The traffic rules clearly prescribe that it is impossible to go in the dark or in case of insufficient visibility without the included dimensions, both in front and the back of the car. Today we will look at how the dimensions are arranged on the VAZ 2110, which causes the damage to the breakdowns, how to eliminate them.
Purpose
The front dimensions are called head lamps, they are located in the windlight in front of the car on both its parties. They are extreme on the sides in the lighting system, and their name is obliged to be shown by the oncoming vehicles the dimensions of the machine in width.
For sure, the rear dimensions are intended for the same mission, - so that you can see the one who rides next. This is especially true during overtaking, you do not want someone, not seeing real sizes, hurt your "swallow".
Hence the Important Council: If suddenly it happens that you need to go to anything and you find out that the light bulb has blocked in the left dimensions, it is impossible to replace it with a new one due to the lack of such, do not be lazy and rearranged from the right. And how to do it, we will tell.
Device
Head lamps (front dimensions) are part of block headlights. The rear dimensions are included in the rear lamp VAZ 2110, being one of its sections. Nearby is the rear fog, rear headlamp, turning point, cataphoth, braking signal and envelope.
Causes of breakdowns
Causes of faults can be a lot. The most common - lamp burns out, which naturally deprives the ability to include overall lights. Especially unreliable in this respect the lamps delivered to us from the Middle Kingdom.
Although they attract more than a "democratic" price, and in any trading point them in bulk, but the carrots will not be wrapped with them. Therefore, it may be possible to remember the saying that not such we are rich in order to buy cheap things twice.
Good branded light bulbs will serve at times longer, besides, they do not have to change them infinitely.
Sometimes there is a "flashing" of dimensions, or flashing the dashboard lighting when overall lights are turned on. Many are blamed in this relay of dimensions, but they cannot find it. In the carburetor VAZ 2110, the relay of the dimensions does not exist, there are only relays on the distant and low-light light.
For the injector car, the relay should be signed in the mounting unit where all the fuses are located. Moreover, if the relays are burning one after another, you should immediately contact the electrician specialists, because it suggests that there is a closure in the chain somewhere, and hence the burned car nearby.
Never, under any circumstances, should not be replaced by the burnt fuse to more powerful, and even in general - on the "bug".
Repairs
As already mentioned, the movement of the car in the evening or at night is forbidden, if the overall lights do not burn, so we will search for the causes, and then eliminate it.
If you are confident that the paths for which electricity passes are working, first, check if the lamps are not burned. And if they need a replacement, do it.
For the head lamp, the replacement procedure is:
- Open the hood;
- Turn off the battery, and even better - remove it. After all, we are talking about electricity, which is unsafe;
- From the side space, holding the lamp by hand, disconnect the wires directly reaching the light bulb from the block;
- Remove the rubber case;
- Move the Cabok the latch, remove the spring with the hook;
- Take out the light bulb of the dimensions;
- We change it to the new and collect everything again.
When the replacement is made, check whether the head lamps are lit.
