Many owners of this car complain about bad light, so the refinement of Kirzhach headlights on the VAZ 2110 will be the possibility of its improvement. Claims from drivers to it a lot, noted bad light of products from Germany, narrow light stream and some other flaws. The establishment of a more powerful lamp position cannot be fixed, so the owners are forced to resort to various tricks.
Once there are problems with optics, alternative offers appear, but their cost is high.
Refinement of Kirzhach headlights on VAZ 2110 It is a real offer to exit the situation. If you spend time looking for offers to improve lighting on this machine, you can find a lot of offers. Let's try and we will help your advice to help drivers to improve the light of the road, which means improve the security of your own and other participants in the movement.
About accessible lighting for dozens
Today, the automotive market is filled with light engineering from various manufacturers, with which you can not only improve the illumination of the roadway, but also to convert the external appearance of the car due to their updated appearance. Most owners stop their choice on the products of two companies. This is the domestic company "Autosvet", the optics of Kirzhach this company receives good reviews, and the German branded from Bosch.
Saying unequivocally which one is better, no one is taken, but about some features of these products it should be said. Optics from the company "Autosvet" is distinguished by a high cost, but it has a built-in lens for the Middle Light lamp. Its presence allows you to focus the light stream, which means to improve the overview of the carriageway. Such headlights are well amenable to numerous versions of tuning. Also for these products there is an installation of xenon on legal grounds.
If to improve the illumination to take the original products from the company Bosch, then it does not have all the above opportunities and advantages. Manufacturers do not produce modifications of this product, but it is somewhat lower than domestic products. The optics from the company Bosch is more contaminated, since its glazing area is more than the domestic headlight.
Let's talk about alteration
For those who are solved on the improvement of lighting, Kirzhach brand products are the most suitable option. They allow several alteration options, and there is also an opportunity to install xenon. Thanks to such rework, the efficiency of the headlight and its light output increases. Having skills to work with a different plumbing tool, you can do this alteration yourself.
In order to begin upgrading these products, you must first dismantle the headlights from the car. Next, it will take full disassembly of the removed optical elements. First of all, it is necessary to gently separate the glass from the headlight housing. It is attached to the body using a special sealant. You need to do such a job carefully not to damage the glass, otherwise you have to buy a new one.
About disassembly
After the complete separation of the glass from the case, the procedure will be approximately:
- Start removing the reflector, for this you need to unscrew several screws;
- Now you can remove the connectors and remove all the wires from the back of the headlight;
- The spring is removed near the hydrocorrector to be able to remove the bed from the case;
- Using scolding, get the module module from the case and conduct full disassembly.
A little about refinement
The purpose of such a transaction can be only one, improving the illumination of the carriageway. Experts split it into several stages, they may be such:.
- Works on the offset of the lens closer to reflectors;
- Shutter refinement;
- Change form for reflector.
How to shift a lens?
This operation is carried out in order to move the lens to reduce its area, which gets illuminated from the lamp. This achieves a change in lenses curvature in a smaller side. This can be done in this way:
- It is necessary to make a complete disassembly of the module and remove the lenses from it. On the estimated new installation site of the module you need to make sections. At this time, it is necessary to closely monitor the position of the curtain, it must constantly be at a distance of 50 mm;
- In the marked place, you need to sprinkle the module and strengthen the lens, for this use previously made cuts, the module at the same time becomes somewhat shorter. It is important to take into account such a moment, the lens is heated, therefore the optimal approximation sizes will be 10 mm.
About the rework of the blinds
It is needed to exclude blinding ahead of riding drivers. To do this, the curtain makes straight. First, the template from the cardboard is cut, then the product from metal is made according to it. The finished product is installed on the module, it can be covered with a foil to better disperse the light flux.
If you wish in different sources, you can find several additions of such rework. The refinement of Kirzhach headlights on the Vaz 2110 also brings moral satisfaction for the owners. Therefore, be attentive and calculated, and everything will turn out.
