Transmission oil is a liquid for lubricating mechanical aggregates of the car, namely the gearbox.
Various lubricants are necessary because they control the work and provide a long period of exploitation of the CAT. A certain amount is needed to fill them in the car. How many liters ask. About three liters is poured into it. But remember that overflowing the liquid, you will get the same destructive process for as well as nothing. Lubricants are:
- synthetic;
- semi-synthetic;
- mineral.
For such a car and its checkpoint, it is better to use semi-synthetic oils. They are used for engines that make 3-4 thousand rpm. These are cheap foreign cars or domestic production cars (such as VAZ 2109). This species contributes to the preservation of the gear and makes more resistant to wear. This option is suitable for the checkpoint and will retain it for many years. But the main plus of this species is good quality and a democratic price. For this, it is necessary to replace it every 75,000 km.
Variety of transmission oil on the counter
What volume in the box and how much you need to pour
As they wrote, approximately three liters of transmission fluid will enter the transmission box. How much do you need to pour? It all depends on whether to fully replace or partial. It is recommended to do full. How much to pour into a gearbox with full? To make a new lubricant so that it does not exceed the Max mark and did not undertake the MIN mark. The same rule applies to partial.
The overall shows the maximum and minimum level. - When removing the dipstick from the hole, keep a clean rag in order to immediately wipe it.
- Before checking the level, warm the car, gear shifts 1-2.
- Check the lubrication level before starting the replacement and at the end.
- If there is no probe in the car, remember that the album should reach the lower edge of the oil-free hole, but not lower.
