It is noteworthy that on the VAZ 2110 replacement of the cooler, the scenes should be carried out in the case when oil leakage from the checkpoint is observed. The replacement of the oscillation of the VAZ 2110 scene can be carried out in two ways, which will be discussed in this article.
One of the ways to replace the cuff cuffs implies the disassembly of the gearbox. The second way is not as cumbersome and is carried out directly by car, without removing the boxes.
Do not say that this method implies knowledge of certain secrets and skills.
Diagnostics
What symptoms indicate that it is time to change the cuffs of the scenes or rod of the gearbox? Most often oil spots and traces remaining on asphalt or other coating, after a long stop of the car and there are those whims.
The experienced driver must notice them in time and make proper conclusions. But not always such spots indicate a problem with casing cuff.
Often the cause of oil leaving becomes, which needs to be checked to avoid errors. Often, this most filter is poorly twisted, as a result of which leakage occurs.
Note. You should not say that it is possible to remove the oil leak from the box in a timely leakage - this is the ability to save an important mechanism of the car. Otherwise, it is not avoided the danger associated with the full leaving of the oil from the gearbox and the replacement of the box, as a result.
Regular check will help avoid problems with leakage. The Level of the PPC oil should be conveniently visible, and the faulty gland makes itself felt both a characteristic crunch that occurs when shifting gear.
Replacing the cuff cuffs
First you need to arm yourself with the necessary set of tools, where includes:
- Set of keys (10, 13);
- Normal sequel or other acute metal object;
- Screwdriver;
- Hook;
- Plastic cork.
The replacement of the gland must be carried out at the disk or overpass pit. If there is no such possibility, then the option with the lift will fit.
In addition, there is another option that implies laying under the car of the two spare tires plafhmy as stops.
Two durable boards are put on them, and the car drives to a homemade flight. Simple and ingenious.
Council. If the motorist drove to a pit or other fixture, he must take care of safety rules. In particular, it is necessary to fix the vehicle using the parking brake for this and the opposite stops.
We start the replacement process:
- It is almost always covered with a special boot from rubber. If the cuff will be faulty, then this most boot will be all in oil, which will once again indicate the need for replacement;
- We do for a wide part of the anther and flexing it;
- We see the cardan, located below;
- Disconnect this most cardan from the rod and lever, thus getting access to the cuff (we use the key to 13);
- The nut turns completely, which allows you to weaken the connection of the cardan and lever;
- The lever is dismantled from the cardan;
- The first either third gear is included;
- Cardan is completely disconnected from the scenes;
- Cardan is removed;
- Now you should dismantle the rubber boot.
Before us appears the cuff itself, which is in some recess. It is here that the sick of the scenes enters and it needs to take out of this deepening.
Note. Remove the cuff out of the rod without using a special tool, almost impossible. Assist in work awl and special hook.
So:
- Shilo and hook we introduce inside and thus remove the cuff (you can use in operation and screws that screw in addition, thereby screwing off the gland, like a corkscrew);
After extracting the old cuff should be replaced:
- Clean the place where a new cuff will be planted;
- We will press the new cuff inside the stock.
Council. It is easier to replace the gland with a plug from any plastic bottle.
A new gland is inserted into the inner part of the plug, which is cut in advance. And then it is inserted.
- The assembly is carried out in reverse order.
That's all. As you can see, no comprehensive instruction represents and everything can be done with your own hands.
In the process of work, you can see a useful video or study the photos - materials. Thus, you can save well.
Yes, and why overpay, if the price for repairs in a hundred is not low today.
