Comments
Anatoly Posted by (a), 06/12/2014
In the process of driving, side mirrors are injured quite often. And you have to change them. There is nothing difficult here, most importantly smoothly and gently. Although it is not always necessary. If the mirror is on the machine, then unscrew the bolts outside, they are under the plugs that you need to remove, and change the mirror. If the mirror is on the door, then you have to remove the trim, but all unnecessary, there are enough multiple pistons to access the access. And so, in general, with this work any can cope. And if a pair of fasteners, which are attached to the door to the door, breaks, nothing terrible, replace. To unscrew the bolts or self-tapping screws, it was easier, do not forget to process the VD40 mount.
Andrew Posted by (a), 12/15/2014
You will understand in the process of parsing, nothing complicated and requiring some professional knowledge in this repair. In some models, you only need to remove the triangular lid. If there are no wires to the mirror, then just it only, but now it is rare. If with wires, then in some machines, the chip directly under this triangle, and in some under the door wearing, and sometimes still fastening the triangular lid under the skin, then you will still have to remove the door trim, or partially remove it, push and push it to hand Decorate the chip. You may still need special. Tool (asterisks), also take care of this in advance, and if you have a VW, then surely the "sun" keys (this is like asterisks, only more often).
To maximize the situation on the road, any car is equipped with mirrors. There are two side mirrors and salon (rear view). As a result, the driver can overlook the road situation for all 360 degrees.
In the process of operation, auto may occur when the integrity of the mirror is broken. For example, they are deformed as a result of an accident or they can simply steal for subsequent sale. Also, the driver during parking or with any other maneuvers can hurt the mirror so that it is necessary to change the side mirrors on the VAZ-2114. Let's find out how to replace these items that they happen to how to install heated and how to make tuning mirrors - it will be useful for novice car owners.
Right choice
Many domestic cars are constantly wondering how to choose side mirrors on VAZ-2114. The fact is that the various manufacturers offer these products, the mirror element itself may be of various quality. As a result, they have different specifications.
Specifications
Manufacturers are constantly trying to produce a car mirror with modern reflecting elements, equip them with a heating system and electrical drives. All this makes it possible to significantly improve the life of the owner of the Lada car brand. A good mirror increases safety many times.
Modern products can be characterized by an increased level of visibility, the presence of special anti-glare coatings, a clear and high-quality image, a convenient and reliable system of adjustment.
A sufficient visibility for automotive mirrors is achieved using a combination of a form, size, as well as the level of curvature of the optical reflecting element. The position of the mirror is also serifted. From the review, much depends on the higher, the more information about the situation will receive the driver.
Young car enthusiasts like to equip their cars with xenon optics. At night, Xenon is very blinded by other drivers through the side mirrors on the VAZ-2114. To prevent even minimal blinding, a special liquid crystal layer is introduced into it, which, when exposed to bright light, reduces the intensity of the reflected light and allows the driver to protect the driver, thereby helps to avoid accidents.
A clearer picture that is visible to electric mirrors is ensured by a special reflective layer. Previously, it was applied only on the inner surface of the reflecting element - even with a strong contamination, the driver saw a distorted image. Modern manufacturers produce mirrors of the side type of VAZ-2114 with a reflective layer on the outside.
on the VAZ-2114 and their shortcomings
The car is completed with products with durable and fairly reliable fastening, but with all this elements have a whole mass of quite serious flaws. The main minus, which is distinguished by the standard side mirror of the VAZ-2114, is a bad review. Also, the disadvantages include a small amount of adjustment options, and it also trembles when driving.
Especially intense trembling can be observed when driving on bad roads or off-road. And everything would be nothing, but constant vibrations lead to the fact that the plastic pad comes into disrepair. And in view of the fact that the side mirrors of VAZ-2114 have not too successful design, most of the road simply is simply visible. By performing maneuvers, the driver must be distracted to make sure that there is no interference through the windows. Customize the position of the mirror The manufacturer offers using a mechanical lever - this is quite convenient, but this method is primitive and does not allow you to get the desired angle of inclination when all or at least most of them are available.
Also on standard models installed the most simple wedge antambolite system, which is not particularly efficient. In the dark, this primitive protection system from glare does not allow the driver to accurately assess the distance to the nearest vehicle and its overall dimensions.
In addition, in the winter period, the mirror and all its components are covered with ice. And to clean them, you need to make a lot of effort. Replacing the side mirrors VAZ-2114 to more modern will help solve all these problems. The market offers a wide selection of alternative models that are ideal for these cars.
Alternative options
In automotive stores, products are often found with cable adjustments or electric mirrors. They implemented the functions of folding. In addition, side mirrors are offered on WAZ-2114 heated. There are modifications protected from blinding and with rotation repeaters.
The most famous and popular manufacturers are the NPK "Polytech", as well as the company "Ergon". Often there are both high-quality models from Japanese brands. Such a replacement of the side mirrors VAZ-2114 will not be difficult - it can be done without refinement. The product, regardless of the manufacturer, has a massive base in fastening places to the car, which significantly reduces, and even prevents vibration and shaking at all.
Cost and equipment
Approximately the price of one such mirror begins from 700 rubles. Cost can vary significantly depending on the configuration. New left electric mirrors appeared on the market with an aspheric reflective element, while the right - ordinary spherical form.
Electrical mirrors of such a plan are in a special protective cover - it allows you to securely protect the glass of the mirror from any damage. Also, these models have anti-grappling reflectors of various shades. Included there are lining. They are from black plastic, and immediately can be painted in the body color. Sell \u200b\u200boptions specifically for tuning lovers - with rotation signal repeaters. Such details will add attractiveness and uniqueness to the appearance of the machine.
Models with electric drive and heating
These solutions are now very popular. You can manage the position using special joysticks.
The heating function adds comfort and convenience. With the help of it, you can cope with frozen mirrors in a heavy frost and with contamination of reflective elements during the snow or rain.
Dismantling mirrors on VAZ-2114
First of all, you need to disassemble the old mirror. This is not a challenging task, and for its execution only a regular screwdriver will be required. To begin with, you must pry a plug that is on the mirror control knob. It is a screw under the Cross screwdriver.
Next, the plug is cleaned - on the VAZ-2114 it holds on the locks. Minus screwdriver to deduct the locks are very simple. Three screws are under the decorative plug - if you unscrew them, the product can be removed.
This task, how to replace the side mirror on the VAZ-2114, is solved simply and elementary. For this, many people love cars of Russian production - repair can be performed using the minimum number of tools and without much experience. To install a new mirror, you need to do all actions on the contrary. It will not be difficult.
How to disassemble lateral mirrors
Sometimes a complete replacement of the sideways mirror VAZ-2114 is required. It is possible that everything will be installing a separate element on the left or right side.
Let's see how you can disassemble the design as little as possible. At first it is necessary to press from the inside to the plastic case. The holders carefully decline with a flat screwdriver. This method is not too reliable - there is a considerable chance that the mirror element or other details will break.
The second option carries more risks - here you need to quickly hit the glass about the surface (but it is better if it is soft). This is a quick option for dismantling and replacing the element. The blow should be light and fast. To replace the plastic case or main fasteners, get adjusting thrust and pin. The assembly is performed exactly to the opposite.
Installation of heated elements
The installation of side mirrors on the VAZ-2114 heated is carried out differently. The installation kit has a marking template on paper. It should be attached to the door and with the help of sewing transfer the markup to the car door. Then the adjusting mechanism is fixed through the puck. Next, three screws are screwed down, while the upper must go through the hole in the adjustment mechanism. Then the adjusting handle is installed.
Heated mirrors
There are options here - you can purchase a ready-made tuning mirror or separately buy an element for heating and install it yourself. At the cost of such tuning will cost several rubles, and in terms of efficiency the project will pay itself in millions of times.
Heating from incandescent bulbs
So, one light bulb at 21 watts of power can literally for a few minutes to defrost even a very frozen mirror.
If one lamp is not enough, then you can apply two to 10 W or one, but with two contacts. One is intended for defrosting, the second will be used to protect against fogging. This feature will not save you in the rain or snow.
Connecting heating
Often the heating element leaves two wires. You can connect them as you like. Since the heating should be heated with the heating of the rear window, then the cords from the mirrors can be attached directly to this item. If you need to warm the mirrors regardless of the rear window, then you will need a relay and the power button, as well as the fuse at 10 A. If the button is calculated for 10 A, you can do without relays.
The heating system from undergraduate materials is made using a light bulb. This is the most universal solution. It is necessary to finalize the case - there are made from foil. Further, the cartridge is placed with a light bulb and attach it there so that the lamp does not touch the housing or the mirror.
Summary
Thus, it can be replaced or modified at the request of a car mirror. Some acquire solutions with electric drive - it is very convenient. You can equip it with heating and with your own hands. In both cases, there will be no problems in winter.
By the way, an ultrasonic purification of glasses was used on the Toyota Crowon cars of the 90s. Thus, the ice, accumulated on the surface, was filming from it in a matter of seconds. However, most manufacturers preferred to install precisely electrical heating, including AvtoVAZ (of course, as an option). However, you can add this feature using a conventional light bulb.
So, we found out how to change the side mirror on the VAZ-2114 with their own hands without much effort.
Or worse, it was that we return to parking from the store, and the side mirror is no longer. Although I went to the store just 15 minutes.
And if such trouble happened to you, then this is not a reason to peel and look for the nearest car service and its price for the replacement of the side mirror.
The replacement procedure is sufficiently simple and will not take a lot of time.
You only need to buy a side mirror in the spare parts store. ( Average The price of a side mirror for Renault Logan and Renault Sandero from 850 to 1500 rubles)
The mirror is attached to the entire pair of screws, but the problem is to get to them we will need to remove the entire cabin part of the door.
So, from the tools, we will only need a screwdriver Bitholder (Topex, etc.) with a set of bit and patience. 
Step one
We find, unscrew and remove the self-tapping screw that is located at the end of the door.
Step two
Look at the door handle. It has a self-tapping screw, which also needs to be out. 
Step Third
Carefully inspect the armrest, you will see a plastic plug.
Carefully find it with a flat object and under it you will find a self-tapping screw, which also needs to be unscrewed. 
Step fourth
We need to carefully separate the outer part of the handle from the upholstery of the door. Carefully pass flat objects on the groove of the handle with a little effort. After these manipulations, slowly and slowly pull the outer part over. 
Pitch fifth
Unscrew the screws that you will find inside the handle. 
Step Six
Find speakers and remove the protective casing with it better to make it a knife or ruler. Under it, you will find more self-tapping screws, they also need to unscrew. 
Step seventh
When all the screws are unscrewed you can, finally, remove the upholstery of the doors once it does not interfere now. Insert the flat object (a knife, a screwdriver with a straight stall, an iron line) in the gap between the upholstery and the door itself and gently lifting on yourself. You will hear the characteristic clicks. This means that everything goes right and this is disconnected by the upholstery locks from the door itself. 
Step eighth
Remove the door opening craving from the holding mechanism holder. 
Step ninth
The next to our action will be the extraction of wires from the music. Colonges, as well as if you have a windows, do not forget to disable and its button. After that, it is necessary to extract the door opening traction. 
How to change mirror element on the mirror rear view Vaz- 2110
Some sources by car VAZ 2110 This is quite difficult, and there is a possibility of damage when it is replaced. The owner of the tensor can prove the opposite
All this garbage. Everything changes in 3 minutes! I scored an hour when I was in a hurry, I waited until the car was warm up and caught up, the mirror completely shot. At the same time, from the inside the triangle under the mirror,
Photo 1. On the left. Explosive item on the right. New for 35 UAH in the nearest auto shop
Photo 2. From the inside to unscrew the handle of the lever of the mirror regulator.
Photo 3. From the inside we see such a picture.
Replacing the side mirror of the rear view VAZ 2110, 2111 and 2112
Video Replacement Example side Outdoor rearview mirrors on VAZ 2110., 2111 and 2112 do it yourself.
Replacing the side mirrors of the rear view on the VAZ 2110
replacement side Mirror on vAZ 2110. , 2111,2112 and so on.
Photo 4. The factory even took care. clung to a piece of noise!
Photo 5. Well, this is the procedure.
Photo 6. This white regulator plate.
Photo 2. (One bolt under the fork), then remove the plastic case (theoretically, it is attached to three "pistons", but after I took off the lever, immediately retired!) And unscrew the three bolts of direct mirror mounting.
Photo 3. glue-noise, pour under the seal of the side window (the holes can be pierced with a screwdriver, "noise does not interfere with the installation")
Photo 5. Scare from the complexity, but everything is simple for pain: We push the finger until you stop the point to the point "1", and then omit the finger at the point "3", pulling slightly, mirror element Easy is removed. Do not pull out mirror. And that's it. Everything is shot without prejudice and chop.
Photo 6. Remove mirror element In the middle of the middle slightly press it with a fist (or something else on the area more than 5x5 cm) until it clicks.
Everything else is collected and screwed up in reverse order. And if you do not reach him, itself mirror It should be very tightened, it will vibrate on blows and will not be able to resist even with the weakest attack of Vandala!
And for quality do not scold. I do not wear my digital with me always.)))
Good luck and even roads!
Read
We change the timing belt on the Chevrolet Cruise on its own power distribution mechanism of the vehicle is a fundamental node in the works of the car. If the passage of the vehicle breakdowns the machine will be impracticable. You should attempt to pay attention to the performance of the mechanism. Such a material will help figure out how the process of changing the timing strap timber ...
»How to replace the side glass in the car do it yourself
Replace the side glass requires not as often as the windshield.
But sometimes there are unpleasant situations, after which it is necessary to change it. The glass may suffer, for example, because of the attackers, put an eye on something in the car, and the owner himself can break it, for example, when it turns out to be in a hopeless situation, having shuting randomly keys in the cabin.
As a result, the choice will be small: go to a service station and lay out a decent amount for an hopeless work in general or replace the glass yourself. This repair does not require special skills and a long time for execution and will save the budget from unnecessary spending. So how to replace the side glass on the passenger car?
Preparatory work on the replacement of lateral glass
Because it will have to deal with fragments, you need to get elementary tools for protection. The rubberized gloves on a textile basis are suitable. The main thing is that they be dense enough and could protect your fingers from the cuts.
After large glass fragments are collected, the car's salon is worth spending to remove all the fine battle and glass dust, which can also deliver trouble in the process.
Tools and materials for replacement
For such a repair, you do not need to have complex equipment. Most likely, everything is found in the house or garage. For work you will need:
- - a set of wrench keys (it is desirable that the objects are also included, and the cape keys, if there is a ratchet with a set of shift heads, then it will also come in handy);
- - a set of crusades and conventional screwdrivers;
- - scissors or knife;
- - Brush to remove dirt.
In addition, additional materials will be required, which will be useful when replacing the old glass to the new:
- - a piece of raw rubber size of approximately 30x10 cm;
- - sealant;
- - Plastic locks in the amount of 10 pcs.
Dismantling Side Door
To get to the fastening of the glass and the mechanism of the windows, you need to remove the trim from the car door. To do this, first remove the handle and the door armrest. A screwdriver carefully not to leave damage, and decorative plugs hiding the fastening bolts are commemorated. Bolts are unscrewed using a crosst screwdriver, after which the door handle is easily removed.
Then the door of unlocking the door is removed and removed, the handle of the window is removed and the staggels of the lock lock are removed.
After that, the bolts holding the cover panel are unscrewed. As a rule, it is additionally held by plastic locks. To remove it from the frame of the door, the trim will have to pry in the corner of a flat screwdriver and pull on yourself with a little effort, at the same time pressing the beaches of plastic locks. So they make it easier to come out of the grooves. Once the panel is removed, access to the lock and windows mechanism will open, as well as to the fastening of the glass. Most likely, at this stage, it will be possible to use a brush and vacuum cleaner again to remove fragments from the door. After that, you can proceed to the replacement of the glass itself.
To replace, disassemble the entire mechanism of the windows do not have to. It will be enough to get a metal bracket holding the glass. To do this, the windows handle is installed again in place, and with its help the fastening mechanism is lowered to the lower position. This is done in order to gain access to fastening bolts. Using wrench keys, the bolts are twisted, and the bracket is easily removed.
If the replaceable side glass has already been purchased with fastening installed on it, it is installed in such a set to the place of the old and further assembly is carried out in the reverse order. But if there is no such bracket on it, you can use removed. For this, its size is cut off the raw rubber strip, which will serve as a seal. Inside the bracket poured a small amount of sealant. To the bottom of the glass in the place where the mount will be, the carved rubber strip is glued. At this stage, it is necessary to pay attention to one detail. On the adhesive side of the rubber there is a protective film that the adhesive will need to be removed.
Then the glass is installed in the bracket with the bottom side with the seal. In this process, it is important not to confuse the front and inner side, as well as correctly calculate the place where the bracket will be on the glass, as otherwise it will not work out on the windows. All excess sealants, extruded, need to be removed.
After the new glass in the assembly with the mount is installed in place and fixed on the mechanism of the window switching. Before tightening the bolts tighten, you should check, exactly all the elements were installed. For this, the mechanism rises to the upper position. If there is a skew when landing parts, it must be eliminated. After that, the window lifter is lowered to the lower position, the fastening bolts are tightened. Before installing the upholstery back on the door, the handle of the window can be removed.
Then all broken plastic locks are changing on the panel, the upholstery snaps into the grooves and is fixed with bolts. All removed plugs, handles and spiing plans are installed in place. Glass returns to the upper position. In this position it should be until the sealant is free.
If the glasses are sweat in the car - what to do and what are the causes. Replacement, repair windshield do it yourself Watering windshield do it yourself - video 
Watering the headlights with your own hands - training and recommendations Peugeot door - Removal, Installing What is a liquid glass for cars - the use and polishing of the body
