To the same topic you can attribute several other questions that I ask: "Without a key", "Open the Hood Ford Focus 1", "How to open the hood ford Mondeo"," As on Ford "and so on. I'll show you on the example of your focus 2 ...
How to open the hood ff2
Ford Focus 2 hood opens ignition key. There is no cable here, and it's not possible to open it from the salon (at least in this configuration). To begin with, we will understand how the Castle of the Ford Focus Castle works, in particular - the Castle of the Ford Focus 1 and the Ford Focus Castle 2.
How to open the hood Ford
As we can see in the photo above, you need to insert the hood ignition key into the lock cell under the Ford branded icon on the radiator grille to rotate up-left. After inserting the key, as indicated on the instructions (in the photo it can be seen), we turn it first counterclockwise (left) to the floor of the turnover, while pulling the hood up, and immediately turn the key to half a turn clockwise (right) - the hood is open.
We look at the photo above. As the radiator grille is far from the hood lock itself, while we are twist the key, we turn this (red arrow) craving, which, in fact, opens the castle. As a rule, the larva of the hood castle breaks. People tend to immediately run with a cry - broke the hood lock, buy the castle of the hood Ford Focus! But, breaking, neither the castle, nor the traction is broken, this thrust (in the photo above) just jumps out of the groove.
But do not worry! The hood can be opened manually by inserting craving into place and tugging this traction from the bottom of the car, prevailing the engine prevailing (see two photos below)
How to open the hood Ford
Or… Thread through the radiator grille a long flat screwdriver and turn it the same way as the key is done.
How to open the hood Ford focus outside
And the hood is open! As a rule, the locking mustache of the cardanchik's socket, which you see in the photo above are broken or breaking. And the cardanchik already jumps out of his place at every turn of the key and attempt to open the hood. To do this, change the larva of the castle, or insert the cardanchik in place and wrap the tape, and even better - to solder the cardan and the larch.
The content of the article:
How to open a hood Ford Focus. Ford Fokus has a hood locking on the lock, which is not so easy to open without the initial information.
How to open a hood Ford. As we can see in the photo above, you need to insert the hood ignition key into the lock cell under the Ford branded icon on the radiator grille to rotate up-left. Ford Focus. history.
Curious!In all his history, the company's logo varied 8 times, while the name of the Ford never disappeared from the emblem.
The Ford Focus car is equipped with a locking on the castle hood. The opening procedure in some way is original and in the absence of initial information is difficult.
Heat the scum over the flame and try to drown a hot tip in a plastic latch. Or rusted, or just did it fall off, although it can and something else. Home Consultation with the author. Next, you need to perform the following: one of the most common faults of this mechanism on Ford Focus is the situation when the thrust pops out from the groove.
How to open the hood for Ford Focus 2
There is no cable here, and it is not possible to open it from the salon at least in this configuration. After inserting the key, as indicated on the instructions in the photo can be seen, we turn it first counterclockwise to the left to the floor of the turn, while pulling the hood up, and immediately turn the key to half a turn clockwise to the right - the hood is open.
Since the radiator grille is far from the hood lock itself, while we twist the key, we turn this red craving arrow, which, in fact, opens the lock. As a rule, the larva of the hood castle breaks. People tend to immediately run with a cry - broke the hood lock, buy the castle of the hood Ford Focus! But, breaking, neither the castle, nor the traction is broken, this pull in the photo above just jumps out of the groove. As a rule, the locking mustache of the cardanchik's socket, which you see in the photo above are broken or breaking.
And the cardanchik already jumps out of his place at every turn of the key and attempt to open the hood. To do this, change the larva of the castle, or insert the cardanchik in place and wrap the tape, and even better - to solder the cardan and the larch.
Then I found info how to open with a scolder, put it on top of this cable and pressed it hard on a white core, and Comrade at that moment turned the key. The hood opened, the mechanism collected, everything worked ... until recently. Again the same story, only now the dumping does not help: he has suffered, friends too - everything is not going. I found the topic as a peasant with a split screwdriver, the same white core is delivered and then this turnover serves as a key. Only no one says how before this I shot this cable craving, that would then go there right in the center.
I pulled this cable on the nerves, he sorted into two halves: the upper rubber part remains from the key side, and from the motor side - iron middle. As the author came across the kardanchik, who had jumped out of the groove, and to his surprise, he found an even easier way to break the hood without a key. In the picture, where the inserted screwdriver is shown, a protective plastic grille is clearly visible.
This grill can be bare hands and without damage to partially pull out of its fastening grooves, and then, traveled to the reduction of the slot between the case of the machine and this grid, to turn the hand or hand and insert the cardan in the groove. And you can, inserting into one groove, pull out from the larva, scroll into one and the other side, and voila, the hood is unlocked.
Home Consultation with the author. Repair of the castle of the trunk Renault Sandero. How to open a jamble castle. Removal and replacement of spark plugs. Is it possible to remove the protection of the crankcase and the bumper from the bottom to get to the castle? Add Comment Cancel reply. The site works on WordPress.
How to open Ford focus and not getting behind the grille
To the same topic you can attribute a few other questions that I ask: "How to open a hood without a key", "Open the Ford Focus 1" hood, "How to open the hood of Ford Mondeo", "how to open the hood" and so on. I'll show you on the example of your focus 2 ...
On my focus stands the mechanical hood lock. By the way, if you need to remove the castle, then you. The hood opens the ignition key. There is no cable here, and it's not possible to open it from the salon (at least in this configuration). To begin with, we will understand how the Castle of the Ford Focus Castle works, in particular - the Castle of the Ford Focus 1 and the Ford Focus Castle 2.
How to open the hood Ford
As we can see in the photo above, you need to insert the hood ignition key into the lock cell under the Ford branded icon on the radiator grille to rotate up-left. After inserting the key, as indicated on the instructions (in the photo it can be seen), we turn it first counterclockwise (left) to the floor of the turnover, while pulling the hood up, and immediately turn the key to half a turn clockwise (right) - the hood is open.
We look at the photo above. As the radiator grille is far from the hood lock itself, while we are twist the key, we turn this (red arrow) craving, which, in fact, opens the castle. As a rule, the larva of the hood castle breaks. People tend to immediately run with a cry - broke the hood lock, buy the castle of the hood Ford Focus! But, breaking, neither the castle, nor the traction is broken, this thrust (in the photo above) just jumps out of the groove.
But do not worry! The hood can be opened manually by inserting craving into place and tugging this traction from the bottom of the car, prevailing the engine prevailing (see two photos below)
The second generation is popular car Ford. Focus contains a lot of plastic elements, among which - the hood lock. The mechanism of the system is made of metal, but has a plastic drive, which may fail at the most inopportune moment. In such situations, the owner must be able to open the hood without a key.
Features Ford Focus II Lock Design
On the this car The drive of the hood latch is designed in an unconventional manner. Typically, the drive is activated by the cable passing under the hood, and the completed special handle, also this system is duplicated in the terminals of the main lock.
Unlocking the hood is carried out only with the key and from the street, by hanging the nameplate on the grid, insert the key to the locking larch, turn the key to half the turn counterclockwise. Next, it is necessary to raise the hood, turn the key to half the turnover clockwise, and only then you can unscruit the hood completely.
Of course, this system is difficult to call comfortable, but there is no choice with the owners of the second focus. Another feature of this design can be distinguished by the presence of plastic thrust, which are also not very reliable. According to the reviews of the owners, such a traction going to the locking latch quickly fails, ceasing to curb down with the groove. According to the result, the rotation is carried out by the key, but the castle broke, and it will not be able to open it in the traditional way.
What if the hood lock broke?
So, how to open Ford Focus II without a key, if the hood does not unlock through the castle? Often, the design itself does not play any role here, because the metal structure allows the lock almost uninterrupted the castle. The problem becomes plastic elements and thrust from which the larva is made.
At the failure or wear of the traction, you can try to put it in place:
- We dismantle the protection of the motor, after which we have direct access to the castle - it will be noticeable, which happened with the design.
- From under the car, you can set the craving to the place to open the hood or trunk Ford Focus 2, and then implement further diagnostics.
The complexity of the situation is that separately buy traction is unlikely to succeed, as it is sold along with the castle. If you manage to find the structural elements of the lock in parts, it will be luck.
There is a second way suitable for extreme situations when it is very necessary to unlock the hood. You can hack the lock using a long flat screwdriver, also you will need a powerful source of fire (for example, a gas burner) and a flashlight.
The algorithm of action is as follows:
- We translate the lantern through the grille of the radiator, we consider the design of the lock and we are looking for a plastic element where the locking larva is included.
- Heat the screwdriver with a gas burner and smoothly spend it into the hole of the lattice, then a hot stain with a plastic heel of the locking structure, in order to melt the groove. Then we push strongly and try to aim in the middle of the details.
- We delay the sting of the screwdriver in this position for a few seconds, and when the metal cooled, get the tool.
- We wait for the cooling of the screwdriver, again penetrate the groove sting and scrolling the lock as if we make it key. Ford Focus II Lock Opening Scheme is described above.
How can I open without the key remaining Ford Focus II Castles?
Questions about how to open Ford Focus 2 without a key, are found among car data owners quite often. There are situations when the driver forgot the key in the cabin or trunk, got out of the car, and the door slammed. It also happens that the motor has been headed, but it took it from the car, and then the doors were blocked. The key is in the ignition, and the spare is at home. The situation is complicated if such an adventure occurred far from settlements.
Another problem is also possible - Ford Focus 2 does not see the key, due to the locking or scattered castle larvae. The breakdown of the window will be very expensive, so you should look for other options. Fortunately, they exist.
The first way to open a car without a key
Almost every person in the car has a canvas from hacksaw or steel line. These products need to bend a bit, approximately ten centimeters from the beginning. Next, the ruler scrolls down the bend down, is encountered into the hole between the glass and the seal placed in the lower zone of the driver's glass.
You should not fear this action, because the glass will work as a guide. You can penetrate the lines in the cabin, then you should get to the button activating the lowering of the glass. Convenient pressing is performed by the bend of the line, after which you can get into the salon.
Second way
The opening of the Ford Focus II doors according to the second way is to make an element up, replete the door through the loop, dropped the door. For this action, a piece of fishing, flexible wire or rope is required, a length greater than the width of the door 2 times.
To get to the salon, you will need to slightly delay the driver's door and pry it with any subject acting as a lever. The old credit card is well suited, a flat screwdriver wrapped with a knife, but you need to act neatly, in order not to damage the paint layer of the car.
We strust the right upper corner of the driver's door and carefully fasten the fishing line by moving it around the perimeter of the part. We derive the line to the horizon position from the bottom of the door window, and then tie the loop. Initially, this is not done so that it does not happen to tighten the loop during the fishing line in the door design.
Tighten it in the form of a leak so that it is unleashed while tightening. Carefully drag the product from the loop again into the salon, throwing the clips, perform tightening and take up to unlock the door.
Third way
Open the door of the car without a key can be in one way. Ford Focus II machines have one "sore" - the drop in the hood lock thrust, which has already been described above. This element is made of two plastic elements, one of which moves differently. With clusters of oil or dirt, the thrust begins to perform its function badly, and then under pressure drops from the guide. This situation does not allow you to open the hood.
To solve the problem, you need to take a half-meter with a strong wire and bend it with a crochet from the end. We assign a signboard of the car, shone up the lantern and push the hook under the hood. We notice the response element of the key design of the rounded shape, rotating during unlocking the lock along with the mustache.
It is necessary to insert a hook, clinging for the mustache, and turn the lock left-right, imitating the actions performed by the key. The lock will open, then you should find the unfounded lock craving, remove it and move on the sides to remove the contamination and develop the system. After cleansing, you should return the craving in your place by inserting the mustache into the ball, as well as setting the other element to the designated place.
