What is a movil for a car. Movil for a car or how to protect the body from rust. What precautions must be taken

Many novice car enthusiasts are interested in how to use Movil for cars. After all, this, not so long ago, a popular drug, is now ousted by other, often less high-quality substances. On the packaging itself, there is practically no information on what to do with the drug. At the same time, improper use leads to a decrease in the effectiveness of the drug. Therefore, it is extremely important to do everything accurately and correctly. This will significantly extend the life of your vehicle body. Knowing the characteristics of this substance, you are guaranteed to achieve the optimal effect.

Specifications

How to use Movil for a car? To answer this question, you need to understand its features. To begin with, it should be noted that Movil is a preservative. This allows it to be used not only on existing vehicles, but also for corrosion protection of various metal structures. The drug was created back in the days of the USSR. A joint group of scientists from research institutes in Moscow and Vilnius worked to achieve optimal performance.

The composition of the substance is rather complex. In addition to machine oil and varnish, this includes a variety of inhibitors. It is their presence that explains the possibility of active protection of body parts from corrosion. The material is quite fluid, but with the correct application, it is possible to create a protective layer of optimal thickness. When buying, pay attention to the expiration dates. The substance retains its properties for 24 months from the date of production.

When to apply?

The most optimal option is early processing. That is, you should not wait until your car “blooms”. Therefore, experienced motorists process the bottom and sills of the car every 2 years, and those living in large cities before every winter. Otherwise, the body will rot in a few seasons.

Some people process Movil after the appearance of rust. This is not entirely correct. The fact is that this drug does not remove rust. Its task is to prevent the contact of iron with oxygen contained in the air. Thus, the possibility of the formation of foci of corrosion is excluded. But, if Movil is applied to an area already damaged by rust, it will not stop the spread of damage. Therefore, we can consider that this substance is rather a preventive measure. Also, the protective film has excellent moisture-repellent properties.

Mode of application

This protective compound fits well on any paintwork. This makes it much easier to operate. You also need to remember that Movil should not be applied to rust. Scrape the corrosion area down to bare metal. Also remove dirt from the surface of the work piece. It is recommended to degrease the surface before starting treatment, but this is not necessary.

A distinctive feature of Movil is the use of the material both outside and on the internal parts of the body. It perfectly resists various mechanical stress. Due to its plasticity, you will not experience problems with applying the material to the walls of hollow cavities.

Movil is applied by spraying on the surface of the part. This is the most optimal option for processing. Consumption per layer 400 g / m2. For greater reliability, processing is usually carried out in 2-3 layers. Each subsequent layer is applied after the previous one has dried. At a temperature of 20 ° C, the substance dries completely in 1-2 hours. After drying, it does not smell and does not smudge. You can determine the moment of drying by appearance. The surface turns brown.

Application features

Movil does not interact well with synthetic mastics. It loosens them, which causes a decrease in the effectiveness of protection. You should not use it in cases where your thresholds and bottom are treated with mastic. As a last resort, the mastic should be removed from the vehicle. When applying, make sure that Movil does not get on hoses and other rubber parts. This substance is quite corrosive to rubber and will probably corrode it.

Security measures... Carry out work on processing in goggles and a respirator. Movil is pretty toxic. Therefore, do not allow it to enter the respiratory tract and eyes. In case of contact with skin, wash off with mineral spirits. Store the material in a closed container.

Conclusion

Often, drivers do not devote enough time and effort to protect the car from corrosion. But, those motorists who nevertheless decide to tackle this problem have questions, one of which is how to use Movil for a car. After all, practically nothing is indicated on the packaging, except for the temperatures of storage and use.

At the same time, there are requirements for the method of application, as well as for the preparation of the car before processing. Often, mechanics recommend completely treating the body with Movil when placing a car for long-term storage.

Movil is a composition for auto-preservation of a vehicle, which got its name from the cities of Moscow-Vilnius, whose engineers developed it. The product contains motor oils, drying oil, inhibiting additives and solvents. How to use Movil for will be described in this article.

Advantages of the tool

Movil is used to protect steel from oxygen and water penetration, under the influence of which iron corrosion begins. An inhibitor-based agent creates a dense protective film on the metal surface, which repels moisture and prevents oxygen molecules from penetrating inside. It can be applied both directly to metal and to a surface covered with paint. The main thing is that the coating does not have a synthetic base. The composition does not have any negative effect on the workpiece and does not require the use of additional drying agents. The only condition is that the work must be carried out at temperatures from +10 to +30 ᵒС.

Application of Movil and its varieties

I must say right away that the composition of the product from different manufacturers is approximately the same. The difference lies in the concentration of certain components, as well as their quality. Some are loyal to auto paint, but they show satisfactory water displacement, and some are distinguished by the worst rise in micro-gap, but they give out the highest rates in terms of heat resistance. Therefore, when choosing a tool, you must take into account your own preferences, but in any case, it should cope with corrosion perfectly and prevent its appearance.

In addition, both liquids and sprays can be found commercially. The former are applied with a brush, and the latter with a spray gun. Both of them form a uniform thin layer on the metal and are consumed in the same way. The consistency, color and smell can also be different and are determined by the volume and quality of the constituent components.

How to use Movil?

Instructions for use:

1. After preparing the surface, cleaning off all the dirt from the metal and then degreasing it.
2. Dry the surface.
3. Apply the first coat of anti-corrosion agent. In easily accessible places, the spray is applied through the spray head, the liquid - with a roller or brush. A spout and tube are used to treat hard-to-reach areas.
4. Drying. To accelerate it, you can direct a stream of warm air to the machine part.
5. Application of the second and subsequent layers, if necessary with intermediate drying.

When using Movil, it must be remembered that the final drying of the composition occurs 2 hours after the last application.

For those who are interested in how to use Movil for thresholds, it is recommended to first remove all rubber elements where they are present, and only then spray the agent from a pistol with a compressor. By the way, rubber is very "afraid" of Movil, so you should always remove all elements from this material before treating with an anti-corrosion agent. For those who ask how to use Movil from rust when repairing the suspension and the lower part of the transmission, you can advise to dip the bolts to be installed in a glass with the composition or thickly smear the threads with a brush before screwing on the nut.

So the product will last for several years and protect body parts from the negative effects of moisture. In this case, you need to work in a well-ventilated area and be sure to use personal protective equipment. The composition that has got on the skin can be easily washed off with white spirit. By regularly using an inhibitor-based anti-corrosion agent, you can extend the life of your car and save money on repairs.

The bodies of modern cars are able to withstand through corrosion for an average of 5 to 10 years, then gradually rust begins to "eat up" the body parts, over time, foci of rust appear on the bottom and wheel arches. In order for the body iron to serve as long as possible, special protective equipment is used, in particular, Movil is used to treat the lower part and hidden cavities of the body.

The anti-corrosion coating protects the metal from premature rusting, which occurs as a result of the negative influence of the environment, the metal corrodes due to interaction with water (moisture) and oxygen. Various bituminous mastics, special chemical compositions applied to the body iron, allow to extend the life of the metal, to postpone the next repair.

Compounds that help protect the body and body parts from corrosion

For a car, the industry has developed various anti-corrosion agents (anticorrosives) that have different chemical components, but perform the same function. The most common brands of protective compounds for body iron:

• Movil of various modifications;
• Dinitrol;
• Noxudol;
• Tektil;
• all kinds of mastics;
• Prim Antishum and stuff.

These preservatives are used to treat the underside of the car and amplifiers, wheel arches, hidden cavities, including doors from the inside, sills, and anticorrosive cover the floor inside the cabin. Important qualities of such preparations are tightness, plasticity, ability to resist moisture and repel it, good adhesion. If water or dirt gets on the metal through a layer of anti-corrosion coating, even in very small quantities, the body will quickly rust, and then premature body repair will be required.

Movil treatment - types of chemicals, methods of application

Such a protective agent against corrosion as Movil appeared in the Soviet Union, the drug was developed by scientists from Moscow and Vilnius, and therefore its name consists of the abbreviated words of these two cities. First of all, the chemical composition was intended for the preservation of cars, its dense elastic layer is able to reliably protect the body iron from the penetration of air and moisture.

The standard components that make up the anti-corrosion coating are drying oil, machine oil, inhibitor additives, solvents are also present, currently there are various modifications of this drug:

• Movil with zinc;
• classic composition;
• with rust converter;
• with natural wax.

Anticorrosives also differ in the method of application, the standard version of Movil is a thick viscous liquid, preparations are also made in the form of a spray, they are sold in aerosol cans. Anticorrosive treatment can be done using a brush or roller, but it is more convenient to apply a layer by spraying the agent under pressure. If Movil is packaged in an ordinary container such as a can, spraying is done using a spray gun, and compressed air is supplied by a compressor.

The modern drug Movil differs significantly from the preservative produced in the USSR, the anti-corrosion agent for protecting the body is now being developed and produced by various companies, it is produced not only in Russia, but also in Belarus and Lithuania. The most famous manufacturers of the drug today:

• Joint Stock Company Nikor (St. Petersburg);
• PKF (Nizhny Novgorod);
• Stesmol (Belarus);
• Agat-Auto;
• Astrokhim;
• Limited Liability Company "Eltrans";
• CJSC "Elf Filling" (the last four companies mentioned above are Moscow manufacturers).

Among motorists, the brands "Movil-NN" of Nizhny Novgorod production and "Movil-2M" from the company "Eltrans" are quite popular, the preservative composition under the Kerry brand ("Elf Filling") is also quite well known. The price of the preservative depends on the brand, the volume of packaging, the seller himself, the average cost of Movil in a 400-1000 ml can or can is from 130 to 500 rubles.

Do-it-yourself anticorrosive protection of the bottom and thresholds

Before proceeding with the treatment of the thresholds and the underside of the car with a protective agent, you must:

• thoroughly clean the surface to be treated from dust and dirt, blow with compressed air;
• before purging, it is necessary to dismantle all rubber plugs in order to gain access to the technological holes and blow out all the dirt from the inside;
• degrease the outer body parts (optional, but desirable);
• heat Movil to a temperature of 50-60 degrees Celsius, dilute it with white spirit (0.2 liters of white spirit is needed for 2 kilograms of anticorrosive).

To fill the thresholds with an anti-corrosion compound, it is necessary to use a powerful compressor and a spray bottle with a "tube" nozzle. All hidden cavities are filled with Movil under pressure, then an even layer of anti-corrosion agent is applied to the bottom surface from above.

When treating with anticorrosive agent with your own hands, it should be borne in mind that the preservative emits a very unpleasant odor, therefore it is strongly recommended to work in a respirator. There is practically no odorless Movil (if you do not take into account imported aerosols in bottles), so you need to tune in that the unpleasant spirit will disappear for a long time.

You can pour Movil into the thresholds without using a spray bottle, in which case you will need a funnel and a piece of rubber hose, mounted in one structure. The cavities are filled with an anti-corrosion compound from above; often, for such work, it is necessary to disassemble the floor in the cabin.

Outside, anticorrosive is applied in two or three coats, the normal ambient temperature for processing is about + 20 ° C. Each layer must be allowed to dry for one and a half to two hours, on average, about 400 g of Movil is spent on one square meter of the treated surface. After drying, the anti-corrosion agent practically does not smell and does not get dirty, it acquires a brown tint.

Using Movil aerosol

The anticorrosive composition in spray cans has its advantages:

• due to the small size of the bottle, access to almost any body surface is provided; for the treatment of hard-to-reach places, the bottle is equipped with a special nozzle-tube;
• to work with a spray, you do not need special equipment and a compressor, you can do the job in almost any conditions;
• as a rule, such a product has a less pungent odor;
• the car can be operated within a few hours after applying the anticorrosive agent.

But aerosols are also not without disadvantages, and the disadvantages are quite significant:

• the composition is not so economically consumed, a less even layer is obtained;
• time for processing large areas of the body takes more;
• a chemical spray is more expensive.

With the help of a spray can, it is convenient to treat small surfaces, for example, a weld seam; before use, the aerosol liquid bottle must be shaken several times.

Movil- a very high quality wax coating that insulates the metal surface from air and moisture, because it containscorrosion inhibitor, which also actively fights rust. In it you can find special additives that give it flow properties, because of which it can easily penetrate into small cracks, seams and joints, and it is also able to push water from painted and unpainted surfaces.

Movil - a wonderful tool to protect from rust places that are hidden (thresholds, door housings, pillars, side members), as well as for temporary protection of the bottom of the body and wheel arches (it is advised to carry it out when the car is put on storage). Movil can be used on surfaces already treated with bitumen mastic, he condenses her from the outside and gets into damaged places, excellentcanning metal... But you should know that Movil is incompatible with synthetic mastics, especially with fresh coatings, which it can spoil. Be careful not to get wax on rubber hoses and car protective covers - they may then be unusable.

From the previous reduction "Moscow-Vilnius" there are only memories of some drivers. "Movil" has become a name todaycommon noun, which denotes a class of certain drugs designed to protect automotive cavities. And if so, then the question of the selling "What" Movil "to you?" will be usual for you, since each manufacturer has its own opinion about this product. Let's find out how these judgments can protect metal from rust.

For our tests, we managed to purchase 7 "Moviles" produced by various companies in Russia, Lithuania and Belarus. Car items 1 and 7 are packed in aerosol containers, the rest are in bottles. During the tests, expertsappreciated Movilby several parameters. We will have 12 of them.

The content of the active substance is an indirect indicator of the "environmental friendliness" of an automobile product: the bigger, the better ... The dropping point proves the film's resistance to heat: the higher it is, the better, again. Heat resistance as a quality characterizes the ability of Movil not to go out through technological holes from the protected boundaries when using the machine. No effect on paintwork. "Raising through a micro-gap" indicates the penetrating properties of the product - they are checked through two tightly compressed steel plates, the edge of one of which will be immersed in the Movil.Good anticorrosiveshould reach a height of at least fifty mm.

Water penetrating into the hidden cavities of the body necessarily brings with it corrosive substances -from salt to mud... Taking this into account, the protective effect of drugs for latent sections should displace water and electrolyte from the metal surface and help the formation of a special protective film on the metal, which interferes with the electrolyte. When testing for water displacement, the quality criterion is the diameter of the water "puddle" into which the drug is injected - the norm is not less than sixty mm, and the measurements are carried out 3 times.

If rust appears on the metal, then it is very important that the protective material penetrates into the rust itself andprevented corrosion from increasing... To assess these properties, experts impregnate a column of rust with a preparation with a height of 25 mm and a diameter of 10 mm - the amount of penetration of anticorrosive material should be at least 8 mm. And they draw their own conclusions.

The most dangerous test awaits the mastic in the chamber where it will be storedsalt... The experience of using formulations for cavities in a car proves that in order to provide excellent protection for about an hour of a year, it is necessary that, when tested in a specified chamber, the samples withstand at least three hundred hours. During this time, about 1-2% of the protected metal can be transferred to rust.

Movil can be bought in the stores of the company "AUTOmarket Intercom", or order through

Rust on the body of a car occurs at different rates, but any car, even new and expensive ones, is susceptible to it. The reason is the impact of aggressive factors - water, salts, reagents, acids. To prevent serious problems, you can use Movil for auto - a product based on rust converters and protective components.

Composition, characteristics and principle of action of Movil

The abbreviation "MoVil" was formed from the names of the cities (Moscow and Vilnius), in which this anti-corrosion compound was first created. Now Movil is not a specific product, but a whole direction in the production of anti-rust agents, which are produced by various companies in Russia and the CIS countries.

Movil is understood as a universal anticorrosive in the form of a liquid, spray, paste of black or dark brown color, intended for treating the body and hidden cavities of a car. Also, the tool will help keep the elements of the car intact and protect them from rust if it has to be put on storage.

The composition of the product is rather complicated. It is represented by the following ingredients:

• solvent white spirit;
• paraffin;
• zinc;
• machine oil;
• calcium sulfonate;
• kerosene;
• drying oil;
• modifying additives;
• corrosion inhibitors;
• thixotropic substances;
• moisture displacement additives;
• deodorant components.

Movil is suitable for any base materials, fits well on painted and unpainted surfaces, does not require prior removal of bitumen or mastic insulation. The product is incompatible only with synthetic mastics - the latter become loose, exfoliate from the base. Also rubber products react badly to Movil's hit - the composition can damage them.

Due to its thixotropy, the agent quickly flows into the smallest cracks, microscopic chips, fills them and creates an active anti-corrosive film. A thin oily layer prevents rust formation by isolating the metal from moisture, air, aggressive chemicals - the culprits of corrosion. Movil works as a rust converter, eliminating already formed foci due to the presence of special additives.

Movils of different brands can differ in density, freezing point, and other indicators, but for most products, the technical characteristics are close to the following:

• spreadability on metal - up to 10 mm;
• the share of volatile substances - up to 57%;
• density - 840-860 kg / sq. m;
• time to complete drying - about 120 minutes;
• corrosion resistance in sea water - 99%.

What surfaces is Anticorrosive Movil intended for?

Movil with rust converter can be used on any metal base. They are allowed to work on corrosion, as well as on undamaged metal, painted and varnished surfaces. Most often, car owners prefer to use a composition for processing closed cavities and complex elements:

• front roof pillars - condensation accumulates on them, which over time causes the appearance of rust;
• thresholds - the presence of holes on the parts provokes the penetration of moisture;
• hidden cavities in the trunk - felt can accumulate water, which increases the risk of corrosion;
• the inner surface of the doors - condensation, dirt appears here constantly;
• seals attachment areas - moisture regularly accumulates under the sealing elements and causes rusting of the metal.

It makes no sense to apply Movil on the bottom, wheel arches, open body parts - it cannot boast of high mechanical strength (the exception is special Movils of increased strength). Also, due to the strong chemical odor associated with the presence of the solvent, the product must not be used inside the car. It is forbidden to spray Movil onto rubberized parts, as well as surfaces with a layer of synthetic mastic.

How to choose a product

The selection of Moviles on the market is extensive, there are products in a spray can and pasty, liquid in cans and on bulk. The shape of the product is selected depending on the area of ​​application. If you plan to treat hard-to-reach places, you should buy an aerosol with a special long nozzle (flexible tube). The dispensing agent needs a special pistol for Movil - the composition is filled into a similar device, after which it will be convenient for them to handle even large surfaces.

The highest quality, according to the reviews of motorists, is distinguished by Movili made in Moscow and St. Petersburg, and products from Lithuania usually have less efficiency in action.

Also in stores there are so-called long-drying Movils, which have higher elasticity, are thick, create a strong protective layer that does not react to mechanical damage.

Movile Manufacturers

Most often, you can see the following brands on the shelves of automotive stores:

• Astrokhim;
• Agat-Auto;
• "Eltrans";
• "Development of PKF".

All of these compositions are of excellent quality and are appreciated by car owners and craftsmen. Usually, the preparation in a can is much more expensive than liquid Movil, which is applied with a brush.

How to use Movil

The composition can be applied to metal, cleaned to a "bare" look, as well as to painted and primed base. In the cold season, it is better not to use the agent - the effectiveness of the treatment drops already at +10 degrees. If the weather is too hot (above +40 degrees) Movil is also not used, so the best time to work with it is late summer, spring, early autumn. In order to avoid damage to rubber parts, they must be removed in advance or securely closed.

Car preparation

Areas for future processing by Movil should be well prepared. They are cleaned of dust, dirt, and a portable car wash with a water jet pressure of 60-100 atmospheres is best suited for this purpose. If the product is to be applied to the bottom, then the machine is washed on a lift. In order to remove oil stains and deposits of petrochemicals, special detergents are used.

When a part of the car is already covered with a thick layer of rust, the latter must be cleaned with sandpaper or a grinder. This point especially applies to loose rust, which, after processing with Movil, will immediately begin to flake off. The same rule applies to cracked paint. Immediately before work, the surface is dried in the open air or by a forced method (for example, by connecting a compressor). Deep chips, pits on the metal are sealed with auto putty before using anticorrosive material.

How to dilute Movil

The composition with zinc and corrosion inhibitors in the form of an aerosol is sold ready-made, and it cannot be diluted, and it should not be. The same rule applies to liquids in cans, cans: the addition of solvents and other substances will increase the fluidity of the composition, while reducing its quality. Of course, when pouring in white spirit, solvent, the agent will dry even faster, but the strength characteristics of the film will greatly decrease. At the slightest impact, the formed coating will break due to poor surface tension.

Pasty Movili sometimes thicken too much and require dilution, otherwise it is rather difficult to apply them. Do not use solvents: it is better to slightly warm the composition in a water bath to make it more liquid. Gentle heating is allowed as many times as necessary.

How to apply Movil

It is important to apply the product in a uniform layer, the thickness of which after drying will be 40-60 microns. Movil consumption in this case will be approximately 400 g per square meter of surface. The agent is most effective when applied in several layers (usually 2-3).

Movil is sprayed onto the base from a balloon with a long thin nozzle or work with a pistol. Since the application is carried out under pressure, the active compound penetrates into all cracks, cracks and hard-to-reach places. On open areas and large areas it is better to apply Movil with a brush. It is necessary to observe the time of intermediate drying of the layers (20–30 minutes), as well as maintain the period until Movil is completely dry (2 hours or according to the manufacturer's recommendations).

Tips for working with anticorrosive are as follows:

• before starting, it is worth applying the product to the trunk, the door to see how it spreads - in the future it will be possible to navigate by the most comfortable method of spraying and the approximate consumption;
• if the composition gets on the paintwork, it must be immediately wiped off with a soft cloth - then it will be difficult to do this;
• after applying Movil, a pungent odor often remains in the car, which can be removed only by leaving the car windows open for at least a couple of hours a day (at first);
• if airing the car does not help in getting rid of the "aroma", you can use carbon odor absorbers;
• Ideally, do not use the machine for 2–4 days after applying the coating, and only then allow it to be used.

Hollow cavity treatment

To process the internal cavities of the machine, first dismantle all elements that are removable and can interfere with the work process. If possible, and there are drainage holes, they are rinsed and dried with a stream of warm air. If old rust is present, it is removed with a converter and washed with an alkaline solution. Next, attach the nozzle tube to the can, insert it into the cavity and spray Movil.

Bottom treatment Movil

The bottom must be treated with particularly strong compounds, because it is subject to strong mechanical stress. Usually, this body element undergoes anti-corrosion treatment at the factory, but as the influence of aggressive factors, the protection weakens. In this case, the work should be repeated by choosing a long-drying Movil.

The procedure is as follows:

• wash the car, put it on a pit or overpass;
• to clean the metal to a shine in places where there is already rust;
• remove swellings, layers, rotten holes, weld, cutting off all damaged areas with a grinder in advance;
• prime the metal;
• dismantle elements interfering with work;
• turn off the fuel supply valve to the system, acting especially carefully in the presence of gas equipment;
• dry the bottom well with warm air;
• apply Movil in 2-3 layers with a brush, by airless spraying;
• dry for 2 hours;
• assemble the car by attaching all the removed parts.

Threshold handling

Applying anticorrosive to thresholds is laborious, but necessary to prevent the development of corrosion. To begin with, a partial disassembly of the cabin is performed, removing all plastic elements. When removing the pads, you need to be careful with the clips and latches - if you break them, the elements will rattle heavily while driving. Then you need to do the following:

• unscrew the noise insulation;
• find ready-made holes or drill them along the outer part of the thresholds (the second method is undesirable);
• apply Movil from a spray can, inserting a thin nozzle directly into the hole;
• press the spray, fill the walls of the rapids with Movil (use at least 1/3 of the spray for each);
• let the product dry completely;
• close the drilled holes with rubber inserts (buy them separately at a car dealership).

Door processing

Usually doors start to rust from the underside. If elements of corrosion appear on them, you need to clean the area, prime, paint, and only then process with Movil. The holes are welded or sealed with auto-putty, although the second method is short-lived. After that, the window handles are removed, the fastening screws and bolts are unscrewed, the latches are taken out, the door cards are removed. If wires enter them, they are carefully disconnected, recording the correct connection. Then you can wash the door, dry it and apply Movil. As it dries, all removed items should be returned to their place.

Arches processing

To apply the product to the arches, first remove the wheel arch liners by unscrewing the screws with a Phillips screwdriver. Then the arches are well washed and cleaned, dried and anticorrosive applied in a standard way. In order to easily unscrew the screws in the future, you can treat the place where the bolts are screwed in with machine oil.

If the temperature is close to the lower permissible limit for operation (+10 degrees), the drying time will increase to 3-5 hours, in hot air it will decrease to 1.5 hours. During the specified period, Movil will form a pliable film, which will continue to thicken for another 10-15 days.

How to wash Movil

Since aggressive solvents cannot be used on the paintwork of a car, it will not be easy to remove dried Movil. It is permissible to use aviation kerosene, isopropyl alcohol, a mixture of turpentine and laundry soap (50:50). You can also scrub Movil with gasoline, but after removing the stain, you must immediately rinse the part with water and car shampoo.

Precautionary measures

It is worth working with Movil outdoors, as its fumes are toxic. If it is applied in a garage, it is important to provide good ventilation, otherwise the health consequences will be serious. It is imperative to wear a respirator, goggles, gloves and do not allow Movil to come into contact with the skin. The product is highly flammable, and you need to work with it away from sources of heat and fire!

If you regularly inspect the car, assess its condition and perform anti-corrosion treatments, the parts will last an order of magnitude longer. To fight rust, you should use Movil, which boasts affordability and excellent quality.