Adjusting the VAZ-2110 door lock. Features of doors and locks.
It is difficult to present a modern car without doors. It is through them that the driver and passengers get access to the salon. At the same time, the path to the vehicle should be closed for unauthorized persons. This function is assigned to one of the door items - the lock.
Long exploitation in various temperature conditions and frequent work can lead to premature failure or disruption of the adjustment of certain elements.
At the same time, the castles of the car may not fully cope with their functions or to work out at all. In such a situation, the car enthusiast must take timely measures to set up and adjust the door lock. Otherwise, one day he himself may not get into his car. But go through or can easily.
Features of doors and locks.
The principle of operation and the design of most locking devices installed on vehicles is practically no different. Of all the locks of the car, only the ignition castle has the greatest reliability. It is he who lasts protects the car from the hijacking after penetrating the attacker inside the cabin. In turn, the doors have to withstand various mechanical impacts day, which inevitably lead to wear. At the same time, some of the motorists normally cares for the doors and locking devices.
What functions do the doors of the car?
There are two of them - protective (preventing entry into the salon of unauthorized persons) and isolating (creating a tightness of the car, to avoid hitting it rain, wind, snow, cold and so on). To increase the service life, all metal parts of the doors must be treated with special anti-corrosion compositions. This avoids the late emergence of corrosion on the metal and its destruction.
When to adjust door locks?
As we said, door locks are one of the most responsible knots of the car. In the absence of alarm and remote control of the CZZ, this element has to withstand constant loads. To prevent the lock failure and ensure its quality work, it is necessary to make it adjustment from time to time.
The reasons for the impairment of the lock can be somewhat - an inaccient handling of the lock (for example, coarse keying), the effect of adverse natural impacts, natural wear (long-term operation of the car). In addition, when trying toft, the car lock system can also be broken. In such a situation, adjustment or complete replacement of the larvae is often needed.
Let's start with the fact that all adjustment work can be carried out without dismantling the door, which significantly simplifies the procedures. Consequently, choose to configure any convenient place - the main thing is that there is enough light, and also enough spaces for the full opening of the door and normal move around it. Best if the adjustment is made on the open area.
The sequence of actions is as follows:
First, make sure that the car doors are closed normally and it does not interfere with them. It often happens that the castle does not work precisely because of the incomplete door attendance;
If the doors are not closed or to perform these actions it is necessary to apply excessive efforts, then lift the fixing screws of the fixing element;
After unscrewing the screws, move the retainer to the outside and tight all the nuts tightly. Make sure that the locking design does not shift;
Watch the process of closing the door. If at the time of the "groove" at the time of the "groove", as it were, "bounces" up, the lock is worth a little lower. After that, check the closing clarity again;
If the door, on the contrary, is desirable, the locking element is desirable to unscrew and lower the locking item.
We do not just do all these works. The adjustment of the lock largely depends on the position of the retainer itself. In 90% of cases, such problems are solved precisely by correct installation of the element mentioned above. The castles themselves fail less closely. If the breakdown happens, then here the only way out is replacement.
The castle is not only on the front doors of the car, but also on the trunk. If the luggage compartment cover has become loosely close, it does not close at all or requires much effort, then without high-quality adjustment it is not necessary:
Remove the lock casing from the inside so that you can adjust and get to the fixing screws of the fixing device;
Out the fastening screws and shift the lock in the required direction (left or right, up or down);
Twist screws;
Check the quality of the work done. Ideally, the lid should be closed from the light "cotton" and a little effort from the motorist.
Perform the mentioned manipulations until the lock is clearly closed and securely fix the door of the luggage compartment. After the adjustment is completed, make sure to twist the fastening nut;
Check that the lock and the lock latch are well docked with each other. If this does not happen, then the locking bolts must be slightly lighted and shifting the retainer in any of the directions. In this case will have to be eye;
The final stage is the final check of the quality of the trunk closing. If everything is clearly, you can safely be proud of yourself. If not, then repeat the adjustment until the result is the achievement of the expected result;
Stretch all the bolts and process the locks with silicone lubrication.
If the lock itself is faulty in the door (for example, the key is not inserted, there is a clear mechanical damage) Replace the larva. For this:
Remove the upholstery on the door;
Unscrew the screwdriver from the cylinder;
Remove the lock plate;
Call the castle cylinder and put a new one;
Return everything to the place.
Castle adjustment on VAZ-2110 will take you not more than 20-30 minutes. The outcome of the work - all the doors will be clearly closed from easy effort, and locks - perform their function. And how to pass a legally technical inspection of any car can be found.
|
|
