In this article, in an affordable form and using the photo, it is described how to properly put the windows on the VAZ 2107. Some features of the adjustment of individual electrical units of this car brand are also described.
Very many car owners are quite often faced with a very unpleasant problem - the rise is difficult and lowering the side glass, especially its rise. At the same time, the window lifter is published by a rather unpleasant characteristic creak.
All this suggests that the mechanism of the lifting was worn out and requires repair. And in some cases it may be necessary and replaced.
In order to save money, this repair can be successfully done with your own hands. For this, besides perseverance and desire, it is necessary to know the device of the lifting mechanism and have proper conditions for performing work.
VAZ 2107 Lift Lift Device
- Glass lift handle.
- Facing sleeve with landing groove for the lift handle.
- Lift knob socket.
- Star mechanism of glass lifting.
- Clips top.
- Screw for fastening pressing plates.
- Pressing plates.
- Fixing glass brackets.
- Cable.
- Roller bottom.
- Bolt and nut fastening of the bottom roller.
- Tension roller.
The main difference in the design of the VAZ 2107 lift from other classics models is that in this embodiment, the lifting mechanism has a fourth additional roller for tensioning the cable. Such a technical solution arose as a result of the fact that the side glass of this model has a solid one-piece design.
That is, there is no, the so-called vehicle.
Dismantling of the glass on VAZ 2107
Many new-night motorists put the task in a dead end - how to install 2107. For this, it is necessary first of all to learn to disassemble this mechanism.
Below, the next instruction will help you with solving this task.
Disassembly is performed in this order:
- First of all, it is necessary to lower the glass down until it stops.
- Next you need to remove the handle of the glass lift. To do this, it is necessary to disconnect the locking split washer that is between the handle and the facing sleeve.
This procedure is performed using a flat screwdriver, with which the dried edges of the washer are moved and then the washer is output from the engagement. - Then remove the decorative lining on the door and thereby get access to the technological work in the door.
- R10 key turnip the tension roller fastening bolt, but do it not to the end. Mixing the tensioning roller, weakening the tension of the cable.
- Remove the cable from the rollers.
- R8 key unscrewing the nuts of the lifting mechanism. Their 3 pieces.
- Then, through the technological opening in the door, carrying out the mechanism.
Note: The cable ends, in the place where they enter the mechanism itself, must be fixed with wire. It will help it very much when installing the lift.
Installation of electric lifts glass on VAZ 2107
It should be noted that the automotive industry does not stand still and is constantly evolving. Talented engineers are quite often pleased with technical innovations.
To one of such new products, until recently, the electric drive of the glass lifting mechanism. With the advent of this device, the owners of the "seven" were very relevant to the question of how to set 2107.
Today there are a lot of such devices of various brands and brands, both domestic and foreign manufacturers. The domestic representatives of this appointment of aggregates are, for example, such as Katran, Forward and Granat.
However, when installing an electric lifting on VAZ 2107, there is a certain problem. The fact is that the glass of this model is lowered along the entire length of the door (there is no rotary forward in this design) and, for the installation of the above-mentioned lift models, very little space.
There is still a way out of this situation. The "seven" is quite suitable for the lift of foreign production of SPAL. In this case, the Delux model has proven quite well.
Of course, the price of this model leaves much to be desired, but it is worth it.
Installation as follows:
- First, it is necessary to thoroughly explore the instructions.
- Then, for the safety of work, disconnect the wires from the battery terminals.
- Next, it is necessary to raise the glass up to the stop and consolidate it with a scotch.
- Then remove the old mechanical lift.
- Select a place and, according to the instructions, install the electric motor.
- We put the cable to the regular place.
- Next, you need to prepare the seating holes for the buttons of the inclusion of the lift. The most convenient places will be the door handle and the instrument panel.
- In accordance with the scheme provided in the instructions, connect the electric pipe.
- Install the connected buttons to your locations.
Replacing it. Next, you must connect the necessary wires to the battery terminals and check the performance of the new device.
Below is a video that will allow you to visually explore some problems that occur when installing the lift.
How to adjust the wiper pauses on the VAZ 2107
The whole point of this adjustment is to increase the pauses in the operating modes of the cleaner. With continuous mode of operation of this device, the pause between the wave is 1 second.
In the intermittent mode, 4 swords and a pause between them are produced 4 seconds. Practice shows that in such parameters of this device there is no particular need.
However, they can lead to premature wear of the parts of the aggregate. It is in order to increase the service life of the mechanism, the pause of the wiper VAZ 2107 is adjusted.
The most optimal option of the cleaner is considered the following:
- The pause between wave in continuous mode should be 2 seconds.
- The number of crackles in the intermittent mode - 2 times.
- In the intermittent mode, the pause should be - 20 seconds.
These adjustment installations are also beneficial to the condition of windshield. With minimal pauses, glass does not have time to wet, and the brushes work almost on the dry surface.
As a result, stained stripes and scratches appear on the glass. Increasing the pause in the operating modes of the cleaner will avoid this problem.
In order to be able to adjust the operating modes of the cleaner, it is necessary to perform some changes and additions in its electrical circuit. For example, if you enable a variable resistor into the power circuit, then the pause can be handled "manually" and set its value at its discretion.
However, not all motorists are well versed in electrical stamps and have the necessary skills to perform these works. In this case, a very good solution is proposed for solving this task.
You can install the relay 63.3777. It is designed to work by car VAZ 2107.
This device has the following advantages:
- The relay allows you to change the pause between the brushes wave in the range of 1 - 70 seconds. The driver independently determines the size of the pause, depending on the contamination of the car glass.
- When installing this relay, there is no need to replace wiring.
- No need to make any additions and changes in the design of the front panel of the car.
- Each product includes a detailed instructions for installing and operating this device. Following this instruction, the driver can independently install the relay and do not resort to the services of the service center.
In conclusion, we note that the installation of this relay will allow you not only to increase the service life of the cleaner mechanism, maintain the normal state of the windshield and brushes. It will allow you to expand the possibility of using various tuning services.
