How to install fog lights Lada Vesta? Fog lights - an indispensable element of the car. They give the car style and provide security. While creating Lada Vesta. AvtoVAZ designers decided not to equip fontumans all serial versions of the new sedan. The presence of this option is available to customers of new items only in the configuration "LUXE".

In the rest of the wizen front bumper Empty, and the installation site PTF is equipped with plugs. On many other Lada cars also lack additional lighting on the bumper. Therefore, the installation of the lower lamps on its own is an urgent question for Vesta buyers.

Benefit from fog lamps

These headlights received their name due to the fact that they are able to provide visibility in fog conditions. This natural phenomenon minimizes visibility and can easily lead to an accident. The driver is also difficult to do without fog in rain conditions, snowfall or blizzards.

The device of such light instruments as dimensions, near and far light Does not whether to level the fog effect. This fact remains evident even when installing the most powerful types of lamps (LED, xenon). The action of the above lights does not help due to the fact that rays face microscopic drops of H2O as a pair or snowflakes, and from this are reflected or dissipated. As a result, translucent paddle is formed and significantly worsens visibility. In addition, a dazzling effect is created.
Fog lamps have trumps and advantages over the main lighting. After all, PTF is located almost at the ground level. And the foggy condensate does not reach this level. Therefore, we get such an effect that the headlights direct the light under the fog veil. In addition, the upper ray, obtained from the Light PTF, has a clear boundary horizontal level and absolutely does not allow to reflect from droplets of fog, which falls in the driver's field.

Another plus fog: they have a spectrum of high width lighting. Due to this, the roadside remains highlighted even during the fog, which greatly facilitates driving on the roads with steep turns. Also these light instruments enable drivers of counter vehicle See the dimensions of the car during bad weather. The color of the lantern does not affect the quality of the dispersion, because during the fog, all colors from the spectrum are dissipated similarly. Because of this, the fog has white or gray in the light of the sun.

By virtue of the above advantages, it can be concluded that the presence of fog lights Practically needed every car. Two main advantages of installing this lighting equipment:

• improving ride safety;
• exterior decoration.

The driver rises calmer and more confident, knowing that in case of bad weather, visibility will not be limited. Also PTF help with night ride. They can be used as an additional light device. And the fact that the fog is decorated with an externally, especially relevant in the case of Lada Vesta. After all, the sedan design with them is solid and completed.

Most Vesti consumers when buying a version is not in top equipment They seek to equip the car by fogs.

Non-easy situation with installation

It should be sorted out how to mount PTF for Vesta. If the driver decides to put the fog in Vesta from an official representative of AvtoVAZ, the price of the question will be very high. In other words, the dealer has additional lanterns, the only possible way is carried out: a partial refinement of the vehicle configuration to the top one.

This procedure will cost the customer more than 60 thousand rubles. Such a transcendant price is due to the fact that it is necessary to purchase original factory parts, of which the PTF system consists.

If you add the price of all components, it is already a round sum. We should not forget about the cost of mounting this equipment. In the amount we get those the same 60 thousand. Equipment of light instruments on Lada Vesta from an official representative of the VAZ is carried out only in this way.

The complexity of equipment by counter-lines at the dealer is the complexity of the scheme, which was designed by VAZ electronics specialists. The inclusion scheme of this light in Lada Vesta differs from previous models and is more complex. In Vest, fog lights are controlled by a switch located under the steering wheel. This switch does not have a fixed position on / off.

In addition, as mentioned above, Vesta has an auxiliary body electronics unit, which is first given a signal from a stealing lever. The unit transmits a signal to the headlights. Most drivers who acquired Lada Vesta are not in the highest configuration, are unlikely to have additional 60 thousand rubles. On the installation of foglights.

Exit from position: to equip the car with headlights yourself and bypass difficulties, collecting a separate inclusion scheme for headlights. To do this, use a separate button to turn on / off.

Install PTF yourself

Consider the installation process. From the list of factory elements, you should purchase: fog, the inclusion button, insert to attach the lamps to the bumper, the relay of 4 contacts, 16-ampere fuse, wire, plastic corrugation (not less than 5 m long).
First you need to dismantle the bumper and cut the plugs on the installation places. Cutouts are made either with a crown of the 76th diameter or a knife. Screws attach the bracket of fog lights. In the lower left part under ruttle Lada Vesta (near the button opening the trunk) Install the fog lights button. It can also be located directly on the instrument panel. Pre-cut the fusing hole for the button.

PTF installation scheme

Wires leading to the right spotlight should be hidden in a metal box. From the engine compartment to the cabin lay the wire through a special hole in the pedal node. IN this case A simplified scheme is used according to the analogue of Lada Kalina, prior, grant.

Power on the relay is supplied from the battery (necessarily through the fuse). Plus contact for controlling the button is supplied from the mounting unit. The plus coming from the dimensions or cigarette lighter is taken. The device for closing a chain can be placed both inside the cabin and under the hood. We connect all the chain elements according to this scheme and check the PTF using the button.

As you can see, the confonstruum set, installed on its own, is much cheaper.

2016-12-10 23:08:52 0 By: Admin. Read: 6157.

Fog lights, like the main optics of the car, plays an important role in creating high-quality lighting. The fog is especially relevant in poor visibility. For example, during rain, strong fog or snowfall. As for the Lada Vesti, here the situation is such that the fog lights are provided only in the configuration "Lux". Therefore, the PTF installation is relevant for this car family. If you firmly decided to install fog on your own, then this review is for you.

The main stages of the PTF connection on Lada Vesta

It must be said that it is somewhat more complicated to install PTF on Vesta than the other Lada cars. On the other hand, you will, thus save a fairly decent amount. So, for example, the official dealer with you can take up to 10 thousand rubles for the installation depending on the region. If you do not have such a sum, then it is better, of course, to install it yourself. Therefore, be patient and sufficient time.

To install fog lamps on Vesta, you will need to purchase:

1. Fog themselves"There is a choice: to take or or or PTF Tyun-Auto (and look for light bulbs) or take Chinese dubious quality (there were precedents when they simply melted).
2. Brackets for the installation of PTF, Actually, what is directly holding tumanks. It is very difficult to find the original brackets, AvtoVAZ does not produce them to a free market. It is very good, they are worthy of quality, completely repeat the geometry of the original and they are always in stock.
3. Facing PTF. Here the situation is simpler - you can cut holes for tumankov with a diameter of 76 mm in your cladding, or purchase.
4. Wiring. Required . It's more complicated here, since special buttons or spaces for the PTF switching on the cabin are not provided.

The first thing to be faced with when connected is it with a scheme of electrical equipment that is completely different from grants or priors. First of all, on Vest, the control of fogs is carried out by means of a steering wheel switch, in which there is no fixed position for switching off PTF. At the same time, the signal on the inclusion of fog is not directly to the Famos, but through a special block that is present only in the luxury cars. Therefore, in order not to harm the car and not to spend your extra a couple of hours, we recommend bringing a separate button for PTF.

Now you can proceed to the direct installation of PTF. First, remove the bumper and replace the existing PTF cladding on the "luxury" or neatly cut the plugs with a stationery knife or a crown by 76 mm. Then take the fog and secure them on the brackets using self-tapping screws, and the bracket directly to the bumper.

Connection - the next and very important moment. To do this, stretch the existing wires from the set to each of the tumanok, the free end is connected to the relay (it can be installed in the mounting unit or in motor compartment). Now connect according to a universal scheme, like viburnum or priors. From the battery, take the "+" on the relay, and the fuse must be used. There you can also take a lot of "-" right with the "minus" terminal, or it is better to find a naika and fastened to it. The control plus on the relay comes from the button from the cabin. Now stretch the wire for the button and set the button (the most convenient button from switching on PTF 2109) to the decorative fuse block next to the headlight adjustment unit.

If you first buy optics for the car, you will be useful for the following guidelines for the choice of parts:

1. The main thing in such details is strength. Glass has high strength characteristics. It is much thicker of fragile plastic, so it is more difficult to damage with small pebbles when driving on gravel.
2. Take models with folding housing. It is convenient because if the glass or plastic crashed, you can replace one particular part, you do not have to remove all optics.
3. Choose models with a streamlined case. This will reduce the aerodynamic resistance and reduce the noise level when driving at high speed.
4. Buy options with the ability to adjust. Adjust the direction of light, select the desired angle without removing the fog lights. So you can adjust the lanterns correctly in order not to make counter cars.

Among the motorists there has been a stereotype for a long time that high-quality fog lines produce only with yellow glass. Today, more and more manufacturers are refused yellow, preferring transparent glass. This is happening because these models are higher than the level of lighting and width.

Economical price for a set of foglights on Lada Vesta in our store

You noticed that we have low prices on goods in the catalog. This is the real cost of spare parts, without cheating. High quality products, we yourself personally check the items manufactured and support feedback with customers, because your opinion is important to us. You can always write us wishes for product design and quality, if noticed shortcomings.

In the popular Russian model Lada Vesta, fog lights have only luxury variation. In the remaining modifications and equipment in the bumper there are special plugs that close the niches to install PTF. You can carry out the installation procedure at the dealer, but it is not suiced. Not every owner will dare to such a step, so optimal option It is an independent acquisition and installation of a PTF set. However, we will tell you how to install headlights.

How need fog optics?

Lighting equipment of this purpose allows you to improve the conditions for a safe movement. Especially acute this moment is felt in bad weather when the visibility of the road is significantly reduced. It is important not only to establish effective fog lights, but also to adjust them correctly. Enhance visibility contributes to the dispersion angle and a powerful light beam. Other drivers will easier notice the car with the fog lights included.

Also at night, fog lights have proven their effectiveness, since they allow the driver to see the situation not only in the immediate vicinity of the bumper, but also by roadbrains.

We affect aesthetics. In this regard, Lada Vesta, equipped with additional lighting, looks more harmonious in comparison with the car, in whose bumper is sadly "sit" plugs.

The cost of mounting PTF at the dealer?

The official representative offices of AvtoVAZ consider the installation of lighting equipment as a refinement of the equipment of the car Lada Vesta to the level maximum configuration. The cost of the procedure reaches 60 thousand rubles.

The transcendant price is due to the complexity of the process of a dealer method, which also involves the use of parts of the original production. Only some cables will cost the owner of about 20 thousand rubles. Therefore, many car owners are interested in how to install headlights personally.

Handy installation Allows you to accrue a significant savings. The only unpleasant moment here may appear possible cancellation of warranty support.

How to choose the right headlights and materials to them?

The highest quality indicator has the original set of headlights produced by the "Valeo" brand (code: "FCR220029"). These devices have the cost of 3 thousand rubles. For a couple.

If this price scares the buyer, you can choose products from "DLAA", and it is almost twice as cheaper. If you wish to establish xenon options for PTF, you should study in detail the experience of the owners and material on this issue.

Important! It should not be inclined to buy cheap options, since the quality of them is far from ideal, and the cases of melting are not so rare.

Next important elements Set are brackets for fasteners. For two products will have to lay out about 700 rubles.

Now consider other products present in the kit:

• button to turn on or off headlights;
• relay;
• cables with plastic corrugated shell and switching connectors;
• fuse (current - 16 A).

For the designated set of sellers "ask" about 600 rubles.

Also additionally should be purchased for PTF. For 2 pcs. The owner will have to part with 800 rubles.

In general, the purchase of the PTF set will require a budget in the amount of at least 5 thousand rubles. All specified products are available in the warehouses of most online stores, which makes the purchase of an operational event.

How to install fog optics for Vesta?

Installation with your own hands implies the implementation of several stages:

• dismantling of the bumper;
• preparatory manipulations S. landing places;
• installation of headlights;
• installation and subsequent connection.

We dismantle the bumper in Lada West

The product is sufficiently massive, so when removing there is a risk of damage to the LCP. Here we use all available precautionary measures.

1. Turn off the battery and remove it.
2. The place where the removed bumper from Lada Vesta is stacked, prepare in advance, spreading soft tissue.
3. The lower edge of the bumper is attached to the lingers by means of 4 self-tale. They are subject to unscrewing.
4. Also unscrew the two screws with which the product is connected to lockers.
5. The upper perimeter of the bumper is held by six bolts, which also dismantle.
6. Unscrew a couple of bolts under a number sign.
7. I pull the body element on yourself, gradually giving him the opportunity to get out of the engagement with the side brackets.

Preparing landing niches and fasteners

1. As already mentioned, at the places of future PTF there are plugs. Crown with a diameter of 76 mm cut into these products holes. If the owner of Lada Vesta acquired facing panels of the headlights, this stage is skipped.
2. Go to the brackets. They are fixed on the bumper with ordinary self-draws.
3. Construct a hole for the button. To do this, we investigate the front panel in the cabin and are determined with the optimal place for the switch. Alternatively, the button can be positioned on the center console near the button responsible for unlocking the luggage compartment.

Connect PTF by car Lada Vesta

1. From the right lighting device, the wiring is packed inside the box.
2. The Lada Vesta salon cables are served through a hole present near the pedal node.
3. Connection We perform on a simple and universal scheme. The meal is borrowing from the battery, we switch first with the fuse, and then with the contact relay.
4. Plus contact comes out of the mounting unit, or rather the fuse of the overall light. Alternatively, "Plus" can be taken from the cigarette lighter.
5. The relay should be installed in the sub-compartment of Lada Vesta (can be in the cabin).

The installation is completed with your own hands. The considered method of switching is not only simple, but also allows you to achieve minimization of intervention in on-board network Auto.

Let's summarize

Installation with your own hands of such an element in a car, as PTF in Lada Vesta allows you to save a lot of money (not one tet of thousand). Auxiliary materials and adaptations to establish fog lights will require the owner to part with 5-6 thousand rubles. On the implementation of the procedure will take several hours, but now the car will not only look profitable, but also provide improved visibility in bad weather and at night.

The fog light (PTF) is the necessary part of the external image of the car. It is more important that such lights should cover the driver of the road space even in heavy rain and blizzard. The item is obliged to disperse a white or light yellow tone, which forms a beam of a horizontal direction, waving over the track. The design of them is such that they do not affect the upper layers of fog, and it means that the visibility improves. In the event of a breakdown and desire to independently repair the lights, the owner will need a kit for connecting PTF on Vesta with wires, relays and special stakes. This includes a bracket.

On a note!

On most of the latest products from AvtoVAZ there are holes and fasteners for the installation of PTF, but the plant itself is practically not installed. There are numerous complaints about fog lights from the manufacturer. Car owners note that the lighting from them is very weak. Hence the rational resolution: it is better to buy high-quality PTF on Vesta and their own installed them.

How to work fog

In contrast to conventional long-distance or dipped, which creates a translucent waterproof to rain, complicating visibility, PTF with its specific range of action is sufficiently illuminated by the road fabric. In addition, the fog of Lada Vesta plays a positive role for counter drivers in difficult meteorological conditions. To ensure excellent visibility in a blizzard, heavy rain, etc. PTF is developed in the following specifics:

• It has a sufficiently clear upper facet of the light beam. It follows that lighting and reflection does not rise above the minimally necessary horizontal threshold.
• The fog lights of Lada Vesta must be installed closer to the road itself, since there is always a clean interval of the atmosphere between the track and layer of foggy pellets, where and the wide beam should penetrate.

Choosing foglights on Lada Vesta

First of all, make sure that the products you purchase are assessed:

• The body of the product must be tightly fastened and assembled. The tightness of the fog lights increases the service life and avoids the extra visits to the dealerships. The material material should be immune to severe weather conditions.
• Quality fog lights are equipped exclusively glass lenses. Plastic - a very fragile material and breaks when the most minor stone is hit when the vehicle is moved.
• For the light filter, the details are recommended yellow, which is best cuts for long waves of light during thick fog. If there is a feeling that this solution is spoil appearanceYou can stop the choice on specific lamps.
• The latter, but not much to significance, the criterion will be the possibility of paging PTF. In this case, when breakdown, it is enough to change the lamp, and not to acquire a new one.

Installation of fog lights on Lada Vesta

To change the burned element, you should purchase a complete set of PTF and ensure yourself freedom at its placement. There are two ways:

1. The first is simple and runs in two bills. Afterverting the wheel in the middle, you can find the space where the fog lights of Lada Vesta are. However, if it is impossible to unscrew the screwdriver using a screwdriver, you should resort to a more complex method.
2. To gain full-fed to access the place of installation and adjustment of fog lights Lada Vesta, you need to dismantle the front wheel.

The housing of the light element is located on the rig itself, plastic, which is mounted on the car body arch and protects it from dust and dirt.

1. To replace the whole block, you will need to unscrew four screws with a hexagon.
2. After that, you should disconnect the element from the wires. The installation of PTF on Lada Vesta has some difficulties, so there is an opportunity for about 800 rubles to give the car to the masters.

Most lovers may have a question: how to install PTF brackets? This requires tools and screws. After the installation of tumanks is completed, adjust the angle of the light of light.

In order to get directly to the old burned lamp and connect the working, you just need to rotate the hatch on the cover of the inner wall of the housing counterclockwise. To unscrew it, you need to turn the element in the opposite direction. Pressing the locks, easily remove the burnt item.

Causes of PTF breakdowns

Installation of the fog is made in the event that they were not in factory execution or if necessary. Lanterns are connected to the network separately from the main optics. In the event of a fault, the fog is needed to carry out the following manipulations:

1. The first thing is checked by the fuse in the part itself. After driving it from a special niche, consider the element for the presence of burnt or torn wires. If necessary - change.
2. In most cases, the wire system is rupture. The ammeter helps here, which will show the absence of voltage.
3. If the main optics does not work with PTF, the problem takes on a large character, ranging from the accumulated battery and reaching the headlight wiring.
4. When incapacity for one of the fog, the reason you need to look for in it.

On a note!

Very often, the owners carry out the installation of new equipment instead of the factory. White light filters of foglights Lada Vesta from the manufacturer are completely ineffective in heavy snow and fog. To secure flashlights on the housing included brackets. Xenon instead of halogen should go along with a special curtain so as not to blind oncoming drivers.

Where to buy fog lights Lada Vesta

Detail in a wide variety is available on Internet sites and in dealerships. When buying, you must remember all the criteria that can not be gone with the choice.

• On Lada Vesta should not be lane with the index higher than H-11, this can lead to wiring;
• a thick-walled lens is best suited as glass, which does not reflect light and not blinding oncoming cars.

The price of fog lads of Lada Vesta varies in the range from 250 rubles to 3,000. Work on the change of lamps is about 1,000 rubles. Installation do it yourself and pTF connection It will cost cheaper, but will require some effort.

• 
  
•