With the appearance of a suspicious whistling on a running motor from the timing belt, it is necessary to diagnose. To do this, we throw off the generator strap and run the engine. If the sound is saved - you need to change the tension roller, well, if you disappear, you will have to figure out how to change the bearings on the VAZ 2110 generator.
Dismantling of the generator from the car
Replacing the Bearings of the VAZ 2110 generator involves removing the part from the car.
First, remove its belt. To remove the belt, you need to loosen the fastening nut and the adjustment bolt.
Removing the belt, run the engine to make sure that the whistle disappeared.
We throw off the terminals from the battery and unscrew the wires.
The generator is removed from below. To unscrew the bottom mount, remove the crankcase protection, you can only its front part.
We disassemble and change
First of all, to replace the bearing of the VAZ 2110 generator, it is necessary to unscrew the pulley, for which we need a screwdriver and a clay curved key.
Remove the casing, pulling off plastic latches
We unscrew and take the brush knot and the voltage regulator in the "one face".
To split the generator, you need to unscrew four bolts.
Before removing the lid - leave the label to collectively collectively.
Rotor threads need to screw the appropriate nut
To successfully pull the rotor from the front bearing in the lid, we take both hands for the ears of the generator and neatly knocking the bore on the nut.
How to change the bearing on the VAZ 2110 generator can be seen from the image. A suitable head (in our case - 27) knock out the old one. Next - carefully lubricate the new one, and with the help of the already removed by pressing it into place. Rolling the edge chisel for reliable fixation.
The rear bearing is removed by a large horn key as a lever, or with a thick screwdriver and hammer.
We score a new bearing in place using a suitable piece of pipe.
After the replacement of the bearing generator of the VAZ 2110 is successfully completed, you can start assembling.
We begin the assembly from the front cover, paying attention to the labels, and then in the reverse order.
