Installation for automatic bushing of buses. Washing buses of WRC project organization that with the development of a post of current repair of cars in agricultural enterprises

Installation is designed for washing outdoor vertical and horizontal surfaces. truck vehicles, buses, trolley buses and trams.
Installation operation is allowed in a closed room with a temperature ambient from +1 to +40 ° C.

Semi-automatic Washing Installation PMU-1 (PSK) with a horizontal brush

Stationary washing installation PMA - 1 Designed for surface washing of heavy trucks, buses. The sink consists of four vertical brushes and one horizontal brush. Brushes are mounted in a durable frame made of welded profile pipelines. Vertical brushes carry out a mechanized sink of side surfaces. Horizontal - flushing the front, rear and upper parts of vehicles. The rotation of the dual brushes is carried out in different directions, which allows rinse the surface in hard-to-reach places. The brush consists of a brush pipe and the screws attached to it, easily replaced brush elements with a length of 295 mm, 100 mm wide. Installation management performs one operator from the control panel.

Performance - 6 cars per hour.

Semi-automatic washing installation of buses and trolleybuses PMU-A / T-7 (PSK)

Installation is designed for mechanized washing Outdoor, vertical surfaces of trolley buses and wagon buses.
Operation of the installation is allowed in a closed room with an ambient temperature from 1 to 40 ° C.

The semi-automatic washing of trolleybuses works in conjunction with the conveyor. The conveyor is designed to ensure uniform movement of trolleybus in the process of washing at a speed of 7.6 m / min. Operation of the conveyor is allowed in a closed room at positive ambient temperatures. Operation on the conveyor: Source position - Driver-distiller trolley buses enter the washing room and stops trolleybus in the first zone at the level of the first columns moaked aggregates (stand on the left and right) on the front wall of the trolleybus. Disable brakes. Trolleybus washer operator includes the "Start" button on the control panel, while the water, brushes and conveyor are sequentially included. The automatic mode of washing trolleybus in the 2nd zone is carried out. When the pushing roller is driving into the floor of the conveyor, the automatic cycle of the trolleybus washing ends - 3 zone. Trolleybus goes from the conveyor in the zone 4 for the burden of inaccessible places.

Portal Washing (PSK)

Description:

The installation consists of the following parts:

• The contour of the preliminary wizard of the front, side, rear parts vehicle And the bottoms with wheels:
  The outline consists of 2 vertical racks, a height of 4.5 m with high-pressure nozzles with fan spraying and lower horizontal installation of the bottom and wheels.
  The pipe wiring represents a single contour from pipes 20mm with nozzles installed on it for washing vertical surfaces and the bottom of the vehicle.
  The pressure of 26-30 bar with a total water consumption of 250 l / min, provides a vertical multistage pump with a power of 15kW XVM series production "ESPA".
• The circuit of applying a detergent solution on the front, side and rear parts of the vehicle. The outline consists of 2 vertical racks, a height of 4.5 m with nozzles for applying a detergent solution. The operation of the contour provides the horizontal pump K20 / 30 4kW.
• The outline of the final wizard is identical to the contour of the preliminary reconstruction.
• Control panel for operation in automatic and manual modes.

The location of the contours of the attached scheme.

The setting also includes 2 5m3 polyethylene tank for clean water, and 2m3 for detergent solution. Automatic tank filler water supply valves provide float valves.
The contour of the pre-wizard and the outline of the final wash work from one pump and the tank.
Switching is carried out by an electroclap automatically.

The principle of operation of the sink is as follows:

The vehicle drives up to the installation, for 2m runs on the pedal log, the red light light turns on on the left vertical rack, the vehicle stops. Pumps are included and the contours of the pre-wizard and the application of the detergent solution are started. After 10-15 seconds light up green light, the vehicle begins to move with a minimum speed through these 2 contours.
Without reaching 2m to the contour of the final wrap, the vehicle runs the wheel to the pedal log, the red light light on the left side of the circuit lights up, the pumps of the first two circuits are disconnected, the vehicle stops. After 4 minutes, the green light lights up, the high pressure pump is turned on, the vehicle is starting to move and drives the contour at the minimum speed.

Technological cargo washing - Makes it possible to remove dirt remnants from the car before conducting a diagnostic examination or maintenance. Made without the use of any chemistry. The main assistant is AVD (high pressure apparatus), allowing a high-pressure water jet to knock down the dirt from wheels, body and cabins of a passenger car or truck. By time, this procedure takes from 15 to 40 minutes, depending on pollution.

Contactless cargo washing - AND special compositions that form an active cleansing foam are used. The pneumatic sprayer inflicts a layer of such a substance and cleansing the contaminants due to chemical processes. It is worth noting that the properly selected composition of the foam is safe for LCP and structural elements of the car. The time of this washing is from 25 to 50 minutes.

In addition to the cargo sink, we have the opportunity to give a primordial view and a passenger car. Washing dimensions, as well as high pressure devices, calculated on trucks allow you to maintain sedans and hatchbacks faster and better than on ordinary sinks. To any client, a convenient expectation zone in which there is a coffee machine and the ability to charge the phone. We regularly track the market and guarantee the optimal price for your car washing. Come and see for yourself!

Cargo sink services for passenger cars

"It tries not only to maintain the highest level of services, but also to constantly expand their list. Along with the sink of passenger cars, dry cleaning salon and car wash "Megapolis M" offers its customers a service associated with a sink of buses. After all, neat and tidy appearance The bus is the face of the carrier. Among other things, the periodic washing of such a large transport allows you to save the good performance of nodes and units as long as possible, because a significant amount of dirt accumulates, and thanks to the timely washing, you can reduce costs for costly repairs.

Buses at Megapolis M stations - a fully automated complex of work, during which not only high-level equipment is used, but also a number newest technologiesas well as foaming means. During the washing of buses is cleared of contamination not only the vehicle body, but also cleaning, dry cleaning and salon washing. So, passengers such buses do not have to doubt the high quality of the services provided by the carrier if they are in the sparkling cleanliness of the cabin.

On the car's houses of Megapolis M, it is possible to clean even the most hard-to-reach places of the engine and the bottom of the engine and the bottom of the engine and the bottom of the engine and the bottoms, while you should not fear any damage to paintwork. Due to the fact that the square of the Meshopolis M car washes is large enough, you do not have to languish in the queues and long wait for the end of work. It will be performed not only very high quality, but also quite quickly. On average, the bus washing will take about 20 minutes. First, a transport foam will be applied to it, which is designed to soften pollution, then it will be melted with a stream of high power water, and then a solution of polymer wax will be applied.

Employees of Maker "Megapolis M" are professionals of their case, so any bus will be washed as much as possible and quickly. If you want your buses to be the perfect reflection of your transport company, Choose the car wash "Megapolis M", and then your customers will never doubt the high quality of your work. And Megapolis M employees, in turn, will make every effort so that your buses are pleasantly surprised and pleased your customers with your neat appearance.

archive

Sink of large-sized transport and manipulators

Recently, the number of specialized sinks for large-tonnant trucks Continuously grows.

Washing tilt trucks

With the modern development of machine-made services to provide cleanliness a passenger car It is not difficult, but the washing of tilt trucks, as well as another heavy truck and large equipmentAs long as the difficult task is.

The procedure for washing tank trucks

The complexity of the tank washing process is that obsolete methods for cleaning tanks with hot steam are quite expensive and long-term (large amount of water, considerable consumption of electricity, several swap cycles, etc.).

The purpose of this diploma project is to redevelop the maintenance plot at Jubilee-Agro JSC Buda-Koshelievsky district, which will ensure an increase in the efficiency of the use of machines ...