This is a truly spectacular sport, rollers with drift are gaining hundreds of thousands views on Yu-Tube.

As a rule, the drift on the bike is made during rolling rolling, the car is most often used for lifting back. This bike resembles a children's tricycle, but its main difference in the lowered seat. The following signs are allocated:

• A small front wheel and 6 times less than its rear;
• On the rear wheels there are no rubber tires;
• It happens drift-trich with the engine.

The pedals of such a bicycle are practically not allowed to move, since with their help you turn up a maximum of up to 25 km / h, and for the execution of the tricks you need to go at least 60 km / h. Turn and pass back you need no need.

Drift Tryk with a motor - expensive pleasure, its price comes to 2 thousand dollars. In this case, the engine, as a rule, has a power of 6.5 hp. It will not be possible to save, this will affect the quality of the model. The only way out is to assemble the bike itself.

At the same time register Trike, as a vehicle, the legislation does not require, because it is still a bike.

In order to collect Drift Tryk with your own hands, you will need an old tricycle that will not mind to disassemble. The first thing to do is prepare drawings. Be careful, it depends on them how safe will the drift on the bike.

Blueprints

In the drawings, you need to read all the details and calculate their exact size. You can do it yourself or find the ready scheme on the Internet. Do not avoid viewing several dozen drawings. Focus on those spare parts that have.

After you have made a drawing, you can start collecting Tyk with your own hands.

Take the old bike. Get rid of the pipe under the seat and the upper wings over the rear wheels. Be careful: do wrong - you have to look for a new material for your vehicle. At the bottom wings, attach a sufficiently dense board. For the frame, pick a strong pipe with a diameter of centimeter in 3. Bend them in the form of arcs and secure them with each other. To build the frame, you will need special tools, in particular pipe bender and welding.

Rear wheels Make out of wood or remove them from some trolley.

The seat can be made of a tire or part of a plastic garden chair. The main thing is that you feel comfortable.

You can collect the trap yourself and the motor, to do this, use the MAP motor.

Buy new spare parts for nothing, use the used software, it will practically not affect it, but it will help reduce costs.

And remember, riding in crowded places and on the roadway, you are at risk not only yourself, but also around. Come to the choice of places for drift with extreme caution.

Drift Trakhk Kseto is adrenaline!
Kseto Drift Trike - for all drift lovers!

Kseto Drift TRIKE 500W - 40 000 rubles +7 922 202-12-51 Business ideaWe are 9 years old Free shipping to any city:

Briefly about Electric Drift Track Kseto:

The new product from the company MK Prokat under our Kseto brand is the electric drift trail. First of all, we do not leave the concept of our business and customers offer exclusively electrical products, as this is not the fact that this is the present. And the use of electric trach is much more convenient than gasoline. The model we offer is, first of all, the quality of components and an excellent appearance. The powerful motor and capacitive battery will allow you to have a long time to enjoy drift. We offer 3-version drift trades Kseto with different power of the motor. Motor power 500 watts, 1000 watts and 1500 watts.

Who is interested in the electric drift traction Kseto:

All fans of speed and adrenaline. Drift Trike can be used to create a business for renting and renting an electroscuter for drift, both in a stationary platform and on exit events. Karting centers can expand the range of their services by providing clients with this novelty. All others can be perfectly used Drift Trike for emissions of their adrenaline and getting strong emotions.

Drift Trike Kseto. Steel housing and fork of aluminum alloy

Drift Trike Kseto. Powerful and reliable lithium ion battery with controller

Drift Trike Kseto. Battery easily removable

Drift Trike Kseto. Convenient seat

Drift Trike Kseto. Screen with battery voltage (battery charge)

Drift Trike Kseto. Wheels shoes in PVC overlays 10 mm

Technical characteristics of the electricCCer Drift Trike Kseto:

• Frame - Steel
• Front fork - Aluminum alloy
• Brakes - disk 160-200 mm
• Mileage on one charging - 40-50 km
• Speed \u200b\u200b- 35-40 km / h
• Front wheel - 20 "* 2.125 kenda; rear wheel of aluminum alloy - 10"
• Front Width Hub - 100 mmm
• Rear wheels in hard PVC drives per 100 mm
• Motor - 48V, 500-1500 watts
• Rechargeable battery - 10-20 amps / h, removable
• Charger - 2 amps / hour
• Convenient seat - Skin. High Quality Replacement
• Weight - 40 kg
• Design - consists of two parts

Buy Drift Track Electric Kseto.drift trike With a guarantee in the offices of Yekaterinburg and Moscow or free shipping to any city of Russia, Kazakhstan, Belarus and Armenia.

Telegram Phone, WhatsApp, Viber, Telegram: +7 922 202 12 51

• Design features
• Pedals are not necessary
• Drift Machines with Engine
• The attitude of the law for the fad
• Homemade drift traction
• Drift Trike - Drawings
• service and repair
• Overview of the best models

Drift Trike is an extreme sport on a three-wheeled bike. This is more passion than the direction. But drifting is very terrible, and it is not always possible to find a three-wheeled bike for him.

And high-quality and branded models are much worth.

But not everything is not good, this means can be made independently. Before you begin, you need to get acquainted in detail with all the raisins of the bike for drifting.

Bicycles for their differences and drift

The design of bicycles for drifting is folded from three wheels and from low seats. Although it looks like a bicycle design that everyone is familiar from the distant childhood, but riding such a bike is very terrible and requires widespread experience.

It is possible to allocate the main differences between these bicycles:

• Extraordinary design;
• The presence of three wheels;
• Low landing of seats;
• Application only for drift - controlled drift.

Design features

The main highlight of this vehicle is contained in its uniqueness. It is often invented and the lovers themselves are made.

Features of bicycles for drifting:

1. The front wheel has small sizes. Unlike ordinary bicycles, the front wheel of this means is average. Its diameter makes approximately 20 inches. It is the same as on BMX models for the trial;
2. Rear wheels are six times less than the front. The size of their width may be larger than the diameter of the maximum twice. It is fundamentally important that they are made of hard and even material. It is worth considering that rubber tires do not dress on the rear rollers;
3. Low seat. These bicycles have a very lowered seating. The racer can regulate and install the right position of the landing site. In a homemade bike as a seat it is possible to apply a simple car tire;
4. As a feet support, it is possible to apply a special support that is installed on the front fork near the front wheel axis. This support is possible to apply in addition to control the bike on the go.

Pedals are not necessary

Few people saw a three-wheeled bike on the road, based on this, many people do not have, as he looks and, especially as he moves. It is worth noting that the pedals on this vehicle are not fully needed and are an excess element of the design. Any sense of drifting is contained in slopes from the slide.

And to lift optimalize the car help. For this it is necessary to bike through the cable behind the car. If you turn the pedals on the drift trail, it is possible to accelerate the maximum up to 25 km / h.

This is very small speed.

To perform exciting tricks on a three-wheeled traction, you must accelerate up to 60 km / h. Many cyclists on a special motorway for drift on this bike do unusual movements in the form of snakes, or fall on the side. This goes scary, but it is worth it.
Drift Machines with Engine

It goes without saying bicycles for drifting expensive, and not everyone can afford them. Based on this, there are few them because they are trying to make themselves.

The car for drift called Big Wheel Drift TRIKE manufactures the American company called SFD Industries. This company for the most part specializes in the production of bicycle spare parts.

Constructive raisins Drift cars:

• Engine. Compact gasoline motor. Its power forms 6.5 hp;
• Front wheel. The size of the front wheel forms 26 dums;
• Rear wheels. They are very small. The size of the diameter of each wheel forms 3.5 inches. In addition, they are dressed in special replaceable plastic tubes. It is necessary that the rollers do not erase when sliding.

In addition, it is worth noting that the price is quite high. The average specific cost of the trades together with the engine can be about up to $ 2,000. If you charge another 200 US dollars, it is possible to buy a bikerike with a more wonderful engine.

And when you pay another 200 american dollars, then it will change in it all the whole throttle aggregate.

The attitude of the law for the fad

Trica for drifting in Russia's legislation refers to simple bikes. The rules of road displacement do not establish differences between the three-wheeled and two-wheeled bikes. Based on this, this vehicle is not required to register.

As for the rights to driving, they are also not necessary.

But this is a very terrible occupation and usually it can lead to significant problems. Many Extreme Lovers, chasing on these bikes, often leave for the roadway, thereby creating trouble to move transport. From time to time these races will be able to lead to important traffic accidents.

Whereas experienced athletes, for drifting on these bikes, choose closed asphalt motorways.

Homemade drift traction

it is optimal about manufacturing a three-wheeled bike yourself. It goes without saying that this will take time and not enormous costs, but it costs it. The most basic one bike will be durable and durable.

Homemade Trike can be made of a bike, which is not sorry to let under the saw.

For the most part, simple children's three-wheeled bikes or BMX - bikes for cross are used. Before starting making, it is directed to create the drawings of the future model.

Drift Trike - Drawings

To be sure and completely correct to collect all the designs need to make a drawing. In the drawing, it is necessary to completely correctly spread the entire design of the bike and specify the sizes. At the bottom of the pictures demonstrated samples of drawings.

It goes without saying, it is possible to make it yourself and specify its own dimensions.

How to make a bike for drifting - detailed instructions

At the end of the manufacture of drawings, it is possible to start making a bike for drifting.

Step-by-step manography instructions:

1. First you need to prepare the database of the entire design. For it, any dilated tricycle or broken BMX with 20 inch wheels will be perfectly suitable for it. Only the front part along with the wheel, fork, piece and wheel of the frame with the bottom pipe of the front triangle are useful. The seatper and the upper rear feathers must be sprinkled under the base. But the lower feathers must necessarily leave in its place;
2. On the bottom feathers board or simple plywood is installed. It is more optimal about the material to be stronger, so that it was able to withstand huge loads;
3. Making frame. For this, durable pipes with a diameter of 16 and 30 mm are suitable;
4. At the end of how the frame is preparing, it is directed to make the rear wheels. As these elements, it is possible to apply ready-made fine wheels from carts, or make yourself, for example, cut out of wood. Rear wheels should have the following parameters - the size of the width and diameter is obliged to be 2.5 inches. It is necessary to handle the cut pipe from PVC on the rear wheels. Through this material, the rollers will better slide, and their movements will be smooth and rapid;
5. To stop for the legs it is possible to weld two pieces of pipes to the feathers forks;
6. In the end, it is necessary to carry out an ergonomic landing place. It is possible to apply a plastic chair or a tire from the car.

In addition, the following tools will be used to build the entire design:

1. A hammer;
2. Hacking or Bulgarian;
3. Pipe bender. It is necessary throughout the assembly of the frame, through this tool it is possible to bend pipes in the corners in the form of arcs, for good fixation of the whole structure;
4. Welding machine. This tool will be needed for feathers and welding plug pipes.

Where is it better to purchase spare parts?

In principle, for independent assembly of this bike, supernatural and expensive spare parts will be required. All that is necessary for the majority is at home.

Such details as pedals or wheels, it is possible to buy in the shops of the bicycle parts. But the pipes and boards, optimalize in building stores.

Cyclists reviews - Is it worth doing?

"In the distant past, I am engaged in experienced bicycle sports. I caught on different bikes, here it was relatively not so long ago to get carried away the drifting of the Great. Yes, it is really a fascinating occupation. Bike for drifting made himself. At first, he considered that it would not be done but at the time when it fell for this thing, I realized nothing in this difficult. Indeed, previously studied the whole process of creating this transport. Mainly make faithful drawings, and another will be soon!

Yes, and the costs are not big. Better than buying a brand and dear Tryk Drift! ".

Oleg, 40 years

"Drifting is my passion. In the distant past I am engaged in this direction. The bike made himself.

I believe that it is better to make it yourself than to buy a corporate and for big money. Moreover, with independent manufacture, it is possible to drive a bike under itself and it is very comfortable. Yes, and ride one pleasure! ".

Alexander, 32 years

"Whatever they say, but drifting on a bicycle is a thing! I believe that great for him is optimal about it yourself! Moreover, at the moment there is a whole bunch of guides on the network, how to make it yourself. All you need for its manufacture, has every home.

And at the price it turns out significantly cheaper than buying a branded bike for drift tray. So, it is better to work hard and make an ergonomic bike for drifting with your own hands. "

Maxim, 28 years

service and repair

For the bike made independently special repair does not need. If, it is still suddenly still that it will be broken consistently possible to do it yourself. For example, change the wheels or change protection on tires.

In the event that if the bike for drifting, branded, then in this case everything will be more difficult. In the origin of breakdowns and no states on this bike, optimalize in a special bicycle repair center.

Acquisition of trades and accessories

In case there is no possibility and desire to make Trike, it is possible to purchase it. Buy this tool is possible in shops of cycling or to order through sites on the network. Frequently in stores sell branded and high-quality models of traits.

Overview of the best models

1. Tricycle for drifting Big Wheel Drift Trike. These models are successful in drifting. This is an estimated well-best invention in the drifting area. The whole design is made of the most modern elements. The frame is made of lightly doped steel. Also in front installed engine with power 6.5 hp On the rear wheels, a PVC coating is established, due to which the perfect slide is ensured during the drift. Also on the front fork there is an ergonomic footrest. But there is one defects, this is the price - it is quite high. But he really is worth it, with these qualities and functions;
2. Verrado - tricycle for drifting. This is the electrical tricycle company Local Motors. The model seemed recently, but gaining solid popularity among branded tricycles. The designs of this tricycle are very durable and high-quality. Thanks to the front wheel from the BMX bike, tricycle resistant on drifts. Two 5 inch wheels are installed behind, with a special protective coating of PVC material. The electric motor is installed behind the seat, which supplies a clear and smooth movement. Engine power forms 500 watts. The battery has a long period of operation, one charge is enough by 12 kilometers;
3. Bike for drifting triad. This model is made of high-quality material. The whole design is extremely strong and durable. The frame is made of steel and calculated under growth from 160 to 180. Rear wheels have special protection, which supplies perfect slip on the road throughout the drift. The whole design has a rather huge mass of about 10 kilograms, based on this driving on it to perform very easily and comfortable.

Drifting is a fascinating and at the same time a dangerous occupation, which requires care and great responsibility.

For so that in order to start it to go to buy a three-wheeled tray. It goes without saying, branded models are worth a lot, based on this it is not always possible to resolve high-quality and branded tricycle trail.

In this case, it is possible to make it yourself. The manufacturing process is not so complicated, the most basic good fantasy and patience. Then it is possible to make a high-quality and durable bike for drifting.

Drift Trayk with his own hands!)) 2.0

DRIFT-TRIKE BATTLE BELARUS competitions were conceived to spread the drift trajects of culture, the main idea of \u200b\u200bwhich is the development and popularization of drift trajecting as a sports direction. There are the desire of the organizers in Belarus to achieve the level of European countries where drift traking is highlighted at a high level.

The organizers of this new destination are representatives of three teams from different cities of the republic, and the first competitions were held in 2018 in Minsk on one of the metropolitan autodromes.

It all started as usual, with disputes among the guys who cooler. From here and went the first name # igoroldift # Zamevvminsk #aCoroldift

Initially, the homeland drift tray is considered to be New Zealand, where the first riders began to descend from the vertices of the mountains, in the so-called downhill, on children's three-wheeled bicycles equipped with plastic wheels, because of which the adhesion was lost, and a drift appeared, he was drift.

In Belarusian trains, an internal combustion engine is installed, and the design is a kind of hybrid, where the back of the kart, and in front of the bike / motorcycle. A sliders that reduce the adhesion with the road are stretched on the rear axle over the kart wheels. They are made from PVC pipes. Engine power averages from 6.5 to 13 hp Motors are installed from karting, motoblocks, motor-pump, scooters and light motorcycles, although there are completely crazy models with an engine from a sports motorcycle with a volume of 1000 cm3.

The rules and regulations of the competition are almost identical to the rules of the automotive drift. Everything happens, as in a large motor sport: training, qualifications and paired races in the top. All this is evaluated by the judges.

Ilya Turchevich, Denis Belyanin, Andrei Dryuzhkov, was already trying as judges. This year, Alexey Mancheshevich will be added to them

This is what the site was told for the portal. One of the organizers of the competitions, which will be held within the framework of the exhibition "", which will be held under Minsk April 13-14 in the spheral of the TC site "Globus Park": "The race last year has shown a great interest in society in this sport. And the culture as a whole, so this year we decided to spend a series of tournaments at different festivals, and at the end of the season the final stage will be held, where the Crown of King Drift will be used to the best of applicants. Stages will be in Minsk, Gomel and Brest, according to the territorial location of the organizers and drivers drift traffic drift. There will also be summed up the total season and the best pilots and teams will be called. "

This year, Drift Trike Battle promises to become international, because the applications filed teams from Russia, Poland, the Czech Republic, Ukraine, saying such teams like Drift Trike Brest, Drift Trike Gomel, Drift Trike Minsk, Tornado Trikes, Ride, K & S Motorsport, VTK-Drift , DAV-Castoms and others.

In competitions, there may be absolutely anyone.

For the holders of trains and team members participation while free.

Also for participation, you can rent Trike in some teams. The cost of about 30 rubles. But it is necessary to understand that without the experience of driving, there is nothing to do there. For which workouts are held, as well as rolling of traits for rolling in free style.

The list of commands is formed, they can be viewed in official groups in Soc. Networks:

inst - drifttrikebattle.
VK - Drift Trike Battle Belarus
Facebook - Drift Trike Brest

Recall once again that the opening of the season will be held April 13-14, as part of the exhibition "MotojoExpo".

MotoLexpo - 2019.
VI-I am International Exhibition
Belarus Castom and Tuning Show - 2019

In a programme!
- Republican Motorone Opening Together with Iron Pride MC Motion
- Open cycle country cycle
- Open Championship of Belarus on cycling
- Open on Drift-Traking
- Open Castomasing Championship and motorcycle airbrushing
- Open Bicycle Castomasing Championship
- Exhibition Retro Mototypes
- Castom Drag
- Food Court and BBQ Fest
- Children's zone
- competitive program and speeches of groups
- Tat, haircuts
- Move is another ...