Today, it is often possible to meet electric vehicles on local roads. At the same time, it is not about the machines that can be attributed, for example, Tesla or other similar models, but exclusively about full-fledged modern two or three-wheeled vehiclescapable of providing substantial assistance in the field of movement through the city streets and off-road in particular.
The most popular view of the transport is today an electroscuter.
Homemade electroscuter
Speaking about how to make an electroscuter with your own hands, this procedure initially implies the presence of a minimum base kit that needs to be upgraded.
It is for this reason that the process of manufacturing an electrical cucumber with their own hands entails the need to first choose the optimal model of technology requiring processing.
The electroscuter scheme is as follows:
- Initially, it is necessary to determine which electric motor is perfect for personal needs, and which controller is used. It is from these parameters that will need to be repelled.
- On the next Stage For the manufacture of homemade electrical cchetus from the starter, it is necessary to fix components on the frame and the suspension (motor, battery, etc.), after which it is necessary to connect everything together.
- At the final stage, you need to charge the battery from the 220V network and check the quality of all connections.
IMPORTANT: Just make sure that the assembly passed without flaws, you can proceed to testing.
Choosing an electric motor
Collecting electromopy with her own hands, it is worth paying special attention selection of the engine with the battery, since it is from this that the final result depends, in particular maximum speed and mileage.
Choosing an electric motor
In the process of selecting his rechargeable battery It is necessary to repel from the following features:
- the most expensive model is considered to be a phosphate lithium, the advantage of which is a small weight. For myself it will become an excellent option;
- the optimal place to install on its device is considered under the frame where the controller and alarm will also be placed (it is installed on its technique as desired).
Halfing its electroscuter, many begin with familiarization with numerous pictures and images. However, the specialists do not recommend this, as a person should keep a unique idea in his head, otherwise there is a high probability to miss anything.
Working out your scooter, it is worth remembering the need for welding. As a rule, this also plays an important role when choosing a battery.
If your development plan does not imply independent workInitially, you need to consult with a specialist.
Despite the substantial expenditure on welding, its scooter will quickly pay off.
Choosing a battery
Scooter assembly and welding
To assemble your electric scooter, it is impossible to do without welding work.
Among the features are distinguished:
- the profile tube with dimensions of 20x20x2 mm is often taken to their scooter as a frame as a frame;
- mounting for the engine - mandatory to develop on its scooter;
- in order to install the management system, IRF3205 transistors are applied;
- if necessary, conducting turning works.
Important: no need to forget to install a chain tensioner on your electroscuter, without which it is impossible to touch.
Safety of homemade electroscuter
Making your electric scooter needs to be remembered by several things:
- risk to life is missing - high-level safety;
- costs are essential. There is a need to pay not only for the engine, but also for the expensive controller.
The only negative point is considered to be the likelihood of not touching if its electroscout was wrong. That is why it is necessary to treat it with full responsibility.
Scooter on the electric shirt. As an engine generator from Ford. DIY ELECTRIC SCOOTER TEST DRIVE, CREATIVE CREATING VITALY BOCHEV. Interesting of this craft is that a person went through the factory gasoline scooter and made the electronic means of electro. Of course, everyone has the opportunity to use the machine, especially with CNC. But as an experience as a visual application, the homemade assembly of Vitaly Bogacheva for someone can be useful.
In addition to the fact that the electric motor is converted from the generator, its fasteners and suspension rear wheel Also subjected to refinement, namely welding of krantsteins under the wheel. So, also a welder is needed for such a construction.
At first, I also thought about the ones to translate, the benzo scooter into electric but after I realized that without the grinder of the welder and good metal could not do, immediately threw this idea. The fact that such equipment is not cheap and you need to be able to be able to be able to find a used electric carpet and much cheaper.
But how many people have so many opinions, maybe someone has similar equipment, then why not. And the experience is always valuable.
Well, a couple of rollers on this topic:
I want to tell how I made an electroscuter with a friend. Patient: Honda Dio 34 with DVS Motor Driving Thanks to Matam and Whose Mother. A small retreat - a scooter did for the grandfather who lives in the village, the thought of removing the latter long ago, TK gasoline and spare parts for a scooter to get very difficult. All parts were bought on Alik, with the exception of the motor, it turned out to be cheaper in Ukraine than narrow-eyed friends.
Patient before alteration
Motor QS Motor 48V 2000w
Started from the manufacture of a pendulum, for this took the usual profile pipe 40x20, two lards and the pipe of the appropriate diameter, everything was cut with a hacksaw (the grinder is naturally not) did without drawings, all at the place
The shock absorber was missing 3 times, at first Low Rider came out, for the second time the clearance like Renzh Rover, and for the third time on the leg barely worth it, but okay: D
Next, when the motor is on the spot, the case is behind the electronics and the battery - here in more detail, in this Honda tank is located in the floor, it means that the battery is shoved there, the assembly from Chinese cans 3300 (real 3100) 13S 11P
Yes yes, you can not solder
First fitting
since the battery is in the floor and all shit will fly with front wheelthen he needs a hull, from which it is to do in the village, right, from a tree 😅 or rather from plywood from the TV
The bus is also made of battery shelf
The dashboard I wanted to save it in an original form and did not cut the voltmeters and the like .. On this, the fuel level indicator was decided to remake the charge level indicator, for this was used Arduux, microserous, voltage divider and not cunning code
Oh yes, onboard network, for on-board network A converter from the same site was used, which I safely burned by popping the entrance with the exit, and fry in a frying pan in order to dig a compound and repair (successfully) :)
Another half day in the wiring and throwing out unnecessary modules and here it is ready
Charging port in the hatch where there was a benzobak, charging 5 ampere, according to the characteristics, the reserve of the course of about 70km Mountain, pulls sooo cheerful, maximum speed 70km / hour, from the spot, grandfather satisfied))
