Silent door locks on VAZ 2109 today put many drivers. Staten castles of these cars, as you know, make an unpleasant metal clang.
Silent door locks of VAZ 2109 are mostly on cars with considerable mileage, as on a relatively new such problem, like a metal clay, not so noticeable.
Silent castles
It can be said that this sound has become a problem lately when the driver got the opportunity to compare his car with a foreign car or even with the current products of AvtoVAZ plant. The latest advanced methods borrowed from various car production concerns allow you to fully upgrade the old castle.
Note. On foreign cars, for example, a locking lock is covered with a wear-resistant material. Often, polyurethane is in the role of such a material. The castle itself is hidden inside the door, and on the "nine", "eight" or other old models of VAZ, it is outside.
This most "naked" clang of metal is issued on contact with the door components with an outdoor lock. Today it is not necessary to change the entire door system to make yourself.
Domestic manufacturers began to produce silent locks in our days with the right bolts. Such structures are ideal for VAZ 2109 and do not look here or there.
You can find locks from different manufacturers, optionally domestic on sale. Included, there are always silent bolts and insert from polyurethane.
Council. If there are no bolts with a silent lock because of something complete with a silent lock, everything can be fixed. They are available today in free sale.
Replacement process
To begin with, we arma with the necessary tools:
- A shock screwdriver that will allow you to unscrew and spin bolts (they are very firmly fixed and a simple screwdriver here will not be placed).
- The ratchet key with a suitable bat. This tool will need for a peculiar lever.
Begin:
- You unscrew the bolt, and in its place we put the stud, which will keep the old castle from falling inside.
- Old castle dismantle.
- We set a silent lock on this place.
Note. Bolts will need to tighten with the maximum effort. You will need to do with a shock screwdriver. If special silent bolts are used, they will also need to be trusted with a shock screwdriver, to get harder to unscrew.
Adjustment
After installing silent locks, you will surely need adjustment.
It will be necessary to conduct it as follows:
- Change the position of the retainer, which is responsible for adjusting the door of the car.
- Check how the door closes. If too tight, the screw mounting screws are weakened. It will be necessary to shift them out and reinstate.
- On the contrary, if the door closes weakly, you need this most retainer to shift inside.
Note. By adjusting the door that closes weakly, it is necessary to ensure that the door stood as it should, and not hung or performed.
- If when it is closed, it is lowered, the retainer is recommended to lift.
- If the door when closing the opposite is raised, the retainer is lowered.
Note. In order not to break the adjustment of the retainer, it is recommended to establish a diagrade from a special waterproof material.
Castle refinement
Silent lock, it turns out, can be done even quieter. As you know, any design can be improved. No exception in this regard and such a castle.
The first version of the refinement of a silent castle
To perform this work, you will need the following tools and components:
- Screwdriver.
- Good glue, can come up and moment.
- A sharp knife.
- Sealer.
- Litol.
Let's proceed:
- Castle disassemble.
- A spring is pulled out of the castle.
- Then you need to cut a piece of seal and glue inside a silent castle.
- We collect everything back.
Second version of refinement
So:
- It will be necessary to disassemble.
- Now soften the punch when declining.
- Alcohol degrease the surface.
- From the damping material, cut out the strip of a suitable width.
- Insert it and glue, clamping from the inside with a screwdriver.
- Excess materials cut off the blade.
Third version of refinement
So:
- Again, you need to remove the springs.
- A large spring from an old ordinary castle is put in place new.
Note. You can leave your springs that differ from the springs of a conventional lock softness. But in this case, you will have to the spring, cut off the small part.
In the process of holding work with your own hands, it is extremely recommended to study more photos and video materials. It does not prevent a step-by-step instruction from other sources to compare the process and obtaining a practical understanding.
The price of such tuning is always high in specialized workshops and therefore will be relevant to learn everything to do it yourself, the more I do not have anything impossible.
