The washing machine, like other household electrical engineering, after a period of operation fails and is no longer repair. Therefore, you have to acquire a new one, but where did you give the old car? Of course, you can simply be thrown into disposal as MBS. But this is the impractical hosts, because the design of this household equipment includes many useful elements that can be useful in the economy. Consider what you can do from washing machine-machine.
What details can be used
The washing machine is a rather complicated household equipment, which includes a plurality of individual elements. The more modern, the more in its design it includes details.
Elements of washing, which can still come in handy:
Important! If you understand the electronics, then you should not throw away the control unit, which includes a large number of semiconductor components that can be useful when repairing other electrical equipment.
Application of the working engine of the washing machine
Consider some homemade from the engine from the washing machine. Today, with the help of the Internet, many homemade craftsmen are happy to share own inventions, in the design of which used spare parts from old washing machines. Consider the most sought-after.
Making concrete mixer
When repairs in the apartment, a private house may need a small amount of concrete solution. Rent for such a purpose concrete mixer is too expensive. You can build such a tool yourself, for which the case is suitable from the old wash (except for the machine).
Manufacturing instructions:
Simple concrete mixer for operating conditions is ready. With this device, you can easily prepare a bucket of the solution.
Entry from the engine from the washing machine
The working motor from the old machine machine can be used for making their own electrical emery. This is done very simply - the sandpaper (sharpened) is installed on the motor shaft. Such a tool will be very practical in the country, since it can be molded not only knives, but also shovels, axes.
Cubezka, Grainrock
Those who have a small plot of land, contains a household, does not hurt the grain mill made by their own hands, the bubble. If the electric motor machine machine is used for this purpose, then the homemade device will not work worse than the factory equipment.
Make in household conditions the bubble is easy. In addition to the motor, you will need a housing of the top loading machine that can be found on scrap metal.
It is important to understand! The engine factor of the washing machine can be used to make a variety of different economic tools that require rotation.
Worker Motor Washing can be applied to manufacture homemade toughness.
How to connect a motor from a washing machine
If the owners of the old typewriter have ideas for the further use of the engine, the question immediately arises how to connect it to the electricity network 220 V.
To begin with, it is necessary to deal with the electrical circuit, after which the engine connection to the power supply does not take a large amount of time. You need to deal with wiring. Specifically, the wires connected to the stator, the rotor will be used.
How to choose the desired wires
Look at the front of the block with wiring - the first two wires on the left are most often the wires of the tanker, through which the herald motor revolutions are adjusted. They will not need them.
Then there is a red, brown wire of the stator, and behind them two wires (green, gray) connected to rotary brushes. All these wires will be needed to connect the engine to the power grid.
Important! To connect to the power grid with a power of 220 to the engine of the washing machine, the starting capacitor is not needed, and the motor itself does not need a starting winding.
Of course, in various models Wire washes differ in color, but the principle of connection is similar. To deal with the wiring, you need to ring each wire using a multimeter. The device must be configured to measure resistance. Then one probe device is applied to any wire, the second probe is selected steam.
A quietly functioning tachogenerator most often has the resistance of about 70 ohms. These wires are recognized primarily, removed to the side. After that, the rest of the wires are nicknamed, divided by pairs.
Connect the engine to the network
When with wires already everything is clear, it is necessary to connect them correctly:
- In accordance with the scheme, the end of the stator winding should be connected to rotary brushes (it is recommended to make a reed jumper).
- It is necessary to connect with the power grid wire of the rotor brush, the end of the rotor winding. After serving the voltage on the wires, the motor will start turning the shaft.
Important! Motors of the washing machine are characterized by high power. To prevent injuries, you must be extremely careful. Therefore, before launching the equipment, the motor is recommended to carefully fasten to some basis.
Application of drum washing machine
The drum from the washing machine, made of durable stainless steel, can be used for a variety of goals in the farm. From it you can make with your own hands a lot of practical products, such as a barbecue or a roaster for a barbecue.
How to make a roar:
- it is necessary to disconnect the drum from the old erasing together with the shaft and pulley;
- install it up with a hatch on the wheel;
- brazier is ready.
The working part of the brazier can be slightly increased. To do this, you will need a Bulgarian with which the front of the drum located near the hatch is cut. Accordingly, it will be much more convenient to put firewood.
For your information! For the manufacture of kebabs, the drum is the perfect material, as it has a huge number of holes through which the air flow will evenly inflate coals, creating the necessary heat.
Do not throw out the washing machine that has spent your time, as it consists of a variety of useful details that will still be able to come in handy in everyday life, in the country. At the same time, various adaptations made with their own hands will help save. cash.
In some situations, it is cheaper to purchase a new product than to restore the emerging household appliances. However, a calculating person will receive additional benefits using functional components to be destined. This publication presents homemade from the engine from a washing machine .. and video phrases will help to more accurately reproduce the self-catering of masters and get useful products quickly and without excess costs.
Read in the article:
What is the most suitable engine from the old washing machine
First you need to clarify the real possibilities of the existing power aggregate. In the household appliance of the Soviet period, sufficiently reliable asynchronous type electric motors (180-220 W) were established. They were connected to two-phase AC networks. Previously, the design was created in the collapsible design. Therefore, with a breakdown, repair does not cause excessive difficulties. The only exception is damage to the windings. Modern models are distinguished by an enlarged power (up to 340 W).
From the end of the 90s of the last century, such simple engines are not used. Instead of asynchronous, the collector aggregates are used more often. They are more compact, weigh less. The corresponding modifications provide for the possibilities:
- dC power connections;
- smooth adjustment of revolutions.
For supplying current on the rotor part, graphite rods with spring pushers are used. These details should be replaced periodically. The power of the collector type electric motors is from 340 to 780 W at the speed of rotation of the working shaft in the range of 11400-15200 rpm.
The photo shows the power unit that the engineers of the famous South Korean brand LG applied for the first time. It is often referred to as inverter, as it is possible to smooth speed frequency adjustment (up to 2 thousand per minute) using an external control device. The power of such aggregates exceeds 500 W, which allows you to connect it directly to the drum shaft without a special belt drive. The following parameters and features of the engine from the washing machine can determine where this power unit can be used:
- power;
- work shaft rotation speed;
- dimensions;
- power and control circuit.
For your information! More attentive people pay attention to maintainability, reliability, resistance to external influences. They explore the opinion of specialists in specialized forums, official guarantees of manufacturers.
What can be made from the old washing machine: examples of work with comments
The following information will help implement different projects based on the relevant power unit. Here are the active homemade from the motor from the washing machine, which showed themselves well during practical tests. Some projects are attached step by step instructions With detailed explanations of the assembly process.
How to make a grinding machine or sharpened from the engine washing machine
| Illustration | Description of action |
 | First of all, we define what removable nozzles will be applied in practice. The features of processing processes are essential: the duration of the cycles, the hardness of the material of the billets, etc. |
 | In this embodiment, the author uses grinding discs with a diameter of 200 mm with a sticky layer on the non-working side. It picked up approximately corresponding to the size of the nozzle from the "Bulgarian" (175 mm) with a threaded connection in the central part. |
 | For the implementation of the plans, the old engine washing machine was found, which rotates anchor at a speed of up to 1500 rpm. In the photo, the arrow marked a start relay fixed on the housing. Power - from AC 220 V. |
 | A special nozzle has been created on the lathe. It is attached to the shaft of 14 mm using the screw. To the end of the part is welded with a threaded rod, which corresponds to the adapter connective node. |
 | In the course of practical tests, it became clear that the initial rotation does not correspond to the direction of thread. This means that when performing working operations, the nozzle will be disfunned. The author did not apply a special electrical circuit, and changed the hull cover places along with the bearing. |
 | For reliable fixing of the power unit, a special feature is created from steel corners. Welded connections are cleaned. At the final stage, the product is covered with successively primer for metal and paint. |
 | With the use of screws to the bed, a table (1) is connected, equipped with a rotating frame. The center has a support rod (2) with adjustment in height. With it, you set the exact angle required to work with the billets. |
 | The assembly confirmed the accuracy of the calculation and individual details. To exclude errors, you need to prepare a set of drawings in advance. Optionally compliance with engineering guests. However, it is necessary to carefully understand the features of each component of the design, mark dimensions and landing dimensions. |
 | The practical test shows the good functionality of the new machine. Power is quite enough to handle duralum blanks. Additional plus - quiet operation of the engine washing machine. |
 | For collecting and removing waste, a special box with a weighing nozzle for connecting a vacuum cleaner is made. It is installed at the bottom of the bed under the working area. |
For your information! According to this algorithm, it is easy to create a high-quality grinding machine from a washing machine. To enhance security, it is necessary to use individual protective equipment during processing. A transparent polymer shield is also useful, which closes the working area.
Turning machine
It sharpened with your own hands from the washing machine to create a little difficult. However, the following example demonstrates the relative simplicity of manufacturing more complex equipment.
Since applied asynchronous engine From the washing machine "Vyatka", a condenser is installed in the power circuit. Anchor of this power unit rotates at a speed of 400/3000 revolutions per minute. To install the axis parallel to parts of the frame, selected the washers of the corresponding thickness.
Lawn mower
An important nuances are marked in the picture:
- These rods (1) must have sufficient strength, as the movement of equipment by the site is performed manually.
- The engine switch from the washing machine for the convenience of the user is set near the handle. A wire (2) with high-quality insulation is used for the compound. Provide good tightness of electrical components so as not to create emergency situations in conditions of high humidity.
- Belt drive (3) reduces the level of vibrations. By changing the size of the pulleys, select the optimal speed of rotation of the knives.
- Such nodes (4) are used to adjust the lumen, the height of the lawn haircut.
- Large wheels (5) will be suitable for overcoming obstacles on the land plot.
Cormor
How to turn the engine from the old washing machine into the generator
However, to obtain such a result it is necessary special preparation. At the end of the rotor make a deepening. Enshrid it permanent magnets. The upgraded item is installed in place. To accumulate the energy, use a rectifier and battery. These blocks are connected through the controller to optimize the charging process.
Concrete mixer
Here, two belties are complemented by a gearbox. The complex it turned out to create the necessary torque at relatively low power of the electric drive.
A circular saw
What can be made from the drum of a washing machine: simple designs
In practice, not only the engine from the washing machine is useful. What can be made from the drum, told in the following sections of the publication.
Mangal of drum from washing machine: photos and useful tips
A stainless steel brazier looks great. It lasts a long time saves functional characteristics and impeccable appearance. It is easy to clean from pollution. There are no sharp corners and other potentially dangerous parts. High temperatures are useful. A small weight implies the absence of difficulties when moving. The most suitable blank is a drum from a washing machine with vertical loading. It has special doors installed that cover the furnace, adjust the air flow.
Will the smoking machine work
For processing meat, fish and other foods are placed for a long time in a closed container, where a high concentration of smoke is supported. Apply low and high temperature technology. In any case, good tightness is useful.
All excess holes brew. Install the pipe for the supply of smoke. Inside mounted lattice shelves and suspensions to accommodate products.
Decorative and functional crafts from drum washing machine
These pictures contain examples of products that can be created quickly and efficiently without detailed instructions:
How do you create a persem machine from a washing machine: the use of several parts of old equipment
The photo demonstrates what can be made from the washing machine machine of an activator type. After a significant alteration, a convenient device will be obtained, which will help to automate the tedious processing process of bird processing before selling (long-strating). Such equipment is used to solve household and commercial tasks.
A similar design is created from a washing machine. In the walls of the tank and the disk installed below, rubber pins (biles) are inserted. When rotating the bottom part, these elastic elements tear the feathers from a carcass. To increase the efficiency of the process and destruction of the garbage, watering is used on the upper side of the tank.
Homemade engine from washing machine: conclusions and additional information
In any case, even when working with a relatively simple design, project documentation should be prepared. This will simplify the search for additional components, prevents the assembly error. To publish your own ideas and receiving answers to additional questions, use comments. With the help of our online magazine, it is easy to make the correct conclusion about what to do with the old washing machine after the completion of the target use of the technique.
The video demonstrates the principle of operation and features of the perosorum machine:
Often there is a situation when it is necessary to sharpen the tool or batten the knives. To perform these works, the sharpening machine is best suited - it is also called sharpened or emery. This is the simplest power tool that consists of electric motor and abrasive circle. In the trading network, many options are sold, which differ from each other by the price and manufacturer, but are intended to perform one function - sharpening the cutting tool. Do not hurry to acquire the powerful factory manufacture: any home master is able to make it with your own hands in the presence of required spare parts.
To make an emery independently, first of all it is necessary to choose a suitable electric motor. Most often it is a motor from the washing machine of an old sample, for example, baby - it is not suitable for this purpose. Such a motor meets certain requirements: its capacity is within 100-200 W, and the number of revolutions does not exceed 1500 revolutions per minute. If the speed of rotation is greater, the risk of destruction of the abrasive circle will arise.
High engine speed is needed for polishing parts, and they are not suitable for sharpening.
To make homemade emery, you can apply any another electric motor. It must respond to certain parameters.
- The rotation of the shaft should be minimal. Motors that have no more than 1,000 revolutions are best suited.
- The engine power must be between 100 W to 1 kW. Most often used 400 W motors.
- It is desirable that he had a paw for fastening.
- The best one-phase or asynchronous motor suitable for inclusion in the 220 volt network.
Algorithm for assembling emery from the engine from a washing machine of a baby
First of all do stanu of the future mechanism. It can be made of thick wooden board, wood trips, suitable plastic, but the thick metal plate is best suited. With the help of brackets, corners or clamps, the electric motor is fixed. The connection of the electric motor with a stone occurs by means of a flange.
Homemade Flea
Production of flange - One of the technically complex operations when assembling homemade emery. It is made, as a rule, with the help of a lathe. To do this, it is necessary to measure the diameter of the output shaft and the abrasive circle, which will be used in the sharpening machine. However, if there is no lathe at hand, you can do without it. On the video below, you can familiarize yourself with how to make a flange for emery from the girlfriend alone:
Flancing fastening On the shaft occurs with the nut with a bolt and a washer. At the same time, it is necessary to take into account the direction of rotation of the shaft: the carving on the nut must be in the opposite direction.
This is done for the purpose of security, so that during operation, the nut is unacted under the action of the vibration of the machine, which is fraught with the flushing of the abrasive circle and injury.
Finally, it remains to mount the hipper at a permanent place and bring electricity. Entreb from the engine from Baby ready.
In the case of the use of the engine dismantled with the washing machine, it is possible to make a sharpening machine in a similar way, the difference consists only of electricity connections. The motor from the ordinary washing machine has four wires: two are connected to the operating winding, and the other two to the launcher. To determine the working winding, it suffices to measure both resistance. The resistance of the launcher is 30 ohms, and the working has only 12 ohms. Engines modern machines Have six conclusions, two of which is the yield of a tip with a resistance of 70 ohms. Find them will not be a lot of work. These wires must be insulated.
Connection scheme It is as follows: both windings are connected in parallel and connected to the network, and the button will connect the button into the breakproke break. To do this, you can take a start-up or adjust the button from the doorbell.
How to adapt drill and grinder under the electric
You can make the emery not only from a suitable electric motor available. To do this, you can adjust the power tool - it can be an electric drill or screwdriver.
The latter is worse for these purposes: he has insufficient power and a small battery life.
Manufacturing sharpened from a drill begins with acquisition of nozzles.
It pinch a sharpening stone, and then clamp into the cartridge. It remains to consolidate it on a fixed base with a special attachment that can be bought in the store selling power tools. With the help of such an electrician, you can fix the ax, to the kitchen knife or fix the drill.
In case of extreme need, you can grind from Bulgarian. For this, it is not required to purchase special devices and mandrels required for fastening the emotion. It is only necessary to fix it in a horizontal position on a massive base, set a standard cutting or sharpening disk, and sharpened ready to work.
Mini Speed \u200b\u200bMachine
Electric sharpened needed if the master engaged in modeling: When working it is often necessary to press small details. The big sharpened is not adapted to perform small work, so they often make mini emery with their own hands. The assembly algorithm is as follows:
- take the engine from the hard disk of the computer or children's toys;
- the tension sleeve of the spokes from the moped is soldered to the axis of the engine;
- the small sharpening circle is screwed with a screw and washers to the shaft;
- plug the power supply;
- fix the device on the bed, and the emery is ready.
Often, electric motors from a faulty sewing machine are used for these purposes. The advantage of this machine is that the engine has a speed controller, and this expands the capabilities of the device. It can be successfully applied and as a polishing machine.
Safety when working with self-made device
Machining power tools independently, it is necessary to strictly follow safety. If industrial aggregates are equipped with means of protection., Then in homemade devices We will have to make them yourself. It should be known that the operation sharpened from the engine of the washing machine without protective casing Forbidden. It is possible to make it from a sheet metal with a thickness of 2.5 mm.
Working circle during sharpening is experiencing strong vibration. To exclude the destruction of the emery during operation, installing the stone, under metal washers put gaskets from cardboard. You should also make sure that the disk does not have cracks.
While working should be on the side of the circle, so that when it breaks, the fragments do not fly to the operator.
Your favorite washing machine has already lived his life, and you decided to send it to the garbage? Do not rush, because you can create various homemade engine from a washing machine.
In contact with
Spare parts
The automatic washing machine has a rather complicated design. Even in the event of a breakdown, there are spare parts necessary for the manufacture of some homemade. Let's see what can be made from the spare parts of the old washing machine.
The main spare part, of course, is the engine (motor). If it is working, it can be used for the manufacture of the generator, sharpeners, lawn mowers and other devices. Carefully disconnect the wires, remove the Motor from the washing machine housing and save it.
Luke cover can turn into an unusual window or in a beautiful bowl for feeding pets. Also from durable glass you can make a case for meters.
For the design of various homemakes will be useful legs, springs and others small parts. The housing itself can become a wardrobe or a unique table.
Consider more what can be done with the motor.
Motor prices for washing machine
motor for washing machine
Types of motors
Asynchronous
The oldest type of engines consisting of fixed stator and rotating rotor. The first serves as the basis and magnetic pipeline for the design, and the second creates drummer's driving force. The entire motor is driven by a variable magnetic field of components.
Asynchronous motors have a weak torque, Therefore, the drum often shake during operation. Other Disadvantages - dimensions and modest efficiency. At the same time, they are silent, cost cheap, have a simple design.
The asynchronous motor is often found in low-power cheap devices.
There are two- and three-phase asynchronous motors. The first long ago came out of production, and they can only be found. in very old structures.
Collector
The most common type of engines. Perfectly work under variables, and under constant voltage. Under the case of C. spread Rotor, Stator, Generatorproviding speed of rotation. At the collector conclusions there are special brushes, with which the rotor contacts the engine.
Note:If you connect the rotor and the stator directly, the motor shaft will rotate clockwise. For the opposite direction, it is necessary to change the circuit of connecting the electric motor of the washing machine - to connect the brushes towards the rotor.
Unlike its overall predecessor, collector engines are pretty compact and have a greater speed of rotation. They are universal: it works with variables, and with dC. The main disadvantage of the collector engine is low wear resistance: due to the constant contacting of the brushes with the collector and the brushes, and the collector is rapidly wear out. If the first can be easily replaced with new, then the replacement of the collector will cost much effort.
Inverter
Most Modern motor type The washing machine consists of a rotor and stator. Unlike other species, the inverter rotor connects to the drum directly. They are distinguished by large wear resistance, lack of extra details, ease of design, silent, small sizes.
However, all this in one motor - the pleasure is not cheap: development, production, and therefore the purchase of an inverter engine requires large financial costs.
Connection
To connect the engine to a 220-volt network, you must have a tester at hand: it will help us break the wires on the pair, And also measure resistance in windings.
Before connecting new models, you need to determine using the wire tester that out of the taogenerator And do not need us during work. It is quite easy to find them - it is enough to measure their resistance: it should be about 70 ohms.
With the help of the same device we find a pair of other contacts. Now plug one of brushes to one of the wires, And the second brush and the other wire connect to the winding outputs. After connecting the engine from a washing machine to the network, the device will start rotating. To change the direction of rotation, it is enough to change the brushes in places.
With old models, the situation is a bit otherwise: after determining the paired outputs you need determine the working and exciting winding. The first has a big resistance than the second.
We figured out how to connect the motor from the washing machine machine to the network. Now let's see which machines and devices can be created independently with it.
Selfieckers
Homemade from the motor is quite varied: with the help of it you can create T flood, lawn mower, concrete mixer, juicer, Potionic circle and much more. Consider the process of making some of the listed devices.
Emery
One of the most common options for using the old engine. Assembling the car does not require special effort. The most difficult part of the work is to fix the grinding stone on the motor. The fact is that the diameters of the shaft and stone differ from each other, so for their connection, you will need a third subject.. Skunk fit perfectly metal pipe About 20 cm long. At its end, a thread is cut, the length of which is more than the thickness of the grinding stone by 2 times.
It is necessary to cut the threads in the opposite direction of movement of the electric motor shaft. On the other end we attach the shaft with the help of a soldering iron.
For greater reliability, you can drill at the connection point hole and tighten the bolt there and nut. Alternately, you screw the flange on the threads two pairs of nuts and the washers, and in the end we spin the lock nut.
Fix the engine on the stand. The stand can serve as an old table and a piece of thick board. For fixing, you can use fasteners from the same washing machine from which the engine was seized.
Turning machine
The power of the old engine is enough for slow processing of cylindrical billet . To rid a motor from lateral loads, You can attach to it.
Drum grinding
It is manufactured using a large wooden cylinder with a steel bar in the center. The ends of the rod are connected to the cartridge of the motor and the bearing stand.
Concrete mixer
Old washer, or "barrels", easily turn into compact and practical concrete mixer. For this:
- Take out an activator from the machine.
- Cut from sheets Steel 4-5 mm thick blanks for the manufacture of blades.
- Weld a pair of P-shaped blades, connected at right angles.
- Weld them in place Activator.
Homemade concrete mixer earn after you connect the engine From the washing machine to the power grid. If the machine is used to work with small volumes of building materials, then the power of the old engine is quite enough. For large volumes it is recommended to connect a more powerful motor.
Cormor
For the manufacture of corrosion-grain mills, the "barrel" housing will be required and the engine from the machine machine:
- At the bottom of the housing create a hole, Through which the finished feed will go.
- Similar to concrete mixer create blades with knives. You need to choose suitable size for them: a slight distance should remain between them and the edges of the case.
- Install the blades: One at the bottom of the housing, and the other - at a distance of 0.5 meters from its tops. To achieve greater performance, homemakes are recommended to use a separate shaft for each blade so that they rotate in opposite directions.
- Remains only cut on a lidThrough which we will fall asleep raw materials.
Lawn mower
Let us turn to more complex and extravagant designs. The first on our list is a lawn mower. Having made a self-made lawn mower, you will save a huge amount of financial resources, because these simple cars are quite expensive. If you do everything right, then the homemade lawn mower from the engine from a washing machine will not give way to the instruments standing on store shelves.
To begin with, we will understand which materials and tools we need:
- collector motor;
- compact, but durable wheels. Such can be removed from wheelchairs, toy machines. If so are not at hand, cut the wheels from the plastic profile;
- for the base, the thick piece of steel or the usual saucepan lid;
- knives, discs;
- metal pipe;
- steel corners;
- copper wire, fork;
- switch;
- fasteners;
- rozhkov, end, keys;
- welding machine, Bulgarian;
- a hammer;
- drill, screwdriver, pliers;
- soldering iron.
Getting to work:
- In the center of the foundation cut the hole For shaft of a motor. We install it with the shaft down.
- Attach earlier made bushing On the shaft, and on it is secure a disk (knife).
- From the corners we collect a frame for a motor.
- We weld the handle, fix the switch to it
- Connect the engine to power supply.
be careful: Unlike factory appliances, the wires of our self-made lawn mower are not isolated. It is strictly recommended to use such a device during rain or for cutting wet grass.
If you still want your machine to be operated in any weather, it is securely insulating the wires, and for the device collect a little casing from waterproof material. Metal bowl is suitable as a casing.
Generator
Tired of unexpected power outages? Want to create Backup power supplywhich will help you at the right moment? So why not create a generator from the engine from the washing machine with your own hands? The assembly process is quite complicated, but the result is worth it.
The basis for the future generator will serve asynchronous motor. Before creating a generator, do some preparatory steps:
- We disassemble the motor housing. With the help of a lathe, we make a cut on its core with a depth of 2 mm.
- In advance prepared grooves on the core Insert neodymium magnets.
- Create a pattern for fastening magnets from a tin strip. Metim on it placing two rows of magnets.
The size of the band should match the accuracy with the sizes of the core: the tin must be tightly on it.
Preparation is completed, proceeding to the assembly itself. We will need:
- sandpaper;
- cold welding;
- glue;
- rectifier;
- tester;
- battery;
- charge controller.
The sequence of assembly is as follows:
- Glue pattern on motor. On the very same pattern glue magnets.
- Please note that the distance and the angle between magnets do not change. In the opposite case, the voltage changes, a reduction in power or its complete inoperability.
- Free space between magnets Filled with cold welding.
- Go to grinding the surface of the engine.
- Search for a working winding with a tester. We leave its wires, and everyone else is removed. We skip the wires through the rectifier. Connect their ends to the controller. The controller connects with the battery.
The homemade generator from the engine washing machine is ready to use. Equipment, screwdriver, or other similar tools fit the device. Such a generator, of course, will not be able to provide electricity to your residential area, but it is quite suitable for lighting a pair of rooms or the work of several types of type tV, refrigerator, computer.
Useful video
As you can see, the range of use of the spare parts of the old washing machine is quite large. So what are you waiting for? Ty the second life in served his time washing machine.
The time comes when "home assistant" correctly serving you for many years breaking, and it is already impractical to correct it. There is a need to buy a new washing machine, and what to do with the old? You can carry it on the garbage, but it will be an incomplete, impractical person, because there are so many useful things in the washer that can serve a good service. Let's talk about the use of the engine and other details of the washing machine in the farm. We hope you change your mind throwing out your old car.
What parts can be adjusted?
Everyone knows that the washing machine automatic is a complex household appliance, consisting of a fairly large number of elements and the more modern automatic machine, the more in it all sorts of details. About, you can read in one of the articles of our site. If you have a survey of people on the street, it will probably be like that of each tenth in the garage, a barn, the old Washing machine is kept in the country, which it seems to be sorry, at the same time, and it is not known what to do with it. Which parts old car can be adapted for business? 
- El. engine. If an old machine has an email. Engine, then this is in itself treasure. Gently remove it from the housing, disconnecting all the wires, wipe, wrap in a rag and remove in a safe place.
- Drum. The drum of the washing machine machine is made of high-quality stainless steel, its applications have a mass, so it should also be pulled out from the case and save.
- Luke cover. Also a fairly useful thing, and not only the lid itself, but also its details come in handy.
- Legs, clamps, hoses, email. wiring. All this can come in handy anywhere.
- Springs and counterweight. Springs on typewriters play the role of shock absorbers, they are very powerful, and counterweight are good because they are heavy, but compact - we leave both.
- The body of the washing machine. After extracting the entire useful, return to the walls of the machine, the housing itself can also be useful.
Important! If you are not alien to work with electronics, you can leave the control unit. There are many semiconductor elements on the control board that can be used for the repair of electrical appliances and for the manufacture of household useful things.
Why apply the engine engine and how to connect it?
Worker The engine from the washing machine machine or semiautomatic can be the basis for very necessary in household devices. The most common application is email. Emery for sharpening knives, tools, drills and other things. Make such an emery is not very simple, but still possible. The first and main problem is how to fix the grinding stone on the engine shaft.
The diameter of the hole of the grinding stone, as a rule, does not correspond to the diameter of the e-shaft. Engine from washing machine. It means that it is necessary to make a flange, which would be pressed on the shaft on one side, and on the other hand there was a thread so that you can wear and fix the grinding circle. Professional masters are recommended to adapt as a flange of a string pipe by 32 mm. What do you do?
- We take a string of a steel pipe by 32 mm. The pruning length must be cm 15-20, not much longer.
- At one end, the trimming of the pipe must be cut into the thread, the thread length should be at least 2 times higher than the thickness of the grinding circle.
Very important! The thread is mandatory cut into the opposite side of the rotation of the VAL EL. Engine. In other words, if Val El. The engine rotates along the clockwise arrow, it means that they make a thread counterclockwise, otherwise the grinding stone will fly.
- Heat the soldering lamp The other end of the pipe cutting and press it on the shaft, after the pipe cools it firmly connects with the shaft. To strengthen the connection, you can drill the junction point of the pipe with the engine shaft across and screw into the bolt hole, tighten the nut. If there is welding, you can grab the flange to shaft - it will be perfect.
- Now we take three suitable nuts and two corresponding washers. Hour first nut on the flange until the thread does not end. Next, we dress the washer, then the grinder, then the washer and the nut again. All tighten well and in the end we screw the lock nut.
The main thing was done, now our task consolidate the engine so reliably as possible. Look, what holes for fasteners are on email. Engine, here everything is individually, based on this, make a stand. The simplest thing is to twist the stand from small corners, and then fasten the emery on the workbench.
Note! To install the engine on the workbench, you can use the bracket from the washing machine, on some automatic machines Install good fasteners that can be used.
Another responsible step of work on the manufacture of sandpaper is the connection of email. Engine to the power grid. Consider the simplest option.
- We take a multimeter and check the wiring-conclusions of the motor.
- We need the output of the working winding. To detect it, you need to perform measurements of resistance if the device on one of the conclusions will show a value close to 12 ohms, which means that there is a working output.
- We connect the working output to the power grid (220V).
- Without a starting device, our emotion will not start even after we have connected it to the network, so that the emery began to rotate it, it is necessary to turn the hand with force. Act carefully, and your hand will replace the starting device.
There are also options for using an electric motor from a washing machine, but the principle of use is exactly the same. It is put on small homemade grainworks and grass grinders, household concrete mixers and even small sawmills. To describe the nuances of the manufacture of each electrical appliance, we will not, draw analogies on your own.
How to use drum?
Stainless steel drum is a great durable item, from which you can make a lot. What self-made can be made with your own handwritten drums? On the Internet, a lot can you find a video about how people make from the brazier of the brazier for a barbecue, as well as skewers. Indeed, the thing is gorgeous, but do nothing to make it.
- I pull out the drum from the washing machine housing along with the pulley and the shaft.
- We put the drum right on the wheel with a hatch up, here you have an improvised brazier.
- You can cut the front of the tank with a grinder (near the hatch) to expand the working part of the brazier. Also in it will be convenient to lay firewood.
For your information! The barbecue from the drum is perfect, because the drum is dressed with a huge number of small holes, through which the air evenly enters the coal to the coal and ensuring the necessary heat.
Also on the network there is a lot of video about how from the drum to make a small smokehouse. A very interesting and practical option of using the drum, which we tried themselves and with pleasure to share experiences. How is smoking?
More craftsmen make the washing machine and futuristic lampshades for chandeliers from the drum. Puff make easy. We take a pillow, cut the square from the chipboard, corresponding to the size of the pillow taken. You feed the pillow to the chipboard with a furniture stapler. Next, we take the simplest card loop, screw on one side to the chipboard with a pillow, and on the other to the top of the wall of the drum. We have a pouf with a folding lid, and you can store small things inside the pouf.
You can arrange a pouf. You can color the outer walls of the drum with paints. The photo and video on the Internet presents a lot of options, how to do it. You can also not be fused and cover the outer frame of the roasting fabric.
For your information! Buffers from the drum of the washing machine are quite strong and will serve you for many years.
To make a futuristic lampshade in a nursery, you need to do the following:
- from a large piece of textolite (or other non-combustible material that does not conduct electricity), cut the circle in the size of the drum hatch;
- bulgarian cut off the bottom of the drum;
- cut in a circle of the textolite hole for the cartridge and hook;
- insert the cartridge in the circle from the textolite and hang it on the hook;
- reliably secure a circle from the textolite to the drum on the bolts so that the circle completely covered the hatch;
- the drum with the cartridge is hanging under the ceiling, now we screw the light bulb (through a pre-cut bottom of the drum) and admire the result of the work.
What self-made self-made do not make people from the drum of the washing machine with their own hands. We listed and described only a small part. The drum adapts as a container for washing mushrooms and fruits grown in the garden. It is very convenient, you put vegetables in the drum, pour water from the hose through the hatch, and the water along with the mud through the holes is poured out. At the exit, vegetables or mushrooms are clean.
Also, the drum can be used as a container for seedlings or shrub growth limit and perennial plants. With repentance it is clear, we will not explain, but we will talk about the limiter more. Some shrub plants that summer residents like to plant on their site, have a property of growing losses (raspberries, honeysuckle, bearing). So, if you pour in the drum from a washing machine with a black thing, and put it in it, for example, a raspberry bush, then bury the drum into the ground, the raspberry can not sprawle on the site.
There are other options for using a washing machine drum. The main thing to include your fantasy, not to be lazy to do something with your own hands, and perhaps you will become one of the authors of the new homemade, created from the drum serving the washing machine.
How to apply a hatch door?
We made sure that you can do a lot from the motor and drum of the washing machine, but how to apply the remaining parts, such as the hatch door. There is nothing easier. The door of the hatch of the washing machine with horizontal loading is very durable, and it is easily removed. She can find the most different application.
Important! The difficulty of setting the hatch cover on the booth or the window of the steam room with their own hands is to properly mount the lock so that the locking hook is tightly entered.
Legs, clamps, counterweight and other useful little things
In which homemakes can the legs of the washing machine can be used? The legs of the washer are good because they are very durable and they can be adjusted in height. Screw them to a severe piece of furniture, such as a closet with clothes and you can make it higher or lower. If you screw the legs from the washer to the workbench, you can adjust it in height, which will make the work more convenient.
Clamps and wiring can be used in the process of repairing electrical appliances with their own hands. Those who are not alien to work with a multimeter and a soldering iron will necessarily use this smallest. Counterweights can also be used. In the old washing machines, the counterweight was carried out mainly of the cast iron, they can be passed into the pit, but it is possible to use the farm. For example, in order to press the cabbage container during the salting, by the way, the concrete counterweight is suitable for these purposes, it is small enough and heavy enough.
Summing up, we note, some details of the "tagged" washing machine can be applied to create things in the farm. This applies not only to the motor, but also a drum, hatch, wiring, clamps, counterweights, and the hull itself. If you have time and the desire to give the part of the old washing machine to the second life, do it, the forces spent will pay off.
