The exterior style depends not only on the type of body color, some tuning elements, but also appearance Wheels, and in particular - disks. However, approaching the recruitment of these components should be not only from the side of aesthetic values, but also comply with the size of the factory requirements of Mazda Demio all 1.4L / 1.5L 2000, as well as indicators performance characteristics. In the latter case, on the background of stamping, products made of alloy alloy metals are largely won. However, financially not every motorist can afford them.

Read more about the assortment presented

Regarding forged products, alloy wheels in Moscow are inexpensive structures, but they are expensive than motorists compared to steel rims. However, they are in great demand in connection with the possibilities of casting technology to produce real masterpieces on the style of alloy products. Lightweight designs are able to become the main highlight of the exterior of Mazda Demio all 1.4L / 1.5L 2000. They have a worthy resistance of corrosion, which you can not say about steel disks, and demonstrate excellent running quality.

Machine rims made of aluminum or titanium alloy, which are valued by excellent physicochemical properties. At the same time, in terms of strength, these alloyed metals are not particularly inferior to steel. FROM alloy disks Mazda Demio owners All 1.4L / 1.5L 2000 may not worry for the safety of high-speed indicators.

In addition, alloy wheels are valued by fuel efficiency, which is ensured by the ease of construction and the low rolling resistance coefficient. In addition, they have excellent thermal conductivity, which makes it possible to prevent the probability of overheating brake and systems. This property allows drivers to feel somewhat more confidence in the safety of movement. Alloy products are balanced and have a high accuracy of geometric parameters.

Choice complexity

Such a wide range of discs, which is offered today domestic and foreign manufacturers create certain difficulties when buying components in Moscow. After all, sometimes brands for the same specifications Products exhibit completely different prices. However, is the quality of the quality indicators?

On the website of the Wheel Dair online store, you can familiarize yourself with various reviews of motorists who have already managed to evaluate all the advantages and disadvantages. different disks On Mazda Demio all 1.4L / 1.5L 2000 and make your choice. You can also consult with the competent managers of our store, which can not just pick up for you optimal option Wheels in quality and cost, but also answer all the questions that arise.

When choosing disks, it is worth noting the importance of the quality factor, which you move. If you have to overcome the extreme difficulties of relief daily, it makes sense to give preference only by budget stamped components.

If you have a limited budget can always be purchased more affordable by price, but no less high-quality replica. Moreover, today many brands create copies of original wheels, which are not inferior in the performance of the operational characteristics of "native" details.

Why should you buy discs in Moscow?

We propose not to waste time for long searching for reliable distributors of automotive components and order wheel items in the Wheel Dair online store. We have a wide range of models of discs of various types from the time-tested manufacturers. We are sure that you will be satisfied with the quality of our service and directly acquired goods.

Content

Hello, dear site reader Site! In this article I would like to tell you what staten sizes Disc and tires on Mazda Demio ...

Disk size and tires:

Pressure:

• front: 30 (PSI) 2.0 (BAR)
• rear: 30 (PSI) 2.0 (BAR)

Landing Answer: 4x100

Central Answer: 54.0

Bolt thread: M12x1.50

Disc designs

All car wheels that have been certified have a factory label containing information about their basic parameters. For example, the designation of the wheel 5.5Jr14 ET25 4x100x54 (some standards allow another sequence of the designation) decoded as follows.

5.5 - The landing width of the rim is the distance between the inner surfaces of the onboard creek wheels (measured, as a rule, in inches). Specifies the possible width of the tire installed profile. It is allowed to deviate the landing width by 0.5-1 inch, however, for low-profile tires it must be minimal.

J. – symbol Onboard rim. May be absent. In most cases, it does not affect the ability to apply any type of tires.

R14. - The landing diameter is the diameter of the ring part of the rim on which the tire is based on (measured in inches). Must accurately match the seating diameter of the used bus.

ET25 - departure (may designate, as it is, e, offset) - the distance from the aircraft plane of the wheel (adjacent to the hub) to the plane passing through the middle of the rim landing tire (measured in millimeters). For each car, the manufacturer provides a list of permissible options for replacing the wheels. It corresponds to the range of deviations from the standard departure (field of tolerances), within which changes in the characteristics of the suspension are insignificant. As a rule, the deviation of the departure + 5mm is insignificant.

• if the departure is more provided, then before purchasing the wheel it is necessary to "try" it to the hub of the car. Before practicing brake mechanisms with a movable caliper (changing their position, depending on the wear of the pads) should be translated into a state corresponding to the new (inhabited) brake pads. After the end of the fitting, it is necessary to restore the performance brake mechanismsby clicking on the brake pedal several times;
• installing wheels with departure. Significantly less envisaged, leads to a significant reduction in the resistance of the car in turns, increased sensitivity of the steering to road irregularities and non-uniformity of brake efforts.

It is not allowed to use wheels, the departure and the landing width of which do not correspond to the car provided by the manufacturer.

4 - Number of mounting holes. On the passenger cars Maybe 3, 4, 5, 6 holes.

100 - Diameter of the circle of the centers of mounting holes (PCD), is measured, as a rule, in millimeters. This value must accurately match the standard, otherwise it is impossible to achieve reliable fixation Wheels on the hub. For example, the replacement of the wheels at Volkswagen Golf 2 (PCD \u003d 100) is similar to similar from the VAZ (PCD \u003d 98) will definitely lead to distortion of fastening elements (bolts).

54 - Diameter central opening (CSC) must correspond (with minimal gap) the diameter of the centering protrusion on the car hub (measured in millimeters). It is allowed to deviate its magnitude in the most side. In this case, for installation of the wheel, transitional centering rings are used (sometimes included in the set of alloy wheels).

Tire designation

Example: 165x70R13

165 - profile width in mm

70 - profile height in% of width

R13 - landing diameter in inches

Nor nail or rod to you!

Offered to our customers automatic selection of tires and discs for the car Mazda Demio. Allows you to solve a problem with compatibility and compliance with the recommendations of automakers. This is due to a weighty role, which is fulfilled by them in providing a number of operational characteristics of any modern vehicle. In addition, it is impossible not to note the importance of tires and wheel diskslike elements active security. That is why their choice should be approached as responsibly, i.e., with knowledge about a number of parameters of these components.

Unfortunately, only a small part of the car owners owns such technical nuances. Regardless of it automatic system The selection will be extremely useful, that is, it allows you to minimize the likelihood of incorrect decision when choosing those or other tires and wheels. And it is very wide, which is due to the variety of the range of such products presented in the online store "Mosavodina".