The radiator refers to the detail of your car, which not only helps to keep the engine in good health, cooling it on time, but also performs the function of the "dust collector". The design of the car is arranged in such a way that ahead of the radiator collects all dirtwhich is found on your following ways. All would be good, that's just in addition to external contamination, the details, internal contamination and contamination occurs, and if you completely score to clean the unit, then this is already Fatal. The result of similar inattention and improper operation is always one - expensive engine repair.
Timely cleaning of the radiator is the key to the durable operation of the car engine.
Flushing of the radiator is made with a preventive purpose once a year: It helps to eliminate the standard cause of overheating of the engine. This is a leaky, in the technological sense, the procedure in which anyone will analyze independently.
Remember that your radiator requires a systematic autoban as dirty: ignore it is more expensive.
Radiator cleaning agents
To rinse this important detail yourself, it is necessary to have elementary desire and time: the wash process is performed for a maximum of hours. Also does not prevent in advance to find out which gadgets you need for this. In the process of cleansing the radiator with their own hands motorists usually use the following components and tools:
With distilled water and antifreeze, you can easily get rid of contamination on the device.
- antifreeze;
- ordinary distilled water;
- special cleaning substance;
- any working gloves;
- bucket or other drainage tank;
- rubber tube;
- brush;
- large basin with soapy water;
- waste containers;
- safety glasses;
- different rags;
- screwdrivers and wrenches.
Note: Distilled water can always be replaced by -37 ° C "non-freeza".
Another exclusive - cocolaLocated as a great laser of Russian toilets, or lemon acid, which, together with water, fall asleep into the cooling system and drive on the engine, which worked for some time, that is, on an out-of-way engine.
So that the wash procedure has passed successfully, the professional motorist usually applies a more or less soft auto chemistry, the value of which is mainly depends on the harness of the manufacturer.
Come one day in the parking lot and discover what? What to do in such a situation and where to go? Read more about this further.
Do you want to buy a car yourself? Find out how to independently perform diagnostics and what to pay attention to when buying.
Step-by-step radiator cleaning
For high-quality and stable radiator functioning it should be flushing, both outside the unit and inside, and, in particular, from the inside! In principle, the only condition of the good autoban is the presence of hands growing from the right place, as well as attentiveness and caution when performing all actions.
My outside
Most experts recommend that the procedure of "ablution" together with the disassembly, that is, dismantling, although the cleaning of the car's radiator without removal is also possible, especially if there is no time for complete "wash". And most of the modern motorists really not so much.
How to clean the radiator without disassembly? High-quality cooling engine is synonymous with security. Damage to the radiator, first of all, will affect the engine. And it can be damaged with ease: it is enough to give more pressure when washing or keeping the desired distance, and a soft, unstable radiator grid will make you a handle.
The purification of the cooler consists of two important steps: washing outside and from the inside.
Cleaning the radiator ferry or water pressure is made with special attention. Try not to harm the integrity of the scaly surface of the radiator, use the minimum water jet pressure. During the outer washing, the details are not very recommended by chemistry, which includes acidic components, which can also damage the aggregate.
Flushing of radiators without a complete dismantling effectively due to the use of steam.
Any car wash today offers a similar procedure. A powerful jet of hot air is supplied to the plates of the aggregate from the gas generator, which gently blows them, without scratching and deformation. This method is the guarantor of the integrity of all patches and micro seams. The price of such a autoban directly depends on the class class and a specific type of service. On average, you will spend about 30 minutes and 2000 rubles on this gentle procedure.
Cleansing parts with steam - one of the most effective ways Remove contamination.
If there is no money or simply, the toad is stupid, it is possible to rinse the radiator by the ferry, however, for this you will need a large number of compressed air. The obvious plus techniques are economy: no need to spend money on all chemistry and expensive detergents. In time, in the end, it will turn out no more than 20-40 minutes. Since the compressor lives in every garage, instead of couple when washing without installation often use conventional water and painting brushes.
Allows you to get rid of the car from the buzz and extraneous sounds. Look in our article how to perform a shimmer with your own hands.
Each responsible driver must have a complete package of documents with him. And what exactly can I find out.
My inside
Inside automotive radiator, often, accumulates and persistent rust accumulates: new-fashioned antifreeze at the same time do not even help even, despite their lubricating and anti-corrosion effect. What do you need in this case? Of course, to produce inner washing!
So, in front of you there is your car, and you decide to personally dismantle the radiator and rinse it carefully.
- Initially, a fully layer of antifreeze. In the event that the cooling fluid is clean, then simply hold a standard prophylactic flushing, without dismantling. If there is dirt and insane in the liquid, then you have to work hard.
Carefully rinse the radiator can be used by distilled water and ordinary auto chemicals. At the same time, it is unwanted to use, the so-called, anti-vakipin and caustic soda during the washing of the system, because they are able to corrove the metal.
An equally important cleaning process is washing the system from the inside.
- Prevent the engine and leave it in the working status for 20 minutes. Then the layers of all the water with auto chemicals and three times a progress unit clean water.
- Antifreeze in the radiator and without spinning the lid, lay the engine to remove unnecessary air from common system cooling. It's all, now your radiator breathes easily and freely.
The final stage lies in the fill of the new antifreeze into the radiator.
Is it possible to do without internal cleaning? It is not necessary to produce a full-fledged inner washing of the radiator not so regularly, compared with the guidance of an external marafet, which is performed as needed. Therefore, at least once a year to this case it is worth paying attention toIf you really appreciate your car and wish him health.
All parts and components of the machine need a periodic inspection.
Therefore, the internal and external cleaning of the unit is the key to stability in the work of the entire car.
Radiator grille - a kind of mud: everything that passes through it, settles on the radiator. And the radiators in the car can be somewhat - at the indemnial cooler (intercooler), steering hydraulic power steering, conditioner capacitor. The radiator of the engine cooling system is always installed last in the direction of the air flow, it means that it is worse than all blown by the incident air flow. And often precisely because of it, water procedures are underdeveloped. After all, other heat exchangers in contamination only partially lose efficiency, and the engine cooling system is more reminded by a two-position toggle switch: "Works normally" and "Karaul, a boiler!".
The engine radiator is contaminated not only outside, rust and scale particles often accumulate in its tanks, as well as aluminum parts oxidation products. And if you thought about washing the radiator outside, it makes sense to combine it with the replacement of the coolant. All cars for the replacement of fluid from all cars are different, but, believe the experience, with a mileage of 80-90 thousand kilometers to update it does not prevent it.
Consider ways of cleaning radiators. We will act, how did the fathers of dialectics bequeathed, from simple to complex.
As easy as pie
The easiest thing is from - they have one radiator. It is possible to rinse it yourself, and not even removing from the car. For example, from the hose in the country. Or bothering the sink. The water pressure should not be powerful so that thin heat sink plates will not be brought. If this happens, the radiator almost ceases to pass through itself air and, accordingly, cannot effectively cool the liquid.
Before water procedures, it is desirable to install a plastic film screen behind the radiator: it blocks the path of water and dirt flying on drive belt, generator and candles. At the same time, it is important not to pour the fan electric motor. He is not afraid of splashes, but should not be directed directly on him under pressure.
In company
If the engine cooling radiator is installed in the package with other radiators, its flushing without dismantling is unlikely to give the desired result. The fact is that the jet after washing the first heat exchanger inevitably loses its strength - and the effective cleaning of the second radiator will not work. In this case, you can try to wash radiators from different sides: the condenser - with an outer, and the radiator of the cooling system is internal. But according to the experience I know that there is sometimes something like a felt blanket from a poplar floss between two heat exchangers from a poplar fluff and other materials. Sometimes it is possible to get rid of small blood by dismantling the radiator grille (on those cars where it is removed separately from the bumper). It will give the opportunity to wash the heat exchangers without. And then, tilting the engine cooling radiator and disconnecting it upper fasteners, Clean the space between the radiators.
The most difficult but most effective method Clear the engine radiator - to completely dismantle it. To do this, you will have to disconnect and remove the electric fan assembly with the casing, as well as disconnect the heat exchangers of the engine and air conditioning. The conditioner capacitor is more difficult with the condenser: after dismantling, you will have to register the refrigerant system again. Therefore, the capacitor is trying to simply fall aside and flushing, going around without depressurization of the air conditioning system. At the same time, the removal of the engine radiator recommended to be cleaned not only outside, but also inside. For one hundred percent success, it is necessary to drain the cooling fluid from the system and rinse with clean water all the cooling contours. This will increase the efficiency of the heater, since the dirt accumulates in its heat exchanger.
For different machines The cooling system radiator extraction method is different. In most cases, it is necessary to remove front bumper and a radiator grille, as well as dismantle the engine protection or plastic mudguards. Some cars under the bumper there is a beam-amplifier, which is welded to the front ends of the spars, which complicates access to radiators. In others, it can be dismantled, unscrewing only a few bolts, which facilitates access to heat exchangers.
If you do not decide to wash the radiator on your own, you can trust this work by professionals. In this case, the officials will act on the full program - with the removal of the radiator, but the amount will be asked considerable. For example, the owner of the mid-sized crossover in Moscow will have to pay around 12 thousand rubles.
Unofficial services specializing in vehicles of one brand usually evaluate their services somewhat lower. More affordable offers of garage masters, but quality is often appropriate. Wash on the car wash Shot Radiator will cost 100-300 rubles.
The radiator in the car is so arranged with the structure, it is ahead, supports the desired temperature of the coolant, and at the same time collects all dirt and dust, occurring on the road.
In addition to contamination, entering outside, there is also internal pollution. For normal work The entire engine requires washing of the car radiator from time to time. This is a relatively simple work in the work plan, so you can make it yourself.
Why need to be cleaned and rinse the radiator
Cleaning the radiator must be carried out systematically. Car radiator is needed for cooling the engine. threatens irreparable results: it may be necessary to replace the engine, overhaul And rather big material costs. To avoid all this, it is possible to rinse and clean the radiator on time, and, inside and outside. Time takes a little, and I will remove the problem.
What will take:
- antifreeze (4-8 liters);
- distilled water (can be replaced with -37 ° C coolant);
- radiator washing means;
- pan or bucket for drainage;
- watering hose;
- working gloves;
- soft brush;
- bucket and soap water;
- safety glasses;
- waste containers;
- rags;
- set of screwdrivers and keys.
Clean the radiator from the inside
First of all, you need to make sure that it has cooled. In the hot condition, the liquid is under high pressure, you can burn while working. And filling cold water hurt hot Engine. In order for the cleaning of the car's radiator with his own hands without damage to the cells of the radiator, to do everything correctly, you need to comply with simple rules of work.
Beginning of work
Raise and secure the engine hood, in order to avoid falling. It is important to correctly remove the used cooler. This liquid is toxic, has a slightly sweet smell and therefore attracts children and animals. It is impossible to leave this procedure unattended, or merge waste to land. The container, which is used for waste, will not fall into the kitchen. It should also be easily fit under the car and be wide enough to wash the car's radiator was more convenient.
When the appropriate packaging was found, substitute under the radiator at the valve level.
Remove the radiator lid
The cooling fluid pressure depends on the type of engine and is written on the radiator lid. The lid itself has a spring ring attached between the top and rubber fastening. This spring helps keep pressure. If the spring is easily compressed, it means it is time to replace it. It is also necessary if rust is found on the mount. It is recommended to change the lid every 2 years, together with the washing of the radiator.
It should be remembered that there are different covers for different pressure.
Check hoses and radiator clamps
In the radiator, two hoses: one on the lid, it serves to output hot liquid from the engine. The second below, it serves cold liquid on the motor. To change the hoses, the radiator must be dried and check before work. If the hoses are noticeable leaks or cracks, if there is a rust on the clips, you need to replace them. If the hoses have become soft, it also suggests that it is necessary to replace the hoses, and it is better to replace both.
Remove the cooling fluid
Unscrew the valve must be mandatory in gloves, since the cooler is toxic. The fluid must drag into the receiving capacity under the machine. After that, close the valve and put waste into the prepaid prepaid cooked. Then, to wash the car radiator and, put the tank below the valve.
We wash the radiator
Garden hose fill the radiator with water and pour it completely into the receiving capacity. It must be repeated as long as the water is clean. Water used should also be placed in the container for subsequent disposal.
If the radiator and cooling systems are strongly contaminated, you can use a special cleansing fluid. Fill into the Radiator DetArtrant Radiateur bottle, boot the motor and let it work 15-20 minutes to better distribute the drug over the cooling system. Then you need to clean the system and rinse with water with discharge cranes and the engine turned on.
Change the cooling fluid
An ideal is considered a mixture of antifreeze and water. Use better distilled water, because it is without minerals that can affect the properties of the mixture. In this case, it will not work normally. The desired components are better mixed in a clean container. You can also use the finished coolant. The trading network has such funds as AUTOMAX or ELF.
Most radiators contain liquids of no more than eight liters, so you should decide in advance with its quantity.
Removal of air from the cooling system
It must be removed from the cooling system formed aerial traffic jams. Let the engine with an open radiator, to, for 15 to 20 minutes. Then include a heater at maximum. This will circulate the cooler and the air will gradually disappear through the neck of the radiator. After removing the surplus, the released place should be filled. Topping the required amount of cooler. In this case, caution should be taken, since hot pairs of air will be out of the radiator. Then you need to close the lid and wipe the extra liquid with a cloth.
Remove and clean
After washing the car's radiator, check the places of possible leaks and splashes from the valve. All the leaks wipe on a rag or rag. The used cleaning agents containing aggressive means remaining on the surface of the radiator can cause it corrosion, which will lead to the damage of the components of its elements and the early failure. Conversely, antifreeze contains ethylene glycol and various additives that prevent the formation of scale and various sediments and rust in the radiator.
Outdoor cleaning
Often overheating car Engine It may be caused by the strong contamination of the radiator outside. For example, it can be scored by a poplarian down or dust. To solve this problem, the radiator is often blurred with compressed air. Only should be careful with pressure, as this can damage the cells of the radiator.
The car wash and cleaning of the car's radiator is also recommended. Nylon brush and soapy water scraping with radiator grille dirt. It is necessary to clean in the direction of radiator mounts, since the opposite movements can damage the fragile metal. Clean grille should be rinsed with direct jet of water and finally rinse all pollution.
It undesirable to use chemical fluids based on aggressive acids. This can lead to a significant damage of the entire cooling system, hoses and radiator seals.
Video - Washing of automotive radiators
Video - Cleaning Cooling Radiator
CONCLUSION!
Periodic flushing of the car radiator will significantly extend its service and ensure the normal operation of the engine. If a independent replacement The liquid represents some difficulty, it is better to seek help at the nearest maintenance station.
- news
- Workshop
Ban on manual traffic police radars: in some regions it is removed
Recall that the ban of manual radars for fixing violations of traffic rules (Models "Sokol-Visa", "Berkut-Visa", "Vizir", "Vizir-2m", "Binar", etc.) appeared after the letter of the head of the Ministry of Internal Affairs of Vladimir Kolokoltsev about the need to combat corruption in the ranks of traffic police officers. The ban began to act on July 10, 2016 in many regions of the country. However, in Tatarstan, DPS inspectors, ...
SUV GMC turned into a sports car
hennessey Performance Tumbled has always been famous for its ability to generously add additional hitch of "pumpable" cars, but this time the Americans clearly embarrassed. GMC Yukon Denali could turn into a real monster, the benefit that the 6.2-liter "eight" allows you to do this, but Hennessey motorists limited themselves to a rather modest "bonus", increasing the capacity of the engine ...
In Moscow traffic police arose a crown of those who wish to appeal the fine
Such a situation arose due to a large number of fines written in terms of drivers automatically, and a small time to appeal receipts. About this on his page on Facebook told the coordinator of the "Blue Voles" Peter Schukumatov. As the skulls explained in a conversation with a correspondent "Auto Mail.Ru", the situation could arise due to the fact that the authorities continued to finant ...
Mercedes will release Mini Gelendeshenage: new details
New model, designed to become an alternative to the elegant Mercedes-Benz Gla, will receive a brutal appearance in the "Gelendevagen" style - Mercedes-Benz G-Class. The German publication AUTO BILD managed to find out new details about this model. So, if you believe in insider information, then Mercedes-Benz GLB will be distinguished by an angular design. On the other hand, full ...
Traffic police published new examing ticketsHowever, the auto inspectorate decided to publish new exam tickets today for categories "A", "A1", "B1" on its website, "A1", "B1" categories and subcategories. Recall that the main change, which is waiting for candidates for drivers from September 1, 2016, concerns that the theoretical exam will become more difficult (and therefore, it is necessary to teach tickets more attentively). If now ...
OSAGO liberalization: Decision Delayed
As the deputy chairman of the Central Bank Vladimir Chilyukhin explained, it is impossible to move in this direction, because at first it is necessary to solve other important problems of the insurance industry, TASS reports. Briefly Recall: the preparation of the "roadmap" on the liberalization of tariffs of the CTP initiated in November 2015. It was assumed that the first stage on this path should be ...
Moscow Crachhering was in the center of the scandal
As one of the participants in the "Blue buckets" community told the services of Delimobil, the company in the event of an accident involving a rented car requires users to compensate for the cost of repair and further charges the penalty. In addition, the services of the service are not insured by CASCO. In turn, representatives of "Delimobile" on the official page on Facebook gave official ...
In Russia, the demand for Maybahi sharply increased
Russia continues to grow sales of new luxury cars. According to the results of the study conducted by the Avtostat Agency, at the end of the seven months of 2016, the market of such cars amounted to 787 units, which is 22.6% more than in the same period last year (642 pcs.). The leader of this market is the Mercedes-Maybach S-class: on this ...
Russian assembly Mazd: Now the motors will do
Recall, production mazda cars On the capacity of the joint venture "Mazda Sollers" in Vladivostok started in the fall of 2012. The first model, which the plant mastered, was the Mazda CX-5 crossover, and then Mazda sedans were stood on the conveyor 6. Following the results of 2015, 24,185 cars were released. Now LLC Mazda Sollers Manufechchuring ...
Magadan-Lisbon mileage: there is a world record
They drove through the whole of Eurasia from Magadan to Lisbon for 6 days 9 hours 38 minutes and 12 seconds. This mileage was organized not only for forns and seconds. He carried the cultural, charitable and even, can be said, a scientific mission. First, 10 euro scenes from each kilometer passed was transferred in favor of the organization ...
The most expensive world car
There is a huge amount of cars in the world: beautiful and not very, expensive and cheap, powerful and weak, their own and strangers. However, the most expensive car car alone is Ferrari 250 GTO, it is 1963 the release and only this car is considered ...
What you need to know to take a car on credit?, How long to take a car on credit.
What you need to know to take a car on credit? Buying a car, and especially at the expense of credit funds, is far from the cheapest pleasure. In addition to the principal amount of the loan, reaching a few hundred thousand rubles, it is necessary to pay interest banks, and considerable. In the list ...
Pollution in the car cooling system can cause engine problems. In this article, we'll figure it out how to wash the radiator (inside and outside) on your own.
The radiator of the car is the first to suffer due to dirt from the road. It especially needs timely flushing inside and outside for normal operation. Dirt, rust, scale, insect corpses - all this accumulates in it. If you do not clean it in time and bring it to a critical state, it will cause the engine overheating even with a non-intensive movement.
When the car began to overheat that cooling system gives failures - The radiator is clogged. For motorists there are 2 ways to solve this problem:
- buy a new radiator. If the state of old terrible, it leaks or detected cracks, almost all honeycombs are scored;
- Clean the engine cooling system yourself
How to clean inside?
To check the contamination of the coolant, it is necessary to examine it in the expansion tank under the hood. But you can understand anything, because all pollution happens inside - in hoses and connections. Therefore, it is recommended to make flushing. It is recommended once every 5-7 years when changing antifreeze. Tell me how to rinse and how to do it yourself.First you need to drain the entire antifreeze of the car. If the fluid is clean, then there is no point in flushing - there are no scalp or rust. If there are light pollution, then use distilled water. It does not give a strong flushing effect, but from old sediments will help inside. To do this, pour it into the cooling system, let us work from 10 to 30 minutes, then we drain it and pour a new antifreeze.
If contamination, rust slices are visible in the old coolant, and the color is muddy, then you can use 2 methods.
The first is the people's way to clean the cooling system from pollution at home. Would need packets with lemon acidwhich can be bought at the grocery store. Make a solution with distilled water and citric acid. Suitable 1-2 bags. Too strong solution is not recommended - can suffer rubber parts.
Pour this solution into the engine, let's work for 15-20 minutes. After the wasting engine, we are waiting for 2-3 hours. We drain the liquid and look at its condition. If dirt remained - we do again. This operation is carried out several times until the fluid is clean.
The second way is the use of special auto chemicals. For example, there are special five-minute flushing. Fast and easy. To do this, a special means is added to distilled water. Try not to abuse with its number and follow the instructions on the package - with improper dosage you can harm.
Flushing cooling system
Removes rust, antifreeze decomposition products, scale, sludge. Restores the passability of the radiator tubes and the circulation of antifreeze. Reduces the likelihood of engine overheating when the "plug" appears. Safe for aluminum, steel, plastic, rubber parts.What chemistry is better to choose? When pollution is large, then choose the most effective toolwhich quickly cope with your work. But it is rare. As a rule, the old antifreeze has only turbid color and small contamination. Then it will help "soft flushing". It has a neutral pH, as well as compatible with many antifreeges or antiframes. Therefore, we fill it into the tank under the hood, we go about 1,500 km. During this time, it will wash almost 99 all sediments in the engine. It is the most reliable and the best way Flushing.
After the washing is completed, you should drain the cooling fluid with the cleaning agent and rinse everything with clean distilled water at least 1-2 times. In order to prevent the formation of scale, various additives are added to antifreeze, which due to their anti-corrosion and lubricating elements prevent the formation of rust and various deposits.
How to Clean Outside?
The consequence of the engine overheating of the car becomes clogged outside the radiator (dust or poplar flock). To solve this problem, it is usually blown. It is necessary to remove it from the car and rinse with standard mini-miles (Karcher type preparations) or water under pressure. Try not to overdo it with pressure, because this is it is fraught with damage to the cells of the radiator.
Just water to pour outside the outside, because All major dirt is between cells. To "stagger" need a sink under pressure. It is undesirable when washing a chemical fluid based on aggressive acid components. This can cause significant damage to the entire cooling system, seals or hoses.
The final stage is to replace the coolant with an excess air pumping from the system, which could be formed during the bay of antifreeze. To do this, the radiator cover opens and the engine starts for a few minutes. After starting work cooling system Air traffic jams will come to themselves, it will only be addicted to add antifreeze and close the lid.
Summer time. Beyond the heat, climate control is worked inside. Under the noise of the air conditioner fan, imperceptibly began to twist the propeller of the cooling system. Why? A catchy look at the temperature board - output: overheating of the motor. Extremely unpleasant situation. How to prevent - now will understand.
We reduce the temperature: how to wash the car engine cooling radiator without removing it from the machine
Overheating is not the only signal of the need to clean the heat removal system. This can still "say":- closed in an expansion tank cooler;
- clusters of dirt and scale in liquid;
- incorrectly functioning thermostat;
- cold stove.
Before rinsed the engine cooling system from rust, it is necessary to carefully prepare for the operation. First of all, it is necessary to decide on the washing composition: homemade or purchased. The content of the consistency depends on the content of part of the cleaning technology operations.
Having a tool in arsenal from panacea, you should cook vehicle to conduct procedures. Not at all be sure to prepare such an apparatus as
high pressure. Quite limited to simple things: 
- put the car on a smooth section;
- release the minus terminal of the AKB;
- dismantle the aggregates and parts that restrict access to drain traffic jams.
The operation of plum is old "Jiji" is not difficult. It is enough to unscrew the lid of the expansion tank and turn the drain plugs into the engine and the radiator. Just before that, be sure to substitute the capacity of the required volume. And yes, work is carried out on a cold engine.
- return the lid of the expansion tank;
- run the engine for a few minutes (the exact period depends on the type of composition used);
- move the motor and wait the time dictated by the recommendations;
- merge cleaning composition through special traffic jams.
If necessary, this cycle is repeated using the same fluid. After the same scenario, the system is washed with distilled water. Next, you should make a cooling of the wage and pour new antifreeze / antifreeze.
Replacing the coolant is performed "on the cold". The necessary accessory to the procedure, how to rinse the engine cooling radiator without removing it, are rubber gloves. After all, cooling is toxic.
Attention! When starting the engine, the expansion tank must be closed.
In the process of filling any liquid, it is important to avoid the formation of traffic jams in the system. Make it is easy - it is enough to disconnect the pipe that goes to the heating fitting of the throttle node.
Removal of plaque: how to rinse the engine cooling system from rust - Motor Options
You can put both folk remedies and branded fluids. To solve the owner. The main advantage of the cargo means is the speed of dissolving inclusions.
- Lemon acid. The proportions are calculated as under domestic needs (for cleaning the kettle from scale) - 15-20 g. Per 1 liter of water. The ideal is the composition with a pH of about 3 units. Manual to action simple - dissolve the substance in a small capacity with boiling water, pour into the main capacity, fill and warm the motor to operating temperature. DVS drows out and let it stand for 5-7 hours. If necessary, the procedure is repeated.
- Acetic acid. The cleansing fluid is formed on the basis of such a proportion: 0.5 liters. on 10 liters of distilled water. Key feature - the engine must work 30 ... 40 minutes and immediately drain the detergent.
- Fanta.. The drink has an acidic composition. The system is completely filled with drinking fluid, but with a pre-released gas. Mode operations with the engine - on the first place of home recipes.
- Milk serum. Prepared for 10 liters. water. Cleaning "Zhiy" is filtered and poured through expansion tank. Motor operates 1-2 hours. The emulsion merges in the hot.
- Caustic soda. At the heart - sodium hydroxide. This product is the best answer to the question than washing the engine cooling system from accumulated inside rust and plaque. It is used individually - exclusively for cleaning the radiator, and, only copper. The heat exchanger is dismantled, is washed with flowing water and purged. 1 liter is prepared 10% soda solution. The composition is heated to T \u003d 90 ° C and poured for 30 minutes to the part. After, the radiator shell is washed with hot water and blurred in the direction, reverse the worker, for 30-40 minutes. During flushing, foam may seem. Soda poisonous - work only in gloves.
However, not all household facilities are "treated" the cooling system of the engine. It is not recommended to use such drugs as:
- Coca-Cola.
- Fairy Kitchen
- Calgon.
- Mister Muscle
Branded funds
The variety of cleaning fluids can be classified by 4 discharges:
- Acid. Well suited to remove rust.
- Alkaline. Perfectly clean pipes from scale.
- Two-component. Destroy and scale, and rust.
- Neutral. Do not contain acids and alkalis. Exceptionally preventive agent.
For your information. Use alternately different flushing is not recommended. Technology can not be used when solving this issue.
Monitoring reviews shows that the chaufferes most often use such washing compositions:
- Lavr Radiator Flush Classic
- Hi-Gear Radiator Flush - 7 Minute
Use branded consistencies is strictly in accordance with the instructions shown on their packaging. Ignoring the requirements of the manufacturer will lead to a motor breakage. 
Total
- Solving the task, how to wash the car engine radiator without removing it, is quite simple. The machine is put on a flat surface, the cooler merges. Poured cleaning composition. Depending on the kind of substance, the engine is either working for a long time, and then the emulsion merges, or heats up to a hot state and shuffles, leaving the composition to work for several hours.
- Taking the course to solve the problem folk remediesOne thing should be used: lemon or acetic acid, phantom or dairy serum, caustic soda.
- Specific "Pharmacy Medicines": Lavr Radiator Flush Classic, Hi-Gear Radiator Flush - 7 Minute, Liqui Moly. Kühler-Reiniger.
