Answer:
Disks.
Dimension. The 2007 Toyota Corolla is fitted with wheels in the following dimensions.
For cars equipped with a 1.4 l engine:
Steel stamped disks with dimensions 6JхR15 5х114.3 × 60.1 ЕТ39, where:
1.6J * R15. 6J - rim width. R15 - rim diameter in inches
2.5 * 114.3 - drilling
4. ET 39 - Departure
For cars equipped with a 1.6 l engine:
Cast or stamped disks with dimensions 6.5JxR16 5x114.3 × 60.1 ЕТ45, where:
1. 6.5J * R16. 6.5J is the width of the rim. R16 is the diameter of the disc in inches.
2.5 * 114.3 - drilling
3.60.1 - diameter of the inner hole
4. ET 45 - departure
Permissible deviations.
1. Departure ET42.
2. Only for cast and forged wheels (!), The center hole 60.1 mm may differ from the standard one in a larger direction. In this case, the installation of plastic centering rings is required to compensate for the difference in size.
Fasteners.
When switching from standard stamped discs to cast or forged discs, you need to purchase special fastening nuts from the disc seller.
Rubber.
Dimension. Tires of the following dimensions are installed on the Toyota Corolla 2007 model year:
1. For cars equipped with a 1.4 liter engine. - 195/65/15;
2. For cars equipped with a 1.6 liter engine. - 205/55/1
Toyota Corolla is, first of all, convenience and comfort. When purchasing wheel structures, you should follow the manufacturer's recommendations. When selecting car wheels for Toyota Corolla, you should focus not only on their aesthetic characteristics, but you need to carefully study the main parameters showing the compatibility of products with wheels intended for auto. When choosing discs for a Toyota Corolla, you need to take into account the volume of the car's engine, since the braking systems may differ. The dimensions of the wheels permissible for installation depend on this indicator.
Both cast and stamped disks can be installed on a Toyota Corolla car. The model (E140 / E150) has a variety of designs. The suspension of each modification has its own design features, which directly affects the choice of the product. Therefore, before purchasing discs for the "Corolla" 150, be sure to check the basic parameters by studying the appropriate section of the factory service documentation.
Wheels for Toyota Corolla
Features of the choice of products by standard sizes and recommendations of the concern
- If you need to change wheels at a minimum cost, you should buy "stamping". This is the cheapest option. It has only one drawback - outdated design.
- Cast models look much more beautiful, but the cost of these products is high. They are distinguished by a variety of performances.
- A steel product can be repaired, a light-alloy product cannot be repaired if damaged.
When installing original disks on a Toyota Corolla 150 body, you need to choose factory components, since counterfeit products will not last a long time.
When developing original structures, the manufacturer completely changed the operation of the wheel system, adding the latest elements. Accordingly, the factory original will serve the car owner much longer.
Many people wonder what to do if there are no original components of the famous Toyota Corolla brand on sale. In this situation, analogs should be selected. Initially, the car owner must determine what type of disc needs to be installed, and whether a bolt pattern is necessary.
This figure is the diameter of the hole that holds the bolts. When choosing a product, the buyer should pay attention to each parameter. In that version, if the bolt pattern of the structure does not suit the modification of a certain brand, then it will be installed not on the axial principle.
The appearance of the vehicle does not change. In this version, only the safety characteristic changes for the worse. If the discs are not installed axially, it will negatively affect the suspension and steering system of the vehicle.
This parameter can be measured in different ways. As a rule, the basic information on the bolt pattern of disks for various brands, including models, contains the necessary information. Sometimes you need to calculate the bolt parameter on your own.
Elements that have 3 holes - 1,155, 4 holes - 1,414, with 5 bolts 1,701. Sometimes a caliper is used to calculate this indicator.
Options
Product parameters
Particular attention should be paid to the dimension of the product. Indeed, on the Toyota Corolla 2007 model year, rims are mounted in the following dimension. Some cars equipped with a 1.4 liter engine have the following parameters: stamped steel disks with their dimension 6JxR15 5 × 114.3 × 60.1 ЕТ39, where 6JхR15. 6J - rim width, R15 - diameter in inches, 5 × 114.3 - drill, 3.60.1 - inner hole diameter, ET39 - offset.
On a note.
These include cast or stamped products, the dimension of which is: 6.5JxR16, 5 × 114.3, 60.1, ET45, where:
- 6.5JxR16. 6.5J is the width of the rim. R16 - disc diameter in inches;
- 5 × 114.3 - drilling;
- 60.1 - diameter of the inner hole;
- ET45 - departure.
The tolerances presented below are also distinguished.
Departure
It is ET42. For cast and forged wheels only.
Note!
The central hole 60.1 mm may differ from the standard one in a larger direction. In this case, the installation of plastic centering rings is required to compensate for the difference in size.
Fasteners
When switching from standard stamped discs to cast or forged discs, you must purchase special fastening nuts from the disc seller.
Rubber and its dimensions
Tires of the following dimensions are installed on the Toyota Corolla 2007 model year:
- For cars equipped with a 1.4 l engine - 195/65/15;
- For cars with a 1.6 l engine - 205/55/1.
Specifications
Design characteristic
In the model "Toyota Corolla" E 150, the wheel bolt pattern is made according to the pattern of five holes arranged in a circle with a diameter of 114.3 mm. The drilling of the disc has the familiar 5 × 114 marking. The Corolla 150 with this drill comes in five types: 6JxR15 ET39, 6.5JxR16 ET45, 6.5JxR15 ET39, 7JxR16 ET45, and 7JxR17 ET45. They range in width from 6 to 7 inches, and the disc size ranges from 15 to 17 inches.
The overhang is presented in two options: 39 and 45 mm. All types have the same rim flange (J) and radial design (R).
- Auto production period: 2006-2013.
- Body code: E150, E150FL.
- The number of mounting holes and the diameter of the circle of their location (LZ * PCD): 5 × 114.3.
- Car hub diameter (DIA), mm: 60.1.
- Product diameter R, inches: 15-18.
- Departure (ET), mm: 30-46.
- Recommended width, inches: 6.0-8.5.
- Wheel fixing: Nut M12 * 1.5.
Note!
For Toyota Corolla 150, the manufacturer provides five types of tires: 195-65 R15 91H, 195-60 R15 88T, 205-55 R16 91V, 215-45 ZR17 87W, 225-45 R17 93V.
Rubber for "Toyota Corolla" has a diameter of 15, 16 and 17 inches. The greatest variety in the tire model is made by load indices, as well as speed. According to these parameters, all models differ. Regardless of the listed features, the manufacturer recommends an optimal tire pressure of 2.2 atm.
How to choose the right size of original alloy wheels for Toyota Corolla 2008 120 body
Choice of designs
Choosing the right wheel rims for Toyota Corolla means taking into account all the parameters of the standard sizes of tires, rims and fasteners, which have their own specifications depending on the model, year of manufacture, types of body configurations, and also the engine. Toyota Corolla in the 120th body was produced from 2003 to 2008 in different versions for the American and European markets: each new generation had its own differences in chassis, was equipped with gasoline and diesel units of different power.
In addition to the technical parameters and dimensions, when choosing discs, one should take into account the type of materials from which they are made, the characteristics also affect the quality of the wheels.
There are five main types of rim materials:
- Stamped standard - standard with low weight and the same type, which are made of steel.
- Expensive cast products that are made from aluminum material. These discs are highly durable.
- Forged is the ideal option in terms of strength and reliability. For the production of these products, specialists use solid metal using the hot forging method.
- Composite - such materials in the manufacture of car rims are used for premium sports brands, where it is required to withstand heavy loads at high speeds.
- Typesetting products are the most expensive, they combine different materials due to their special design.
The parameters of the width of the structure, as well as the diameter, are represented by a large number of values. They are 5.5, 6 and 7.5 in width, and in sizes 14, 15, 16 and 17 inches. Large wheels make it possible to fulfill the dream of many car enthusiasts who want to change the appearance of the car for the better. However, it must be remembered that there are always pros and cons of large-diameter discs. There are four models on the market that have a disc protrusion of 45 mm and only one 40 mm. They are all radial in shape and are designated J.
Note!
E120 disc marking: 5.5JxR14 ET45, 6JxR15 ET45, 6JRx16 ET45, 6JxR16 ET45, 7.5JRx17 ET40.
Tips for choosing discs Serial cars of the new generation are equipped with factory disks. They range in size from 13 to 17 inches. The nominal dimensions of the disks on the "Toyota Corolla 120" are set depending on the year of manufacture and the type of engine 14, 15, 16 inches. Many car owners choose larger sizes to improve the ride quality of their car.
If the car owner installs the same discs alternately, for example, winter or summer tires, then balancing cannot be avoided in this case. The question of balancing every season arises only for those car owners who have two complete sets of wheels: summer and winter.
The wheels need to be balanced immediately after the tire is mounted on the rim: after all, the imbalance can reach 50-60 g on each side.
The choice of tires is associated with the definition of the specification, standard sizes and pricing policy. Toyota Corolla is a budget car. Therefore, the middle price segment allows the buyer to choose tires of the middle or economy class.
Typically, tire widths have the following values: 175, 195, 205 and 215, in combination with profiles: 70, 60, 55, and 40, as well as diameters: 14, 15, 16 and 17. This indicator determines the unique size of each rubber type.
The manufacturer has set the tire pressure indicator for all types of tires, which is 2.2 atm.
In addition to the standard size, the tires differ in the season of operation. According to this indicator, tires are presented as winter, summer and universal. To ensure resistance to high temperatures, hard rubber is used for the production of summer tires.
For winter with harsh climatic conditions, tires are made of soft rubber. Summer and winter tires differ in shape, as well as tread depth and studs. When buying products for a car, it is necessary to take into account the seasonal features of operation: frost, snow, ice in winter and heat, water, mud in summer. However, to improve the handling of the vehicle during the season, summer and winter tires are also provided with different tread patterns.
Specialist recommendations Radius R16, R17, R18
For R15 and R16 Corolla wheels, the manufacturer recommends inflating the wheels to 2.2 bar both front and rear.
For a more comfortable movement, you can try to lower the wheels a little to 2.0 bar. Not all car owners lower their wheels to such a value, but some who have tried it claim that the ride becomes more comfortable, the bumps are practically not felt.
R16 summer wheel set for Toyota Corolla 2006-2012: Original Toyota 6.5 × 16 ET45 5 × 114.3 × 60.1 alloy wheel, their tire wear rate is 25%.
The wheel arches on the car are large enough. As a rule, fans of extravagant solutions may prefer 17-18-inch wheels.
Note!
Note! R17 wheels with 215/40 ZR17 tires are slightly stiffer due to the profile of the rubber and the size of the structure. Their main advantage is sustainability.
R18 wheels with 215/35 ZR1 tires are lower, since when installing structures with a higher radius, the car rises slightly (the clearance increases, as well as the distance between the wheel and the wing).
The car rides comfortably on 18 inch wheels. Even at the maximum turn of the steering wheel of 225, the rubber gets in and does not rub, the chassis is quite strong.
In conclusion, it should be noted that the variety of wheels "Toyota Corolla" allows you to optimize the ride, but complicates their choice. An error in selection by standard size can increase the load on the vehicle's chassis and lead to costly repairs. To avoid unnecessary financial costs, the manufacturer recommends choosing original tires. In addition, the correct tire type for the season should be used. The fulfillment of these two conditions will make driving a car comfortable and safe.
Using automatic selection of tires and wheels for the car Toyota corolla, you can avoid many problems associated with their compatibility and compliance with the recommendations of the car manufacturers. After all, they have a huge impact on a significant part of the vehicle's operational properties, primarily on handling, fuel efficiency and dynamic qualities. In addition, tires and rims in a modern car are one of the active safety elements. That is why the choice between them should be made as responsibly as possible, which presupposes the presence of a whole range of knowledge about these products.
Unfortunately, or, on the contrary, fortunately, a significant part of motorists prefer not to study the technical device of their own car thoroughly. Regardless, the automatic selection system will prove to be extremely useful, as it will minimize the likelihood of incorrect selection of wheels or tires. And he, thanks to the widest assortment presented in the Mosavtoshin online store, is very diverse.
Have you noticed how many admiring, and sometimes envious glances stop at your Toyota Corolla, because the wheels you have chosen give it such an original and unique look. This means that the right combination of practicality and uniqueness of the car's external appearance has been found. But do not go too far, because the main trouble lies in the details, follow all the recommendations for tuning wheels, and then driving will not bring you a lot of problems.
Ice rink selection
Disks, or rollers, operated by Toyota Corolla before 2012, can be steel or light alloy. Blanks for steel products are made by stamping. Conventional steel rollers are welded from these stamped blanks, but they are not resistant to corrosion and are difficult to balance. Such discs are easily deformed and easily straightened, but they serve quite a long time.
For cast products, an alloy of magnesium and aluminum is used as a material, and such rollers are made by casting in a mold or by forging. Alloy discs are very light and work optimally without loading the car's suspension, but they are more expensive than steel discs. Forged products are more durable and withstand shock loads well, but their price is much higher than that of light-alloy ones.
Rim relief
The most intelligent decision would be to choose original wheels for Toyota Corolla.
You need to understand why these rollers are optimal and non-destructive for suspension. In this case, it is necessary to deal with such a concept as wheel bolt pattern.
The manual for the Toyota Corolla spelled out what this notorious blabbering should be. It clearly states that in cars produced from 1999 to 2001, this parameter is 4x100 mm, and in subsequent years it became 5x100 mm. In fact, this means that the diameter of the circle on which the holes for the bolts (studs) are located is 100 mm, and the number of these bolts is four, and for later models - 5 bolts.
The bolt pattern has the designation PCD and is calculated as follows: the distance between adjacent holes for the studs (bolts) is measured with a vernier caliper and the result obtained is multiplied by a factor of 1.701 - we get the bolt pattern of the existing roller. Such a parameter is needed in order to drill a custom roller, which has a smaller overhang and a larger diameter, and a wider rubber is placed on it.
Toyota custom wheels and bolt pattern
Choosing wide and large-diameter rollers for the car, we thereby increase the ground clearance, but the profile becomes smaller, the suspension system is more loaded and does not work out the unevenness of the road so confidently. The loaded body sags, the arches rub against the tires and wheel wear is faster.
On the contrary, when the rubber profile is larger and the disc diameter is smaller, the stability and controllability of the car deteriorates, especially in corners and at high speeds.
So you need to choose custom rollers for Toyota Corolla only after considering all possible consequences, and entrust the drilling work only to highly qualified craftsmen.
To choose the right roller, you need to know not only the Toyota Corolla bolt pattern, but also such parameters as:
- The rim width - 75% of the tire width is the desired value.
- Reach or overhang is the distance between the roller mount and the rim plane of symmetry.
- The center hole of the disc must be equal to the hub seat.
- Rim Size - Usually measured in inches.
As for the bolt pattern of the Toyota Corolla over the years, the cars from 1999 to 2001 had a bolt pattern of 4x100, the extension of the roller is 38 to 45 mm. The size of the central hole (CO) is 54.1 mm.
Cars from 2002 to 2008, this also applies to 120 bodies, differed only in bolt pattern, it was 5x100. For the E 150 body, the stem changed from 2006 to 2013, it became 39 to 42.
For other models from 2002 to 2012, only the disc offset was different - 34 to 45. The bolt pattern from 2002 to 2012 for all models and bodies remained the same - 5x100 mm.
Conclusion
Only one conclusion suggests itself - you should not make a choice of non-standard wheels to please your ambitious plans, this only destroys the suspension and makes the car unstable and uncontrollable, exposing yourself and other cars to danger. There are many other ways to satisfy your ambitions.
Toyota Corolla is one of the oldest models offered by the famous Japanese manufacturer. Over the years of production, 11 different car models have already been released.
Each new version added something new, making the car relevant for its time. For each model, there are ample opportunities for independent car design - for example, you can install one of several types of rims.
Basic solutions
The standard factory equipment provides that the wheel rims of the Toyota Corolla must be 16 inches, while the tire parameters will be 205/55. To achieve better vehicle stability, you can opt for larger rims - R17. Accordingly, the tire dimensions will also be changed.
When selecting dimensions, it is very important that all parameters comply with the recommendations provided by the manufacturer. Installing non-standard parts will violate warranty requirements. In addition, it should be borne in mind that the dimensions may differ depending on the power unit installed in the car and the year of manufacture of the vehicle.
Why is it necessary to know the exact parameters of the parts? The names and sizes of parts related to the wheel group of the Toyota Corolla, the owner must know exactly. The same applies to the required tire pressure. Such information may be required:
- during maintenance;
- when changing tires for the season;
- for repairs caused by wear or road deformation.
It will be easier for specialists to determine the necessary components if they receive information on the dimensions of the spare parts. Focusing only on the make of the car or even on the wheel provided, making the right decision is much more difficult - accordingly, the risk of getting parts that simply does not fit the existing wheel group increases.
The wheel disks of the 11th series Toyota Corolla have the following parameters:
- For a diameter of 15 inches: ЕТ45 6JхR15 5х114.3, rubber under them must have the characteristics 91H 195 / 65R15.
- For a diameter of 16 inches: ЕТ45 6.5JхR16 5х114.3, with 91V 205 / 55R16 rubber.
Decoding according to the symbols used in the marking:
- ET is a disk departure indicator. It is a constant value and is not determined by the design of the vehicle. For one model, the value is always constant.
- 6 is the width in inches.
- J - rim flange, shape designation.
- R15 is the landing dimension in inches.
- 5х114.3 - holes for fastening, their number and diameter.
Casting or stamping
Now car owners are increasingly choosing for Toyota Corolla not standard stamped wheels, but alloy ones. They prefer to use such discs primarily because of aesthetics - they look much more impressive. However, stamping has proven itself much better in operation, especially with frequent driving on bad roads with an abundance of irregularities.
The appearance of a dent on a stamped part is a completely fixable defect, while a crack on the casting can no longer be corrected - such a product must be replaced.
The Toyota Corolla wheel rims offered on the market are very high quality parts. Reliable light-alloy materials are used for the production, due to which the spectacular appearance remains for years, as well as protection against corrosion.
