Many motorists, faced with the faults of the headlight VAZ 2110, the repair of the headlights try to produce independently, so to speak - with their own hands, or improve the work of the headlight, expanding its capabilities.
However, it's not easy to find high-quality optics. Most often, cheap headlamps from China or Taiwan fall on the market.
Especially xenon headlights or lamps. They do not shy the quality of performance, and durability leaves much to be desired, according to the results of tests, they lose standard classic instances.
The price of high-quality illuminators is considerable, however, they serve several times longer. You can make repairs or refine the optics that already exist if you want to save.
This easily can be performed independently, the work does not require special knowledge or additional skills. The headlights for VAZ 2110 differ in technology and manufacturer.
Foreign headlight brands:
- Headlights of Bosch. (contain only reflectors, without focusing lenses)
- Headlights of Kirzhach (There is a focusing lens and reflector)
The most common faults of the front headlights:
- Breakdown hydrocormer, which is practical to replace the electrocorrector;
- Shivering light beam;
- Light beam confined.
Repair of hydrocorrector of headlights VAZ 2110
Correquency The light beam happens quite often, especially when the car trunk is strongly loaded, the light beats directly into the eyes of drivers of cars moving to the meeting. If the reflector dropped, and the adjustment does not work - our instruction will help you repair the hydroger of headlights VAZ 2110, the repair will take quite a bit of time.
VAZ 2110 headlights Kirzhach - repair of hydrocorrect
So:
- We unscrew the headlight fasteners and remove them;
- We disassemble the headlights: carefully remove the glass, then metal clips (6 pieces);
- With the help of a knife, we clean the glass from the sealant;
- Sut the convex profile (in the form of the letter P) on the glass;
- We unscrew the screws (3 of them) from the reverse side;
- Take out a paper reflector;
- Next to the hydrocorographic hole inside the illuminator body there is a spring that you need to remove;
- We produce the same actions with two strokes from plastic from two "turntables" fixing reflector.
To note: the ball of the hydrocorrector is snapped into the grooves from plastic, and the metal bobble is in the second groove. She will stop the adjustment without giving it to unscrew the ones.
If when adjusting the headlights of the hydrocormer, the metal latch will break. The ball will jump out of plastic and then the headlight will "fall";
- Repair will be to replace the broken latch on the gasketwhich will not make it clear to feel that the adjustment rested in the extreme position;
- As a result, the likelihood is great, again to take the corrector;
- The correct solution is to improve the mount by inserting a high-wire globe between the petals of plastic.
For VAZ 2110 Repair of hydrocorgrator headlamps finished. We collect headlights in the reverse disassembly sequence.
Pre-clean the old sealant, then we apply a new one.
The second way of repair
So:
- On adjustment screws, we cut the thread (metric 3);
- Twist them in the illuminator itself, then wear washers;
- We take out plastic fasteners;
- We put on a bar with high-heightened modules located on it;
- We wear from above: the washer, on the puck-spring, on top of the springs another washer. The use of lock nut is recommended;
- Tighten everything;
- Fix the design with anaerobic sealant.
Repair the illuminator without disassembly
You can snap the ball into the plastic at the end of the "turntable" without removing the glass, through the holes of the bulbs on the back of the illuminator:
- Drill the hole strictly opposite the latch at the top of the headlights;
- Insert a screwdriver into the hole;
- Fix the collet on the ball of the corrector;
- We rush the hole we drown;
- Attach on the mounted loop from the furniture cabinet (loop 5-6 percentimeters long, with mounting holes and with a neckline, to which it is attached) to each broken corrector node;
- We bring a canopy into the knob of the adjustment screw;
- We shift the screw so that the rubber found in a narrow place of the canopy;
- Holding the canopy, unscrew the screw until it stops with the effort. So the canopy is recorded, which is required to be located in a horizontal position;
- Electric drill using drill 3mm drill, make a hole at the base of the illuminator where the hole is on the canopy;
- Swirling into the hole shortened screws so as not to take out to the reflector of long-mounted light. This slot fastens the adjustment screw reliably, break again.
Eliminating a piping shake
Many owners of VAZ 2110 discover that when driving a car, there is a shiveness of light. Such a breakdown is more often manifested in the headlights of Kirzch, and in the details of Bosch, such a breakdown rarely occurs.
Cause One: Recreation of the reflector.
To eliminate the shivery of the light, check:
- Is the reflector in place in the latch;
- The presence of thrust of the adjustment bolt;
- Emphasis in the landing deepening of the rod of the hydrocorographic
- Check the feeds of the thread (we change the light bulb and the near);
- The integrity of the tube in the hydrocorrector (it can be pulled out).
The most successful ways to eliminate trembling:
- We replace the hydrocorrector to the electrocorrector;
- Increase the length of the rod of the hydrocorrector to stretch the spring.
This method allows you to get rid of the shivel of the light by dressing the cap on the rod of the hydrocorographic.
Instead of caps apply:
- Plastic dowel, long eight millimeters;
- Cap, filmed from the brake fitting;
- Other plastic cap.
Make this:
- Remove the hydro director itself from the illuminator;
- Tightly dress on the rod corrector cap. The main thing is that the cap does not jump inside;
- Install the corrector in the landing socket
Replacing the headlights of VAZ 2110
Sometimes the headlight requires a replacement entirely.
Work is made without any problems:
- Disconnect the minus terminal from the battery;
- We take out the lining of the radiator;
- Remove the block together with the wires;
- Press the hydrocorrector cylinder latch, we turn it in the direction of the clockwise direction 90 degrees until it stops;
- Get it out of deepening, without disconnecting from hoses;
- We unscrew the bolts that are fastening the headlight (pictures are shown by white arrows), and put forward the headlight itself;
- We shift the lining about four centimeters to the center of the machine so that its hook came out of the fastening with the wing;
- To shift the lining, weakening the tension of the bolts, fastening buffer top, the buffer is pressed forward;
- We press on half the lining to come out of the fastening flange, and get the lining;
- We unscrew the fastening nut on the bottom;
- Turn off the block from the lamp of the rotation pointer, pull the illuminator on yourself and take it out;
- Turn off the screws for disassembling the illuminator;
- On the case of this pointer, we post two hooks from the body of the optics details;
- We collect in order to reverse this and install a headlight assembly.
Congratulations! Replacing the headlights with their own hands is complete if something remains unclear, I recommend watching the video on the request of the VAZ 2110 headlights Repair.
Change the type of optics (tuning)
Autolokers often produce tuning car headlights, improving appearance. A high-quality tuning gives a fashionable look and beauty machine.
If you competently pick up the accessory, the appearance of dozens changes thoroughly. The most popular among motorists is the front headlight tuning in the form of toning.
It is carried out in various ways, practically not affecting brightness and quality lighting road.
Tinting of the front headlights:
- Coloring of the front headlight mask;
- Coloring of glasses;
- Toning glass film.
The process of such tinting is best showing a video.
For those who do not want to paint or tint headlights on their own, there are headlights Prosport. They are sold with black or chrome.
We just need to install them instead of full headlights. Only they can not boast of high quality or bright light.
