Silicone-based lubricant is a universal means of protecting car rubber products. In the course of its application, the operational service life of many elements performing decorative and sealing functions is significantly increasing.
Because of its universal properties, silicone lubricants for cars can be used almost on all and plastic chemical properties of silicone have excellent water-repellent characteristics and prevent the possibility of mechanical damage to one or another part. The working temperature range means is from minus 50 to plus 250 degrees. Regardless of temperature, the viscosity of silicone lubrication does not change. This makes it possible to apply it as in winterTo protect against the faceting of seals to body elements, and in summer - from the drying and destruction of rubber parts.
Varieties
Silicone lubricants have different types of performance, each of which is designed for certain works and materials. At the moment, several species are presented in the automotive market: aerosol lubricant, in liquid form, gels, plastic mixtures and pastes.
Each type has its advantages and disadvantages, a method of application and caution.
For example, aerosol lubricants are most convenient in terms of application, but the likelihood is great, that when applying silicone to the surface of the processed section, the tool will enter the adjacent parts that do not need to be processed. Spraying is carried out under the action of high pressure, therefore it is possible to hit it on clothes, upholstery of the cabin, chairs, glasses and plastic. If you do not immediately clean the evaporated surfaces - fat spots appear.
At a certain point, the lubricant in the form of a gel or pasta can be much more convenient to use than spray. Pre-applying a means of this type on a napkin or a rag, you can easily and efficiently treat the rubber door seal, while not stinging other surfaces of the car. The disadvantages of this species include the inability to process surfaces in hard-to-reach places vehicle. With the help of a paste or gel, it is very difficult to lubricate door locks and loops.
Application area
The use of silicone lubrication in the car has a wide range.
Almost all driving mechanisms and friction surfaces, rubber and plastic elements of the cabin and upholstery, as well as external parts of the machine can be treated with silicone protective agents.
Doors
To prevent the appearance of microcracks and wear in sealing rubber elements, the doors should periodically process them with silicone. The treated seals are ceased to make the sound of a violep on the uneven surfaces of the road and contribute to improving the sealing of the cabin. Also for the doors of the car used for lubricating various moving parts and surfaces.
With the help of such a spray, it is possible to process the landing grooves of lowered side windows. To facilitate the sliding of the hatch in its removal sleds and reduce the load on the drive mechanism, its rubbing surface is also desirable to lubricate, in the future it will extend its life. At the same time, the coating receives additional protection against wear and damage, exposure to moisture and corrosion.
Mechanisms of castles
Regardless of the brands of cars and manufacturers, all of them are equipped with a large number of locking devices. Doors, hood and trunk lid, tank filling plate cover - here is a small list of parts of cars that are equipped with locks. These mechanisms are affected ambient (Water, snow, dust) and mechanical wear. If moisture in the secret of the device in the winter period, it freezes and makes it impossible to open the door or other element equipped with a lock. To prevent of this fact It is recommended to periodically make lubrication of the mentioned mechanisms.
Silicone car will help to cope with the icing of the secret and the locking device as a whole. Given the high penetrating properties and fluidity of such a means, it easily penetrates any hard-to-reach places. Teflon, which is part of, envelops the surface of the parts by an invisible protective layer. It protects them from corrosion and various oxidation. Protective silicone has resistance to salted water, various alkalis and weakly aggressive acids.
Plastic elements
To prevent the occurrence of various extraneous noise, which can come from plastic cards of the car salon and dashboardThe use of this chemical agent is necessary.
Silicone lubricant for the doors of the car perfectly cope with such a task. All lines of contact and joints treated with silicone becomes silent. Also, with the help of the composition, all the surfaces of the plastic elements can be treated, which will give them glosk and thereby change general form Salon.
Suspension elements
Rubber pendant parts are susceptible to the harmful effects of various foreign particles. It may be moisture, sand and dust - when entering the item, they act as which contributes to more rapid wear. In winter, it is also desirable to prevent the influence of aggressive salts and reagents to the suspension to the suspension. Now in the market there are silicone lubricants for cars, designed to protect the metal elements of the body and the chassis of the car from the effects of negative factors that are inevitable during the operation of the vehicle.
Control elements
To extend the service life of various sealing sleeves of control pedals and it is strongly recommended to use silicone lubricants. In this case, aerosol silicone lubricants for cars can be used to process cables. To do this, blend the composition into the protective casing of the cable, using a special thin nozzle, and develop it.
After such processing, the cable will have a good gliding in the casing, and will also be perfectly protected from moisture and dust.
Silicone grease for cars: reviews
After analyzing the reviews of motorists, which at least once used silicone lubricant for car processing, you can make several conclusions:
- The composition does not harm the health of a person, does not have harmful evaporation and in no way damages the skin. Does not contribute to the development of various allergic reactions.
- As a result of the processing, a rather durable protective layer appears, which constraints the effect on the materials of moisture, salts, acids and dust.
- Does not affect and does not change the structure of the materials on which the means is applied.
- The ability to use is regardless of temperature.
- The tool has a fracture resistance.
- The composition can be used as an insulating material, since silicone lubricants for cars do not conduct an electric current.
- Perfectly fixed on almost any surface, be it metal, plastic, glass, rubber or various types of fabrics and leather.
And how much is the silicone grease for the car? Its price is quite accessible and for the pocket of any motorist. The cheapest compositions have the cost of just one dollar (about 80 rubles), and more expensive achieved in the price of ten dollars (800 rubles).
Based on these data, it is safe to note that to maintain the working state of the car and the preservation of its parts simply requires silicone lubricant for the car. Why bring the case until the moment when the repair can do it many times more expensive than preventive measures?
"You have a blowing door!"
At the request "from the door blowing" the search engine will helpfully give a bunch of references to the materials on how to eliminate drafts from the balcony or apartment entrance door, but not from the door of the car. Although the situation when from the door of the car when moving at high speed begins to think, is not uncommon, especially when the warranty period has long been over and the prophylaxis of the Owner did not work.
Responsibility for drafts in the car lies completely on door seals. They are made of porous rubber, the keyword here is porous. By structure, the material is similar to an ordinary sponge for washing dishes, only has a more complex shape. Over time, the rubber loses its elasticity and destroys. This happens for various reasons, but the main two is the destruction of the polymerizer under the action of UV radiation and the destruction in winter from moisture falling into the pores. Another, the third, the reason, more belonging to the coat seals, is the destruction of oil or gasoline particles.
From ultraviolet seals are mechanically protected, as hidden behind the protruding doors. But to protect against water and chemicals, additional measures are required.
In our article, we will show two ways, as best to handle car door seals. More precisely, not even ways, but tools for processing. One of them is a specialized means for rubber care Liqui Moly. Gummi-Pflege. It was designed to satisfy the requirements of concern Vag.Maching vehicles under the brands of Audi and Volkswagen. The second drug is the silicone lubricant LiQui Moly Silicon-Fett. Its main purpose is the lubricant of the moving parts of plastic mechanisms, but for the purposes we declared by us will also be consolidated.
Rubber Care Means Liqui Moly Gummi-Pflege
Let's start with a professional composition. What is its advantage? The WAG concern does not allow the use of a large amount of silicone during the operation of cars due to the fact that silicone, falling onto the paintwork, remains there almost forever. While everything is in order with the car, it does not interfere with anyone. Problems arise if it suddenly need body repair and subsequent painting: silicone residues will provoke the detachment of the new colorful coating. As a result, no guarantee on the LCP does not have to speak. Therefore, the elastic processing recommended by many with the help of silicone aerosol is not an option.
The Liqui Moly Gummi-Pflege means contains the minimum amount of silicone, but apart from it in this composition there are seals and fragrances. The composition itself contributes to the cleansing of rubber and its conservation and neutral to other materials of the car's interior.
Application
Liqui Moly Gummi-Pflege is intended for use as a highly efficient tonic of rubber parts of the car. (Doors, hatch, trunk, etc.). It is recommended to apply both on new details - as a prophylactic agent and on older - to restore elasticity.
For processing sealing rubber, the Liqui Moly Gummi-Pflege rubber care means is applied on a rag or sponge.
The manufacturer describes the action of the composition: Liqui Moly Gummi-Pflege contains active tonic rubber components that carefully purify the rubber parts from contaminants and saturate the surface with active substances that restore the elasticity of rubber.
The use of rubber care products can significantly extend the service life of various kinds of seals, restore the elasticity of worn out parts, which as a result significantly reduces the cost of the vehicle operation.
USING
It is necessary to take a piece of a regular sponge or cloth, apply a little composition and then wipe the seals. In this way, the accumulated dirt is removed, and the gum is covered with a protective composition.
Sealing gummi-pflege with a rag or sponge with a moistened composition of Liqui Moly Gummi-Pflege. At the same time, the dirt is removed from them and the surface is preserved.
It should be noted that the flow rate is very small and, thus, it is enough for several seasons.
At home, the composition is also useful to refresh and clean the window glass and doors. The procedure for actions will be similar to those described above: we take a cloth (sponge), we apply the composition and wipe the surface of the sealing.
Video instructions for the use of a Liqui Moly Gummi-Pflege rubber care agent for processing car door seals.
Articles on the topic:
Treatment of car door seals
Silicone Lubrication Liqui Moly Silicon-Fett
The composition of Liqui Moly Silicon-Fett comes in plastic tubes with a sponge at the end (like on tubes with shoe cream). Thanks to this decision to use it very easily and conveniently. At the same time, the treatment of sealing surfaces is not the main purpose of Liqui Moly Silicon-Fett. Its main task is a lubricant of rubbing surfaces (for example, the guide of the hatch of the roof or the seats). The composition is inert to metal, plastic and rubber, so it can be used in the contact zone of these materials.
Silicone lubricant Liqui Moly Silicon-Fett is made in such a way that a foam applicator is located at the end of the plastic tube.
The lubricant has a consistency of the cream and after squeezing, it is frozen over the surface with a sponge or piece of fabric. Of course, she does not have such good cleansing opportunities, like a means to care for rubber Liqui Moly Gummi-Pflege, but the protective is significantly better. Among other things, this composition protects rubber from ultraviolet radiation.
Silicone lubricant Liqui Moly Silicon-Fett can be applied to a sealing gum using a foam sponge ...
USING
LIQUI MOLY SILICON-FETT lubricant is recommended by the manufacturer to use in various contact zones of plastic and (or) rubber parts - such as the joint of the rubber door seals and the car body, guide seats, hose connections with plastic or rubber elements, etc. The use of the composition eliminates the patterns of contacting surfaces, protects rubber and plastic parts from drying and exposure to ultraviolet.
... But it is precisely for processing door sealing gums that is the most convenient to squeeze the composition of Liqui Moly Silicon-Fett on a rag or sponge.
Then, with the help of a cloth, apply silicone on seals.
The composition has a wide range of operating temperatures, high antifriction properties, good lubricating properties. Using Liqui Moly Silicon-Fett helps quickly and easily lubricate nodes with plastic or rubber elements, which will ensure long service life.
In household conditions, silicone lubricant can also be used to process door seals and windows. You can also process shoes: comprehension gives it water-repellent properties.
Video instructions for the use of Liqui Moly Silicon-Fett silicone lubrication for processing car door seals.
|
|
Surely every motorist experienced a lot of unpleasant sensations when the doors came in winter in his car. We give effective and simple tips: What to do if the door seal on your car is a summary?
Wine everything is moisture, which falls on the surface of the seals - it can be deposited on them in the form of condensate or fly inside after washing. As a result, these gum connect the door with the body, which becomes the cause of such an unpleasant access limitation.
Immediately determine what you do not need to do if you got into such a situation!
These widespread errors can lead to sad and irreparable consequences:
Use hot water.
Apply the power in turning the key.
Lighter to the door of the car.
But knowing, the better lubricate the seals, if you try the doors in the car, you can survive another winter season Without like trouble.
Leather, economical and not very hurrying drivers should consider the following option, which will save gum on the doors in the target and preservation. To do this, you will need to operate according to the following algorithm:
- Make sure the lock functions and is in the open position.
- Repair the ice layer on the hood of the car, which may prevent the opening of the doors. To do this, you can use a special scraper or plastic subject of a suitable form. It is not necessary to show your strength opportunities to keep the car paintwork.
- By slightly pressing and tapping in the corners of the door structure, try to destroy the layer of ice, which was formed on the door seal. Similar actions to do with each door of the car and even with the trunk in the hatchbacks and station wagons.
- If the previous actions did not lead to a positive result, WD-40 or its analogue will come to the rescue. The remedy you choose is applied to sealing gum, which 10 minutes later should soften and fall behind the body.
Prevention of car doors in winter
In order for all the above-described troubles, they do not upset you in winter, it is required to prepare a car to future frosts. This will require lubricate WD-40 Castle or any other analogue. Make it easily - the lubricant is applied to the key, which is then inserted into the keyhole and scrolls with smooth movements. It is better to carry out this procedure at the plus temperature. Also, the lubricant is applied to seals. For these purposes, it is good to use silicone-based tools or again WD-40. In extreme, technical vaseline will suit, but its application will have to repeat several times.
The best option from those presented on russian market It is a polymer silicone grease that is well tolerating low temperatures even during the harsh winter. However, with its absence within reach, you can handle the doors of the car and technical vaseline, although the duration of the effect in this case will be slightly smaller. 
The optimal option is the lubricant, packaged in cans with a spray - it allows you to perform all the necessary procedures in seconds. The Liqui Moly, Hado, Forsters and other manufacturers offer their options for rapid rescue of the car. However, a pasty composition can be applied to the rubber bands of seals, which is sold in small tubes - most often so packaging PMS-200 lubrication russian production. The main advantage that the silicone lubricant has the ability to operate in the temperature range -50 ... + 250 degrees.
In addition, it forms a sufficiently stable polymer film on the surface of the door seals, which retains its properties for 2-3 weeks, which allows you to get rid of the problem of calling for a long time. It is very simple to apply it - especially if we are talking about a specialized lubricant for a car supplied in the form of a spray. However, before its use, it is better to wipe the rubber bands to prevent the formation of small droplets, while freezing capable of damaging seals.
To prevent the face of the doors, the car can be used by special water-repellent compositions that do not contain hazardous components. Such a lubricant is produced by several companies - for example, TurtleWax, Wynn's and others. It includes a small amount of technical silicone, as well as complex polyesters and other organic components that are included in the composition to create a durable film that retains its elasticity for a long time on the surface of the seal.
Apply the composition on the gum doors of the car is very simple because it is produced in the form of a spray. There are also exotic funds that also help to fight with the face of doors. For example, in the extreme north and in other cold regions, bearish either oils are used to prevent restricting access to the car's salon. Such means are effectively coping with freezing, but rarely found on sale and allow you to get the effect of only 1-2 days.
These tools should be applied carefully to prevent them from entering seats and clothing. Silicone has a property of displacement of fluid from any surface to which it is applied. The product under consideration forms a water-repellent film. Silicone lubrication can be applied on gum even immediately after washing.
If you caught good tool, just one grease can protect your car for a month or even to the end of the cold.
Since the cause of the freezing of the doors of the car is water, it must be constantly eliminated. After each washing, carefully wipe the seals. Condensate formation can be avoided if you leave the car open for 5 minutes before parking. During this time, the temperature in the cabin and the street will be the same.
What if the door of the car is still the case?
If the doors of the car were frozen, in no case should you try to tear off their strength or use the oblong item as a lever. To open them, first try to shake them, swaying into the outside within free travel - In most cases, it helps to cope with the situation without damaging seals. In addition, you can try to enter inside through other doors or through the trunk if your car is a hatchback, a wagon or an SUV.
However, after washing, access to the car can be completely blocked, since water falls under all doors at the same time.
In the extreme case, you can pour the slit doors with warm water, but not hot! If nothing helps, fill the two-liter bottle of warm (but not hot!) Water, and then start slowly pouring it into the resulting gap between the door and the body, trying not to wet the seat.
Threw up the fifth part of the bottle, try again to shake the door and check whether the sealant is not lagging behind. When the door is open and you will get access to the car's salon, immediately start the engine and turn on the heater to get rid of the nondes on sealing.
When the car hops, immediately take the paper napkins and carefully wipe off all the rubber bands on the doors of the car. In addition, it will be desirable to lubricate them until the next continuous parking, so as not to face such an unpleasant problem.
The winter season loves to be presented to motorists unexpected and far from pleasant surprises. In severe frosts, the engine may not start, discharge the battery, as well as the cases of freezing door locks, which becomes an overwhelming obstacle to drivers who interfere with it to get into the car's salon.
If personal transport is used daily to go to work, then you need to carefully take care of its trouble-free work, which is complicated in winter cold conditions. To avoid troubles related to the freezing of door mechanisms, you need to think about how to handle the doors of the car in the winter.
Treatment of car lock locks inside
The mechanisms of locking the doors of the machine are made of metal and need periodic maintenance that comes down to normal lubrication. In order to exclude hotels and ensure good operation, door locks inside can be processed:
- special tool "Developer of locks", which is sold in all automotive stores;
- conventional engine oil, which, for sure, is stored in the trunk of your car. This option is appropriate to use if the problem found surprise at a time when there is no possibility to call for a spare parts store;
- silicone lubricant, apply not only to the metal elements of the lock, but also on the door sealing gum, since they, too, as a result of the formation of condensate between the joints of the body parts suffer from sample.
Do not postpone these preventive work for later. It is better to immediately take care of your car and in advance, even before the winter onset, carry out all the necessary procedures. Timely door handling inside will avoid multiple problems.
Treatment of car door locks outside
Special attention should be paid to the maintenance of the door lock outside. This moment should not be overlooked that motorists who do not use the alarm to protect their car, and simply close it on the key.
If the lubricant of the lock was not made in a timely manner, before the start of strong cold weather, it is likely that in the morning, trying to open the door from the key, you will not be able to do this - turn it into one direction. To turn the key in the door hole without any difficulty, it is necessary to take advantage of the well-known WD-40 tool.
WD40.
With its help, the moisture castle formed in the larva will quickly be supplanted, and what happened to the trouble will leave you alone. Abundantly injected the liquid through a special tube into a key hole and wait a few minutes. The result will not wait long for a long time.
Thus, in the absence of sufficient amount of lubrication, the internal elements of the lock becomes less mobile and, ultimately, hone. In this regard, the opening of the door of the car in a frosty winter day can be a challenge difficult to do.
Do not forget about silicone lubricants, special means for "defrosting" of the castle, WD-40 and, in the extreme case, motor oil. It should not be assumed that if in the past you did not have to deal with the problems of this kind, then the trouble will walked you by the side.
You need to be ready and maintaining the car properly, especially if it is used daily for shopping, to work or study. So as not about your doors personal transport, spend its preparation for winter in the offseason. This is the most optimal time for preventive work and eliminate technical flaws.
Video
Instructions for the processing of rubber seals Silicone:
This post is 1 comment.
In order for the winter in winter, there are problems with the opening of the car, it is necessary to prepare for the cold season and lubricate the doors with the optimal composition that prevents the freezing of rubber seals.
Means for grease seals
The main condition for choosing a means is resistance to low temperatures. For lubrication of seals, a special hydrocarbon composition is perfect for preservation of individual parts. In their list - polymer silicone lubricant. It has an indispensable property to carry cold.
Lubricants are designed to protect rubber seals from sample and cracking, improving sealing, heat protection and thermal insulation.
With absence special tools Lubricate gums on the doors can be a technical vaseline, which will have a similar, although not such a long effect. For these purposes, glycerin, softening rubber, preventing cracking and faceting.
Effectively lubricate doors seals will help silicone lubricants with a number of benefits:
- simplicity and versatility of use;
- environmental Safety;
- affordable price;
- antistatic properties preventing accumulation on dust rubber bands;
- repulsion moisture. Considering the ease with which the condensate turns into ice and leads to the formation on the elastic bands of the OloLES, this property is very important in winter.
Silicone lubricants are produced in the form of gels, pastes, liquids, aerosols.
Among the means, the basis for which Silicone is served, the following are popular:
- "Horse". In compliance with operational requirements is not flushed with water, even hot. The disadvantages include a sharp specific smell and the absence of a thin tube, which allows more accurate tool;
- "Eltrans". This Russian development operates in any temperature limits. It has a pleasant smell, leaves a spectacular gleaming layer on seals. Alas, there is also no "nose" for accurate application;
- "Stepup". American means working in the temperature range -50 ° C / + 200 ° C. Increases the wear resistance of the seals, contributes to the repulsion of moisture;
- "BBF". Has properties similar to the previously described means;
- "Hybrid Silicone Lubricant Uni-S". It is necessary to apply it carefully, trying not to affect the glass, because It is difficult to wash;
- "Auto Nanoprotech." In addition to anti-massatorizing properties (up to -80 ° C), the lubricant has an anti-corrosion, moisture-cycle and penetrating effects. With its use, stable operation of seals is improving.
Saving a car from the face of the doors will help the funds from the world-famous car trademarks of Hado, Liqui Moly, Forsters. To maintain the state of seals in the winter period, it is desirable 1 time / 2 weeks to use listed or similar compositions.
Honored popularity in the protection of seals acquired the mastic "Protective-decorative paint", slowing the wear of rubber seals, protecting them from aggressive atmospheric influences and improving their appearance.
Choosing a tool
To determine the type of lubricant, you need to get acquainted with the instructions for use and technical characteristics. Glass seals are better to handle pasta or gel, for the trunk seals, the hood and doors are optimally suitable gel or aerosol.
The quality of the means is determined by the suitability period, as well as the rating of the manufacturer and the cost - low cost, can probably determine improper quality.
Emergency help
There is hardly at least one owner of the car, which is not familiar to the WD-40 tool. Initially, it was designed to remove rust from metal surfaces, today is used as an indispensable lubricant. IN winter time The year the canister with him as an emergency assistant should always be in the trunk.
The lubricant is produced in the aerosol, the cylinder is equipped with a thin tube, which allows you to point it into the most hard-to-reach places, for example, under the seal outside. What is such care? The composition of the product is quite aggressive on plastic and rubber parts, which can cause their damage. But for urgent defrosting of certain moving connections, there is no equal to this spray.
With lubrication WD-40, you can lubricate the locks of the doors in the cold if they frozen. As its cheap infringement analogue, some drivers use ordinary alcohol for this purpose.
1 comment to the record "What to lubricate the gum on the doors of the car in the winter"
Cognitive material. So much usefulness is listed, be sure to remember. Personally, until today, Silicone was sprayed. There were never problems with seals. Doors open easily into any stupus. Thing is truly universal worth of two hundred rubles. Before the onset of cold weather, I process this spray the rubber parts of the car. I do not lie, climb under the car, splashing anthers
Ball supports, shruses, steering cras. After all, it is no secret that the broken boot is the reason for the failure of the listed parts. Before lubricating rubber seals, we definitely wipe them dry. Only then I nano spray. Do not greed, lubricate the handles, loops, guide doors. I recommend to lubricate the grooves for which you move side stool. This will facilitate the life of the windows in severe frosts. I want to note, after washing the vehicle, the rubber lubrication event should be repeated. Anthers are repeatedly lubricated at the same time.
