Home Locks If I clogged on Opel Astra J Salon Filter: Replacing the Cleaning Element of Astra Jzhi per service station. If I clogged on Opel Astra J Salon Filter: Replacing the Cleaning Element of Astra Jzhi on a hundred How to replace the cabin filter Opel Astra J

If I clogged on Opel Astra J Salon Filter: Replacing the Cleaning Element of Astra Jzhi per service station. If I clogged on Opel Astra J Salon Filter: Replacing the Cleaning Element of Astra Jzhi on a hundred How to replace the cabin filter Opel Astra J

It should not be fruitless, refers to the replacement of a car salon filter, this is an extremely important and common procedure. The fear of the Filter of the Opel Astra J, it must be made every 15-20 thousand km, and if high humidity prevails in the car, then the filter is prevailing.

Required filter replacement tool:

  • Passatia;
  • Key to 7;
  • Screwdriver;
  • New original filter with number 13271191.

The process of replacing the cabin filter on Opel Astra J

Since the Salon Filter is located behind a clothing glove, the glove box must be completely dismantled from the cabin.

First of all, for the convenience of work, you must remove the globe cover. For this you need with the key on 7 , unscrew one TORX screw, and remove the cover from two latches. At the same time, it must be remembered that the lower candy cover must be dragged to himself, and not from herself, the latch is located closer to the passenger seat.

After removing the lid, it is necessary to dismantle the sidewall, which is located in the gap of the door and the glove box. For what needs to be left toward the door seal, and then then move the side panel to the right. The panel is fastened with a hooking and three latches that the main thing is not to break, otherwise the panel will ring when driving.

Now it's time to remove the glove box. It is attached to four TORX type screws, turnkey on 7 mm. When removing the glove box from the niche, you need to be very careful not to break the wires of the backlight. For this reason, it is necessary to extract the glove box until the illumination wire appears, after which it must be turned off, and continue to extract the glove box.

01 02 03

In the bastard cavity, there is a whole salon ventilation system, among all the elements, it is necessary to find a square box, which is a compartment for the cabin filter. In order to remove the box cover and get to the filter element, you need to disconnect the clamps on each side.

To remove the filter itself from the body itself, the filter is necessary to drag on itself. Since the filter does not have any projections, it is necessary to use a screwdriver to extract it, which is a cleaning element between the housing and the filter.

Next, a new one is installed on the place of the old filter, the main thing is installed correctly position the filter in the housing. The correct location is considered when the arrow on the filter indicates the direction of the air flow, is directed down. After that, the case of the housing is closed, when closing it is necessary to pay attention to that it is tightness and there was no gap.

Video to replace the salon filter Opel Astra J

The previously extracted glove box is installed in place, and the backlight is connected, after which the replacement of the Opel Astra J filter is considered to be completed.

In living conditions with an increased dust ratio, the presence of cleaning elements is extremely necessary. The more carefully the air will be cleaned, the easier for the body as a whole. In the apartment, stationary filters are performed, in the car - pre-installed cabin filters. Absolutely all the devices are equipped with such means by default.

The principle of operation of the salon cleaner lies in filtering the incoming air flow from the outside of all sorts of harmful impurities, dirt, dust, excess moisture. Systematic waste accumulation leads to clogging of filter channels, the element needs cleaning or replacing the new one. The decision takes the wizard of the service center in which the owner serves its car. You can make a replacement yourself, the manufacturer allows such, however, the presence of experience and skills in the car maintenance. In the absence of the latter, trust the case to real masters.

Our repair services

The service center offers a wide range of car repair services for various brands and modifications, including Opel Astra J. among demanded services - maintenance of the air flow circulation system, and:

  • prevention of air circulation system, replacement of air and cabin filters;
  • diagnostics of air conditioning systems;
  • check the purity and integrity of air circulation channels on pipes. In the presence of damage - replacement or restoration of integrity.

We also carry out:

  • engine maintenance, transmission, regardless of modification, chassis, front and rear suspension;
  • preparatory work on the painting of the body, the removal of rust, areas of corrosion, primer, putty, applying a layer of varnish to the surface;
  • work as part of an individual order for installing freelance equipment for the car;
  • checking the integrity of the electrical component, wiring, replacement of damaged sites;
  • diagnostics of the brake system, checking the thickness of friction linings.

The masters of our hundred quickly and in a short time performs the tasks due to:

  • availability of qualified personnel with extensive experience in the profile;
  • modern digital equipment, equipment for full-fledged diagnostic work;
  • professional approach in solving tasks;
  • systematic training of service workers;
  • flexible pricing policy;
  • an individual approach to each client.

In which cases it is necessary to change to Opel Astra j, the cabin filter: replacement and reasons to make it a hundred

Characteristic features of a malfunction:


The above features are manifested as a single, and in aggregate.

Causes of filter damage:

  • natural factor - long-term operation without intermediate replacement;
  • moisture getting inside the cleaning element;
  • mechanical damage as a consequence of the accident, accident, collision;
  • marriage factor in manufacturing, non-compliance with established production standards.

Driver to a note! When identifying one or more factors, it is recommended to contact the service center for diagnostic work. Do not attempt to independently replace the Opel Astra J (Opel Astra J), as you need experience in handling the passenger compartment airbag. With incorrect installation, the likelihood of a false response of security systems or a refusal of work as such is high.

Diagnostics with subsequent replacement of the Opel Astra J Single Filter

The primary inspection is carried out from the cabin, since the main element is located there. However, the cleaner is neatly hidden behind the glove compartment. To ensure access, you need to pre-remove the discharge box that is attached on four bolts, remove it, only after that you can proceed to the diagnosis.

The filter is located in a special plastic case, which is tightly closed with a lid. On the sides are clips, they serve as locks. Shifting them, dismantle the lid.

White filter color indicates its purity, all other - to pollution. In parallel, the master inspects the plastic housing, air supply nozzles, other adjacent elements for the integrity, lack of defects. Based on the data obtained after the prevention, the wizard decides whether to replace the Astra J salon filter to a new one or can be limited to the cleaning of the old one.

Replacing the salon filter Astra J

If the master is decided to install on Opel Astra j, the cabin filter, the replacement of the old on a new cleansing element is carried out quickly for ten minutes. After dismantling the salon glove, his withdrawal from the landing place, the master unscrews plastic protection in the side of the torpedo. To do this, you will need a screwdriver to "7" and a special key for temporary de-activating airbag. Only after this step is allowed to dismantle the protective plate. Under protection there is a fourth bolt to unscrew. The cabin filter is extracted, a new one is installed in its place. The glove box is installed in place, replacing the Astra J salon filter is over.

Attention! Search index according to the catalog of the salon filter Alco MS-6398 C. The firm-producer does not have. The main thing is that on the back of the packaging, the admission for cars of the Opel Astra J series is indicated. Otherwise, it is better to abandon a dubious purchase.

Fair pricing and quality guarantee for our work

Availability is the main criterion that we are guided by calculations for the services rendered. It is important for us that the cost of repairing is ran away to each client. We provide the opportunity to partially reduce the cost of repair work at the expense of the acquisition of consumables in our service followed by the installation.

The parts implemented and installed by us are fully certified and allowed on sale by the manufacturer. Deliveries are carried out directly. The probability of poor quality goods or non-compliance with standards is reduced to zero. If the owner provides consumables, identify compliance and the quality of which is not possible, we stipulate the warranty period in advance.

Good day to all! If you are looking for information on how the Opel Astra J salon filter is replaced, then you got exactly at the address. In the article you will find the full instruction that will help to cope with the work. A separate photo with a comment will be added to each stage of the procedure, and at the end of the article video will be added, in which everything is described in detail and shown. So, let's go.

Why and when to change the cabin filter on Opel Astra J?

The cabin filter is designed to filter air entering into the inner space of the car. In the old machines such an option was not and the air came to the interior of the car along with dust, mud, foliage and insects. Now the cars have become more technological and almost every model provides in the design of the cabin filter.

It should be understood that during the operation, the cabin filter, like any other filtering element, comes in disrepair. Determine the scored filter will not work if it is easy to extract and evaluate the external state. On most cars, this is done literally in a couple of minutes and without any tools. The filter removed can be wrapped or producing a compressor that he will extend his life slightly. However, in some cars to get to the salon filter, you need to do more effort. In this case, not to do this work several times, it is more correct to replace the cabin filter to a new one. And to determine whether indirect signs will help the cabin filter.

Firstly, if the windows in the car have become very foggy in the wet weather, then the first thing you need to replace the salon filter Opel Astra J.

Secondly, if in the winter time of the year the stove in the car began to blow worse, then the cause of the malfunction can be hidden in the cabin filter.

Thirdly, if, when you turn on the heater or air conditioner, you began to notice the unpleasant smell of the air ducts, then the salon filter must be replaced faster. The filter was hammered, and due to the accumulation of condensate, bacteria began to multiply.

These three signs will be enough to understand whether the salon is required by car or not. And if you own a long time, you should know that the Opel Astra Filter J is changing once in 30,000 km of run. If the machine is used in dusty conditions, the interval of the replacement is better to reduce to 15,000 km of run.

Instructions for replacing the salon filter Opel Astra J do it yourself in 5 steps

Step 1. Move the door sealing gum from the front passenger and disconnect the decorative plastic lining. The pad is fastened with the help of latches, so nothing to be cleaned. Just pull the lining to the side. This is required in order to get to the screws of the glove box fastening.

Step 2. Open the glove box and turn the head on the 7 "four fastening screws, as shown in the photo below:

Bardaque pull on yourself and put on the floor. Plafth wire can not be disconnected to save time. Its lengths are enough.

Step 3. Click your fingers two latches across the edges of the cabin filter plug and remove it aside.

Step 4. Pull out the old cabin filter and install a new one in its place. Observe the correct location of the filter element. If AIR FLOW is written, the arrow on the filter should specify down.

Step 5. Perform everything in the reverse order, i.e. We put the plug, glider, decorative lining and door seal. Old filter We utilize in the trash.

That's all right. The procedure for replacing the salon filter Opel Astra J is over. In time, everything took about 15 minutes. Savings from the work done is approximately 200-300 rubles.

Video replacement salon filter Opel Astra J do it yourself

Replacing the cabin filter is a fairly common procedure that should not be neglected. In my astre, I am a replacement every 15-20 thousand km, however, if there is an increased humidity in the cabin (which I do not have glory), it is recommended to change it more often. To replace the Opel Astra J 1.7CDTI, I used a carbon filter with a number 13271191 worth 2,000 rubles.

To replace the cabin filter, you will need to completely remove the glove box, because it is located behind it. And so, we jeep!

We remove the bottom cover of the glove box. To do this, we unscrew one 7 mm TORX screw and remove the lid that rests on 2 latches. There is a small subtlety here, you need to pull the bottom cover towards yourself, instead of pressing it from yourself, since the moving part of the latch is closer to the passenger seat (see photo).

Fig. one

Now it is necessary to remove the sidebar located between the glove compartment and the door. To do this, take the door sealant, and then assign the sidebar to the right. The panel is held with the help of three latches and a hook, which is important not to break, otherwise it will be reconciled when driving.

Fig. 2.

Fig. 3.

Now you can extract the glove box. It holds on four 7mm Torx screws. When removing the glove, you need to be extremely careful not to damage the wires of the backlight. Therefore, we remove the glove box and as soon as the backlight wire becomes visible, turn it off, after which you can completely remove the glove box.

The glove compartment is located the main elements of the ventilation system. We find a black square "box", which is a compartment with a cabin filter. In order to drop the lid, you must disconnect the clip on each side (shown by arrows in the photo below).

Fig. four

To remove the cabin filter, it is necessary to pull it on yourself, I have some difficulties with this, since no protruding elements for which could be seized on the salon filter did not find it. In general, I used a screwdriver with a flat sting, insert it with a hull and a filter so as to pick up and "way out" it from the compartment.

Next, we set a new filter instead of the old one, while you need to make sure that the direction of the air flow direction arrow drawn on the filter is directed down. Next, we close the lid, make sure that it closed without cracks.

Install the previously extracted glove box in place ( the main thing is for forget to connect the power of the backlight!), In principle, everything, the work is completed, everything required about 15 minutes.

Finally, a pair of photographs of old and new filters, as they say, for comparison.

Fig. five

Fig. 6.

Good luck on the roads!

Toyota Land Cruiser 200 is manufactured since 2007. This is a real older market. And the point here is not that it is already 12 years old on the conveyor, but that he is at the same time the segment leader, because sales are only growing every year.

And all this thanks to the fact that the brutal Japanese SUV is constantly improving and upgraded, and also updated with new versions. And one of the latest Land Cruiser 200 TRD. What is interesting to this car? Maybe this is a new competitor GLS 63 AMG or X7M?

What is TRD? TRD is decrypted as Toyota Racing Development. This is a special division of the brand, which is engaged in closing cars. This is like AMG or M Perfomance. But there are some differences.

Design primarily. Which wards were not installed on Land Cruiser 200. At first, these were projects from famous tuning ateliers, but now in Toyota periodically release new versions on their own. And the latest version is Land Cruiser 200 TRD.

First of all, the car differs from the civil version of sports kit. Here and on the front, the bumper is very massive, and in the back of the scenes are large. All this worsens the permeability. All other body details are exactly the same as in civil versions. The style of the kit reminds the version of Executive Lounge, but has more sharp faces and TRD nameplates. On the fifth door and grille lattice there is a logo TRD.

Interior. In the cabin, only the engine start button has changed, there is nothing more new here. The only thing that has become slightly more elements made of genuine leather. And otherwise all is identical to standard versions. Inside the Japanese frame SUV traditionally spacious, comfortable and cozy. Ergonomics at the highest level. Is that the level of multimedia upsets. For such money it was possible to make it better. But here there are circular review cameras, so the visibility is perfect here. And landing behind the wheel of high due to the presence of the frame.

Engine and driving quality. In special operations change nothing. The car is equipped with the same motors: 4.5 liters diesel, 249 hp, 4.6 liters of gasoline, with a capacity of 309 hp And I must say that the car goes very cheerfully.

Compare this SUV with a frame and a rear-continued bridge with Mercedes-Benz or BMW is simply meaningless. But there is one but. For the TRD version, the default car is equipped with an adaptive suspension. You can also set the magnitude of the road lumen. It is very convenient. It is worth noting only one minus of all Land Cruiser 200 motors. They are very voracious. If you ride a car with a diesel engine, you can easily reach the fuel consumption of 17-19 liters of a diesel engine at 100 kilometers.

Riding off-road. Here, the SUV manifests itself in all its glory. There is a hydropneumatic suspension, and the KDSS system, and Crawl Control. You can still block the rear axle. Especially on the off-road help the chambers of a circular review. And for more security, you can turn off airbags. On off-road it is necessary. In this among Land Cruiser 200 the best. And everyone knows.

Outcome. The new version of Toyota Land Cruiser 200 TRD is an excellent addition for those who love a dynamic ride and a beautiful appearance. The car in this performance costs about 6.5 million rubles. And this is an acceptable price for such a reliable, frame and spacious car.

New on the site

>

Most popular