and carbon attracting them to themselves, thus reducing their overall concentration. Also activated carbon disinfects the cabin air from microorganisms. The disadvantages of activated carbon filters are its significant cost when compared with simple.
When it is necessary to replace the cabin filter on Nissan cars
The most important and obvious signs for replacing the salon filter are:
- The smell of dust and gary
This effect manifests itself with a decrease in the bandwidth of the filtering material and, accordingly, the effectiveness of its operation. If a carbon filter is used in the car, the concentration of free activated carbon ions is dramatically reduced. It should be noted that when the activated carbon particles are drying, the filter begins to work as simple.
- Bad work stove
The cabin filter is part of the car body heating system and is located on the outlet of the stove fan. In the process of operation, the filter element is saturated with dust particles and dirt, which reduces the flow of air, pumpable by the fan.
- Moving car glass
The fogging of glasses is a consequence of a decrease in the performance of the stove and its bad work. One of the reasons for bad operation of the salon heater is a clogged filter.
In accordance with technical Regulations works by maintenance cars Nissan., Salon filter change must be made every 10 thousand km of run or at the next.
Popular problems with Nissan Salon Filter
On most model Row Nissan brand cars, the salon filter is behind the glove compartment. When replacing the filter, you must first remove the globe cover, and then remove the plastic overlay, separating the filter block from the glove box, unscrew the fastening screws.
On some models of Nissan cars, you can encounter some difficulties when replacing the cabin filter.
1. On models Nissan Teana.
To get to the filter block, in addition to removing the glove cover, you must remove the entire cavity of the glove box. 
2. For owners of model cars a number of Nissan. X-Trail and Nissan Qashqai The filter change procedure is somewhat more complicated, since the stove and fan with the filter block are located under the central car console.
As can be seen from the images presented, an increase in the complexity of work is associated with the removal of the gas pedal node. For marks Nissan X-Trail With the right steering wheel, a pedal node is not needed to shift the cabin filter.
